Commit 06e2bf6b authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Tony Lindgren

ARM: dts: am43xx-epos-evm: McASP1 node for audio support

Add node for McASP1 along with the needed pinctrl entries.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 7ec341d9
...@@ -317,6 +317,24 @@ vpfe1_pins_sleep: vpfe1_pins_sleep { ...@@ -317,6 +317,24 @@ vpfe1_pins_sleep: vpfe1_pins_sleep {
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>; >;
}; };
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
}; };
&mmc1 { &mmc1 {
...@@ -706,3 +724,20 @@ vpfe1_ep: endpoint { ...@@ -706,3 +724,20 @@ vpfe1_ep: endpoint {
}; };
}; };
}; };
&mcasp1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_sleep_pins>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment