videomode: combine videomode dmt_flags and data_flags

Both videomode and display_timing contain flags describing the modes.
These are stored in dmt_flags and data_flags. There's no need to
separate these flags, and having separate fields just makes the flags
more difficult to use.

This patch combines the fields and renames VESA_DMT_* flags to
DISPLAY_FLAGS_*.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>

drivers/gpu/drm/drm_modes.c

@@ -523,17 +523,17 @@ int drm_display_mode_from_videomode(const struct videomode *vm,
 	dmode->clock = vm->pixelclock / 1000;
 
 	dmode->flags = 0;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		dmode->flags |= DRM_MODE_FLAG_PHSYNC;
-	else if (vm->dmt_flags & VESA_DMT_HSYNC_LOW)
+	else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW)
 		dmode->flags |= DRM_MODE_FLAG_NHSYNC;
-	if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)
 		dmode->flags |= DRM_MODE_FLAG_PVSYNC;
-	else if (vm->dmt_flags & VESA_DMT_VSYNC_LOW)
+	else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW)
 		dmode->flags |= DRM_MODE_FLAG_NVSYNC;
-	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		dmode->flags |= DRM_MODE_FLAG_INTERLACE;
-	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
 		dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
 	drm_mode_set_name(dmode);
 

drivers/video/fbmon.c

@@ -1398,13 +1398,13 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 
 	fbmode->sync = 0;
 	fbmode->vmode = 0;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
-	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+	if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
-	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		fbmode->vmode |= FB_VMODE_INTERLACED;
-	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
 		fbmode->vmode |= FB_VMODE_DOUBLE;
 	fbmode->flag = 0;
 

drivers/video/of_display_timing.c

@@ -79,25 +79,24 @@ static struct display_timing *of_get_display_timing(struct device_node *np)
 	ret |= parse_timing_property(np, "vsync-len", &dt->vsync_len);
 	ret |= parse_timing_property(np, "clock-frequency", &dt->pixelclock);
 
-	dt->dmt_flags = 0;
-	dt->data_flags = 0;
+	dt->flags = 0;
 	if (!of_property_read_u32(np, "vsync-active", &val))
-		dt->dmt_flags |= val ? VESA_DMT_VSYNC_HIGH :
-				VESA_DMT_VSYNC_LOW;
+		dt->flags |= val ? DISPLAY_FLAGS_VSYNC_HIGH :
+				DISPLAY_FLAGS_VSYNC_LOW;
 	if (!of_property_read_u32(np, "hsync-active", &val))
-		dt->dmt_flags |= val ? VESA_DMT_HSYNC_HIGH :
-				VESA_DMT_HSYNC_LOW;
+		dt->flags |= val ? DISPLAY_FLAGS_HSYNC_HIGH :
+				DISPLAY_FLAGS_HSYNC_LOW;
 	if (!of_property_read_u32(np, "de-active", &val))
-		dt->data_flags |= val ? DISPLAY_FLAGS_DE_HIGH :
+		dt->flags |= val ? DISPLAY_FLAGS_DE_HIGH :
 				DISPLAY_FLAGS_DE_LOW;
 	if (!of_property_read_u32(np, "pixelclk-active", &val))
-		dt->data_flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
+		dt->flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
 				DISPLAY_FLAGS_PIXDATA_NEGEDGE;
 
 	if (of_property_read_bool(np, "interlaced"))
-		dt->data_flags |= DISPLAY_FLAGS_INTERLACED;
+		dt->flags |= DISPLAY_FLAGS_INTERLACED;
 	if (of_property_read_bool(np, "doublescan"))
-		dt->data_flags |= DISPLAY_FLAGS_DOUBLESCAN;
+		dt->flags |= DISPLAY_FLAGS_DOUBLESCAN;
 
 	if (ret) {
 		pr_err("%s: error reading timing properties\n",

drivers/video/videomode.c

@@ -31,8 +31,7 @@ int videomode_from_timing(const struct display_timings *disp,
 	vm->vback_porch = display_timing_get_value(&dt->vback_porch, TE_TYP);
 	vm->vsync_len = display_timing_get_value(&dt->vsync_len, TE_TYP);
 
-	vm->dmt_flags = dt->dmt_flags;
-	vm->data_flags = dt->data_flags;
+	vm->flags = dt->flags;
 
 	return 0;
 }

include/video/display_timing.h

@@ -12,19 +12,16 @@
 #include <linux/bitops.h>
 #include <linux/types.h>
 
-/* VESA display monitor timing parameters */
-#define VESA_DMT_HSYNC_LOW		BIT(0)
-#define VESA_DMT_HSYNC_HIGH		BIT(1)
-#define VESA_DMT_VSYNC_LOW		BIT(2)
-#define VESA_DMT_VSYNC_HIGH		BIT(3)
-
-/* display specific flags */
-#define DISPLAY_FLAGS_DE_LOW		BIT(0)	/* data enable flag */
-#define DISPLAY_FLAGS_DE_HIGH		BIT(1)
-#define DISPLAY_FLAGS_PIXDATA_POSEDGE	BIT(2)	/* drive data on pos. edge */
-#define DISPLAY_FLAGS_PIXDATA_NEGEDGE	BIT(3)	/* drive data on neg. edge */
-#define DISPLAY_FLAGS_INTERLACED	BIT(4)
-#define DISPLAY_FLAGS_DOUBLESCAN	BIT(5)
+#define DISPLAY_FLAGS_HSYNC_LOW		BIT(0)
+#define DISPLAY_FLAGS_HSYNC_HIGH	BIT(1)
+#define DISPLAY_FLAGS_VSYNC_LOW		BIT(2)
+#define DISPLAY_FLAGS_VSYNC_HIGH	BIT(3)
+#define DISPLAY_FLAGS_DE_LOW		BIT(4)	/* data enable flag */
+#define DISPLAY_FLAGS_DE_HIGH		BIT(5)
+#define DISPLAY_FLAGS_PIXDATA_POSEDGE	BIT(6)	/* drive data on pos. edge */
+#define DISPLAY_FLAGS_PIXDATA_NEGEDGE	BIT(7)	/* drive data on neg. edge */
+#define DISPLAY_FLAGS_INTERLACED	BIT(8)
+#define DISPLAY_FLAGS_DOUBLESCAN	BIT(9)
 
 /*
  * A single signal can be specified via a range of minimal and maximal values
@@ -72,8 +69,7 @@ struct display_timing {
 	struct timing_entry vback_porch;	/* ver. back porch */
 	struct timing_entry vsync_len;		/* ver. sync len */
 
-	unsigned int dmt_flags;			/* VESA DMT flags */
-	unsigned int data_flags;		/* video data flags */
+	unsigned int flags;			/* display flags */
 };
 
 /*

include/video/videomode.h

@@ -29,8 +29,7 @@ struct videomode {
 	u32 vback_porch;
 	u32 vsync_len;
 
-	unsigned int dmt_flags;	/* VESA DMT flags */
-	unsigned int data_flags; /* video data flags */
+	unsigned int flags; /* display flags */
 };
 
 /**