Skip to content

L
linux
Commit 06afb1a0 authored by Russell King's avatar Russell King
Browse files
Options

Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0',... 

Merge branches 'arnd-randcfg-fixes', 'debug', 'io' (early part), 'l2x0', 'p2v', 'pgt' (early part) and 'smp' into for-linus
parents c3b92c87 7816e210 f73765fc 70e5f5ef 91c2ebb9 daece596 d7c5d0dc a06f916b
Hide whitespace changes
Inline Side-by-side
Showing with 1282 additions and 721 deletions
Documentation/devicetree/bindings/arm/l2cc.txt 0 → 100644
View file @ 06afb1a0
* ARM L2 Cache Controller
ARM cores often have a separate level 2 cache controller. There are various
implementations of the L2 cache controller with compatible programming models.
The ARM L2 cache representation in the device tree should be done as follows:
Required properties:
- compatible : should be one of:
"arm,pl310-cache"
"arm,l220-cache"
"arm,l210-cache"
- cache-unified : Specifies the cache is a unified cache.
- cache-level : Should be set to 2 for a level 2 cache.
- reg : Physical base address and size of cache controller's memory mapped
registers.
Optional properties:
- arm,data-latency : Cycles of latency for Data RAM accesses. Specifies 3 cells of
read, write and setup latencies. Minimum valid values are 1. Controllers
without setup latency control should use a value of 0.
- arm,tag-latency : Cycles of latency for Tag RAM accesses. Specifies 3 cells of
read, write and setup latencies. Controllers without setup latency control
should use 0. Controllers without separate read and write Tag RAM latency
values should only use the first cell.
- arm,dirty-latency : Cycles of latency for Dirty RAMs. This is a single cell.
- arm,filter-ranges : <start length> Starting address and length of window to
filter. Addresses in the filter window are directed to the M1 port. Other
addresses will go to the M0 port.
- interrupts : 1 combined interrupt.
Example:
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xfff12000 0x1000>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <2 2 2>;
arm,filter-latency = <0x80000000 0x8000000>;
cache-unified;
cache-level = <2>;
interrupts = <45>;
};
arch/arm/Kconfig
View file @ 06afb1a0
......@@ -3,7 +3,7 @@ config ARM
default y
select HAVE_AOUT
select HAVE_DMA_API_DEBUG
select HAVE_IDE
select HAVE_IDE if PCI || ISA || PCMCIA
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
......@@ -195,7 +195,8 @@ config VECTORS_BASE
The base address of exception vectors.
config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime"
bool "Patch physical to virtual translations at runtime" if EMBEDDED
default y
depends on !XIP_KERNEL && MMU
depends on !ARCH_REALVIEW || !SPARSEMEM
help
......@@ -204,16 +205,12 @@ config ARM_PATCH_PHYS_VIRT
kernel in system memory.
This can only be used with non-XIP MMU kernels where the base
of physical memory is at a 16MB boundary, or theoretically 64K
for the MSM machine class.
of physical memory is at a 16MB boundary.
Only disable this option if you know that you do not require
this feature (eg, building a kernel for a single machine) and
you need to shrink the kernel to the minimal size.
config ARM_PATCH_PHYS_VIRT_16BIT
def_bool y
depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
help
This option extends the physical to virtual translation patching
to allow physical memory down to a theoretical minimum of 64K
boundaries.
source "init/Kconfig"
......@@ -301,7 +298,6 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
select ARM_PATCH_PHYS_VIRT if MMU
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
......@@ -385,6 +381,7 @@ config ARCH_FOOTBRIDGE
select CPU_SA110
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
select HAVE_IDE
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
......@@ -631,6 +628,8 @@ config ARCH_PXA
select SPARSE_IRQ
select AUTO_ZRELADDR
select MULTI_IRQ_HANDLER
select ARM_CPU_SUSPEND if PM
select HAVE_IDE
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
......@@ -671,6 +670,7 @@ config ARCH_RPC
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
select HAVE_IDE
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
......@@ -689,6 +689,7 @@ config ARCH_SA1100
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_IDE
help
Support for StrongARM 11x0 based boards.
......@@ -1375,6 +1376,7 @@ config SMP
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
depends on MMU
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
help
......@@ -1407,6 +1409,31 @@ config SMP_ON_UP
If you don't know what to do here, say Y.
config ARM_CPU_TOPOLOGY
bool "Support cpu topology definition"
depends on SMP && CPU_V7
default y
help
Support ARM cpu topology definition. The MPIDR register defines
affinity between processors which is then used to describe the cpu
topology of an ARM System.
config SCHED_MC
bool "Multi-core scheduler support"
depends on ARM_CPU_TOPOLOGY
help
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
config SCHED_SMT
bool "SMT scheduler support"
depends on ARM_CPU_TOPOLOGY
help
Improves the CPU scheduler's decision making when dealing with
MultiThreading at a cost of slightly increased overhead in some
places. If unsure say N here.
config HAVE_ARM_SCU
bool
help
......@@ -1482,6 +1509,7 @@ config THUMB2_KERNEL
depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
select ARM_UNWIND
help
By enabling this option, the kernel will be compiled in
Thumb-2 mode. A compiler/assembler that understand the unified
......@@ -2101,6 +2129,9 @@ config ARCH_SUSPEND_POSSIBLE
CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
def_bool y
config ARM_CPU_SUSPEND
def_bool PM_SLEEP
endmenu
source "net/Kconfig"
......
arch/arm/Kconfig.debug
View file @ 06afb1a0
......@@ -65,13 +65,71 @@ config DEBUG_USER
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
bool "Kernel low-level debugging functions"
bool "Kernel low-level debugging functions (read help!)"
depends on DEBUG_KERNEL
help
Say Y here to include definitions of printascii, printch, printhex
in the kernel. This is helpful if you are debugging code that
executes before the console is initialized.
Note that selecting this option will limit the kernel to a single
UART definition, as specified below. Attempting to boot the kernel
image on a different platform *will not work*, so this option should
not be enabled for kernels that are intended to be portable.
choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on these devices.
config DEBUG_CLPS711X_UART2
bool "Kernel low-level debugging messages via UART2"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
endchoice
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
......@@ -80,43 +138,14 @@ config EARLY_PRINTK
kernel low-level debugging functions. Add earlyprintk to your
kernel parameters to enable this console.
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
depends on DEBUG_LL
help
Say Y here if you want the debug print routines to direct their
output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
It does include a timeout to ensure that the system does not
totally freeze when there is nothing connected to read.
config OC_ETM
bool "On-chip ETM and ETB"
select ARM_AMBA
depends on ARM_AMBA
help
Enables the on-chip embedded trace macrocell and embedded trace
buffer driver that will allow you to collect traces of the
kernel code.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on DEBUG_LL && FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct their
output to the serial port in the DC21285 (Footbridge). Saying N
will cause the debug messages to appear on the first 16550
serial port.
config DEBUG_CLPS711X_UART2
bool "Kernel low-level debugging messages via UART2"
depends on DEBUG_LL && ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct their
output to the second serial port on these devices. Saying N will
cause the debug messages to appear on the first serial port.
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int "S3C UART to use for low-level debug"
......
arch/arm/Makefile
View file @ 06afb1a0
......@@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
......
arch/arm/common/gic.c
View file @ 06afb1a0
......@@ -180,7 +180,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
return -EINVAL;
mask = 0xff << shift;
bit = 1 << (cpu + shift);
bit = 1 << (cpu_logical_map(cpu) + shift);
spin_lock(&irq_controller_lock);
val = readl_relaxed(reg) & ~mask;
......@@ -259,9 +259,15 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
unsigned int irq_start)
{
unsigned int gic_irqs, irq_limit, i;
u32 cpumask;
void __iomem *base = gic->dist_base;
u32 cpumask = 1 << smp_processor_id();
u32 cpu = 0;
#ifdef CONFIG_SMP
cpu = cpu_logical_map(smp_processor_id());
#endif
cpumask = 1 << cpu;
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
......@@ -382,7 +388,12 @@ void __cpuinit gic_enable_ppi(unsigned int irq)
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
unsigned long map = *cpus_addr(*mask);
int cpu;
unsigned long map = 0;
/* Convert our logical CPU mask into a physical one. */
for_each_cpu(cpu, mask)
map |= 1 << cpu_logical_map(cpu);
/*
* Ensure that stores to Normal memory are visible to the
......
arch/arm/common/vic.c
View file @ 06afb1a0
......@@ -346,7 +346,8 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
/* Identify which VIC cell this one is, by reading the ID */
for (i = 0; i < 4; i++) {
u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
void __iomem *addr;
addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
cellid |= (readl(addr) & 0xff) << (8 * i);
}
vendor = (cellid >> 12) & 0xff;
......
arch/arm/include/asm/cputype.h
View file @ 06afb1a0
......@@ -8,6 +8,7 @@
#define CPUID_CACHETYPE 1
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
#define CPUID_MPIDR 5
#define CPUID_EXT_PFR0 "c1, 0"
#define CPUID_EXT_PFR1 "c1, 1"
......@@ -70,6 +71,11 @@ static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
return read_cpuid(CPUID_TCM);
}
static inline unsigned int __attribute_const__ read_cpuid_mpidr(void)
{
return read_cpuid(CPUID_MPIDR);
}
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
......
arch/arm/include/asm/dma-mapping.h
View file @ 06afb1a0
......@@ -32,7 +32,7 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
{
return (void *)__bus_to_virt(addr);
return (void *)__bus_to_virt((unsigned long)addr);
}
static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
......
arch/arm/include/asm/ecard.h
View file @ 06afb1a0
......@@ -161,7 +161,6 @@ struct expansion_card {
/* Private internal data */
const char *card_desc; /* Card description */
CONST unsigned int podaddr; /* Base Linux address for card */
CONST loader_t loader; /* loader program */
u64 dma_mask;
};
......
arch/arm/include/asm/exception.h 0 → 100644
View file @ 06afb1a0
/*
* Annotations for marking C functions as exception handlers.
*
* These should only be used for C functions that are called from the low
* level exception entry code and not any intervening C code.
*/
#ifndef __ASM_ARM_EXCEPTION_H
#define __ASM_ARM_EXCEPTION_H
#include <linux/ftrace.h>
#define __exception __attribute__((section(".exception.text")))
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#define __exception_irq_entry __irq_entry
#else
#define __exception_irq_entry __exception
#endif
#endif /* __ASM_ARM_EXCEPTION_H */
arch/arm/include/asm/hardware/cache-l2x0.h
View file @ 06afb1a0
......@@ -52,6 +52,8 @@
#define L2X0_LOCKDOWN_WAY_D_BASE 0x900
#define L2X0_LOCKDOWN_WAY_I_BASE 0x904
#define L2X0_LOCKDOWN_STRIDE 0x08
#define L2X0_ADDR_FILTER_START 0xC00
#define L2X0_ADDR_FILTER_END 0xC04
#define L2X0_TEST_OPERATION 0xF00
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
......@@ -65,8 +67,23 @@
#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
#define L2X0_CACHE_ID_PART_L210 (1 << 6)
#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_CACHE_ID_RTL_MASK 0x3f
#define L2X0_CACHE_ID_RTL_R0P0 0x0
#define L2X0_CACHE_ID_RTL_R1P0 0x2
#define L2X0_CACHE_ID_RTL_R2P0 0x4
#define L2X0_CACHE_ID_RTL_R3P0 0x5
#define L2X0_CACHE_ID_RTL_R3P1 0x6
#define L2X0_CACHE_ID_RTL_R3P2 0x8
#define L2X0_AUX_CTRL_MASK 0xc0000fff
#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0
#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7
#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3
#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3)
#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6
#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6)
#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9
#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9)
#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16
#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17
#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17)
......@@ -77,8 +94,33 @@
#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29
#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30
#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0
#define L2X0_LATENCY_CTRL_RD_SHIFT 4
#define L2X0_LATENCY_CTRL_WR_SHIFT 8
#define L2X0_ADDR_FILTER_EN 1
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
struct l2x0_regs {
unsigned long phy_base;
unsigned long aux_ctrl;
/*
* Whether the following registers need to be saved/restored
* depends on platform
*/
unsigned long tag_latency;
unsigned long data_latency;
unsigned long filter_start;
unsigned long filter_end;
unsigned long prefetch_ctrl;
unsigned long pwr_ctrl;
};
extern struct l2x0_regs l2x0_saved_regs;
#endif
#endif
arch/arm/include/asm/io.h
View file @ 06afb1a0
......@@ -109,6 +109,27 @@ static inline void __iomem *__typesafe_io(unsigned long addr)
*/
#include <mach/io.h>
/*
* This is the limit of PC card/PCI/ISA IO space, which is by default
* 64K if we have PC card, PCI or ISA support. Otherwise, default to
* zero to prevent ISA/PCI drivers claiming IO space (and potentially
* oopsing.)
*
* Only set this larger if you really need inb() et.al. to operate over
* a larger address space. Note that SOC_COMMON ioremaps each sockets
* IO space area, and so inb() et.al. must be defined to operate as per
* readb() et.al. on such platforms.
*/
#ifndef IO_SPACE_LIMIT
#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE)
#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff)
#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD)
#define IO_SPACE_LIMIT ((resource_size_t)0xffff)
#else
#define IO_SPACE_LIMIT ((resource_size_t)0)
#endif
#endif
/*
* IO port access primitives
* -------------------------
......@@ -260,10 +281,16 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
#define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
#define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
#define ioread16be(p) ({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
#define ioread32be(p) ({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
#define iowrite8(v,p) ({ __iowmb(); (void)__raw_writeb(v, p); })
#define iowrite16(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
#define iowrite32(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
#define iowrite16be(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_be16(v), p); })
#define iowrite32be(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_be32(v), p); })
#define ioread8_rep(p,d,c) __raw_readsb(p,d,c)
#define ioread16_rep(p,d,c) __raw_readsw(p,d,c)
#define ioread32_rep(p,d,c) __raw_readsl(p,d,c)
......
arch/arm/include/asm/localtimer.h
View file @ 06afb1a0
......@@ -24,6 +24,10 @@ void percpu_timer_setup(void);
*/
asmlinkage void do_local_timer(struct pt_regs *);
/*
* Called from C code
*/
void handle_local_timer(struct pt_regs *);
#ifdef CONFIG_LOCAL_TIMERS
......
arch/arm/include/asm/memory.h
View file @ 06afb1a0
......@@ -160,7 +160,6 @@
* so that all we need to do is modify the 8-bit constant field.
*/
#define __PV_BITS_31_24 0x81000000
#define __PV_BITS_23_16 0x00810000
extern unsigned long __pv_phys_offset;
#define PHYS_OFFSET __pv_phys_offset
......@@ -178,9 +177,6 @@ static inline unsigned long __virt_to_phys(unsigned long x)
{
unsigned long t;
__pv_stub(x, t, "add", __PV_BITS_31_24);
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
__pv_stub(t, t, "add", __PV_BITS_23_16);
#endif
return t;
}
......@@ -188,9 +184,6 @@ static inline unsigned long __phys_to_virt(unsigned long x)
{
unsigned long t;
__pv_stub(x, t, "sub", __PV_BITS_31_24);
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
__pv_stub(t, t, "sub", __PV_BITS_23_16);
#endif
return t;
}
#else
......
arch/arm/include/asm/module.h
View file @ 06afb1a0
......@@ -31,11 +31,7 @@ struct mod_arch_specific {
/* Add __virt_to_phys patching state as well */
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
#else
#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
#endif
#else
#define MODULE_ARCH_VERMAGIC_P2V ""
#endif
......
arch/arm/include/asm/outercache.h
View file @ 06afb1a0
......@@ -34,6 +34,7 @@ struct outer_cache_fns {
void (*sync)(void);
#endif
void (*set_debug)(unsigned long);
void (*resume)(void);
};
#ifdef CONFIG_OUTER_CACHE
......@@ -74,6 +75,12 @@ static inline void outer_disable(void)
outer_cache.disable();
}
static inline void outer_resume(void)
{
if (outer_cache.resume)
outer_cache.resume();
}
#else
static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
......
arch/arm/include/asm/page.h
View file @ 06afb1a0
......@@ -151,47 +151,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
extern void copy_page(void *to, const void *from);
typedef unsigned long pteval_t;
#undef STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
/*
* These are used to make use of C type-checking..
*/
typedef struct { pteval_t pte; } pte_t;
typedef struct { unsigned long pmd; } pmd_t;
typedef struct { unsigned long pgd[2]; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
#define pte_val(x) ((x).pte)
#define pmd_val(x) ((x).pmd)
#define pgd_val(x) ((x).pgd[0])
#define pgprot_val(x) ((x).pgprot)
#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
#else
/*
* .. while these make it easier on the compiler
*/
typedef pteval_t pte_t;
typedef unsigned long pmd_t;
typedef unsigned long pgd_t[2];
typedef unsigned long pgprot_t;
#define pte_val(x) (x)
#define pmd_val(x) (x)
#define pgd_val(x) ((x)[0])
#define pgprot_val(x) (x)
#define __pte(x) (x)
#define __pmd(x) (x)
#define __pgprot(x) (x)
#endif /* STRICT_MM_TYPECHECKS */
#include <asm/pgtable-2level-types.h>
#endif /* CONFIG_MMU */
......
arch/arm/include/asm/pgalloc.h
View file @ 06afb1a0
......@@ -105,9 +105,9 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
}
static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
unsigned long prot)
pmdval_t prot)
{
unsigned long pmdval = (pte + PTE_HWTABLE_OFF) | prot;
pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot;
pmdp[0] = __pmd(pmdval);
pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
flush_pmd_entry(pmdp);
......
arch/arm/include/asm/pgtable-2level-hwdef.h 0 → 100644
View file @ 06afb1a0
/*
* arch/arm/include/asm/pgtable-2level-hwdef.h
*
* Copyright (C) 1995-2002 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_PGTABLE_2LEVEL_HWDEF_H
#define _ASM_PGTABLE_2LEVEL_HWDEF_H
/*
* Hardware page table definitions.
*
* + Level 1 descriptor (PMD)
* - common
*/
#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0)
#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0)
#define PMD_TYPE_TABLE (_AT(pmdval_t, 1) << 0)
#define PMD_TYPE_SECT (_AT(pmdval_t, 2) << 0)
#define PMD_BIT4 (_AT(pmdval_t, 1) << 4)
#define PMD_DOMAIN(x) (_AT(pmdval_t, (x)) << 5)
#define PMD_PROTECTION (_AT(pmdval_t, 1) << 9) /* v5 */
/*
* - section
*/
#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2)
#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3)
#define PMD_SECT_XN (_AT(pmdval_t, 1) << 4) /* v6 */
#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 1) << 10)
#define PMD_SECT_AP_READ (_AT(pmdval_t, 1) << 11)
#define PMD_SECT_TEX(x) (_AT(pmdval_t, (x)) << 12) /* v5 */
#define PMD_SECT_APX (_AT(pmdval_t, 1) << 15) /* v6 */
#define PMD_SECT_S (_AT(pmdval_t, 1) << 16) /* v6 */
#define PMD_SECT_nG (_AT(pmdval_t, 1) << 17) /* v6 */
#define PMD_SECT_SUPER (_AT(pmdval_t, 1) << 18) /* v6 */
#define PMD_SECT_AF (_AT(pmdval_t, 0))
#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0))
#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE)
#define PMD_SECT_WT (PMD_SECT_CACHEABLE)
#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2))
/*
* - coarse table (not used)
*/
/*
* + Level 2 descriptor (PTE)
* - common
*/
#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0)
#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0)
#define PTE_TYPE_LARGE (_AT(pteval_t, 1) << 0)
#define PTE_TYPE_SMALL (_AT(pteval_t, 2) << 0)
#define PTE_TYPE_EXT (_AT(pteval_t, 3) << 0) /* v5 */
#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2)
#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3)
/*
* - extended small page/tiny page
*/
#define PTE_EXT_XN (_AT(pteval_t, 1) << 0) /* v6 */
#define PTE_EXT_AP_MASK (_AT(pteval_t, 3) << 4)
#define PTE_EXT_AP0 (_AT(pteval_t, 1) << 4)
#define PTE_EXT_AP1 (_AT(pteval_t, 2) << 4)
#define PTE_EXT_AP_UNO_SRO (_AT(pteval_t, 0) << 4)
#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0)
#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1)
#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0)
#define PTE_EXT_TEX(x) (_AT(pteval_t, (x)) << 6) /* v5 */
#define PTE_EXT_APX (_AT(pteval_t, 1) << 9) /* v6 */
#define PTE_EXT_COHERENT (_AT(pteval_t, 1) << 9) /* XScale3 */
#define PTE_EXT_SHARED (_AT(pteval_t, 1) << 10) /* v6 */
#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* v6 */
/*
* - small page
*/
#define PTE_SMALL_AP_MASK (_AT(pteval_t, 0xff) << 4)
#define PTE_SMALL_AP_UNO_SRO (_AT(pteval_t, 0x00) << 4)
#define PTE_SMALL_AP_UNO_SRW (_AT(pteval_t, 0x55) << 4)
#define PTE_SMALL_AP_URO_SRW (_AT(pteval_t, 0xaa) << 4)
#define PTE_SMALL_AP_URW_SRW (_AT(pteval_t, 0xff) << 4)
#define PHYS_MASK (~0UL)
#endif
arch/arm/include/asm/pgtable-2level-types.h 0 → 100644
View file @ 06afb1a0
/*
* arch/arm/include/asm/pgtable-2level-types.h
*
* Copyright (C) 1995-2003 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_PGTABLE_2LEVEL_TYPES_H
#define _ASM_PGTABLE_2LEVEL_TYPES_H
#include <asm/types.h>
typedef u32 pteval_t;
typedef u32 pmdval_t;
#undef STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
/*
* These are used to make use of C type-checking..
*/
typedef struct { pteval_t pte; } pte_t;
typedef struct { pmdval_t pmd; } pmd_t;
typedef struct { pmdval_t pgd[2]; } pgd_t;
typedef struct { pteval_t pgprot; } pgprot_t;
#define pte_val(x) ((x).pte)
#define pmd_val(x) ((x).pmd)
#define pgd_val(x) ((x).pgd[0])
#define pgprot_val(x) ((x).pgprot)
#define __pte(x) ((pte_t) { (x) } )
#define __pmd(x) ((pmd_t) { (x) } )
#define __pgprot(x) ((pgprot_t) { (x) } )
#else
/*
* .. while these make it easier on the compiler
*/
typedef pteval_t pte_t;
typedef pmdval_t pmd_t;
typedef pmdval_t pgd_t[2];
typedef pteval_t pgprot_t;
#define pte_val(x) (x)
#define pmd_val(x) (x)
#define pgd_val(x) ((x)[0])
#define pgprot_val(x) (x)
#define __pte(x) (x)
#define __pmd(x) (x)
#define __pgprot(x) (x)
#endif /* STRICT_MM_TYPECHECKS */
#endif /* _ASM_PGTABLE_2LEVEL_TYPES_H */
arch/arm/include/asm/pgtable-2level.h 0 → 100644
View file @ 06afb1a0
/*
* arch/arm/include/asm/pgtable-2level.h
*
* Copyright (C) 1995-2002 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_PGTABLE_2LEVEL_H
#define _ASM_PGTABLE_2LEVEL_H
/*
* Hardware-wise, we have a two level page table structure, where the first
* level has 4096 entries, and the second level has 256 entries. Each entry
* is one 32-bit word. Most of the bits in the second level entry are used
* by hardware, and there aren't any "accessed" and "dirty" bits.
*
* Linux on the other hand has a three level page table structure, which can
* be wrapped to fit a two level page table structure easily - using the PGD
* and PTE only. However, Linux also expects one "PTE" table per page, and
* at least a "dirty" bit.
*
* Therefore, we tweak the implementation slightly - we tell Linux that we
* have 2048 entries in the first level, each of which is 8 bytes (iow, two
* hardware pointers to the second level.) The second level contains two
* hardware PTE tables arranged contiguously, preceded by Linux versions
* which contain the state information Linux needs. We, therefore, end up
* with 512 entries in the "PTE" level.
*
* This leads to the page tables having the following layout:
*
* pgd pte
* | |
* +--------+
* | | +------------+ +0
* +- - - - + | Linux pt 0 |
* | | +------------+ +1024
* +--------+ +0 | Linux pt 1 |
* | |-----> +------------+ +2048
* +- - - - + +4 | h/w pt 0 |
* | |-----> +------------+ +3072
* +--------+ +8 | h/w pt 1 |
* | | +------------+ +4096
*
* See L_PTE_xxx below for definitions of bits in the "Linux pt", and
* PTE_xxx for definitions of bits appearing in the "h/w pt".
*
* PMD_xxx definitions refer to bits in the first level page table.
*
* The "dirty" bit is emulated by only granting hardware write permission
* iff the page is marked "writable" and "dirty" in the Linux PTE. This
* means that a write to a clean page will cause a permission fault, and
* the Linux MM layer will mark the page dirty via handle_pte_fault().
* For the hardware to notice the permission change, the TLB entry must
* be flushed, and ptep_set_access_flags() does that for us.
*
* The "accessed" or "young" bit is emulated by a similar method; we only
* allow accesses to the page if the "young" bit is set. Accesses to the
* page will cause a fault, and handle_pte_fault() will set the young bit
* for us as long as the page is marked present in the corresponding Linux
* PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is
* up to date.
*
* However, when the "young" bit is cleared, we deny access to the page
* by clearing the hardware PTE. Currently Linux does not flush the TLB
* for us in this case, which means the TLB will retain the transation
* until either the TLB entry is evicted under pressure, or a context
* switch which changes the user space mapping occurs.
*/
#define PTRS_PER_PTE 512
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 2048
#define PTE_HWTABLE_PTRS (PTRS_PER_PTE)
#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t))
#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32))
/*
* PMD_SHIFT determines the size of the area a second-level page table can map
* PGDIR_SHIFT determines what a third-level page table entry can map
*/
#define PMD_SHIFT 21
#define PGDIR_SHIFT 21
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* section address mask and size definitions.
*/
#define SECTION_SHIFT 20
#define SECTION_SIZE (1UL << SECTION_SHIFT)
#define SECTION_MASK (~(SECTION_SIZE-1))
/*
* ARMv6 supersection address mask and size definitions.
*/
#define SUPERSECTION_SHIFT 24
#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT)
#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1))
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
/*
* "Linux" PTE definitions.
*
* We keep two sets of PTEs - the hardware and the linux version.
* This allows greater flexibility in the way we map the Linux bits
* onto the hardware tables, and allows us to have YOUNG and DIRTY
* bits.
*
* The PTE table pointer refers to the hardware entries; the "Linux"
* entries are stored 1024 bytes below.
*/
#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0)
#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1)
#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */
#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6)
#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7)
#define L_PTE_USER (_AT(pteval_t, 1) << 8)
#define L_PTE_XN (_AT(pteval_t, 1) << 9)
#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */
/*
* These are the memory types, defined to be compatible with
* pre-ARMv6 CPUs cacheable and bufferable bits: XXCB
*/
#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */
#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */
#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */
#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */
#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */
#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */
#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */
#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */
#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */
#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */
#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2)
#endif /* _ASM_PGTABLE_2LEVEL_H */
arch/arm/include/asm/pgtable-hwdef.h
View file @ 06afb1a0
......@@ -10,81 +10,6 @@
#ifndef _ASMARM_PGTABLE_HWDEF_H
#define _ASMARM_PGTABLE_HWDEF_H
/*
* Hardware page table definitions.
*
* + Level 1 descriptor (PMD)
* - common
*/
#define PMD_TYPE_MASK (3 << 0)
#define PMD_TYPE_FAULT (0 << 0)
#define PMD_TYPE_TABLE (1 << 0)
#define PMD_TYPE_SECT (2 << 0)
#define PMD_BIT4 (1 << 4)
#define PMD_DOMAIN(x) ((x) << 5)
#define PMD_PROTECTION (1 << 9) /* v5 */
/*
* - section
*/
#define PMD_SECT_BUFFERABLE (1 << 2)
#define PMD_SECT_CACHEABLE (1 << 3)
#define PMD_SECT_XN (1 << 4) /* v6 */
#define PMD_SECT_AP_WRITE (1 << 10)
#define PMD_SECT_AP_READ (1 << 11)
#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */
#define PMD_SECT_APX (1 << 15) /* v6 */
#define PMD_SECT_S (1 << 16) /* v6 */
#define PMD_SECT_nG (1 << 17) /* v6 */
#define PMD_SECT_SUPER (1 << 18) /* v6 */
#define PMD_SECT_UNCACHED (0)
#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE)
#define PMD_SECT_WT (PMD_SECT_CACHEABLE)
#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2))
/*
* - coarse table (not used)
*/
/*
* + Level 2 descriptor (PTE)
* - common
*/
#define PTE_TYPE_MASK (3 << 0)
#define PTE_TYPE_FAULT (0 << 0)
#define PTE_TYPE_LARGE (1 << 0)
#define PTE_TYPE_SMALL (2 << 0)
#define PTE_TYPE_EXT (3 << 0) /* v5 */
#define PTE_BUFFERABLE (1 << 2)
#define PTE_CACHEABLE (1 << 3)
/*
* - extended small page/tiny page
*/
#define PTE_EXT_XN (1 << 0) /* v6 */
#define PTE_EXT_AP_MASK (3 << 4)
#define PTE_EXT_AP0 (1 << 4)
#define PTE_EXT_AP1 (2 << 4)
#define PTE_EXT_AP_UNO_SRO (0 << 4)
#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0)
#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1)
#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0)
#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */
#define PTE_EXT_APX (1 << 9) /* v6 */
#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */
#define PTE_EXT_SHARED (1 << 10) /* v6 */
#define PTE_EXT_NG (1 << 11) /* v6 */
/*
* - small page
*/
#define PTE_SMALL_AP_MASK (0xff << 4)
#define PTE_SMALL_AP_UNO_SRO (0x00 << 4)
#define PTE_SMALL_AP_UNO_SRW (0x55 << 4)
#define PTE_SMALL_AP_URO_SRW (0xaa << 4)
#define PTE_SMALL_AP_URW_SRW (0xff << 4)
#include <asm/pgtable-2level-hwdef.h>
#endif
arch/arm/include/asm/pgtable.h
View file @ 06afb1a0
......@@ -24,6 +24,8 @@
#include <mach/vmalloc.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable-2level.h>
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
* current 8MB value just means that there will be a 8MB "hole" after the
......@@ -41,79 +43,6 @@
#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
#endif
/*
* Hardware-wise, we have a two level page table structure, where the first
* level has 4096 entries, and the second level has 256 entries. Each entry
* is one 32-bit word. Most of the bits in the second level entry are used
* by hardware, and there aren't any "accessed" and "dirty" bits.
*
* Linux on the other hand has a three level page table structure, which can
* be wrapped to fit a two level page table structure easily - using the PGD
* and PTE only. However, Linux also expects one "PTE" table per page, and
* at least a "dirty" bit.
*
* Therefore, we tweak the implementation slightly - we tell Linux that we
* have 2048 entries in the first level, each of which is 8 bytes (iow, two
* hardware pointers to the second level.) The second level contains two
* hardware PTE tables arranged contiguously, preceded by Linux versions
* which contain the state information Linux needs. We, therefore, end up
* with 512 entries in the "PTE" level.
*
* This leads to the page tables having the following layout:
*
* pgd pte
* | |
* +--------+
* | | +------------+ +0
* +- - - - + | Linux pt 0 |
* | | +------------+ +1024
* +--------+ +0 | Linux pt 1 |
* | |-----> +------------+ +2048
* +- - - - + +4 | h/w pt 0 |
* | |-----> +------------+ +3072
* +--------+ +8 | h/w pt 1 |
* | | +------------+ +4096
*
* See L_PTE_xxx below for definitions of bits in the "Linux pt", and
* PTE_xxx for definitions of bits appearing in the "h/w pt".
*
* PMD_xxx definitions refer to bits in the first level page table.
*
* The "dirty" bit is emulated by only granting hardware write permission
* iff the page is marked "writable" and "dirty" in the Linux PTE. This
* means that a write to a clean page will cause a permission fault, and
* the Linux MM layer will mark the page dirty via handle_pte_fault().
* For the hardware to notice the permission change, the TLB entry must
* be flushed, and ptep_set_access_flags() does that for us.
*
* The "accessed" or "young" bit is emulated by a similar method; we only
* allow accesses to the page if the "young" bit is set. Accesses to the
* page will cause a fault, and handle_pte_fault() will set the young bit
* for us as long as the page is marked present in the corresponding Linux
* PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is
* up to date.
*
* However, when the "young" bit is cleared, we deny access to the page
* by clearing the hardware PTE. Currently Linux does not flush the TLB
* for us in this case, which means the TLB will retain the transation
* until either the TLB entry is evicted under pressure, or a context
* switch which changes the user space mapping occurs.
*/
#define PTRS_PER_PTE 512
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD 2048
#define PTE_HWTABLE_PTRS (PTRS_PER_PTE)
#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t))
#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32))
/*
* PMD_SHIFT determines the size of the area a second-level page table can map
* PGDIR_SHIFT determines what a third-level page table entry can map
*/
#define PMD_SHIFT 21
#define PGDIR_SHIFT 21
#define LIBRARY_TEXT_START 0x0c000000
#ifndef __ASSEMBLY__
......@@ -124,12 +53,6 @@ extern void __pgd_error(const char *file, int line, pgd_t);
#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte)
#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd)
#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd)
#endif /* !__ASSEMBLY__ */
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* This is the lowest virtual address we can permit any user space
......@@ -138,60 +61,6 @@ extern void __pgd_error(const char *file, int line, pgd_t);
*/
#define FIRST_USER_ADDRESS PAGE_SIZE
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
/*
* section address mask and size definitions.
*/
#define SECTION_SHIFT 20
#define SECTION_SIZE (1UL << SECTION_SHIFT)
#define SECTION_MASK (~(SECTION_SIZE-1))
/*
* ARMv6 supersection address mask and size definitions.
*/
#define SUPERSECTION_SHIFT 24
#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT)
#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1))
/*
* "Linux" PTE definitions.
*
* We keep two sets of PTEs - the hardware and the linux version.
* This allows greater flexibility in the way we map the Linux bits
* onto the hardware tables, and allows us to have YOUNG and DIRTY
* bits.
*
* The PTE table pointer refers to the hardware entries; the "Linux"
* entries are stored 1024 bytes below.
*/
#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0)
#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1)
#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */
#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6)
#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7)
#define L_PTE_USER (_AT(pteval_t, 1) << 8)
#define L_PTE_XN (_AT(pteval_t, 1) << 9)
#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */
/*
* These are the memory types, defined to be compatible with
* pre-ARMv6 CPUs cacheable and bufferable bits: XXCB
*/
#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */
#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */
#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */
#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */
#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */
#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */
#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */
#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */
#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */
#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */
#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2)
#ifndef __ASSEMBLY__
/*
* The pgprot_* and protection_map entries will be fixed up in runtime
* to include the cachable and bufferable bits based on memory policy,
......@@ -327,10 +196,10 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
static inline pte_t *pmd_page_vaddr(pmd_t pmd)
{
return __va(pmd_val(pmd) & PAGE_MASK);
return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK);
}
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
/* we don't need complex calculations here as the pmd is folded into the pgd */
#define pmd_addr_end(addr,end) (end)
......@@ -351,7 +220,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr))
#define pte_unmap(pte) __pte_unmap(pte)
#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT)
#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot))
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
......
arch/arm/include/asm/smp.h
View file @ 06afb1a0
......@@ -32,6 +32,11 @@ extern void show_ipi_list(struct seq_file *, int);
*/
asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
/*
* Called from C code, this handles an IPI.
*/
void handle_IPI(int ipinr, struct pt_regs *regs);
/*
* Setup the set of possible CPUs (via set_cpu_possible)
*/
......@@ -65,6 +70,12 @@ extern void platform_secondary_init(unsigned int cpu);
*/
extern void platform_smp_prepare_cpus(unsigned int);
/*
* Logical CPU mapping.
*/
extern int __cpu_logical_map[NR_CPUS];
#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
/*
* Initial data for bringing up a secondary CPU.
*/
......
arch/arm/include/asm/system.h
View file @ 06afb1a0
......@@ -62,13 +62,6 @@
#include <asm/outercache.h>
#define __exception __attribute__((section(".exception.text")))
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
#define __exception_irq_entry __irq_entry
#else
#define __exception_irq_entry __exception
#endif
struct thread_info;
struct task_struct;
......
arch/arm/include/asm/tlbflush.h
View file @ 06afb1a0
......@@ -471,7 +471,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
* these operations. This is typically used when we are removing
* PMD entries.
*/
static inline void flush_pmd_entry(pmd_t *pmd)
static inline void flush_pmd_entry(void *pmd)
{
const unsigned int __tlb_flag = __cpu_tlb_flags;
......@@ -487,7 +487,7 @@ static inline void flush_pmd_entry(pmd_t *pmd)
dsb();
}
static inline void clean_pmd_entry(pmd_t *pmd)
static inline void clean_pmd_entry(void *pmd)
{
const unsigned int __tlb_flag = __cpu_tlb_flags;
......
arch/arm/include/asm/topology.h
View file @ 06afb1a0
#ifndef _ASM_ARM_TOPOLOGY_H
#define _ASM_ARM_TOPOLOGY_H
#ifdef CONFIG_ARM_CPU_TOPOLOGY
#include <linux/cpumask.h>
struct cputopo_arm {
int thread_id;
int core_id;
int socket_id;
cpumask_t thread_sibling;
cpumask_t core_sibling;
};
extern struct cputopo_arm cpu_topology[NR_CPUS];
#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id)
#define topology_core_id(cpu) (cpu_topology[cpu].core_id)
#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling)
#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling)
#define mc_capable() (cpu_topology[0].socket_id != -1)
#define smt_capable() (cpu_topology[0].thread_id != -1)
void init_cpu_topology(void);
void store_cpu_topology(unsigned int cpuid);
const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
#else
static inline void init_cpu_topology(void) { }
static inline void store_cpu_topology(unsigned int cpuid) { }
#endif
#include <asm-generic/topology.h>
#endif /* _ASM_ARM_TOPOLOGY_H */
arch/arm/kernel/Makefile
View file @ 06afb1a0
......@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_PM_SLEEP) += sleep.o
obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
......@@ -66,6 +66,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
ifneq ($(CONFIG_ARCH_EBSA110),y)
obj-y += io.o
......
arch/arm/kernel/asm-offsets.c
View file @ 06afb1a0
......@@ -20,6 +20,7 @@
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/procinfo.h>
#include <asm/hardware/cache-l2x0.h>
#include <linux/kbuild.h>
/*
......@@ -92,6 +93,17 @@ int main(void)
DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0));
DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs));
BLANK();
#ifdef CONFIG_CACHE_L2X0
DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base));
DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl));
DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency));
DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency));
DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start));
DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end));
DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl));
DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl));
BLANK();
#endif
#ifdef CONFIG_CPU_HAS_ASID
DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id));
BLANK();
......
arch/arm/kernel/bios32.c
View file @ 06afb1a0
......@@ -412,6 +412,9 @@ void pcibios_fixup_bus(struct pci_bus *bus)
printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
}
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_fixup_bus);
#endif
/*
* Convert from Linux-centric to bus-centric addresses for bridge devices.
......@@ -431,6 +434,7 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
region->start = res->start - offset;
region->end = res->end - offset;
}
EXPORT_SYMBOL(pcibios_resource_to_bus);
void __devinit
pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
......@@ -447,12 +451,7 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
res->start = region->start + offset;
res->end = region->end + offset;
}
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_fixup_bus);
EXPORT_SYMBOL(pcibios_resource_to_bus);
EXPORT_SYMBOL(pcibios_bus_to_resource);
#endif
/*
* Swizzle the device pin each time we cross a bridge.
......
arch/arm/kernel/ecard.c
View file @ 06afb1a0
......@@ -237,7 +237,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
src_pgd = pgd_offset(mm, EASI_BASE);
src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE);
dst_pgd = pgd_offset(mm, EASI_START);
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
......@@ -674,44 +674,37 @@ static int __init ecard_probeirqhw(void)
#define ecard_probeirqhw() (0)
#endif
#ifndef IO_EC_MEMC8_BASE
#define IO_EC_MEMC8_BASE 0
#endif
static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
{
unsigned long address = 0;
void __iomem *address = NULL;
int slot = ec->slot_no;
if (ec->slot_no == 8)
return IO_EC_MEMC8_BASE;
return ECARD_MEMC8_BASE;
ectcr &= ~(1 << slot);
switch (type) {
case ECARD_MEMC:
if (slot < 4)
address = IO_EC_MEMC_BASE + (slot << 12);
address = ECARD_MEMC_BASE + (slot << 14);
break;
case ECARD_IOC:
if (slot < 4)
address = IO_EC_IOC_BASE + (slot << 12);
#ifdef IO_EC_IOC4_BASE
address = ECARD_IOC_BASE + (slot << 14);
else
address = IO_EC_IOC4_BASE + ((slot - 4) << 12);
#endif
address = ECARD_IOC4_BASE + ((slot - 4) << 14);
if (address)
address += speed << 17;
address += speed << 19;
break;
#ifdef IO_EC_EASI_BASE
case ECARD_EASI:
address = IO_EC_EASI_BASE + (slot << 22);
address = ECARD_EASI_BASE + (slot << 24);
if (speed == ECARD_FAST)
ectcr |= 1 << slot;
break;
#endif
default:
break;
}
......@@ -990,6 +983,7 @@ ecard_probe(int slot, card_type_t type)
ecard_t **ecp;
ecard_t *ec;
struct ex_ecid cid;
void __iomem *addr;
int i, rc;
ec = ecard_alloc_card(type, slot);
......@@ -999,7 +993,7 @@ ecard_probe(int slot, card_type_t type)
}
rc = -ENODEV;
if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0)
if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL)
goto nodev;
cid.r_zero = 1;
......@@ -1019,7 +1013,7 @@ ecard_probe(int slot, card_type_t type)
ec->cid.fiqmask = cid.r_fiqmask;
ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff);
ec->fiqaddr =
ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr);
ec->irqaddr = addr;
if (ec->cid.is) {
ec->irqmask = ec->cid.irqmask;
......@@ -1048,10 +1042,8 @@ ecard_probe(int slot, card_type_t type)
set_irq_flags(ec->irq, IRQF_VALID);
}
#ifdef IO_EC_MEMC8_BASE
if (slot == 8)
ec->irq = 11;
#endif
#ifdef CONFIG_ARCH_RPC
/* On RiscPC, only first two slots have DMA capability */
if (slot < 2)
......@@ -1097,9 +1089,7 @@ static int __init ecard_init(void)
ecard_probe(slot, ECARD_IOC);
}
#ifdef IO_EC_MEMC8_BASE
ecard_probe(8, ECARD_IOC);
#endif
irqhw = ecard_probeirqhw();
......
arch/arm/kernel/head.S
View file @ 06afb1a0
......@@ -21,6 +21,7 @@
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#ifdef CONFIG_DEBUG_LL
#include <mach/debug-macro.S>
......@@ -38,11 +39,14 @@
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
#define PG_DIR_SIZE 0x4000
#define PMD_ORDER 2
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
.equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE
.macro pgtbl, rd, phys
add \rd, \phys, #TEXT_OFFSET - 0x4000
add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE
.endm
#ifdef CONFIG_XIP_KERNEL
......@@ -148,11 +152,11 @@ __create_page_tables:
pgtbl r4, r8 @ page table address
/*
* Clear the 16K level 1 swapper page table
* Clear the swapper page table
*/
mov r0, r4
mov r3, #0
add r6, r0, #0x4000
add r6, r0, #PG_DIR_SIZE
1: str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
......@@ -171,30 +175,30 @@ __create_page_tables:
sub r0, r0, r3 @ virt->phys offset
add r5, r5, r0 @ phys __enable_mmu
add r6, r6, r0 @ phys __enable_mmu_end
mov r5, r5, lsr #20
mov r6, r6, lsr #20
mov r5, r5, lsr #SECTION_SHIFT
mov r6, r6, lsr #SECTION_SHIFT
1: orr r3, r7, r5, lsl #20 @ flags + kernel base
str r3, [r4, r5, lsl #2] @ identity mapping
teq r5, r6
addne r5, r5, #1 @ next section
bne 1b
1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base
str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping
cmp r5, r6
addlo r5, r5, #1 @ next section
blo 1b
/*
* Now setup the pagetables for our kernel direct
* mapped region.
*/
mov r3, pc
mov r3, r3, lsr #20
orr r3, r7, r3, lsl #20
add r0, r4, #(KERNEL_START & 0xff000000) >> 18
str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
mov r3, r3, lsr #SECTION_SHIFT
orr r3, r7, r3, lsl #SECTION_SHIFT
add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
ldr r6, =(KERNEL_END - 1)
add r0, r0, #4
add r6, r4, r6, lsr #18
add r0, r0, #1 << PMD_ORDER
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
add r3, r3, #1 << 20
strls r3, [r0], #4
add r3, r3, #1 << SECTION_SHIFT
strls r3, [r0], #1 << PMD_ORDER
bls 1b
#ifdef CONFIG_XIP_KERNEL
......@@ -203,11 +207,11 @@ __create_page_tables:
*/
add r3, r8, #TEXT_OFFSET
orr r3, r3, r7
add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18
str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]!
ldr r6, =(_end - 1)
add r0, r0, #4
add r6, r4, r6, lsr #18
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
add r3, r3, #1 << 20
strls r3, [r0], #4
......@@ -218,12 +222,12 @@ __create_page_tables:
* Then map boot params address in r2 or
* the first 1MB of ram if boot params address is not specified.
*/
mov r0, r2, lsr #20
movs r0, r0, lsl #20
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
moveq r0, r8
sub r3, r0, r8
add r3, r3, #PAGE_OFFSET
add r3, r4, r3, lsr #18
add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
orr r6, r7, r0
str r6, [r3]
......@@ -236,21 +240,21 @@ __create_page_tables:
*/
addruart r7, r3
mov r3, r3, lsr #20
mov r3, r3, lsl #2
mov r3, r3, lsr #SECTION_SHIFT
mov r3, r3, lsl #PMD_ORDER
add r0, r4, r3
rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long)
cmp r3, #0x0800 @ limit to 512MB
movhi r3, #0x0800
add r6, r0, r3
mov r3, r7, lsr #20
mov r3, r7, lsr #SECTION_SHIFT
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
orr r3, r7, r3, lsl #20
orr r3, r7, r3, lsl #SECTION_SHIFT
1: str r3, [r0], #4
add r3, r3, #1 << 20
teq r0, r6
bne 1b
add r3, r3, #1 << SECTION_SHIFT
cmp r0, r6
blo 1b
#else /* CONFIG_DEBUG_ICEDCC */
/* we don't need any serial debugging mappings for ICEDCC */
......@@ -262,7 +266,7 @@ __create_page_tables:
* If we're using the NetWinder or CATS, we also need to map
* in the 16550-type serial port for the debug messages
*/
add r0, r4, #0xff000000 >> 18
add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER)
orr r3, r7, #0x7c000000
str r3, [r0]
#endif
......@@ -272,10 +276,10 @@ __create_page_tables:
* Similar reasons here - for debug. This is
* only for Acorn RiscPC architectures.
*/
add r0, r4, #0x02000000 >> 18
add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER)
orr r3, r7, #0x02000000
str r3, [r0]
add r0, r4, #0xd8000000 >> 18
add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER)
str r3, [r0]
#endif
#endif
......@@ -488,13 +492,8 @@ __fixup_pv_table:
add r5, r5, r3 @ adjust table end address
add r7, r7, r3 @ adjust __pv_phys_offset address
str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
mov r6, r3, lsr #24 @ constant for add/sub instructions
teq r3, r6, lsl #24 @ must be 16MiB aligned
#else
mov r6, r3, lsr #16 @ constant for add/sub instructions
teq r3, r6, lsl #16 @ must be 64kiB aligned
#endif
THUMB( it ne @ cross section branch )
bne __error
str r6, [r7, #4] @ save to __pv_offset
......@@ -510,20 +509,8 @@ ENDPROC(__fixup_pv_table)
.text
__fixup_a_pv_table:
#ifdef CONFIG_THUMB2_KERNEL
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
lsls r0, r6, #24
lsr r6, #8
beq 1f
clz r7, r0
lsr r0, #24
lsl r0, r7
bic r0, 0x0080
lsrs r7, #1
orrcs r0, #0x0080
orr r0, r0, r7, lsl #12
#endif
1: lsls r6, #24
beq 4f
lsls r6, #24
beq 2f
clz r7, r6
lsr r6, #24
lsl r6, r7
......@@ -532,43 +519,25 @@ __fixup_a_pv_table:
orrcs r6, #0x0080
orr r6, r6, r7, lsl #12
orr r6, #0x4000
b 4f
2: @ at this point the C flag is always clear
add r7, r3
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
ldrh ip, [r7]
tst ip, 0x0400 @ the i bit tells us LS or MS byte
beq 3f
cmp r0, #0 @ set C flag, and ...
biceq ip, 0x0400 @ immediate zero value has a special encoding
streqh ip, [r7] @ that requires the i bit cleared
#endif
3: ldrh ip, [r7, #2]
b 2f
1: add r7, r3
ldrh ip, [r7, #2]
and ip, 0x8f00
orrcc ip, r6 @ mask in offset bits 31-24
orrcs ip, r0 @ mask in offset bits 23-16
orr ip, r6 @ mask in offset bits 31-24
strh ip, [r7, #2]
4: cmp r4, r5
2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 2b
bcc 1b
bx lr
#else
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
and r0, r6, #255 @ offset bits 23-16
mov r6, r6, lsr #8 @ offset bits 31-24
#else
mov r0, #0 @ just in case...
#endif
b 3f
2: ldr ip, [r7, r3]
b 2f
1: ldr ip, [r7, r3]
bic ip, ip, #0x000000ff
tst ip, #0x400 @ rotate shift tells us LS or MS byte
orrne ip, ip, r6 @ mask in offset bits 31-24
orreq ip, ip, r0 @ mask in offset bits 23-16
orr ip, ip, r6 @ mask in offset bits 31-24
str ip, [r7, r3]
3: cmp r4, r5
2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
bcc 2b
bcc 1b
mov pc, lr
#endif
ENDPROC(__fixup_a_pv_table)
......
arch/arm/kernel/irq.c
View file @ 06afb1a0
......@@ -35,8 +35,8 @@
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
#include <linux/ftrace.h>
#include <asm/exception.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
......
arch/arm/kernel/module.c
View file @ 06afb1a0
......@@ -33,7 +33,7 @@
* recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
*/
#undef MODULES_VADDR
#define MODULES_VADDR (((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK)
#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK)
#endif
#ifdef CONFIG_MMU
......
arch/arm/kernel/smp.c
View file @ 06afb1a0
......@@ -16,7 +16,6 @@
#include <linux/cache.h>
#include <linux/profile.h>
#include <linux/errno.h>
#include <linux/ftrace.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
......@@ -31,6 +30,8 @@
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/exception.h>
#include <asm/topology.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
......@@ -39,6 +40,7 @@
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
#include <asm/smp_plat.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
......@@ -259,6 +261,20 @@ void __ref cpu_die(void)
}
#endif /* CONFIG_HOTPLUG_CPU */
int __cpu_logical_map[NR_CPUS];
void __init smp_setup_processor_id(void)
{
int i;
u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
cpu_logical_map(0) = cpu;
for (i = 1; i < NR_CPUS; ++i)
cpu_logical_map(i) = i == cpu ? 0 : i;
printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
}
/*
* Called by both boot and secondaries to move global data into
* per-processor storage.
......@@ -268,6 +284,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
cpu_info->loops_per_jiffy = loops_per_jiffy;
store_cpu_topology(cpuid);
}
/*
......@@ -358,6 +376,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int ncores = num_possible_cpus();
init_cpu_topology();
smp_store_cpu_info(smp_processor_id());
/*
......@@ -459,6 +479,11 @@ static void ipi_timer(void)
#ifdef CONFIG_LOCAL_TIMERS
asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
{
handle_local_timer(regs);
}
void handle_local_timer(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
......@@ -566,6 +591,11 @@ static void ipi_cpu_stop(unsigned int cpu)
* Main handler for inter-processor interrupts
*/
asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
{
handle_IPI(ipinr, regs);
}
void handle_IPI(int ipinr, struct pt_regs *regs)
{
unsigned int cpu = smp_processor_id();
struct pt_regs *old_regs = set_irq_regs(regs);
......
arch/arm/kernel/smp_scu.c
View file @ 06afb1a0
......@@ -34,7 +34,7 @@ unsigned int __init scu_get_core_count(void __iomem *scu_base)
/*
* Enable the SCU
*/
void __init scu_enable(void __iomem *scu_base)
void scu_enable(void __iomem *scu_base)
{
u32 scu_ctrl;
......
arch/arm/kernel/time.c
View file @ 06afb1a0
......@@ -39,13 +39,11 @@
*/
static struct sys_timer *system_timer;
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
/* this needs a better home */
DEFINE_SPINLOCK(rtc_lock);
#ifdef CONFIG_RTC_DRV_CMOS_MODULE
EXPORT_SYMBOL(rtc_lock);
#endif
#endif /* pc-style 'CMOS' RTC support */
/* change this if you have some constant time drift */
......
arch/arm/kernel/topology.c 0 → 100644
View file @ 06afb1a0
/*
* arch/arm/kernel/topology.c
*
* Copyright (C) 2011 Linaro Limited.
* Written by: Vincent Guittot
*
* based on arch/sh/kernel/topology.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/node.h>
#include <linux/nodemask.h>
#include <linux/sched.h>
#include <asm/cputype.h>
#include <asm/topology.h>
#define MPIDR_SMP_BITMASK (0x3 << 30)
#define MPIDR_SMP_VALUE (0x2 << 30)
#define MPIDR_MT_BITMASK (0x1 << 24)
/*
* These masks reflect the current use of the affinity levels.
* The affinity level can be up to 16 bits according to ARM ARM
*/
#define MPIDR_LEVEL0_MASK 0x3
#define MPIDR_LEVEL0_SHIFT 0
#define MPIDR_LEVEL1_MASK 0xF
#define MPIDR_LEVEL1_SHIFT 8
#define MPIDR_LEVEL2_MASK 0xFF
#define MPIDR_LEVEL2_SHIFT 16
struct cputopo_arm cpu_topology[NR_CPUS];
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
{
return &cpu_topology[cpu].core_sibling;
}
/*
* store_cpu_topology is called at boot when only one cpu is running
* and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
* which prevents simultaneous write access to cpu_topology array
*/
void store_cpu_topology(unsigned int cpuid)
{
struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid];
unsigned int mpidr;
unsigned int cpu;
/* If the cpu topology has been already set, just return */
if (cpuid_topo->core_id != -1)
return;
mpidr = read_cpuid_mpidr();
/* create cpu topology mapping */
if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) {
/*
* This is a multiprocessor system
* multiprocessor format & multiprocessor mode field are set
*/
if (mpidr & MPIDR_MT_BITMASK) {
/* core performance interdependency */
cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
& MPIDR_LEVEL0_MASK;
cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
& MPIDR_LEVEL1_MASK;
cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT)
& MPIDR_LEVEL2_MASK;
} else {
/* largely independent cores */
cpuid_topo->thread_id = -1;
cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
& MPIDR_LEVEL0_MASK;
cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
& MPIDR_LEVEL1_MASK;
}
} else {
/*
* This is an uniprocessor system
* we are in multiprocessor format but uniprocessor system
* or in the old uniprocessor format
*/
cpuid_topo->thread_id = -1;
cpuid_topo->core_id = 0;
cpuid_topo->socket_id = -1;
}
/* update core and thread sibling masks */
for_each_possible_cpu(cpu) {
struct cputopo_arm *cpu_topo = &cpu_topology[cpu];
if (cpuid_topo->socket_id == cpu_topo->socket_id) {
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu,
&cpuid_topo->core_sibling);
if (cpuid_topo->core_id == cpu_topo->core_id) {
cpumask_set_cpu(cpuid,
&cpu_topo->thread_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu,
&cpuid_topo->thread_sibling);
}
}
}
smp_wmb();
printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
cpuid, cpu_topology[cpuid].thread_id,
cpu_topology[cpuid].core_id,
cpu_topology[cpuid].socket_id, mpidr);
}
/*
* init_cpu_topology is called at boot when only one cpu is running
* which prevent simultaneous write access to cpu_topology array
*/
void init_cpu_topology(void)
{
unsigned int cpu;
/* init core mask */
for_each_possible_cpu(cpu) {
struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
cpu_topo->thread_id = -1;
cpu_topo->core_id = -1;
cpu_topo->socket_id = -1;
cpumask_clear(&cpu_topo->core_sibling);
cpumask_clear(&cpu_topo->thread_sibling);
}
smp_wmb();
}
arch/arm/kernel/traps.c
View file @ 06afb1a0
......@@ -27,6 +27,7 @@
#include <linux/atomic.h>
#include <asm/cacheflush.h>
#include <asm/exception.h>
#include <asm/system.h>
#include <asm/unistd.h>
#include <asm/traps.h>
......
arch/arm/lib/uaccess_with_memcpy.c
View file @ 06afb1a0
......@@ -17,6 +17,7 @@
#include <linux/sched.h>
#include <linux/hardirq.h> /* for in_atomic() */
#include <linux/gfp.h>
#include <linux/highmem.h>
#include <asm/current.h>
#include <asm/page.h>
......
arch/arm/mach-ebsa110/include/mach/io.h
View file @ 06afb1a0
......@@ -13,8 +13,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffff
u8 __inb8(unsigned int port);
void __outb8(u8 val, unsigned int port);
......
arch/arm/mach-exynos4/Kconfig
View file @ 06afb1a0
......@@ -12,6 +12,7 @@ if ARCH_EXYNOS4
config CPU_EXYNOS4210
bool
select S3C_PL330_DMA
select ARM_CPU_SUSPEND if PM
help
Enable EXYNOS4210 CPU support
......
arch/arm/mach-exynos4/platsmp.c
View file @ 06afb1a0
......@@ -193,12 +193,10 @@ void __init smp_init_cpus(void)
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > NR_CPUS) {
printk(KERN_WARNING
"EXYNOS4: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
......
arch/arm/mach-footbridge/include/mach/io.h
View file @ 06afb1a0
......@@ -23,8 +23,6 @@
#define PCIO_SIZE 0x00100000
#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000)
#define IO_SPACE_LIMIT 0xffff
/*
* Translation of various region addresses to virtual addresses
*/
......
arch/arm/mach-integrator/include/mach/io.h
View file @ 06afb1a0
......@@ -20,8 +20,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffff
/*
* WARNING: this has to mirror definitions in platform.h
*/
......
arch/arm/mach-ixp4xx/include/mach/io.h
View file @ 06afb1a0
......@@ -17,8 +17,6 @@
#include <mach/hardware.h>
#define IO_SPACE_LIMIT 0x0000ffff
extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
......
arch/arm/mach-msm/board-msm7x30.c
View file @ 06afb1a0
......@@ -24,6 +24,7 @@
#include <linux/smsc911x.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -42,6 +43,21 @@
extern struct sys_timer msm_timer;
static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
tag->u.mem.start = 0;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm7x30_reserve(void)
{
memblock_remove(0x0, SZ_2M);
}
static int hsusb_phy_init_seq[] = {
0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
0x02, 0x36, /* Disable CDR Auto Reset feature */
......@@ -107,6 +123,8 @@ static void __init msm7x30_map_io(void)
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
......@@ -115,6 +133,8 @@ MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
......@@ -123,6 +143,8 @@ MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
.boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
......
arch/arm/mach-msm/board-msm8960.c
View file @ 06afb1a0
......@@ -20,16 +20,34 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/clkdev.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include "devices.h"
static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
tag->u.mem.start == 0x40200000) {
tag->u.mem.start = 0x40000000;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm8960_reserve(void)
{
memblock_remove(0x40000000, SZ_2M);
}
static void __init msm8960_map_io(void)
{
msm_map_msm8960_io();
......@@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void)
}
MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
.fixup = msm8960_fixup,
.reserve = msm8960_reserve,
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
......@@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
MACHINE_END
MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
.fixup = msm8960_fixup,
.reserve = msm8960_reserve,
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
......
arch/arm/mach-msm/board-msm8x60.c
View file @ 06afb1a0
......@@ -20,14 +20,31 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&
tag->u.mem.start == 0x40200000) {
tag->u.mem.start = 0x40000000;
tag->u.mem.size += SZ_2M;
}
}
static void __init msm8x60_reserve(void)
{
memblock_remove(0x40000000, SZ_2M);
}
static void __init msm8x60_map_io(void)
{
......@@ -65,6 +82,8 @@ static void __init msm8x60_init(void)
}
MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
......@@ -72,6 +91,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
MACHINE_END
MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
......@@ -79,6 +100,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
MACHINE_END
MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
......@@ -86,6 +109,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
MACHINE_END
MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
......
arch/arm/mach-msm/include/mach/memory.h
View file @ 06afb1a0
......@@ -22,11 +22,11 @@
#elif defined(CONFIG_ARCH_QSD8X50)
#define PLAT_PHYS_OFFSET UL(0x20000000)
#elif defined(CONFIG_ARCH_MSM7X30)
#define PLAT_PHYS_OFFSET UL(0x00200000)
#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_ARCH_MSM8X60)
#define PLAT_PHYS_OFFSET UL(0x40200000)
#define PLAT_PHYS_OFFSET UL(0x40000000)
#elif defined(CONFIG_ARCH_MSM8960)
#define PLAT_PHYS_OFFSET UL(0x40200000)
#define PLAT_PHYS_OFFSET UL(0x40000000)
#else
#define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
......
arch/arm/mach-msm/platsmp.c
View file @ 06afb1a0
......@@ -156,6 +156,12 @@ void __init smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
......
arch/arm/mach-omap2/Kconfig
View file @ 06afb1a0
......@@ -36,6 +36,7 @@ config ARCH_OMAP3
select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
select ARCH_HAS_OPP
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
config ARCH_OMAP4
bool "TI OMAP4"
......@@ -50,6 +51,7 @@ config ARCH_OMAP4
select ARCH_HAS_OPP
select PM_OPP if PM
select USB_ARCH_HAS_EHCI
select ARM_CPU_SUSPEND if PM
comment "OMAP Core Type"
depends on ARCH_OMAP2
......
arch/arm/mach-omap2/omap-smp.c
View file @ 06afb1a0
......@@ -109,12 +109,10 @@ void __init smp_init_cpus(void)
ncores = scu_get_core_count(scu_base);
/* sanity check */
if (ncores > NR_CPUS) {
printk(KERN_WARNING
"OMAP4: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
......
arch/arm/mach-pxa/irq.c
View file @ 06afb1a0
......@@ -19,6 +19,8 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <asm/exception.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
......
arch/arm/mach-realview/platsmp.c
View file @ 06afb1a0
......@@ -52,12 +52,10 @@ void __init smp_init_cpus(void)
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > NR_CPUS) {
printk(KERN_WARNING
"Realview: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
......
arch/arm/mach-rpc/include/mach/hardware.h
View file @ 06afb1a0
......@@ -36,7 +36,7 @@
#define EASI_SIZE 0x08000000 /* EASI I/O */
#define EASI_START 0x08000000
#define EASI_BASE 0xe5000000
#define EASI_BASE IOMEM(0xe5000000)
#define IO_START 0x03000000 /* I/O */
#define IO_SIZE 0x01000000
......@@ -51,21 +51,20 @@
/*
* IO Addresses
*/
#define VIDC_BASE IOMEM(0xe0400000)
#define EXPMASK_BASE 0xe0360000
#define IOMD_BASE IOMEM(0xe0200000)
#define IOC_BASE IOMEM(0xe0200000)
#define PCIO_BASE IOMEM(0xe0010000)
#define FLOPPYDMA_BASE IOMEM(0xe002a000)
#define ECARD_EASI_BASE (EASI_BASE)
#define VIDC_BASE (IO_BASE + 0x00400000)
#define EXPMASK_BASE (IO_BASE + 0x00360000)
#define ECARD_IOC4_BASE (IO_BASE + 0x00270000)
#define ECARD_IOC_BASE (IO_BASE + 0x00240000)
#define IOMD_BASE (IO_BASE + 0x00200000)
#define IOC_BASE (IO_BASE + 0x00200000)
#define ECARD_MEMC8_BASE (IO_BASE + 0x0002b000)
#define FLOPPYDMA_BASE (IO_BASE + 0x0002a000)
#define PCIO_BASE (IO_BASE + 0x00010000)
#define ECARD_MEMC_BASE (IO_BASE + 0x00000000)
#define vidc_writel(val) __raw_writel(val, VIDC_BASE)
#define IO_EC_EASI_BASE 0x81400000
#define IO_EC_IOC4_BASE 0x8009c000
#define IO_EC_IOC_BASE 0x80090000
#define IO_EC_MEMC8_BASE 0x8000ac00
#define IO_EC_MEMC_BASE 0x80000000
#define NETSLOT_BASE 0x0302b000
#define NETSLOT_SIZE 0x00001000
......
arch/arm/mach-rpc/include/mach/io.h
View file @ 06afb1a0
......@@ -15,195 +15,18 @@
#include <mach/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
#define IO_SPACE_LIMIT 0xffff
/*
* We use two different types of addressing - PC style addresses, and ARM
* addresses. PC style accesses the PC hardware with the normal PC IO
* addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+
* and are translated to the start of IO. Note that all addresses are
* shifted left!
*/
#define __PORT_PCIO(x) (!((x) & 0x80000000))
/*
* Dynamic IO functions.
*/
static inline void __outb (unsigned int value, unsigned int port)
{
unsigned long temp;
__asm__ __volatile__(
"tst %2, #0x80000000\n\t"
"mov %0, %4\n\t"
"addeq %0, %0, %3\n\t"
"strb %1, [%0, %2, lsl #2] @ outb"
: "=&r" (temp)
: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
: "cc");
}
static inline void __outw (unsigned int value, unsigned int port)
{
unsigned long temp;
__asm__ __volatile__(
"tst %2, #0x80000000\n\t"
"mov %0, %4\n\t"
"addeq %0, %0, %3\n\t"
"str %1, [%0, %2, lsl #2] @ outw"
: "=&r" (temp)
: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
: "cc");
}
static inline void __outl (unsigned int value, unsigned int port)
{
unsigned long temp;
__asm__ __volatile__(
"tst %2, #0x80000000\n\t"
"mov %0, %4\n\t"
"addeq %0, %0, %3\n\t"
"str %1, [%0, %2, lsl #2] @ outl"
: "=&r" (temp)
: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
: "cc");
}
#define DECLARE_DYN_IN(sz,fnsuffix,instr) \
static inline unsigned sz __in##fnsuffix (unsigned int port) \
{ \
unsigned long temp, value; \
__asm__ __volatile__( \
"tst %2, #0x80000000\n\t" \
"mov %0, %4\n\t" \
"addeq %0, %0, %3\n\t" \
"ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \
: "=&r" (temp), "=r" (value) \
: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \
: "cc"); \
return (unsigned sz)value; \
}
static inline void __iomem *__deprecated __ioaddr(unsigned int port)
{
void __iomem *ret;
if (__PORT_PCIO(port))
ret = PCIO_BASE;
else
ret = IO_BASE;
return ret + (port << 2);
}
#define DECLARE_IO(sz,fnsuffix,instr) \
DECLARE_DYN_IN(sz,fnsuffix,instr)
DECLARE_IO(char,b,"b")
DECLARE_IO(short,w,"")
DECLARE_IO(int,l,"")
#undef DECLARE_IO
#undef DECLARE_DYN_IN
/*
* Constant address IO functions
* We need PC style IO addressing for:
* - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7)
* - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a)
* - 8250 serial (only for compile)
*
* These have to be macros for the 'J' constraint to work -
* +/-4096 immediate operand.
* These peripherals are found in an area of MMIO which looks very much
* like an ISA bus, but with registers at the low byte of each word.
*/
#define __outbc(value,port) \
({ \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"strb %0, [%1, %2] @ outbc" \
: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
else \
__asm__ __volatile__( \
"strb %0, [%1, %2] @ outbc" \
: : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \
})
#define __inbc(port) \
({ \
unsigned char result; \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"ldrb %0, [%1, %2] @ inbc" \
: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
else \
__asm__ __volatile__( \
"ldrb %0, [%1, %2] @ inbc" \
: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
result; \
})
#define __outwc(value,port) \
({ \
unsigned long __v = value; \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"str %0, [%1, %2] @ outwc" \
: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
else \
__asm__ __volatile__( \
"str %0, [%1, %2] @ outwc" \
: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \
})
#define __inwc(port) \
({ \
unsigned short result; \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"ldr %0, [%1, %2] @ inwc" \
: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
else \
__asm__ __volatile__( \
"ldr %0, [%1, %2] @ inwc" \
: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
result & 0xffff; \
})
#define __outlc(value,port) \
({ \
unsigned long __v = value; \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"str %0, [%1, %2] @ outlc" \
: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \
else \
__asm__ __volatile__( \
"str %0, [%1, %2] @ outlc" \
: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \
})
#define __inlc(port) \
({ \
unsigned long result; \
if (__PORT_PCIO((port))) \
__asm__ __volatile__( \
"ldr %0, [%1, %2] @ inlc" \
: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \
else \
__asm__ __volatile__( \
"ldr %0, [%1, %2] @ inlc" \
: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \
result; \
})
#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p))
#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p))
#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p))
#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
/* the following macro is deprecated */
#define ioaddr(port) ((unsigned long)__ioaddr((port)))
#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l)
#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l)
#define __io(a) (PCIO_BASE + ((a) << 2))
/*
* 1:1 mapping for ioremapped regions.
......
arch/arm/mach-rpc/riscpc.c
View file @ 06afb1a0
......@@ -74,7 +74,7 @@ static struct map_desc rpc_io_desc[] __initdata = {
.length = IO_SIZE ,
.type = MT_DEVICE
}, { /* EASI space */
.virtual = EASI_BASE,
.virtual = (unsigned long)EASI_BASE,
.pfn = __phys_to_pfn(EASI_START),
.length = EASI_SIZE,
.type = MT_DEVICE
......
arch/arm/mach-s3c2410/include/mach/io.h
View file @ 06afb1a0
......@@ -199,8 +199,6 @@ DECLARE_IO(int,l,"")
#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p))
/* the following macro is deprecated */
#define ioaddr(port) __ioaddr((port))
#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l)
#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l)
......
arch/arm/mach-sa1100/include/mach/io.h
View file @ 06afb1a0
......@@ -10,11 +10,9 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
/*
* We don't actually have real ISA nor PCI buses, but there is so many
* drivers out there that might just work if we fake them...
* __io() is required to be an equivalent mapping to __mem_pci() for
* SOC_COMMON to work.
*/
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
......
arch/arm/mach-shmobile/platsmp.c
View file @ 06afb1a0
......@@ -56,6 +56,12 @@ void __init smp_init_cpus(void)
unsigned int ncores = shmobile_smp_get_core_count();
unsigned int i;
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
......
arch/arm/mach-tegra/platsmp.c
View file @ 06afb1a0
......@@ -114,10 +114,10 @@ void __init smp_init_cpus(void)
{
unsigned int i, ncores = scu_get_core_count(scu_base);
if (ncores > NR_CPUS) {
printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
......
arch/arm/mach-ux500/platsmp.c
View file @ 06afb1a0
......@@ -156,12 +156,10 @@ void __init smp_init_cpus(void)
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > NR_CPUS) {
printk(KERN_WARNING
"U8500: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
......
arch/arm/mach-vexpress/ct-ca9x4.c
View file @ 06afb1a0
......@@ -221,6 +221,12 @@ static void ct_ca9x4_init_cpu_map(void)
{
int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
ncores, nr_cpu_ids);
ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
......
arch/arm/mach-vexpress/include/mach/io.h
View file @ 06afb1a0
......@@ -20,8 +20,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
......
arch/arm/mach-vt8500/include/mach/io.h
View file @ 06afb1a0
......@@ -20,8 +20,6 @@
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffff
#define __io(a) __typesafe_io((a) + 0xf0000000)
#define __mem_pci(a) (a)
......
arch/arm/mm/alignment.c
View file @ 06afb1a0
......@@ -86,16 +86,6 @@ core_param(alignment, ai_usermode, int, 0600);
#define UM_FIXUP (1 << 1)
#define UM_SIGNAL (1 << 2)
#ifdef CONFIG_PROC_FS
static const char *usermode_action[] = {
"ignored",
"warn",
"fixup",
"fixup+warn",
"signal",
"signal+warn"
};
/* Return true if and only if the ARMv6 unaligned access model is in use. */
static bool cpu_is_v6_unaligned(void)
{
......@@ -123,6 +113,16 @@ static int safe_usermode(int new_usermode, bool warn)
return new_usermode;
}
#ifdef CONFIG_PROC_FS
static const char *usermode_action[] = {
"ignored",
"warn",
"fixup",
"fixup+warn",
"signal",
"signal+warn"
};
static int alignment_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "User:\t\t%lu\n", ai_user);
......
arch/arm/mm/cache-l2x0.c
View file @ 06afb1a0
......@@ -16,9 +16,12 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
......@@ -30,11 +33,19 @@ static DEFINE_SPINLOCK(l2x0_lock);
static uint32_t l2x0_way_mask; /* Bitmask of active ways */
static uint32_t l2x0_size;
struct l2x0_regs l2x0_saved_regs;
struct l2x0_of_data {
void (*setup)(const struct device_node *, __u32 *, __u32 *);
void (*save)(void);
void (*resume)(void);
};
static inline void cache_wait_way(void __iomem *reg, unsigned long mask)
{
/* wait for cache operation by line or way to complete */
while (readl_relaxed(reg) & mask)
;
cpu_relax();
}
#ifdef CONFIG_CACHE_PL310
......@@ -277,7 +288,7 @@ static void l2x0_disable(void)
spin_unlock_irqrestore(&l2x0_lock, flags);
}
static void __init l2x0_unlock(__u32 cache_id)
static void l2x0_unlock(__u32 cache_id)
{
int lockregs;
int i;
......@@ -353,6 +364,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
/* l2x0 controller is disabled */
writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
l2x0_saved_regs.aux_ctrl = aux;
l2x0_inv_all();
/* enable L2X0 */
......@@ -372,3 +385,202 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
ways, cache_id, aux, l2x0_size);
}
#ifdef CONFIG_OF
static void __init l2x0_of_setup(const struct device_node *np,
__u32 *aux_val, __u32 *aux_mask)
{
u32 data[2] = { 0, 0 };
u32 tag = 0;
u32 dirty = 0;
u32 val = 0, mask = 0;
of_property_read_u32(np, "arm,tag-latency", &tag);
if (tag) {
mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK;
val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT;
}
of_property_read_u32_array(np, "arm,data-latency",
data, ARRAY_SIZE(data));
if (data[0] && data[1]) {
mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK |
L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK;
val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) |
((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT);
}
of_property_read_u32(np, "arm,dirty-latency", &dirty);
if (dirty) {
mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK;
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
}
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
}
static void __init pl310_of_setup(const struct device_node *np,
__u32 *aux_val, __u32 *aux_mask)
{
u32 data[3] = { 0, 0, 0 };
u32 tag[3] = { 0, 0, 0 };
u32 filter[2] = { 0, 0 };
of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
if (tag[0] && tag[1] && tag[2])
writel_relaxed(
((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
l2x0_base + L2X0_TAG_LATENCY_CTRL);
of_property_read_u32_array(np, "arm,data-latency",
data, ARRAY_SIZE(data));
if (data[0] && data[1] && data[2])
writel_relaxed(
((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) |
((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) |
((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT),
l2x0_base + L2X0_DATA_LATENCY_CTRL);
of_property_read_u32_array(np, "arm,filter-ranges",
filter, ARRAY_SIZE(filter));
if (filter[1]) {
writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M),
l2x0_base + L2X0_ADDR_FILTER_END);
writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN,
l2x0_base + L2X0_ADDR_FILTER_START);
}
}
static void __init pl310_save(void)
{
u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
L2X0_CACHE_ID_RTL_MASK;
l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base +
L2X0_TAG_LATENCY_CTRL);
l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base +
L2X0_DATA_LATENCY_CTRL);
l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base +
L2X0_ADDR_FILTER_END);
l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base +
L2X0_ADDR_FILTER_START);
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
/*
* From r2p0, there is Prefetch offset/control register
*/
l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base +
L2X0_PREFETCH_CTRL);
/*
* From r3p0, there is Power control register
*/
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base +
L2X0_POWER_CTRL);
}
}
static void l2x0_resume(void)
{
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
/* restore aux ctrl and enable l2 */
l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID));
writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base +
L2X0_AUX_CTRL);
l2x0_inv_all();
writel_relaxed(1, l2x0_base + L2X0_CTRL);
}
}
static void pl310_resume(void)
{
u32 l2x0_revision;
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
/* restore pl310 setup */
writel_relaxed(l2x0_saved_regs.tag_latency,
l2x0_base + L2X0_TAG_LATENCY_CTRL);
writel_relaxed(l2x0_saved_regs.data_latency,
l2x0_base + L2X0_DATA_LATENCY_CTRL);
writel_relaxed(l2x0_saved_regs.filter_end,
l2x0_base + L2X0_ADDR_FILTER_END);
writel_relaxed(l2x0_saved_regs.filter_start,
l2x0_base + L2X0_ADDR_FILTER_START);
l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) &
L2X0_CACHE_ID_RTL_MASK;
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) {
writel_relaxed(l2x0_saved_regs.prefetch_ctrl,
l2x0_base + L2X0_PREFETCH_CTRL);
if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0)
writel_relaxed(l2x0_saved_regs.pwr_ctrl,
l2x0_base + L2X0_POWER_CTRL);
}
}
l2x0_resume();
}
static const struct l2x0_of_data pl310_data = {
pl310_of_setup,
pl310_save,
pl310_resume,
};
static const struct l2x0_of_data l2x0_data = {
l2x0_of_setup,
NULL,
l2x0_resume,
};
static const struct of_device_id l2x0_ids[] __initconst = {
{ .compatible = "arm,pl310-cache", .data = (void *)&pl310_data },
{ .compatible = "arm,l220-cache", .data = (void *)&l2x0_data },
{ .compatible = "arm,l210-cache", .data = (void *)&l2x0_data },
{}
};
int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask)
{
struct device_node *np;
struct l2x0_of_data *data;
struct resource res;
np = of_find_matching_node(NULL, l2x0_ids);
if (!np)
return -ENODEV;
if (of_address_to_resource(np, 0, &res))
return -ENODEV;
l2x0_base = ioremap(res.start, resource_size(&res));
if (!l2x0_base)
return -ENOMEM;
l2x0_saved_regs.phy_base = res.start;
data = of_match_node(l2x0_ids, np)->data;
/* L2 configuration can only be changed if the cache is disabled */
if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
if (data->setup)
data->setup(np, &aux_val, &aux_mask);
}
if (data->save)
data->save();
l2x0_init(l2x0_base, aux_val, aux_mask);
outer_cache.resume = data->resume;
return 0;
}
#endif
arch/arm/mm/dma-mapping.c
View file @ 06afb1a0
......@@ -123,8 +123,8 @@ static void __dma_free_buffer(struct page *page, size_t size)
#endif
#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PMD_SHIFT)
#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PMD_SHIFT)
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
......@@ -183,7 +183,7 @@ static int __init consistent_init(void)
}
consistent_pte[i++] = pte;
base += (1 << PGDIR_SHIFT);
base += PMD_SIZE;
} while (base < CONSISTENT_END);
return ret;
......
arch/arm/mm/fault.c
View file @ 06afb1a0
......@@ -20,6 +20,7 @@
#include <linux/highmem.h>
#include <linux/perf_event.h>
#include <asm/exception.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
......
arch/arm/mm/mm.h
View file @ 06afb1a0
......@@ -12,8 +12,8 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
struct mem_type {
pteval_t prot_pte;
unsigned int prot_l1;
unsigned int prot_sect;
pmdval_t prot_l1;
pmdval_t prot_sect;
unsigned int domain;
};
......
arch/arm/mm/mmu.c
View file @ 06afb1a0
......@@ -60,7 +60,7 @@ EXPORT_SYMBOL(pgprot_kernel);
struct cachepolicy {
const char policy[16];
unsigned int cr_mask;
unsigned int pmd;
pmdval_t pmd;
pteval_t pte;
};
......@@ -288,7 +288,7 @@ static void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
unsigned int user_pgprot, kern_pgprot, vecs_pgprot;
pteval_t user_pgprot, kern_pgprot, vecs_pgprot;
int cpu_arch = cpu_architecture();
int i;
......@@ -863,14 +863,14 @@ static inline void prepare_page_table(void)
/*
* Clear out all the mappings below the kernel image.
*/
for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
/* The XIP kernel is mapped in the module area -- skip over it */
addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK;
addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
#endif
for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*
......@@ -885,10 +885,12 @@ static inline void prepare_page_table(void)
* memory bank, up to the end of the vmalloc region.
*/
for (addr = __phys_to_virt(end);
addr < VMALLOC_END; addr += PGDIR_SIZE)
addr < VMALLOC_END; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
}
#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
/*
* Reserve the special regions of memory
*/
......@@ -898,7 +900,7 @@ void __init arm_mm_memblock_reserve(void)
* Reserve the page tables. These are already in use,
* and can only be in node 0.
*/
memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE);
#ifdef CONFIG_SA1111
/*
......@@ -926,7 +928,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
*/
vectors_page = early_alloc(PAGE_SIZE);
for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
for (addr = VMALLOC_END; addr; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
/*
......
arch/arm/mm/proc-v7.S
View file @ 06afb1a0
......@@ -218,7 +218,7 @@ ENDPROC(cpu_v7_set_pte_ext)
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
.equ cpu_v7_suspend_size, 4 * 9
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v7_do_suspend)
stmfd sp!, {r4 - r11, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
......
arch/arm/plat-omap/Kconfig
View file @ 06afb1a0
......@@ -14,6 +14,7 @@ config ARCH_OMAP1
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select HAVE_IDE
help
"Systems based on omap7xx, omap15xx or omap16xx"
......
arch/arm/vfp/Makefile
View file @ 06afb1a0
......@@ -7,7 +7,7 @@
# ccflags-y := -DDEBUG
# asflags-y := -DDEBUG
KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp)
KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft)
LDFLAGS +=--no-warn-mismatch
obj-y += vfp.o
......
lib/Kconfig.debug
View file @ 06afb1a0
......@@ -1081,7 +1081,7 @@ config FAULT_INJECTION_STACKTRACE_FILTER
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
select FRAME_POINTER if !PPC && !S390 && !MICROBLAZE
select FRAME_POINTER if !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND
help
Provide stacktrace filter for fault-injection capabilities
......@@ -1091,7 +1091,7 @@ config LATENCYTOP
depends on DEBUG_KERNEL
depends on STACKTRACE_SUPPORT
depends on PROC_FS
select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE
select FRAME_POINTER if !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM_UNWIND
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7