Skip to content

L
linux
Commit 07f00f06 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'mmc-v4.8' of git://git.linaro.org/people/ulf.hansson/mmc 

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - A couple of changes to improve the support for erase/discard/trim cmds
   - Add eMMC HS400 enhanced strobe support
   - Show OCR and DSR registers in SYSFS for MMC/SD cards
   - Correct and improve busy detection logic for MMC switch (CMD6) cmds
   - Disable HPI cmds for certain broken Hynix eMMC cards
   - Allow MMC hosts to specify non-support for SD and MMC cmds
   - Some minor additional fixes

  MMC host:
   - sdhci: Re-works, fixes and clean-ups
   - sdhci: Add HW auto re-tuning support
   - sdhci: Re-factor code to prepare for adding support for eMMC CMDQ
   - sdhci-esdhc-imx: Fixes and clean-ups
   - sdhci-esdhc-imx: Update system PM support
   - sdhci-esdhc-imx: Enable HW auto re-tuning
   - sdhci-bcm2835: Remove driver as sdhci-iproc is used instead
   - sdhci-brcmstb: Add new driver for Broadcom BRCMSTB SoCs
   - sdhci-msm: Add support for UHS cards
   - sdhci-tegra: Improve support for UHS cards
   - sdhci-of-arasan: Update phy support for Rockchip SoCs
   - sdhci-of-arasan: Deploy enhanced strobe support
   - dw_mmc: Some fixes and clean-ups
   - dw_mmc: Enable support for erase/discard/trim cmds
   - dw_mmc: Enable CMD23 support
   - mediatek: Some fixes related to the eMMC HS400 support
   - sh_mmcif: Improve support for HW busy detection
   - rtsx_pci: Enable support for erase/discard/trim cmds"

* tag 'mmc-v4.8' of git://git.linaro.org/people/ulf.hansson/mmc: (135 commits)
  mmc: rtsx_pci: Remove deprecated create_singlethread_workqueue
  mmc: rtsx_pci: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
  mmc: rtsx_pci: Use the provided busy timeout from the mmc core
  mmc: sdhci-pltfm: Drop define for SDHCI_PLTFM_PMOPS
  mmc: sdhci-pltfm: Convert to use the SET_SYSTEM_SLEEP_PM_OPS
  mmc: sdhci-pltfm: Make sdhci_pltfm_suspend|resume() static
  mmc: sdhci-esdhc-imx: Use common sdhci_suspend|resume_host()
  mmc: sdhci-esdhc-imx: Assign system PM ops within #ifdef CONFIG_PM_SLEEP
  mmc: sdhci-sirf: Remove non needed #ifdef CONFIG_PM* for dev_pm_ops
  mmc: sdhci-s3c: Remove non needed #ifdef CONFIG_PM for dev_pm_ops
  mmc: sdhci-pxav3: Remove non needed #ifdef CONFIG_PM for dev_pm_ops
  mmc: sdhci-of-esdhc: Simplify code by using SIMPLE_DEV_PM_OPS
  mmc: sdhci-acpi: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS
  mmc: sdhci-pci-core: Simplify code by using SET_SYSTEM_SLEEP_PM_OPS
  mmc: Change the max discard sectors and erase response when HW busy detect
  phy: rockchip-emmc: Wait even longer for the DLL to lock
  phy: rockchip-emmc: Be tolerant to card clock of 0 in power on
  mmc: sdhci-of-arasan: Revert: Always power the PHY off/on when clock changes
  mmc: sdhci-msm: Add support for UHS cards
  mmc: sdhci-msm: Add set_uhs_signaling() implementation
  ...
parents 27acbec3 6ea62579
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2127 additions and 1020 deletions
Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
View file @ 07f00f06
......@@ -9,8 +9,12 @@ Device Tree Bindings for the Arasan SDHCI Controller
[4] Documentation/devicetree/bindings/phy/phy-bindings.txt
Required Properties:
- compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or
'arasan,sdhci-4.9a' or 'arasan,sdhci-5.1'
- compatible: Compatibility string. One of:
- "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY
- "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY
- "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY
- "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY
For this device it is strongly suggested to include arasan,soc-ctl-syscon.
- reg: From mmc bindings: Register location and length.
- clocks: From clock bindings: Handles to clock inputs.
- clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
......@@ -22,6 +26,17 @@ Required Properties for "arasan,sdhci-5.1":
- phys: From PHY bindings: Phandle for the Generic PHY for arasan.
- phy-names: MUST be "phy_arasan".
Optional Properties:
- arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt)
used to access core corecfg registers. Offsets of registers in this
syscon are determined based on the main compatible string for the device.
- clock-output-names: If specified, this will be the name of the card clock
which will be exposed by this device. Required if #clock-cells is
specified.
- #clock-cells: If specified this should be the value <0>. With this property
in place we will export a clock representing the Card Clock. This clock
is expected to be consumed by our PHY. You must also specify
Example:
sdhci@e0100000 {
compatible = "arasan,sdhci-8.9a";
......@@ -42,3 +57,19 @@ Example:
phys = <&emmc_phy>;
phy-names = "phy_arasan";
} ;
sdhci: sdhci@fe330000 {
compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
reg = <0x0 0xfe330000 0x0 0x10000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
clock-names = "clk_xin", "clk_ahb";
arasan,soc-ctl-syscon = <&grf>;
assigned-clocks = <&cru SCLK_EMMC>;
assigned-clock-rates = <200000000>;
clock-output-names = "emmc_cardclock";
phys = <&emmc_phy>;
phy-names = "phy_arasan";
#clock-cells = <0>;
status = "disabled";
};
Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhci.txt deleted 100644 → 0
View file @ 27acbec3
Broadcom BCM2835 SDHCI controller
This file documents differences between the core properties described
by mmc.txt and the properties that represent the BCM2835 controller.
Required properties:
- compatible : Should be "brcm,bcm2835-sdhci".
- clocks : The clock feeding the SDHCI controller.
Example:
sdhci: sdhci {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
clocks = <&clk_mmc>;
bus-width = <4>;
};
Documentation/devicetree/bindings/mmc/brcm,bcm7425-sdhci.txt 0 → 100644
View file @ 07f00f06
* BROADCOM BRCMSTB/BMIPS SDHCI Controller
This file documents differences between the core properties in mmc.txt
and the properties used by the sdhci-brcmstb driver.
NOTE: The driver disables all UHS speed modes by default and depends
on Device Tree properties to enable them for SoC/Board combinations
that support them.
Required properties:
- compatible: "brcm,bcm7425-sdhci"
Refer to clocks/clock-bindings.txt for generic clock consumer properties.
Example:
sdhci@f03e0100 {
compatible = "brcm,bcm7425-sdhci";
reg = <0xf03e0000 0x100>;
interrupts = <0x0 0x26 0x0>;
sdhci,auto-cmd12;
clocks = <&sw_sdio>;
sd-uhs-sdr50;
sd-uhs-ddr50;
};
sdhci@f03e0300 {
non-removable;
bus-width = <0x8>;
compatible = "brcm,bcm7425-sdhci";
reg = <0xf03e0200 0x100>;
interrupts = <0x0 0x27 0x0>;
sdhci,auto-cmd12;
clocks = <sw_sdio>;
mmc-hs200-1_8v;
};
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
View file @ 07f00f06
......@@ -28,6 +28,8 @@ Optional properties:
transparent level shifters on the outputs of the controller. Two cells are
required, first cell specifies minimum slot voltage (mV), second cell
specifies maximum slot voltage (mV). Several ranges could be specified.
- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19
in tuning procedure.
- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure.
The uSDHC use one delay cell as default increasing step to do tuning process.
This property allows user to change the tuning step to more than one delay
......
Documentation/devicetree/bindings/mmc/mmc.txt
View file @ 07f00f06
......@@ -46,8 +46,12 @@ Optional properties:
- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported
- dsr: Value the card's (optional) Driver Stage Register (DSR) should be
programmed with. Valid range: [0 .. 0xffff].
- no-sdio: controller is limited to send sdio cmd during initialization
- no-sd: controller is limited to send sd cmd during initialization
- no-mmc: controller is limited to send mmc cmd during initialization
*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
polarity properties, we have to fix the meaning of the "normal" and "inverted"
......
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
View file @ 07f00f06
......@@ -7,6 +7,13 @@ Required properties:
- reg: PHY register address offset and length in "general
register files"
Optional clocks using the clock bindings (see ../clock/clock-bindings.txt),
specified by name:
- clock-names: Should contain "emmcclk". Although this is listed as optional
(because most boards can get basic functionality without having
access to it), it is strongly suggested.
- clocks: Should have a phandle to the card clock exported by the SDHCI driver.
Example:
......@@ -20,6 +27,8 @@ grf: syscon@ff770000 {
emmcphy: phy@f780 {
compatible = "rockchip,rk3399-emmc-phy";
reg = <0xf780 0x20>;
clocks = <&sdhci>;
clock-names = "emmcclk";
#phy-cells = <0>;
};
};
Documentation/mmc/mmc-dev-attrs.txt
View file @ 07f00f06
......@@ -28,6 +28,8 @@ All attributes are read-only.
preferred_erase_size Preferred erase size
raw_rpmb_size_mult RPMB partition size
rel_sectors Reliable write sector count
ocr Operation Conditions Register
dsr Driver Stage Register
Note on Erase Size and Preferred Erase Size:
......
MAINTAINERS
View file @ 07f00f06
......@@ -7863,6 +7863,7 @@ M: Ulf Hansson <ulf.hansson@linaro.org>
L: linux-mmc@vger.kernel.org
T: git git://git.linaro.org/people/ulf.hansson/mmc.git
S: Maintained
F: Documentation/devicetree/bindings/mmc/
F: drivers/mmc/
F: include/linux/mmc/
F: include/uapi/linux/mmc/
......@@ -10355,6 +10356,13 @@ F: tools/testing/selftests/seccomp/*
K: \bsecure_computing
K: \bTIF_SECCOMP\b
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) Broadcom BRCMSTB DRIVER
M: Al Cooper <alcooperx@gmail.com>
L: linux-mmc@vger.kernel.org
L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/mmc/host/sdhci-brcmstb*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
M: Ben Dooks <ben-linux@fluff.org>
M: Jaehoon Chung <jh80.chung@samsung.com>
......
drivers/mmc/card/block.c
View file @ 07f00f06
......@@ -1801,8 +1801,7 @@ static void mmc_blk_packed_hdr_wrq_prep(struct mmc_queue_req *mqrq,
do_data_tag = (card->ext_csd.data_tag_unit_size) &&
(prq->cmd_flags & REQ_META) &&
(rq_data_dir(prq) == WRITE) &&
((brq->data.blocks * brq->data.blksz) >=
card->ext_csd.data_tag_unit_size);
blk_rq_bytes(prq) >= card->ext_csd.data_tag_unit_size;
/* Argument of CMD23 */
packed_cmd_hdr[(i * 2)] = cpu_to_le32(
(do_rel_wr ? MMC_CMD23_ARG_REL_WR : 0) |
......@@ -1977,8 +1976,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
* When 4KB native sector is enabled, only 8 blocks
* multiple read or write is allowed
*/
if ((brq->data.blocks & 0x07) &&
(card->ext_csd.data_sector_size == 4096)) {
if (mmc_large_sector(card) &&
!IS_ALIGNED(blk_rq_sectors(rqc), 8)) {
pr_err("%s: Transfer size is not 4KB sector size aligned\n",
req->rq_disk->disk_name);
mq_rq = mq->mqrq_cur;
......@@ -2501,12 +2500,6 @@ static int mmc_add_disk(struct mmc_blk_data *md)
return ret;
}
#define CID_MANFID_SANDISK 0x2
#define CID_MANFID_TOSHIBA 0x11
#define CID_MANFID_MICRON 0x13
#define CID_MANFID_SAMSUNG 0x15
#define CID_MANFID_KINGSTON 0x70
static const struct mmc_fixup blk_fixups[] =
{
MMC_FIXUP("SEM02G", CID_MANFID_SANDISK, 0x100, add_quirk,
......
drivers/mmc/core/bus.c
View file @ 07f00f06
......@@ -332,12 +332,13 @@ int mmc_add_card(struct mmc_card *card)
mmc_card_ddr52(card) ? "DDR " : "",
type);
} else {
pr_info("%s: new %s%s%s%s%s card at address %04x\n",
pr_info("%s: new %s%s%s%s%s%s card at address %04x\n",
mmc_hostname(card->host),
mmc_card_uhs(card) ? "ultra high speed " :
(mmc_card_hs(card) ? "high speed " : ""),
mmc_card_hs400(card) ? "HS400 " :
(mmc_card_hs200(card) ? "HS200 " : ""),
mmc_card_hs400es(card) ? "Enhanced strobe " : "",
mmc_card_ddr52(card) ? "DDR " : "",
uhs_bus_speed_mode, type, card->rca);
}
......
drivers/mmc/core/core.c
View file @ 07f00f06
......@@ -1127,6 +1127,15 @@ void mmc_set_initial_state(struct mmc_host *host)
host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ios.timing = MMC_TIMING_LEGACY;
host->ios.drv_type = 0;
host->ios.enhanced_strobe = false;
/*
* Make sure we are in non-enhanced strobe mode before we
* actually enable it in ext_csd.
*/
if ((host->caps2 & MMC_CAP2_HS400_ES) &&
host->ops->hs400_enhanced_strobe)
host->ops->hs400_enhanced_strobe(host, &host->ios);
mmc_set_ios(host);
}
......@@ -1925,17 +1934,15 @@ void mmc_init_erase(struct mmc_card *card)
* to that size and alignment.
*
* For SD cards that define Allocation Unit size, limit erases to one
* Allocation Unit at a time. For MMC cards that define High Capacity
* Erase Size, whether it is switched on or not, limit to that size.
* Otherwise just have a stab at a good value. For modern cards it
* will end up being 4MiB. Note that if the value is too small, it
* can end up taking longer to erase.
* Allocation Unit at a time.
* For MMC, have a stab at ai good value and for modern cards it will
* end up being 4MiB. Note that if the value is too small, it can end
* up taking longer to erase. Also note, erase_size is already set to
* High Capacity Erase Size if available when this function is called.
*/
if (mmc_card_sd(card) && card->ssr.au) {
card->pref_erase = card->ssr.au;
card->erase_shift = ffs(card->ssr.au) - 1;
} else if (card->ext_csd.hc_erase_size) {
card->pref_erase = card->ext_csd.hc_erase_size;
} else if (card->erase_size) {
sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
if (sz < 128)
......@@ -2060,7 +2067,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
unsigned int to, unsigned int arg)
{
struct mmc_command cmd = {0};
unsigned int qty = 0;
unsigned int qty = 0, busy_timeout = 0;
bool use_r1b_resp = false;
unsigned long timeout;
int err;
......@@ -2128,8 +2136,22 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_ERASE;
cmd.arg = arg;
busy_timeout = mmc_erase_timeout(card, arg, qty);
/*
* If the host controller supports busy signalling and the timeout for
* the erase operation does not exceed the max_busy_timeout, we should
* use R1B response. Or we need to prevent the host from doing hw busy
* detection, which is done by converting to a R1 response instead.
*/
if (card->host->max_busy_timeout &&
busy_timeout > card->host->max_busy_timeout) {
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
} else {
cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
cmd.busy_timeout = mmc_erase_timeout(card, arg, qty);
cmd.busy_timeout = busy_timeout;
use_r1b_resp = true;
}
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
pr_err("mmc_erase: erase error %d, status %#x\n",
......@@ -2141,7 +2163,14 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
if (mmc_host_is_spi(card->host))
goto out;
timeout = jiffies + msecs_to_jiffies(MMC_CORE_TIMEOUT_MS);
/*
* In case of when R1B + MMC_CAP_WAIT_WHILE_BUSY is used, the polling
* shall be avoided.
*/
if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
goto out;
timeout = jiffies + msecs_to_jiffies(busy_timeout);
do {
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_SEND_STATUS;
......@@ -2321,23 +2350,41 @@ static unsigned int mmc_do_calc_max_discard(struct mmc_card *card,
unsigned int arg)
{
struct mmc_host *host = card->host;
unsigned int max_discard, x, y, qty = 0, max_qty, timeout;
unsigned int max_discard, x, y, qty = 0, max_qty, min_qty, timeout;
unsigned int last_timeout = 0;
if (card->erase_shift)
if (card->erase_shift) {
max_qty = UINT_MAX >> card->erase_shift;
else if (mmc_card_sd(card))
min_qty = card->pref_erase >> card->erase_shift;
} else if (mmc_card_sd(card)) {
max_qty = UINT_MAX;
else
min_qty = card->pref_erase;
} else {
max_qty = UINT_MAX / card->erase_size;
min_qty = card->pref_erase / card->erase_size;
}
/* Find the largest qty with an OK timeout */
/*
* We should not only use 'host->max_busy_timeout' as the limitation
* when deciding the max discard sectors. We should set a balance value
* to improve the erase speed, and it can not get too long timeout at
* the same time.
*
* Here we set 'card->pref_erase' as the minimal discard sectors no
* matter what size of 'host->max_busy_timeout', but if the
* 'host->max_busy_timeout' is large enough for more discard sectors,
* then we can continue to increase the max discard sectors until we
* get a balance value.
*/
do {
y = 0;
for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) {
timeout = mmc_erase_timeout(card, arg, qty + x);
if (timeout > host->max_busy_timeout)
if (qty + x > min_qty &&
timeout > host->max_busy_timeout)
break;
if (timeout < last_timeout)
break;
last_timeout = timeout;
......@@ -2491,6 +2538,7 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
mmc_go_idle(host);
if (!(host->caps2 & MMC_CAP2_NO_SD))
mmc_send_if_cond(host, host->ocr_avail);
/* Order's important: probe SDIO, then SD, then MMC */
......@@ -2498,8 +2546,11 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq)
if (!mmc_attach_sdio(host))
return 0;
if (!(host->caps2 & MMC_CAP2_NO_SD))
if (!mmc_attach_sd(host))
return 0;
if (!(host->caps2 & MMC_CAP2_NO_MMC))
if (!mmc_attach_mmc(host))
return 0;
......
drivers/mmc/core/debugfs.c
View file @ 07f00f06
......@@ -148,7 +148,8 @@ static int mmc_ios_show(struct seq_file *s, void *data)
str = "mmc HS200";
break;
case MMC_TIMING_MMC_HS400:
str = "mmc HS400";
str = mmc_card_hs400es(host->card) ?
"mmc HS400 enhanced strobe" : "mmc HS400";
break;
default:
str = "invalid";
......
drivers/mmc/core/host.c
View file @ 07f00f06
......@@ -313,6 +313,14 @@ int mmc_of_parse(struct mmc_host *host)
host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
if (of_property_read_bool(np, "mmc-hs400-1_2v"))
host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe"))
host->caps2 |= MMC_CAP2_HS400_ES;
if (of_property_read_bool(np, "no-sdio"))
host->caps2 |= MMC_CAP2_NO_SDIO;
if (of_property_read_bool(np, "no-sd"))
host->caps2 |= MMC_CAP2_NO_SD;
if (of_property_read_bool(np, "no-mmc"))
host->caps2 |= MMC_CAP2_NO_MMC;
host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr);
if (host->dsr_req && (host->dsr & ~0xffff)) {
......
drivers/mmc/core/mmc.c
View file @ 07f00f06
This diff is collapsed.
drivers/mmc/core/mmc_ops.c
View file @ 07f00f06
......@@ -480,6 +480,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
u32 status = 0;
bool use_r1b_resp = use_busy_signal;
bool expired = false;
bool busy = false;
mmc_retune_hold(host);
......@@ -533,21 +534,26 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
timeout_ms = MMC_OPS_TIMEOUT_MS;
/* Must check status to be sure of no errors. */
timeout = jiffies + msecs_to_jiffies(timeout_ms);
timeout = jiffies + msecs_to_jiffies(timeout_ms) + 1;
do {
if (send_status) {
/*
* Due to the possibility of being preempted after
* sending the status command, check the expiration
* time first.
*/
expired = time_after(jiffies, timeout);
if (send_status) {
err = __mmc_send_status(card, &status, ignore_crc);
if (err)
goto out;
}
if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
break;
if (host->ops->card_busy) {
if (!host->ops->card_busy(host))
break;
busy = true;
}
if (mmc_host_is_spi(host))
break;
......@@ -556,19 +562,20 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
* does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
* rely on waiting for the stated timeout to be sufficient.
*/
if (!send_status) {
if (!send_status && !host->ops->card_busy) {
mmc_delay(timeout_ms);
goto out;
}
/* Timeout if the device never leaves the program state. */
if (expired && R1_CURRENT_STATE(status) == R1_STATE_PRG) {
if (expired &&
(R1_CURRENT_STATE(status) == R1_STATE_PRG || busy)) {
pr_err("%s: Card stuck in programming state! %s\n",
mmc_hostname(host), __func__);
err = -ETIMEDOUT;
goto out;
}
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG || busy);
err = mmc_switch_status_error(host, status);
out:
......
drivers/mmc/core/quirks.c
View file @ 07f00f06
......@@ -72,6 +72,8 @@ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table)
f->cis_vendor == (u16) SDIO_ANY_ID) &&
(f->cis_device == card->cis.device ||
f->cis_device == (u16) SDIO_ANY_ID) &&
(f->ext_csd_rev == EXT_CSD_REV_ANY ||
f->ext_csd_rev == card->ext_csd.rev) &&
rev >= f->rev_start && rev <= f->rev_end) {
dev_dbg(&card->dev, "calling %pf\n", f->vendor_fixup);
f->vendor_fixup(card, f->data);
......
drivers/mmc/core/sd.c
View file @ 07f00f06
......@@ -675,8 +675,25 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
MMC_DEV_ATTR(ocr, "%08x\n", card->ocr);
static ssize_t mmc_dsr_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
if (card->csd.dsr_imp && host->dsr_req)
return sprintf(buf, "0x%x\n", host->dsr);
else
/* return default DSR value */
return sprintf(buf, "0x%x\n", 0x404);
}
static DEVICE_ATTR(dsr, S_IRUGO, mmc_dsr_show, NULL);
static struct attribute *sd_std_attrs[] = {
&dev_attr_cid.attr,
&dev_attr_csd.attr,
......@@ -690,6 +707,8 @@ static struct attribute *sd_std_attrs[] = {
&dev_attr_name.attr,
&dev_attr_oemid.attr,
&dev_attr_serial.attr,
&dev_attr_ocr.attr,
&dev_attr_dsr.attr,
NULL,
};
ATTRIBUTE_GROUPS(sd_std);
......
drivers/mmc/host/Kconfig
View file @ 07f00f06
......@@ -122,6 +122,7 @@ config MMC_SDHCI_OF_ARASAN
tristate "SDHCI OF support for the Arasan SDHCI controllers"
depends on MMC_SDHCI_PLTFM
depends on OF
depends on COMMON_CLK
help
This selects the Arasan Secure Digital Host Controller Interface
(SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
......@@ -296,17 +297,6 @@ config MMC_SDHCI_BCM_KONA
If you have a controller with this interface, say Y or M here.
config MMC_SDHCI_BCM2835
tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
depends on ARCH_BCM2835
depends on MMC_SDHCI_PLTFM
select MMC_SDHCI_IO_ACCESSORS
help
This selects the BCM2835 SD/MMC controller. If you have a BCM2835
platform with SD or MMC devices, say Y or M here.
If unsure, say N.
config MMC_SDHCI_F_SDH30
tristate "SDHCI support for Fujitsu Semiconductor F_SDH30"
depends on MMC_SDHCI_PLTFM
......@@ -798,3 +788,13 @@ config MMC_SDHCI_MICROCHIP_PIC32
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config MMC_SDHCI_BRCMSTB
tristate "Broadcom SDIO/SD/MMC support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC
depends on MMC_SDHCI_PLTFM
default y
help
This selects support for the SDIO/SD/MMC Host Controller on
Broadcom STB SoCs.
If unsure, say Y.
drivers/mmc/host/Makefile
View file @ 07f00f06
......@@ -71,11 +71,11 @@ obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o
obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o
obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o
obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o
obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
......
drivers/mmc/host/dw_mmc-exynos.c
View file @ 07f00f06
......@@ -157,7 +157,7 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
* HOLD register should be bypassed in case there is no phase shift
* applied on CMD/DATA that is sent to the card.
*/
if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel))
if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel) && host->cur_slot)
set_bit(DW_MMC_CARD_NO_USE_HOLD, &host->cur_slot->flags);
}
......
drivers/mmc/host/dw_mmc-k3.c
View file @ 07f00f06
......@@ -32,6 +32,12 @@ struct k3_priv {
struct regmap *reg;
};
static unsigned long dw_mci_hi6220_caps[] = {
MMC_CAP_CMD23,
MMC_CAP_CMD23,
0
};
static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
{
int ret;
......@@ -126,6 +132,7 @@ static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios)
}
static const struct dw_mci_drv_data hi6220_data = {
.caps = dw_mci_hi6220_caps,
.switch_voltage = dw_mci_hi6220_switch_voltage,
.set_ios = dw_mci_hi6220_set_ios,
.parse_dt = dw_mci_hi6220_parse_dt,
......
drivers/mmc/host/dw_mmc-rockchip.c
View file @ 07f00f06
......@@ -285,9 +285,6 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
/* It is slot 8 on Rockchip SoCs */
host->sdio_id0 = 8;
/* It needs this quirk on all Rockchip SoCs */
host->pdata->quirks |= DW_MCI_QUIRK_BROKEN_DTO;
if (of_device_is_compatible(host->dev->of_node,
"rockchip,rk3288-dw-mshc"))
host->bus_hz /= RK3288_CLKGEN_DIV;
......@@ -297,10 +294,10 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
/* Common capabilities of RK3288 SoC */
static unsigned long dw_mci_rk3288_dwmmc_caps[4] = {
MMC_CAP_ERASE | MMC_CAP_CMD23,
MMC_CAP_ERASE | MMC_CAP_CMD23,
MMC_CAP_ERASE | MMC_CAP_CMD23,
MMC_CAP_ERASE | MMC_CAP_CMD23,
MMC_CAP_CMD23,
MMC_CAP_CMD23,
MMC_CAP_CMD23,
MMC_CAP_CMD23,
};
static const struct dw_mci_drv_data rk2928_drv_data = {
......
drivers/mmc/host/dw_mmc.c
View file @ 07f00f06
......@@ -44,11 +44,11 @@
/* Common flag combinations */
#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
SDMMC_INT_HTO | SDMMC_INT_SBE | \
SDMMC_INT_EBE)
SDMMC_INT_EBE | SDMMC_INT_HLE)
#define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \
SDMMC_INT_RESP_ERR)
SDMMC_INT_RESP_ERR | SDMMC_INT_HLE)
#define DW_MCI_ERROR_FLAGS (DW_MCI_DATA_ERROR_FLAGS | \
DW_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
DW_MCI_CMD_ERROR_FLAGS)
#define DW_MCI_SEND_STATUS 1
#define DW_MCI_RECV_STATUS 2
#define DW_MCI_DMA_THRESHOLD 16
......@@ -92,7 +92,7 @@ struct idmac_desc {
__le32 des1; /* Buffer sizes */
#define IDMAC_SET_BUFFER1_SIZE(d, s) \
((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
((d)->des1 = ((d)->des1 & cpu_to_le32(0x03ffe000)) | (cpu_to_le32((s) & 0x1fff)))
__le32 des2; /* buffer 1 physical address */
......@@ -105,6 +105,7 @@ struct idmac_desc {
static bool dw_mci_reset(struct dw_mci *host);
static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
static int dw_mci_card_busy(struct mmc_host *mmc);
static int dw_mci_get_cd(struct mmc_host *mmc);
#if defined(CONFIG_DEBUG_FS)
static int dw_mci_req_show(struct seq_file *s, void *v)
......@@ -898,23 +899,35 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
mci_writel(host, FIFOTH, fifoth_val);
}
static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
static void dw_mci_ctrl_thld(struct dw_mci *host, struct mmc_data *data)
{
unsigned int blksz = data->blksz;
u32 blksz_depth, fifo_depth;
u16 thld_size;
WARN_ON(!(data->flags & MMC_DATA_READ));
u8 enable;
/*
* CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
* in the FIFO region, so we really shouldn't access it).
*/
if (host->verid < DW_MMC_240A)
if (host->verid < DW_MMC_240A ||
(host->verid < DW_MMC_280A && data->flags & MMC_DATA_WRITE))
return;
/*
* Card write Threshold is introduced since 2.80a
* It's used when HS400 mode is enabled.
*/
if (data->flags & MMC_DATA_WRITE &&
!(host->timing != MMC_TIMING_MMC_HS400))
return;
if (data->flags & MMC_DATA_WRITE)
enable = SDMMC_CARD_WR_THR_EN;
else
enable = SDMMC_CARD_RD_THR_EN;
if (host->timing != MMC_TIMING_MMC_HS200 &&
host->timing != MMC_TIMING_MMC_HS400 &&
host->timing != MMC_TIMING_UHS_SDR104)
goto disable;
......@@ -930,11 +943,11 @@ static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
* Currently just choose blksz.
*/
thld_size = blksz;
mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
mci_writel(host, CDTHRCTL, SDMMC_SET_THLD(thld_size, enable));
return;
disable:
mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
mci_writel(host, CDTHRCTL, 0);
}
static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
......@@ -1005,12 +1018,12 @@ static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
host->sg = NULL;
host->data = data;
if (data->flags & MMC_DATA_READ) {
if (data->flags & MMC_DATA_READ)
host->dir_status = DW_MCI_RECV_STATUS;
dw_mci_ctrl_rd_thld(host, data);
} else {
else
host->dir_status = DW_MCI_SEND_STATUS;
}
dw_mci_ctrl_thld(host, data);
if (dw_mci_submit_data_dma(host, data)) {
if (host->data->flags & MMC_DATA_READ)
......@@ -1099,7 +1112,6 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
if ((clock << div) != slot->__clk_old || force_clkinit)
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
slot->id, host->bus_hz, clock,
......@@ -1127,9 +1139,6 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
/* inform CIU */
mci_send_cmd(slot, sdmmc_cmd_bits, 0);
/* keep the clock with reflecting clock dividor */
slot->__clk_old = clock << div;
}
host->current_speed = clock;
......@@ -1253,15 +1262,15 @@ static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
* atomic, otherwise the card could be removed in between and the
* request wouldn't fail until another card was inserted.
*/
spin_lock_bh(&host->lock);
if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
spin_unlock_bh(&host->lock);
if (!dw_mci_get_cd(mmc)) {
mrq->cmd->error = -ENOMEDIUM;
mmc_request_done(mmc, mrq);
return;
}
spin_lock_bh(&host->lock);
dw_mci_queue_request(host, slot, mrq);
spin_unlock_bh(&host->lock);
......@@ -1451,8 +1460,7 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
int gpio_cd = mmc_gpio_get_cd(mmc);
/* Use platform get_cd function, else try onboard card detect */
if ((mmc->caps & MMC_CAP_NEEDS_POLL) ||
(mmc->caps & MMC_CAP_NONREMOVABLE))
if ((mmc->caps & MMC_CAP_NEEDS_POLL) || !mmc_card_is_removable(mmc))
present = 1;
else if (gpio_cd >= 0)
present = gpio_cd;
......@@ -1761,6 +1769,33 @@ static void dw_mci_tasklet_func(unsigned long priv)
}
if (cmd->data && err) {
/*
* During UHS tuning sequence, sending the stop
* command after the response CRC error would
* throw the system into a confused state
* causing all future tuning phases to report
* failure.
*
* In such case controller will move into a data
* transfer state after a response error or
* response CRC error. Let's let that finish
* before trying to send a stop, so we'll go to
* STATE_SENDING_DATA.
*
* Although letting the data transfer take place
* will waste a bit of time (we already know
* the command was bad), it can't cause any
* errors since it's possible it would have
* taken place anyway if this tasklet got
* delayed. Allowing the transfer to take place
* avoids races and keeps things simple.
*/
if ((err != -ETIMEDOUT) &&
(cmd->opcode == MMC_SEND_TUNING_BLOCK)) {
state = STATE_SENDING_DATA;
continue;
}
dw_mci_stop_dma(host);
send_stop_abort(host, data);
state = STATE_SENDING_STOP;
......@@ -1801,8 +1836,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
* If all data-related interrupts don't come
* within the given time in reading data state.
*/
if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
(host->dir_status == DW_MCI_RECV_STATUS))
if (host->dir_status == DW_MCI_RECV_STATUS)
dw_mci_set_drto(host);
break;
}
......@@ -1844,8 +1878,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
* interrupt doesn't come within the given time.
* in reading data state.
*/
if ((host->quirks & DW_MCI_QUIRK_BROKEN_DTO) &&
(host->dir_status == DW_MCI_RECV_STATUS))
if (host->dir_status == DW_MCI_RECV_STATUS)
dw_mci_set_drto(host);
break;
}
......@@ -2411,7 +2444,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
}
if (pending & SDMMC_INT_DATA_OVER) {
if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
del_timer(&host->dto_timer);
mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
......@@ -2474,6 +2506,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
if (!test_bit(EVENT_DATA_ERROR, &host->pending_events))
host->dma_ops->complete((void *)host);
}
} else {
......@@ -2482,6 +2515,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
if (!test_bit(EVENT_DATA_ERROR, &host->pending_events))
host->dma_ops->complete((void *)host);
}
}
......@@ -2570,6 +2604,12 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
if (host->pdata->caps)
mmc->caps = host->pdata->caps;
/*
* Support MMC_CAP_ERASE by default.
* It needs to use trim/discard/erase commands.
*/
mmc->caps |= MMC_CAP_ERASE;
if (host->pdata->pm_caps)
mmc->pm_caps = host->pdata->pm_caps;
......@@ -2616,10 +2656,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
mmc->max_seg_size = mmc->max_req_size;
}
if (dw_mci_get_cd(mmc))
set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
else
clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
dw_mci_get_cd(mmc);
ret = mmc_add_host(mmc);
if (ret)
......@@ -3006,9 +3043,6 @@ int dw_mci_probe(struct dw_mci *host)
setup_timer(&host->cmd11_timer,
dw_mci_cmd11_timer, (unsigned long)host);
host->quirks = host->pdata->quirks;
if (host->quirks & DW_MCI_QUIRK_BROKEN_DTO)
setup_timer(&host->dto_timer,
dw_mci_dto_timer, (unsigned long)host);
......
drivers/mmc/host/dw_mmc.h
View file @ 07f00f06
......@@ -15,6 +15,7 @@
#define _DW_MMC_H_
#define DW_MMC_240A 0x240a
#define DW_MMC_280A 0x280a
#define SDMMC_CTRL 0x000
#define SDMMC_PWREN 0x004
......@@ -175,7 +176,10 @@
/* Version ID register define */
#define SDMMC_GET_VERID(x) ((x) & 0xFFFF)
/* Card read threshold */
#define SDMMC_SET_RD_THLD(v, x) (((v) & 0xFFF) << 16 | (x))
#define SDMMC_SET_THLD(v, x) (((v) & 0xFFF) << 16 | (x))
#define SDMMC_CARD_WR_THR_EN BIT(2)
#define SDMMC_CARD_RD_THR_EN BIT(0)
/* UHS-1 register defines */
#define SDMMC_UHS_18V BIT(0)
/* All ctrl reset bits */
#define SDMMC_CTRL_ALL_RESET_FLAGS \
......@@ -245,9 +249,6 @@ extern int dw_mci_resume(struct dw_mci *host);
* @queue_node: List node for placing this node in the @queue list of
* &struct dw_mci.
* @clock: Clock rate configured by set_ios(). Protected by host->lock.
* @__clk_old: The last updated clock with reflecting clock divider.
* Keeping track of this helps us to avoid spamming the console
* with CONFIG_MMC_CLKGATE.
* @flags: Random state bits associated with the slot.
* @id: Number of this slot.
* @sdio_id: Number of this slot in the SDIO interrupt registers.
......@@ -262,7 +263,6 @@ struct dw_mci_slot {
struct list_head queue_node;
unsigned int clock;
unsigned int __clk_old;
unsigned long flags;
#define DW_MMC_CARD_PRESENT 0
......
drivers/mmc/host/mtk-sd.c
View file @ 07f00f06
......@@ -287,6 +287,11 @@ struct msdc_save_para {
u32 emmc50_cfg0;
};
struct msdc_tune_para {
u32 iocon;
u32 pad_tune;
};
struct msdc_delay_phase {
u8 maxlen;
u8 start;
......@@ -326,7 +331,10 @@ struct msdc_host {
unsigned char timing;
bool vqmmc_enabled;
u32 hs400_ds_delay;
bool hs400_mode; /* current eMMC will run at hs400 mode */
struct msdc_save_para save_para; /* used when gate HCLK */
struct msdc_tune_para def_tune_para; /* default tune setting */
struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
};
static void sdr_set_bits(void __iomem *reg, u32 bs)
......@@ -582,6 +590,18 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
sdr_set_bits(host->base + MSDC_INTEN, flags);
/*
* mmc_select_hs400() will drop to 50Mhz and High speed mode,
* tune result of hs200/200Mhz is not suitable for 50Mhz
*/
if (host->sclk <= 52000000) {
writel(host->def_tune_para.iocon, host->base + MSDC_IOCON);
writel(host->def_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
} else {
writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
}
dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing);
}
......@@ -781,6 +801,12 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
}
if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
if (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
/*
* should not clear fifo/interrupt as the tune data
* may have alreay come.
*/
msdc_reset_hw(host);
if (events & MSDC_INT_RSPCRCERR) {
cmd->error = -EILSEQ;
......@@ -865,7 +891,11 @@ static void msdc_start_command(struct msdc_host *host,
static void msdc_cmd_next(struct msdc_host *host,
struct mmc_request *mrq, struct mmc_command *cmd)
{
if (cmd->error || (mrq->sbc && mrq->sbc->error))
if ((cmd->error &&
!(cmd->error == -EILSEQ &&
(cmd->opcode == MMC_SEND_TUNING_BLOCK ||
cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))) ||
(mrq->sbc && mrq->sbc->error))
msdc_request_done(host, mrq);
else if (cmd == mrq->sbc)
msdc_start_command(host, mrq, mrq->cmd);
......@@ -1158,6 +1188,8 @@ static void msdc_init_hw(struct msdc_host *host)
/* Configure to default data timeout */
sdr_set_field(host->base + SDC_CFG, SDC_CFG_DTOC, 3);
host->def_tune_para.iocon = readl(host->base + MSDC_IOCON);
host->def_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
dev_dbg(host->dev, "init hardware done!");
}
......@@ -1296,7 +1328,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
{
struct msdc_host *host = mmc_priv(mmc);
u32 rise_delay = 0, fall_delay = 0;
struct msdc_delay_phase final_rise_delay, final_fall_delay;
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
u8 final_delay, final_maxlen;
int cmd_err;
int i;
......@@ -1309,6 +1341,11 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
if (!cmd_err)
rise_delay |= (1 << i);
}
final_rise_delay = get_best_delay(host, rise_delay);
/* if rising edge has enough margin, then do not scan falling edge */
if (final_rise_delay.maxlen >= 10 ||
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
......@@ -1318,10 +1355,9 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
if (!cmd_err)
fall_delay |= (1 << i);
}
final_rise_delay = get_best_delay(host, rise_delay);
final_fall_delay = get_best_delay(host, fall_delay);
skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
......@@ -1342,7 +1378,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
{
struct msdc_host *host = mmc_priv(mmc);
u32 rise_delay = 0, fall_delay = 0;
struct msdc_delay_phase final_rise_delay, final_fall_delay;
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
u8 final_delay, final_maxlen;
int i, ret;
......@@ -1355,6 +1391,11 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (!ret)
rise_delay |= (1 << i);
}
final_rise_delay = get_best_delay(host, rise_delay);
/* if rising edge has enough margin, then do not scan falling edge */
if (final_rise_delay.maxlen >= 10 ||
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
......@@ -1365,14 +1406,10 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (!ret)
fall_delay |= (1 << i);
}
final_rise_delay = get_best_delay(host, rise_delay);
final_fall_delay = get_best_delay(host, fall_delay);
skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
/* Rising edge is more stable, prefer to use it */
if (final_rise_delay.maxlen >= 10)
final_maxlen = final_rise_delay.maxlen;
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
......@@ -1402,16 +1439,21 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
dev_err(host->dev, "Tune response fail!\n");
return ret;
}
if (host->hs400_mode == false) {
ret = msdc_tune_data(mmc, opcode);
if (ret == -EIO)
dev_err(host->dev, "Tune data fail!\n");
}
host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
return ret;
}
static int msdc_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct msdc_host *host = mmc_priv(mmc);
host->hs400_mode = true;
writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE);
return 0;
......
drivers/mmc/host/mxcmmc.c
View file @ 07f00f06
......@@ -1065,7 +1065,7 @@ static int mxcmci_probe(struct platform_device *pdev)
if (pdata)
dat3_card_detect = pdata->dat3_card_detect;
else if (!(mmc->caps & MMC_CAP_NONREMOVABLE)
else if (mmc_card_is_removable(mmc)
&& !of_property_read_bool(pdev->dev.of_node, "cd-gpios"))
dat3_card_detect = true;
......
drivers/mmc/host/rtsx_pci_sdmmc.c
View file @ 07f00f06
......@@ -38,7 +38,6 @@ struct realtek_pci_sdmmc {
struct rtsx_pcr *pcr;
struct mmc_host *mmc;
struct mmc_request *mrq;
struct workqueue_struct *workq;
#define SDMMC_WORKQ_NAME "rtsx_pci_sdmmc_workq"
struct work_struct work;
......@@ -244,7 +243,7 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
stat_idx = sd_status_index(rsp_type);
if (rsp_type == SD_RSP_TYPE_R1b)
timeout = 3000;
timeout = cmd->busy_timeout ? cmd->busy_timeout : 3000;
if (cmd->opcode == SD_SWITCH_VOLTAGE) {
err = rtsx_pci_write_register(pcr, SD_BUS_STAT,
......@@ -885,7 +884,7 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
if (sd_rw_cmd(mrq->cmd) || sdio_extblock_cmd(mrq->cmd, data))
host->using_cookie = sd_pre_dma_transfer(host, data, false);
queue_work(host->workq, &host->work);
schedule_work(&host->work);
}
static int sd_set_bus_width(struct realtek_pci_sdmmc *host,
......@@ -1360,7 +1359,7 @@ static void realtek_init_host(struct realtek_pci_sdmmc *host)
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_BUS_WIDTH_TEST |
MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_ERASE;
mmc->caps2 = MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_FULL_PWR_CYCLE;
mmc->max_current_330 = 400;
mmc->max_current_180 = 800;
......@@ -1404,11 +1403,6 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
return -ENOMEM;
host = mmc_priv(mmc);
host->workq = create_singlethread_workqueue(SDMMC_WORKQ_NAME);
if (!host->workq) {
mmc_free_host(mmc);
return -ENOMEM;
}
host->pcr = pcr;
host->mmc = mmc;
host->pdev = pdev;
......@@ -1462,9 +1456,7 @@ static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev)
mmc_remove_host(mmc);
host->eject = true;
flush_workqueue(host->workq);
destroy_workqueue(host->workq);
host->workq = NULL;
flush_work(&host->work);
mmc_free_host(mmc);
......
drivers/mmc/host/s3cmci.c
View file @ 07f00f06
......@@ -1365,7 +1365,7 @@ static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
.no_detect = 1,
};
#ifdef CONFIG_CPU_FREQ
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
static int s3cmci_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
......
drivers/mmc/host/s3cmci.h
View file @ 07f00f06
......@@ -74,7 +74,7 @@ struct s3cmci_host {
struct dentry *debug_regs;
#endif
#ifdef CONFIG_CPU_FREQ
#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
struct notifier_block freq_transition;
#endif
};
drivers/mmc/host/sdhci-acpi.c
View file @ 07f00f06
......@@ -532,11 +532,6 @@ static int sdhci_acpi_resume(struct device *dev)
return sdhci_resume_host(c->host);
}
#else
#define sdhci_acpi_suspend NULL
#define sdhci_acpi_resume NULL
#endif
#ifdef CONFIG_PM
......@@ -560,8 +555,7 @@ static int sdhci_acpi_runtime_resume(struct device *dev)
#endif
static const struct dev_pm_ops sdhci_acpi_pm_ops = {
.suspend = sdhci_acpi_suspend,
.resume = sdhci_acpi_resume,
SET_SYSTEM_SLEEP_PM_OPS(sdhci_acpi_suspend, sdhci_acpi_resume)
SET_RUNTIME_PM_OPS(sdhci_acpi_runtime_suspend,
sdhci_acpi_runtime_resume, NULL)
};
......
drivers/mmc/host/sdhci-bcm-kona.c
View file @ 07f00f06
......@@ -264,12 +264,12 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
}
dev_dbg(dev, "non-removable=%c\n",
(host->mmc->caps & MMC_CAP_NONREMOVABLE) ? 'Y' : 'N');
mmc_card_is_removable(host->mmc) ? 'N' : 'Y');
dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n",
(mmc_gpio_get_cd(host->mmc) != -ENOSYS) ? 'Y' : 'N',
(mmc_gpio_get_ro(host->mmc) != -ENOSYS) ? 'Y' : 'N');
if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
if (!mmc_card_is_removable(host->mmc))
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
dev_dbg(dev, "is_8bit=%c\n",
......@@ -288,7 +288,7 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
}
/* if device is eMMC, emulate card insert right here */
if (host->mmc->caps & MMC_CAP_NONREMOVABLE) {
if (!mmc_card_is_removable(host->mmc)) {
ret = sdhci_bcm_kona_sd_card_emulate(host, 1);
if (ret) {
dev_err(dev,
......@@ -326,7 +326,7 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
static struct platform_driver sdhci_bcm_kona_driver = {
.driver = {
.name = "sdhci-kona",
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
.of_match_table = sdhci_bcm_kona_of_match,
},
.probe = sdhci_bcm_kona_probe,
......
drivers/mmc/host/sdhci-bcm2835.c deleted 100644 → 0
View file @ 27acbec3
/*
* BCM2835 SDHCI
* Copyright (C) 2012 Stephen Warren
* Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me
* Portions of the code there were obviously based on the Linux kernel at:
* git://github.com/raspberrypi/linux.git rpi-3.6.y
* commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mmc/host.h>
#include "sdhci-pltfm.h"
/*
* 400KHz is max freq for card ID etc. Use that as min card clock. We need to
* know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY.
*/
#define MIN_FREQ 400000
/*
* The Arasan has a bugette whereby it may lose the content of successive
* writes to registers that are within two SD-card clock cycles of each other
* (a clock domain crossing problem). It seems, however, that the data
* register does not have this problem, which is just as well - otherwise we'd
* have to nobble the DMA engine too.
*
* This should probably be dynamically calculated based on the actual card
* frequency. However, this is the longest we'll have to wait, and doesn't
* seem to slow access down too much, so the added complexity doesn't seem
* worth it for now.
*
* 1/MIN_FREQ is (max) time per tick of eMMC clock.
* 2/MIN_FREQ is time for two ticks.
* Multiply by 1000000 to get uS per two ticks.
* *1000000 for uSecs.
* +1 for hack rounding.
*/
#define BCM2835_SDHCI_WRITE_DELAY (((2 * 1000000) / MIN_FREQ) + 1)
struct bcm2835_sdhci {
u32 shadow;
};
static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
{
writel(val, host->ioaddr + reg);
udelay(BCM2835_SDHCI_WRITE_DELAY);
}
static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
{
u32 val = readl(host->ioaddr + reg);
if (reg == SDHCI_CAPABILITIES)
val |= SDHCI_CAN_VDD_330;
return val;
}
static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct bcm2835_sdhci *bcm2835_host = sdhci_pltfm_priv(pltfm_host);
u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow :
bcm2835_sdhci_readl(host, reg & ~3);
u32 word_num = (reg >> 1) & 1;
u32 word_shift = word_num * 16;
u32 mask = 0xffff << word_shift;
u32 newval = (oldval & ~mask) | (val << word_shift);
if (reg == SDHCI_TRANSFER_MODE)
bcm2835_host->shadow = newval;
else
bcm2835_sdhci_writel(host, newval, reg & ~3);
}
static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
{
u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
u32 word_num = (reg >> 1) & 1;
u32 word_shift = word_num * 16;
u32 word = (val >> word_shift) & 0xffff;
return word;
}
static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
{
u32 oldval = bcm2835_sdhci_readl(host, reg & ~3);
u32 byte_num = reg & 3;
u32 byte_shift = byte_num * 8;
u32 mask = 0xff << byte_shift;
u32 newval = (oldval & ~mask) | (val << byte_shift);
bcm2835_sdhci_writel(host, newval, reg & ~3);
}
static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
{
u32 val = bcm2835_sdhci_readl(host, (reg & ~3));
u32 byte_num = reg & 3;
u32 byte_shift = byte_num * 8;
u32 byte = (val >> byte_shift) & 0xff;
return byte;
}
static unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host)
{
return MIN_FREQ;
}
static const struct sdhci_ops bcm2835_sdhci_ops = {
.write_l = bcm2835_sdhci_writel,
.write_w = bcm2835_sdhci_writew,
.write_b = bcm2835_sdhci_writeb,
.read_l = bcm2835_sdhci_readl,
.read_w = bcm2835_sdhci_readw,
.read_b = bcm2835_sdhci_readb,
.set_clock = sdhci_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.get_min_clock = bcm2835_sdhci_get_min_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
static const struct sdhci_pltfm_data bcm2835_sdhci_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
.ops = &bcm2835_sdhci_ops,
};
static int bcm2835_sdhci_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct bcm2835_sdhci *bcm2835_host;
struct sdhci_pltfm_host *pltfm_host;
int ret;
host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata,
sizeof(*bcm2835_host));
if (IS_ERR(host))
return PTR_ERR(host);
pltfm_host = sdhci_priv(host);
pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pltfm_host->clk)) {
ret = PTR_ERR(pltfm_host->clk);
goto err;
}
ret = clk_prepare_enable(pltfm_host->clk);
if (ret) {
dev_err(&pdev->dev, "failed to enable host clk\n");
goto err;
}
ret = sdhci_add_host(host);
if (ret)
goto err_clk;
return 0;
err_clk:
clk_disable_unprepare(pltfm_host->clk);
err:
sdhci_pltfm_free(pdev);
return ret;
}
static const struct of_device_id bcm2835_sdhci_of_match[] = {
{ .compatible = "brcm,bcm2835-sdhci" },
{ }
};
MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match);
static struct platform_driver bcm2835_sdhci_driver = {
.driver = {
.name = "sdhci-bcm2835",
.of_match_table = bcm2835_sdhci_of_match,
.pm = SDHCI_PLTFM_PMOPS,
},
.probe = bcm2835_sdhci_probe,
.remove = sdhci_pltfm_unregister,
};
module_platform_driver(bcm2835_sdhci_driver);
MODULE_DESCRIPTION("BCM2835 SDHCI driver");
MODULE_AUTHOR("Stephen Warren");
MODULE_LICENSE("GPL v2");
drivers/mmc/host/sdhci-brcmstb.c 0 → 100644
View file @ 07f00f06
/*
* sdhci-brcmstb.c Support for SDHCI on Broadcom BRCMSTB SoC's
*
* Copyright (C) 2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/of.h>
#include "sdhci-pltfm.h"
#ifdef CONFIG_PM_SLEEP
static int sdhci_brcmstb_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
int res;
res = sdhci_suspend_host(host);
if (res)
return res;
clk_disable_unprepare(pltfm_host->clk);
return res;
}
static int sdhci_brcmstb_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
int err;
err = clk_prepare_enable(pltfm_host->clk);
if (err)
return err;
return sdhci_resume_host(host);
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(sdhci_brcmstb_pmops, sdhci_brcmstb_suspend,
sdhci_brcmstb_resume);
static const struct sdhci_ops sdhci_brcmstb_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
static struct sdhci_pltfm_data sdhci_brcmstb_pdata = {
.ops = &sdhci_brcmstb_ops,
};
static int sdhci_brcmstb_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct clk *clk;
int res;
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "Clock not found in Device Tree\n");
clk = NULL;
}
res = clk_prepare_enable(clk);
if (res)
return res;
host = sdhci_pltfm_init(pdev, &sdhci_brcmstb_pdata, 0);
if (IS_ERR(host)) {
res = PTR_ERR(host);
goto err_clk;
}
/* Enable MMC_CAP2_HC_ERASE_SZ for better max discard calculations */
host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
sdhci_get_of_property(pdev);
mmc_of_parse(host->mmc);
/*
* Supply the existing CAPS, but clear the UHS modes. This
* will allow these modes to be specified by device tree
* properties through mmc_of_parse().
*/
host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
SDHCI_SUPPORT_DDR50);
host->quirks |= SDHCI_QUIRK_MISSING_CAPS |
SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
res = sdhci_add_host(host);
if (res)
goto err;
pltfm_host = sdhci_priv(host);
pltfm_host->clk = clk;
return res;
err:
sdhci_pltfm_free(pdev);
err_clk:
clk_disable_unprepare(clk);
return res;
}
static const struct of_device_id sdhci_brcm_of_match[] = {
{ .compatible = "brcm,bcm7425-sdhci" },
{},
};
MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
static struct platform_driver sdhci_brcmstb_driver = {
.driver = {
.name = "sdhci-brcmstb",
.owner = THIS_MODULE,
.pm = &sdhci_brcmstb_pmops,
.of_match_table = of_match_ptr(sdhci_brcm_of_match),
},
.probe = sdhci_brcmstb_probe,
.remove = sdhci_pltfm_unregister,
};
module_platform_driver(sdhci_brcmstb_driver);
MODULE_DESCRIPTION("SDHCI driver for Broadcom BRCMSTB SoCs");
MODULE_AUTHOR("Broadcom");
MODULE_LICENSE("GPL v2");
drivers/mmc/host/sdhci-cns3xxx.c
View file @ 07f00f06
......@@ -101,7 +101,7 @@ static int sdhci_cns3xxx_probe(struct platform_device *pdev)
static struct platform_driver sdhci_cns3xxx_driver = {
.driver = {
.name = "sdhci-cns3xxx",
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_cns3xxx_probe,
.remove = sdhci_pltfm_unregister,
......
drivers/mmc/host/sdhci-dove.c
View file @ 07f00f06
......@@ -117,7 +117,7 @@ MODULE_DEVICE_TABLE(of, sdhci_dove_of_match_table);
static struct platform_driver sdhci_dove_driver = {
.driver = {
.name = "sdhci-dove",
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
.of_match_table = sdhci_dove_of_match_table,
},
.probe = sdhci_dove_probe,
......
drivers/mmc/host/sdhci-esdhc-imx.c
View file @ 07f00f06
......@@ -39,11 +39,13 @@
#define ESDHC_VENDOR_SPEC_VSELECT (1 << 1)
#define ESDHC_VENDOR_SPEC_FRC_SDCLK_ON (1 << 8)
#define ESDHC_WTMK_LVL 0x44
#define ESDHC_WTMK_DEFAULT_VAL 0x10401040
#define ESDHC_MIX_CTRL 0x48
#define ESDHC_MIX_CTRL_DDREN (1 << 3)
#define ESDHC_MIX_CTRL_AC23EN (1 << 7)
#define ESDHC_MIX_CTRL_EXE_TUNE (1 << 22)
#define ESDHC_MIX_CTRL_SMPCLK_SEL (1 << 23)
#define ESDHC_MIX_CTRL_AUTO_TUNE_EN (1 << 24)
#define ESDHC_MIX_CTRL_FBCLK_SEL (1 << 25)
#define ESDHC_MIX_CTRL_HS400_EN (1 << 26)
/* Bits 3 and 6 are not SDHCI standard definitions */
......@@ -75,7 +77,8 @@
#define ESDHC_TUNING_CTRL 0xcc
#define ESDHC_STD_TUNING_EN (1 << 24)
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
#define ESDHC_TUNING_START_TAP_DEFAULT 0x1
#define ESDHC_TUNING_START_TAP_MASK 0xff
#define ESDHC_TUNING_STEP_MASK 0x00070000
#define ESDHC_TUNING_STEP_SHIFT 16
......@@ -299,7 +302,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
/* imx6q/dl does not have cap_1 register, fake one */
val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
| SDHCI_SUPPORT_SDR50
| SDHCI_USE_SDR50_TUNING;
| SDHCI_USE_SDR50_TUNING
| (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT);
if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
val |= SDHCI_SUPPORT_HS400;
......@@ -469,32 +473,29 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
if (val & SDHCI_CTRL_TUNED_CLK)
if (val & SDHCI_CTRL_TUNED_CLK) {
new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL;
else
new_val |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
} else {
new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
new_val &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
}
writel(new_val , host->ioaddr + ESDHC_MIX_CTRL);
} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR);
u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
u32 tuning_ctrl;
if (val & SDHCI_CTRL_TUNED_CLK) {
v |= ESDHC_MIX_CTRL_SMPCLK_SEL;
} else {
v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
m &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
m &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
}
if (val & SDHCI_CTRL_EXEC_TUNING) {
v |= ESDHC_MIX_CTRL_EXE_TUNE;
m |= ESDHC_MIX_CTRL_FBCLK_SEL;
tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL);
tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP;
if (imx_data->boarddata.tuning_step) {
tuning_ctrl &= ~ESDHC_TUNING_STEP_MASK;
tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT;
}
writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
m |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
} else {
v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
}
......@@ -751,6 +752,7 @@ static void esdhc_post_tuning(struct sdhci_host *host)
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg &= ~ESDHC_MIX_CTRL_EXE_TUNE;
reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
}
......@@ -838,6 +840,11 @@ static void esdhc_set_strobe_dll(struct sdhci_host *host)
u32 v;
if (host->mmc->actual_clock > ESDHC_STROBE_DLL_CLK_FREQ) {
/* disable clock before enabling strobe dll */
writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) &
~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
host->ioaddr + ESDHC_VENDOR_SPEC);
/* force a reset on strobe dll */
writel(ESDHC_STROBE_DLL_CTRL_RESET,
host->ioaddr + ESDHC_STROBE_DLL_CTRL);
......@@ -899,6 +906,8 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
m |= ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN;
writel(m, host->ioaddr + ESDHC_MIX_CTRL);
imx_data->is_ddr = 1;
/* update clock after enable DDR for strobe DLL lock */
host->ops->set_clock(host, host->clock);
esdhc_set_strobe_dll(host);
break;
}
......@@ -957,6 +966,62 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
.ops = &sdhci_esdhc_ops,
};
static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
int tmp;
if (esdhc_is_usdhc(imx_data)) {
/*
* The imx6q ROM code will change the default watermark
* level setting to something insane. Change it back here.
*/
writel(ESDHC_WTMK_DEFAULT_VAL, host->ioaddr + ESDHC_WTMK_LVL);
/*
* ROM code will change the bit burst_length_enable setting
* to zero if this usdhc is choosed to boot system. Change
* it back here, otherwise it will impact the performance a
* lot. This bit is used to enable/disable the burst length
* for the external AHB2AXI bridge, it's usefully especially
* for INCR transfer because without burst length indicator,
* the AHB2AXI bridge does not know the burst length in
* advance. And without burst length indicator, AHB INCR
* transfer can only be converted to singles on the AXI side.
*/
writel(readl(host->ioaddr + SDHCI_HOST_CONTROL)
| ESDHC_BURST_LEN_EN_INCR,
host->ioaddr + SDHCI_HOST_CONTROL);
/*
* errata ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL
* TO1.1, it's harmless for MX6SL
*/
writel(readl(host->ioaddr + 0x6c) | BIT(7),
host->ioaddr + 0x6c);
/* disable DLL_CTRL delay line settings */
writel(0x0, host->ioaddr + ESDHC_DLL_CTRL);
if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL);
tmp |= ESDHC_STD_TUNING_EN |
ESDHC_TUNING_START_TAP_DEFAULT;
if (imx_data->boarddata.tuning_start_tap) {
tmp &= ~ESDHC_TUNING_START_TAP_MASK;
tmp |= imx_data->boarddata.tuning_start_tap;
}
if (imx_data->boarddata.tuning_step) {
tmp &= ~ESDHC_TUNING_STEP_MASK;
tmp |= imx_data->boarddata.tuning_step
<< ESDHC_TUNING_STEP_SHIFT;
}
writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL);
}
}
}
#ifdef CONFIG_OF
static int
sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
......@@ -975,6 +1040,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
boarddata->wp_type = ESDHC_WP_GPIO;
of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step);
of_property_read_u32(np, "fsl,tuning-start-tap",
&boarddata->tuning_start_tap);
if (of_find_property(np, "no-1-8-v", NULL))
boarddata->support_vsel = false;
......@@ -1147,58 +1214,27 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (IS_ERR(imx_data->pins_default))
dev_warn(mmc_dev(host->mmc), "could not get default state\n");
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
if (imx_data->socdata->flags & ESDHC_FLAG_ENGCM07207)
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
| SDHCI_QUIRK_BROKEN_ADMA;
/*
* The imx6q ROM code will change the default watermark level setting
* to something insane. Change it back here.
*/
if (esdhc_is_usdhc(imx_data)) {
writel(0x10401040, host->ioaddr + ESDHC_WTMK_LVL);
host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
host->mmc->caps |= MMC_CAP_1_8V_DDR;
/*
* ROM code will change the bit burst_length_enable setting
* to zero if this usdhc is choosed to boot system. Change
* it back here, otherwise it will impact the performance a
* lot. This bit is used to enable/disable the burst length
* for the external AHB2AXI bridge, it's usefully especially
* for INCR transfer because without burst length indicator,
* the AHB2AXI bridge does not know the burst length in
* advance. And without burst length indicator, AHB INCR
* transfer can only be converted to singles on the AXI side.
*/
writel(readl(host->ioaddr + SDHCI_HOST_CONTROL)
| ESDHC_BURST_LEN_EN_INCR,
host->ioaddr + SDHCI_HOST_CONTROL);
if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
/*
* errata ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL
* TO1.1, it's harmless for MX6SL
*/
writel(readl(host->ioaddr + 0x6c) | BIT(7),
host->ioaddr + 0x6c);
/* clear tuning bits in case ROM has set it already */
writel(0x0, host->ioaddr + ESDHC_MIX_CTRL);
writel(0x0, host->ioaddr + SDHCI_ACMD12_ERR);
writel(0x0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
}
if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
sdhci_esdhc_ops.platform_execute_tuning =
esdhc_executing_tuning;
if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING)
writel(readl(host->ioaddr + ESDHC_TUNING_CTRL) |
ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP,
host->ioaddr + ESDHC_TUNING_CTRL);
if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
......@@ -1212,6 +1248,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (err)
goto disable_clk;
sdhci_esdhc_imx_hwinit(host);
err = sdhci_add_host(host);
if (err)
goto disable_clk;
......@@ -1255,6 +1293,25 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int sdhci_esdhc_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
return sdhci_suspend_host(host);
}
static int sdhci_esdhc_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
/* re-initialize hw state in case it's lost in low power mode */
sdhci_esdhc_imx_hwinit(host);
return sdhci_resume_host(host);
}
#endif
#ifdef CONFIG_PM
static int sdhci_esdhc_runtime_suspend(struct device *dev)
{
......@@ -1291,7 +1348,7 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
#endif
static const struct dev_pm_ops sdhci_esdhc_pmops = {
SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume)
SET_SYSTEM_SLEEP_PM_OPS(sdhci_esdhc_suspend, sdhci_esdhc_resume)
SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend,
sdhci_esdhc_runtime_resume, NULL)
};
......
drivers/mmc/host/sdhci-iproc.c
View file @ 07f00f06
......@@ -164,8 +164,17 @@ static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
static const struct sdhci_iproc_data iproc_data = {
.pdata = &sdhci_iproc_pltfm_data,
.caps = 0x05E90000,
.caps1 = 0x00000064,
.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
& SDHCI_MAX_BLOCK_MASK) |
SDHCI_CAN_VDD_330 |
SDHCI_CAN_VDD_180 |
SDHCI_CAN_DO_SUSPEND |
SDHCI_CAN_DO_HISPD |
SDHCI_CAN_DO_ADMA2 |
SDHCI_CAN_DO_SDMA,
.caps1 = SDHCI_DRIVER_TYPE_C |
SDHCI_DRIVER_TYPE_D |
SDHCI_SUPPORT_DDR50,
.mmc_caps = MMC_CAP_1_8V_DDR,
};
......@@ -251,7 +260,7 @@ static struct platform_driver sdhci_iproc_driver = {
.driver = {
.name = "sdhci-iproc",
.of_match_table = sdhci_iproc_of_match,
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_iproc_probe,
.remove = sdhci_pltfm_unregister,
......
drivers/mmc/host/sdhci-msm.c
View file @ 07f00f06
......@@ -32,6 +32,21 @@
#define CORE_POWER 0x0
#define CORE_SW_RST BIT(7)
#define CORE_PWRCTL_STATUS 0xdc
#define CORE_PWRCTL_MASK 0xe0
#define CORE_PWRCTL_CLEAR 0xe4
#define CORE_PWRCTL_CTL 0xe8
#define CORE_PWRCTL_BUS_OFF BIT(0)
#define CORE_PWRCTL_BUS_ON BIT(1)
#define CORE_PWRCTL_IO_LOW BIT(2)
#define CORE_PWRCTL_IO_HIGH BIT(3)
#define CORE_PWRCTL_BUS_SUCCESS BIT(0)
#define CORE_PWRCTL_IO_SUCCESS BIT(2)
#define REQ_BUS_OFF BIT(0)
#define REQ_BUS_ON BIT(1)
#define REQ_IO_LOW BIT(2)
#define REQ_IO_HIGH BIT(3)
#define INT_MASK 0xf
#define MAX_PHASES 16
#define CORE_DLL_LOCK BIT(7)
#define CORE_DLL_EN BIT(16)
......@@ -56,6 +71,7 @@
struct sdhci_msm_host {
struct platform_device *pdev;
void __iomem *core_mem; /* MSM SDCC mapped address */
int pwr_irq; /* power irq */
struct clk *clk; /* main SD/MMC bus clock */
struct clk *pclk; /* SDHC peripheral bus clock */
struct clk *bus_clk; /* SDHC bus voter clock */
......@@ -410,6 +426,85 @@ static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
return rc;
}
static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
unsigned int uhs)
{
struct mmc_host *mmc = host->mmc;
u16 ctrl_2;
ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
/* Select Bus Speed Mode for host */
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
switch (uhs) {
case MMC_TIMING_UHS_SDR12:
ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
break;
case MMC_TIMING_UHS_SDR25:
ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
break;
case MMC_TIMING_UHS_SDR50:
ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
break;
case MMC_TIMING_MMC_HS200:
case MMC_TIMING_UHS_SDR104:
ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
break;
case MMC_TIMING_UHS_DDR50:
case MMC_TIMING_MMC_DDR52:
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
break;
}
/*
* When clock frequency is less than 100MHz, the feedback clock must be
* provided and DLL must not be used so that tuning can be skipped. To
* provide feedback clock, the mode selection can be any value less
* than 3'b011 in bits [2:0] of HOST CONTROL2 register.
*/
if (host->clock <= 100000000 &&
(uhs == MMC_TIMING_MMC_HS400 ||
uhs == MMC_TIMING_MMC_HS200 ||
uhs == MMC_TIMING_UHS_SDR104))
ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
dev_dbg(mmc_dev(mmc), "%s: clock=%u uhs=%u ctrl_2=0x%x\n",
mmc_hostname(host->mmc), host->clock, uhs, ctrl_2);
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
static void sdhci_msm_voltage_switch(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
u32 irq_status, irq_ack = 0;
irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
irq_status &= INT_MASK;
writel_relaxed(irq_status, msm_host->core_mem + CORE_PWRCTL_CLEAR);
if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF))
irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
if (irq_status & (CORE_PWRCTL_IO_LOW | CORE_PWRCTL_IO_HIGH))
irq_ack |= CORE_PWRCTL_IO_SUCCESS;
/*
* The driver has to acknowledge the interrupt, switch voltages and
* report back if it succeded or not to this register. The voltage
* switches are handled by the sdhci core, so just report success.
*/
writel_relaxed(irq_ack, msm_host->core_mem + CORE_PWRCTL_CTL);
}
static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
{
struct sdhci_host *host = (struct sdhci_host *)data;
sdhci_msm_voltage_switch(host);
return IRQ_HANDLED;
}
static const struct of_device_id sdhci_msm_dt_match[] = {
{ .compatible = "qcom,sdhci-msm-v4" },
{},
......@@ -422,11 +517,13 @@ static const struct sdhci_ops sdhci_msm_ops = {
.reset = sdhci_reset,
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.set_uhs_signaling = sdhci_msm_set_uhs_signaling,
.voltage_switch = sdhci_msm_voltage_switch,
};
static const struct sdhci_pltfm_data sdhci_msm_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
SDHCI_QUIRK_NO_CARD_NO_RESET |
SDHCI_QUIRK_SINGLE_POWER_WRITE,
.ops = &sdhci_msm_ops,
};
......@@ -473,7 +570,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
if (IS_ERR(msm_host->pclk)) {
ret = PTR_ERR(msm_host->pclk);
dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
dev_err(&pdev->dev, "Peripheral clk setup failed (%d)\n", ret);
goto bus_clk_disable;
}
......@@ -545,6 +642,22 @@ static int sdhci_msm_probe(struct platform_device *pdev)
CORE_VENDOR_SPEC_CAPABILITIES0);
}
/* Setup IRQ for handling power/voltage tasks with PMIC */
msm_host->pwr_irq = platform_get_irq_byname(pdev, "pwr_irq");
if (msm_host->pwr_irq < 0) {
dev_err(&pdev->dev, "Get pwr_irq failed (%d)\n",
msm_host->pwr_irq);
goto clk_disable;
}
ret = devm_request_threaded_irq(&pdev->dev, msm_host->pwr_irq, NULL,
sdhci_msm_pwr_irq, IRQF_ONESHOT,
dev_name(&pdev->dev), host);
if (ret) {
dev_err(&pdev->dev, "Request IRQ failed (%d)\n", ret);
goto clk_disable;
}
ret = sdhci_add_host(host);
if (ret)
goto clk_disable;
......
drivers/mmc/host/sdhci-of-arasan.c
View file @ 07f00f06
This diff is collapsed.
drivers/mmc/host/sdhci-of-at91.c
View file @ 07f00f06
......@@ -288,7 +288,7 @@ static int sdhci_at91_probe(struct platform_device *pdev)
* Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries
* to enable polling via device tree with broken-cd property.
*/
if (!(host->mmc->caps & MMC_CAP_NONREMOVABLE) &&
if (mmc_card_is_removable(host->mmc) &&
mmc_gpio_get_cd(host->mmc) < 0) {
host->mmc->caps |= MMC_CAP_NEEDS_POLL;
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
......
drivers/mmc/host/sdhci-of-esdhc.c
View file @ 07f00f06
......@@ -481,7 +481,7 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask)
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static u32 esdhc_proctl;
static int esdhc_of_suspend(struct device *dev)
{
......@@ -504,16 +504,12 @@ static int esdhc_of_resume(struct device *dev)
}
return ret;
}
static const struct dev_pm_ops esdhc_pmops = {
.suspend = esdhc_of_suspend,
.resume = esdhc_of_resume,
};
#define ESDHC_PMOPS (&esdhc_pmops)
#else
#define ESDHC_PMOPS NULL
#endif
static SIMPLE_DEV_PM_OPS(esdhc_of_dev_pm_ops,
esdhc_of_suspend,
esdhc_of_resume);
static const struct sdhci_ops sdhci_esdhc_be_ops = {
.read_l = esdhc_be_readl,
.read_w = esdhc_be_readw,
......@@ -657,7 +653,7 @@ static struct platform_driver sdhci_esdhc_driver = {
.driver = {
.name = "sdhci-esdhc",
.of_match_table = sdhci_esdhc_of_match,
.pm = ESDHC_PMOPS,
.pm = &esdhc_of_dev_pm_ops,
},
.probe = sdhci_esdhc_probe,
.remove = sdhci_pltfm_unregister,
......
drivers/mmc/host/sdhci-of-hlwd.c
View file @ 07f00f06
......@@ -85,7 +85,7 @@ static struct platform_driver sdhci_hlwd_driver = {
.driver = {
.name = "sdhci-hlwd",
.of_match_table = sdhci_hlwd_of_match,
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_hlwd_probe,
.remove = sdhci_pltfm_unregister,
......
drivers/mmc/host/sdhci-pci-core.c
View file @ 07f00f06
......@@ -419,13 +419,13 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
};
/* Define Host controllers for Intel Merrifield platform */
#define INTEL_MRFL_EMMC_0 0
#define INTEL_MRFL_EMMC_1 1
#define INTEL_MRFLD_EMMC_0 0
#define INTEL_MRFLD_EMMC_1 1
static int intel_mrfl_mmc_probe_slot(struct sdhci_pci_slot *slot)
static int intel_mrfld_mmc_probe_slot(struct sdhci_pci_slot *slot)
{
if ((PCI_FUNC(slot->chip->pdev->devfn) != INTEL_MRFL_EMMC_0) &&
(PCI_FUNC(slot->chip->pdev->devfn) != INTEL_MRFL_EMMC_1))
if ((PCI_FUNC(slot->chip->pdev->devfn) != INTEL_MRFLD_EMMC_0) &&
(PCI_FUNC(slot->chip->pdev->devfn) != INTEL_MRFLD_EMMC_1))
/* SD support is not ready yet */
return -ENODEV;
......@@ -435,12 +435,12 @@ static int intel_mrfl_mmc_probe_slot(struct sdhci_pci_slot *slot)
return 0;
}
static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = {
static const struct sdhci_pci_fixes sdhci_intel_mrfld_mmc = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_BROKEN_HS200 |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.allow_runtime_pm = true,
.probe_slot = intel_mrfl_mmc_probe_slot,
.probe_slot = intel_mrfld_mmc_probe_slot,
};
/* O2Micro extra registers */
......@@ -1104,10 +1104,10 @@ static const struct pci_device_id pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_MRFL_MMC,
.device = PCI_DEVICE_ID_INTEL_MRFLD_MMC,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_intel_mrfl_mmc,
.driver_data = (kernel_ulong_t)&sdhci_intel_mrfld_mmc,
},
{
......@@ -1413,8 +1413,7 @@ static const struct sdhci_ops sdhci_pci_ops = {
* *
\*****************************************************************************/
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int sdhci_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
......@@ -1496,7 +1495,9 @@ static int sdhci_pci_resume(struct device *dev)
return 0;
}
#endif
#ifdef CONFIG_PM
static int sdhci_pci_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
......@@ -1562,17 +1563,10 @@ static int sdhci_pci_runtime_resume(struct device *dev)
return 0;
}
#else /* CONFIG_PM */
#define sdhci_pci_suspend NULL
#define sdhci_pci_resume NULL
#endif /* CONFIG_PM */
#endif
static const struct dev_pm_ops sdhci_pci_pm_ops = {
.suspend = sdhci_pci_suspend,
.resume = sdhci_pci_resume,
SET_SYSTEM_SLEEP_PM_OPS(sdhci_pci_suspend, sdhci_pci_resume)
SET_RUNTIME_PM_OPS(sdhci_pci_runtime_suspend,
sdhci_pci_runtime_resume, NULL)
};
......@@ -1760,11 +1754,12 @@ static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot)
static void sdhci_pci_runtime_pm_allow(struct device *dev)
{
pm_runtime_put_noidle(dev);
pm_runtime_allow(dev);
pm_suspend_ignore_children(dev, 1);
pm_runtime_set_autosuspend_delay(dev, 50);
pm_runtime_use_autosuspend(dev);
pm_suspend_ignore_children(dev, 1);
pm_runtime_allow(dev);
/* Stay active until mmc core scans for a card */
pm_runtime_put_noidle(dev);
}
static void sdhci_pci_runtime_pm_forbid(struct device *dev)
......@@ -1810,15 +1805,13 @@ static int sdhci_pci_probe(struct pci_dev *pdev,
return -ENODEV;
}
ret = pci_enable_device(pdev);
ret = pcim_enable_device(pdev);
if (ret)
return ret;
chip = kzalloc(sizeof(struct sdhci_pci_chip), GFP_KERNEL);
if (!chip) {
ret = -ENOMEM;
goto err;
}
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->pdev = pdev;
chip->fixes = (const struct sdhci_pci_fixes *)ent->driver_data;
......@@ -1834,7 +1827,7 @@ static int sdhci_pci_probe(struct pci_dev *pdev,
if (chip->fixes && chip->fixes->probe) {
ret = chip->fixes->probe(chip);
if (ret)
goto free;
return ret;
}
slots = chip->num_slots; /* Quirk may have changed this */
......@@ -1844,8 +1837,7 @@ static int sdhci_pci_probe(struct pci_dev *pdev,
if (IS_ERR(slot)) {
for (i--; i >= 0; i--)
sdhci_pci_remove_slot(chip->slots[i]);
ret = PTR_ERR(slot);
goto free;
return PTR_ERR(slot);
}
chip->slots[i] = slot;
......@@ -1855,35 +1847,18 @@ static int sdhci_pci_probe(struct pci_dev *pdev,
sdhci_pci_runtime_pm_allow(&pdev->dev);
return 0;
free:
pci_set_drvdata(pdev, NULL);
kfree(chip);
err:
pci_disable_device(pdev);
return ret;
}
static void sdhci_pci_remove(struct pci_dev *pdev)
{
int i;
struct sdhci_pci_chip *chip;
chip = pci_get_drvdata(pdev);
struct sdhci_pci_chip *chip = pci_get_drvdata(pdev);
if (chip) {
if (chip->allow_runtime_pm)
sdhci_pci_runtime_pm_forbid(&pdev->dev);
for (i = 0; i < chip->num_slots; i++)
sdhci_pci_remove_slot(chip->slots[i]);
pci_set_drvdata(pdev, NULL);
kfree(chip);
}
pci_disable_device(pdev);
}
static struct pci_driver sdhci_driver = {
......
drivers/mmc/host/sdhci-pci.h
View file @ 07f00f06
......@@ -14,7 +14,7 @@
#define PCI_DEVICE_ID_INTEL_BSW_EMMC 0x2294
#define PCI_DEVICE_ID_INTEL_BSW_SDIO 0x2295
#define PCI_DEVICE_ID_INTEL_BSW_SD 0x2296
#define PCI_DEVICE_ID_INTEL_MRFL_MMC 0x1190
#define PCI_DEVICE_ID_INTEL_MRFLD_MMC 0x1190
#define PCI_DEVICE_ID_INTEL_CLV_SDIO0 0x08f9
#define PCI_DEVICE_ID_INTEL_CLV_SDIO1 0x08fa
#define PCI_DEVICE_ID_INTEL_CLV_SDIO2 0x08fb
......
drivers/mmc/host/sdhci-pltfm.c
View file @ 07f00f06
......@@ -215,29 +215,26 @@ int sdhci_pltfm_unregister(struct platform_device *pdev)
}
EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister);
#ifdef CONFIG_PM
int sdhci_pltfm_suspend(struct device *dev)
#ifdef CONFIG_PM_SLEEP
static int sdhci_pltfm_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
return sdhci_suspend_host(host);
}
EXPORT_SYMBOL_GPL(sdhci_pltfm_suspend);
int sdhci_pltfm_resume(struct device *dev)
static int sdhci_pltfm_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
return sdhci_resume_host(host);
}
EXPORT_SYMBOL_GPL(sdhci_pltfm_resume);
#endif
const struct dev_pm_ops sdhci_pltfm_pmops = {
.suspend = sdhci_pltfm_suspend,
.resume = sdhci_pltfm_resume,
SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume)
};
EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops);
#endif /* CONFIG_PM */
static int __init sdhci_pltfm_drv_init(void)
{
......
drivers/mmc/host/sdhci-pltfm.h
View file @ 07f00f06
......@@ -109,13 +109,6 @@ static inline void *sdhci_pltfm_priv(struct sdhci_pltfm_host *host)
return (void *)host->private;
}
#ifdef CONFIG_PM
extern int sdhci_pltfm_suspend(struct device *dev);
extern int sdhci_pltfm_resume(struct device *dev);
extern const struct dev_pm_ops sdhci_pltfm_pmops;
#define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops)
#else
#define SDHCI_PLTFM_PMOPS NULL
#endif
#endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */
drivers/mmc/host/sdhci-pxav2.c
View file @ 07f00f06
......@@ -252,7 +252,7 @@ static struct platform_driver sdhci_pxav2_driver = {
.driver = {
.name = "sdhci-pxav2",
.of_match_table = of_match_ptr(sdhci_pxav2_of_match),
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_pxav2_probe,
.remove = sdhci_pxav2_remove,
......
drivers/mmc/host/sdhci-pxav3.c
View file @ 07f00f06
......@@ -583,24 +583,17 @@ static int sdhci_pxav3_runtime_resume(struct device *dev)
}
#endif
#ifdef CONFIG_PM
static const struct dev_pm_ops sdhci_pxav3_pmops = {
SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume)
SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend,
sdhci_pxav3_runtime_resume, NULL)
};
#define SDHCI_PXAV3_PMOPS (&sdhci_pxav3_pmops)
#else
#define SDHCI_PXAV3_PMOPS NULL
#endif
static struct platform_driver sdhci_pxav3_driver = {
.driver = {
.name = "sdhci-pxav3",
.of_match_table = of_match_ptr(sdhci_pxav3_of_match),
.pm = SDHCI_PXAV3_PMOPS,
.pm = &sdhci_pxav3_pmops,
},
.probe = sdhci_pxav3_probe,
.remove = sdhci_pxav3_remove,
......
drivers/mmc/host/sdhci-s3c.c
View file @ 07f00f06
......@@ -714,19 +714,12 @@ static int sdhci_s3c_runtime_resume(struct device *dev)
}
#endif
#ifdef CONFIG_PM
static const struct dev_pm_ops sdhci_s3c_pmops = {
SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
NULL)
};
#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops)
#else
#define SDHCI_S3C_PMOPS NULL
#endif
#if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
.no_divider = true,
......@@ -765,7 +758,7 @@ static struct platform_driver sdhci_s3c_driver = {
.driver = {
.name = "s3c-sdhci",
.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
.pm = SDHCI_S3C_PMOPS,
.pm = &sdhci_s3c_pmops,
},
};
......
drivers/mmc/host/sdhci-sirf.c
View file @ 07f00f06
......@@ -260,9 +260,9 @@ static int sdhci_sirf_resume(struct device *dev)
return sdhci_resume_host(host);
}
#endif
static SIMPLE_DEV_PM_OPS(sdhci_sirf_pm_ops, sdhci_sirf_suspend, sdhci_sirf_resume);
#endif
static const struct of_device_id sdhci_sirf_of_match[] = {
{ .compatible = "sirf,prima2-sdhc" },
......@@ -274,9 +274,7 @@ static struct platform_driver sdhci_sirf_driver = {
.driver = {
.name = "sdhci-sirf",
.of_match_table = sdhci_sirf_of_match,
#ifdef CONFIG_PM_SLEEP
.pm = &sdhci_sirf_pm_ops,
#endif
},
.probe = sdhci_sirf_probe,
.remove = sdhci_pltfm_unregister,
......
drivers/mmc/host/sdhci-st.c
View file @ 07f00f06
......@@ -183,7 +183,7 @@ static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host)
writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2);
if (mhost->caps & MMC_CAP_NONREMOVABLE)
if (!mmc_card_is_removable(mhost))
cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE;
else
/* CARD _D ET_CTRL */
......
drivers/mmc/host/sdhci-tegra.c
View file @ 07f00f06
......@@ -148,28 +148,37 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
return;
misc_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
misc_ctrl &= ~(SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 |
SDHCI_MISC_CTRL_ENABLE_SDR50 |
SDHCI_MISC_CTRL_ENABLE_DDR50 |
SDHCI_MISC_CTRL_ENABLE_SDR104);
clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE;
/*
* If the board does not define a regulator for the SDHCI
* IO voltage, then don't advertise support for UHS modes
* even if the device supports it because the IO voltage
* cannot be configured.
*/
if (!IS_ERR(host->mmc->supply.vqmmc)) {
/* Erratum: Enable SDHCI spec v3.00 support */
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300;
/* Advertise UHS modes as supported by host */
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR50;
else
misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR50;
if (soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50;
else
misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_DDR50;
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104;
else
misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR104;
sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE;
if (soc_data->nvquirks & SDHCI_MISC_CTRL_ENABLE_SDR50)
clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE;
}
sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
......@@ -474,7 +483,7 @@ static struct platform_driver sdhci_tegra_driver = {
.driver = {
.name = "sdhci-tegra",
.of_match_table = sdhci_tegra_dt_match,
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_tegra_probe,
.remove = sdhci_pltfm_unregister,
......
drivers/mmc/host/sdhci.c
View file @ 07f00f06
This diff is collapsed.
drivers/mmc/host/sdhci.h
View file @ 07f00f06
......@@ -128,6 +128,7 @@
#define SDHCI_INT_CARD_INSERT 0x00000040
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
#define SDHCI_INT_RETUNE 0x00001000
#define SDHCI_INT_ERROR 0x00008000
#define SDHCI_INT_TIMEOUT 0x00010000
#define SDHCI_INT_CRC 0x00020000
......@@ -186,6 +187,7 @@
#define SDHCI_CAN_DO_ADMA1 0x00100000
#define SDHCI_CAN_DO_HISPD 0x00200000
#define SDHCI_CAN_DO_SDMA 0x00400000
#define SDHCI_CAN_DO_SUSPEND 0x00800000
#define SDHCI_CAN_VDD_330 0x01000000
#define SDHCI_CAN_VDD_300 0x02000000
#define SDHCI_CAN_VDD_180 0x04000000
......@@ -314,6 +316,9 @@ struct sdhci_adma2_64_desc {
*/
#define SDHCI_MAX_SEGS 128
/* Allow for a a command request and a data request at the same time */
#define SDHCI_MAX_MRQS 2
enum sdhci_cookie {
COOKIE_UNMAPPED,
COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */
......@@ -447,6 +452,9 @@ struct sdhci_host {
#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */
#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */
#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */
unsigned int version; /* SDHCI spec. version */
......@@ -460,12 +468,13 @@ struct sdhci_host {
bool runtime_suspended; /* Host is runtime suspended */
bool bus_on; /* Bus power prevents runtime suspend */
bool preset_enabled; /* Preset is enabled */
bool pending_reset; /* Cmd/data reset is pending */
struct mmc_request *mrq; /* Current request */
struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */
struct mmc_command *cmd; /* Current command */
struct mmc_command *data_cmd; /* Current data command */
struct mmc_data *data; /* Current data request */
unsigned int data_early:1; /* Data finished before cmd */
unsigned int busy_handle:1; /* Handling the order of Busy-end */
struct sg_mapping_iter sg_miter; /* SG state for PIO */
unsigned int blocks; /* remaining PIO blocks */
......@@ -486,9 +495,11 @@ struct sdhci_host {
struct tasklet_struct finish_tasklet; /* Tasklet structures */
struct timer_list timer; /* Timer for timeouts */
struct timer_list data_timer; /* Timer for data timeouts */
u32 caps; /* Alternative CAPABILITY_0 */
u32 caps1; /* Alternative CAPABILITY_1 */
u32 caps; /* CAPABILITY_0 */
u32 caps1; /* CAPABILITY_1 */
bool read_caps; /* Capability flags have been read */
unsigned int ocr_avail_sdio; /* OCR bit masks */
unsigned int ocr_avail_sd;
......@@ -508,6 +519,8 @@ struct sdhci_host {
unsigned int tuning_count; /* Timer count for re-tuning */
unsigned int tuning_mode; /* Re-tuning mode supported by host */
#define SDHCI_TUNING_MODE_1 0
#define SDHCI_TUNING_MODE_2 1
#define SDHCI_TUNING_MODE_3 2
unsigned long private[0] ____cacheline_aligned;
};
......@@ -645,11 +658,20 @@ static inline void *sdhci_priv(struct sdhci_host *host)
}
extern void sdhci_card_detect(struct sdhci_host *host);
extern void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps,
u32 *caps1);
extern int sdhci_setup_host(struct sdhci_host *host);
extern int __sdhci_add_host(struct sdhci_host *host);
extern int sdhci_add_host(struct sdhci_host *host);
extern void sdhci_remove_host(struct sdhci_host *host, int dead);
extern void sdhci_send_command(struct sdhci_host *host,
struct mmc_command *cmd);
static inline void sdhci_read_caps(struct sdhci_host *host)
{
__sdhci_read_caps(host, NULL, NULL, NULL);
}
static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host)
{
return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED);
......
drivers/mmc/host/sdhci_f_sdh30.c
View file @ 07f00f06
......@@ -222,7 +222,7 @@ static struct platform_driver sdhci_f_sdh30_driver = {
.driver = {
.name = "f_sdh30",
.of_match_table = f_sdh30_dt_ids,
.pm = SDHCI_PLTFM_PMOPS,
.pm = &sdhci_pltfm_pmops,
},
.probe = sdhci_f_sdh30_probe,
.remove = sdhci_f_sdh30_remove,
......
drivers/mmc/host/sh_mmcif.c
View file @ 07f00f06
......@@ -574,7 +574,7 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
if (state1 & STS1_CMDSEQ) {
sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK);
sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, ~CMD_CTRL_BREAK);
for (timeout = 10000000; timeout; timeout--) {
for (timeout = 10000; timeout; timeout--) {
if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1)
& STS1_CMDSEQ))
break;
......@@ -819,10 +819,12 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
tmp |= CMD_SET_RTYP_NO;
break;
case MMC_RSP_R1:
case MMC_RSP_R1B:
case MMC_RSP_R3:
tmp |= CMD_SET_RTYP_6B;
break;
case MMC_RSP_R1B:
tmp |= CMD_SET_RBSY | CMD_SET_RTYP_6B;
break;
case MMC_RSP_R2:
tmp |= CMD_SET_RTYP_17B;
break;
......@@ -830,17 +832,7 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
dev_err(dev, "Unsupported response type.\n");
break;
}
switch (opc) {
/* RBSY */
case MMC_SLEEP_AWAKE:
case MMC_SWITCH:
case MMC_STOP_TRANSMISSION:
case MMC_SET_WRITE_PROT:
case MMC_CLR_WRITE_PROT:
case MMC_ERASE:
tmp |= CMD_SET_RBSY;
break;
}
/* WDAT / DATW */
if (data) {
tmp |= CMD_SET_WDAT;
......@@ -925,23 +917,13 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
{
struct mmc_command *cmd = mrq->cmd;
u32 opc = cmd->opcode;
u32 mask;
u32 mask = 0;
unsigned long flags;
switch (opc) {
/* response busy check */
case MMC_SLEEP_AWAKE:
case MMC_SWITCH:
case MMC_STOP_TRANSMISSION:
case MMC_SET_WRITE_PROT:
case MMC_CLR_WRITE_PROT:
case MMC_ERASE:
if (cmd->flags & MMC_RSP_BUSY)
mask = MASK_START_CMD | MASK_MRBSYE;
break;
default:
else
mask = MASK_START_CMD | MASK_MCRSPE;
break;
}
if (host->ccs_enable)
mask |= MASK_MCCSTO;
......@@ -1009,22 +991,6 @@ static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->state = STATE_REQUEST;
spin_unlock_irqrestore(&host->lock, flags);
switch (mrq->cmd->opcode) {
/* MMCIF does not support SD/SDIO command */
case MMC_SLEEP_AWAKE: /* = SD_IO_SEND_OP_COND (5) */
case MMC_SEND_EXT_CSD: /* = SD_SEND_IF_COND (8) */
if ((mrq->cmd->flags & MMC_CMD_MASK) != MMC_CMD_BCR)
break;
case MMC_APP_CMD:
case SD_IO_RW_DIRECT:
host->state = STATE_IDLE;
mrq->cmd->error = -ETIMEDOUT;
mmc_request_done(mmc, mrq);
return;
default:
break;
}
host->mrq = mrq;
sh_mmcif_start_cmd(host, mrq);
......@@ -1488,6 +1454,9 @@ static int sh_mmcif_probe(struct platform_device *pdev)
sh_mmcif_init_ocr(host);
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY;
mmc->caps2 |= MMC_CAP2_NO_SD | MMC_CAP2_NO_SDIO;
mmc->max_busy_timeout = 10000;
if (pd && pd->caps)
mmc->caps |= pd->caps;
mmc->max_segs = 32;
......
drivers/mmc/host/sh_mobile_sdhi.c
View file @ 07f00f06
......@@ -39,6 +39,12 @@
#define EXT_ACC 0xe4
#define SDHI_VER_GEN2_SDR50 0x490c
/* very old datasheets said 0x490c for SDR104, too. They are wrong! */
#define SDHI_VER_GEN2_SDR104 0xcb0d
#define SDHI_VER_GEN3_SD 0xcc10
#define SDHI_VER_GEN3_SDMMC 0xcd10
#define host_to_priv(host) container_of((host)->pdata, struct sh_mobile_sdhi, mmc_data)
struct sh_mobile_sdhi_of_data {
......@@ -109,14 +115,14 @@ static void sh_mobile_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width)
* sh_mobile_sdhi_of_data :: dma_buswidth
*/
switch (sd_ctrl_read16(host, CTL_VERSION)) {
case 0x490C:
case SDHI_VER_GEN2_SDR50:
val = (width == 32) ? 0x0001 : 0x0000;
break;
case 0xCB0D:
case SDHI_VER_GEN2_SDR104:
val = (width == 32) ? 0x0000 : 0x0001;
break;
case 0xCC10: /* Gen3, SD only */
case 0xCD10: /* Gen3, SD + MMC */
case SDHI_VER_GEN3_SD:
case SDHI_VER_GEN3_SDMMC:
if (width == 64)
val = 0x0000;
else if (width == 32)
......
drivers/mmc/host/tmio_mmc.h
View file @ 07f00f06
......@@ -259,7 +259,7 @@ static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
static inline void sd_ctrl_write32_as_16_and_16(struct tmio_mmc_host *host, int addr, u32 val)
{
writew(val, host->ctl + (addr << host->bus_shift));
writew(val & 0xffff, host->ctl + (addr << host->bus_shift));
writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
}
......
drivers/mmc/host/tmio_mmc_pio.c
View file @ 07f00f06
......@@ -1086,7 +1086,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host,
_host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
mmc->caps & MMC_CAP_NEEDS_POLL ||
mmc->caps & MMC_CAP_NONREMOVABLE ||
!mmc_card_is_removable(mmc) ||
mmc->slot.cd_irq >= 0);
if (tmio_mmc_clk_enable(_host) < 0) {
......
drivers/phy/phy-rockchip-emmc.c
View file @ 07f00f06
This diff is collapsed.
include/linux/mmc/card.h
View file @ 07f00f06
......@@ -95,6 +95,7 @@ struct mmc_ext_csd {
u8 raw_partition_support; /* 160 */
u8 raw_rpmb_size_mult; /* 168 */
u8 raw_erased_mem_count; /* 181 */
u8 strobe_support; /* 184 */
u8 raw_ext_csd_structure; /* 194 */
u8 raw_card_type; /* 196 */
u8 raw_driver_strength; /* 197 */
......@@ -279,6 +280,7 @@ struct mmc_card {
#define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10) /* Skip secure for erase/trim */
#define MMC_QUIRK_BROKEN_IRQ_POLLING (1<<11) /* Polling SDIO_CCCR_INTx could create a fake interrupt */
#define MMC_QUIRK_TRIM_BROKEN (1<<12) /* Skip trim */
#define MMC_QUIRK_BROKEN_HPI (1<<13) /* Disable broken HPI support */
unsigned int erase_size; /* erase size in sectors */
......@@ -353,6 +355,9 @@ struct mmc_fixup {
/* SDIO-specfic fields. You can use SDIO_ANY_ID here of course */
u16 cis_vendor, cis_device;
/* for MMC cards */
unsigned int ext_csd_rev;
void (*vendor_fixup)(struct mmc_card *card, int data);
int data;
};
......@@ -361,11 +366,20 @@ struct mmc_fixup {
#define CID_OEMID_ANY ((unsigned short) -1)
#define CID_NAME_ANY (NULL)
#define EXT_CSD_REV_ANY (-1u)
#define CID_MANFID_SANDISK 0x2
#define CID_MANFID_TOSHIBA 0x11
#define CID_MANFID_MICRON 0x13
#define CID_MANFID_SAMSUNG 0x15
#define CID_MANFID_KINGSTON 0x70
#define CID_MANFID_HYNIX 0x90
#define END_FIXUP { NULL }
#define _FIXUP_EXT(_name, _manfid, _oemid, _rev_start, _rev_end, \
_cis_vendor, _cis_device, \
_fixup, _data) \
_fixup, _data, _ext_csd_rev) \
{ \
.name = (_name), \
.manfid = (_manfid), \
......@@ -376,23 +390,30 @@ struct mmc_fixup {
.cis_device = (_cis_device), \
.vendor_fixup = (_fixup), \
.data = (_data), \
.ext_csd_rev = (_ext_csd_rev), \
}
#define MMC_FIXUP_REV(_name, _manfid, _oemid, _rev_start, _rev_end, \
_fixup, _data) \
_fixup, _data, _ext_csd_rev) \
_FIXUP_EXT(_name, _manfid, \
_oemid, _rev_start, _rev_end, \
SDIO_ANY_ID, SDIO_ANY_ID, \
_fixup, _data) \
_fixup, _data, _ext_csd_rev) \
#define MMC_FIXUP(_name, _manfid, _oemid, _fixup, _data) \
MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data)
MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data, \
EXT_CSD_REV_ANY)
#define MMC_FIXUP_EXT_CSD_REV(_name, _manfid, _oemid, _fixup, _data, \
_ext_csd_rev) \
MMC_FIXUP_REV(_name, _manfid, _oemid, 0, -1ull, _fixup, _data, \
_ext_csd_rev)
#define SDIO_FIXUP(_vendor, _device, _fixup, _data) \
_FIXUP_EXT(CID_NAME_ANY, CID_MANFID_ANY, \
CID_OEMID_ANY, 0, -1ull, \
_vendor, _device, \
_fixup, _data) \
_fixup, _data, EXT_CSD_REV_ANY) \
#define cid_rev(hwrev, fwrev, year, month) \
(((u64) hwrev) << 40 | \
......@@ -511,6 +532,11 @@ static inline int mmc_card_broken_irq_polling(const struct mmc_card *c)
return c->quirks & MMC_QUIRK_BROKEN_IRQ_POLLING;
}
static inline int mmc_card_broken_hpi(const struct mmc_card *c)
{
return c->quirks & MMC_QUIRK_BROKEN_HPI;
}
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
......
include/linux/mmc/dw_mmc.h
View file @ 07f00f06
......@@ -112,7 +112,6 @@ struct dw_mci_dma_slave {
* @part_buf: Simple buffer for partial fifo reads/writes.
* @push_data: Pointer to FIFO push function.
* @pull_data: Pointer to FIFO pull function.
* @quirks: Set of quirks that apply to specific versions of the IP.
* @vqmmc_enabled: Status of vqmmc, should be true or false.
* @irq_flags: The flags to be passed to request_irq.
* @irq: The irq value to be passed to request_irq.
......@@ -218,9 +217,6 @@ struct dw_mci {
void (*push_data)(struct dw_mci *host, void *buf, int cnt);
void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
/* Workaround flags */
u32 quirks;
bool vqmmc_enabled;
unsigned long irq_flags; /* IRQ flags */
int irq;
......@@ -242,17 +238,12 @@ struct dw_mci_dma_ops {
void (*exit)(struct dw_mci *host);
};
/* IP Quirks/flags. */
/* Timer for broken data transfer over scheme */
#define DW_MCI_QUIRK_BROKEN_DTO BIT(0)
struct dma_pdata;
/* Board platform data */
struct dw_mci_board {
u32 num_slots;
u32 quirks; /* Workaround / Quirk flags */
unsigned int bus_hz; /* Clock speed at the cclk_in pad */
u32 caps; /* Capabilities */
......
include/linux/mmc/host.h
View file @ 07f00f06
......@@ -19,6 +19,7 @@
#include <linux/mmc/core.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/pm.h>
struct mmc_ios {
......@@ -77,6 +78,8 @@ struct mmc_ios {
#define MMC_SET_DRIVER_TYPE_A 1
#define MMC_SET_DRIVER_TYPE_C 2
#define MMC_SET_DRIVER_TYPE_D 3
bool enhanced_strobe; /* hs400es selection */
};
struct mmc_host_ops {
......@@ -143,6 +146,9 @@ struct mmc_host_ops {
/* Prepare HS400 target operating frequency depending host driver */
int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios);
/* Prepare enhanced strobe depending host driver */
void (*hs400_enhanced_strobe)(struct mmc_host *host,
struct mmc_ios *ios);
int (*select_drive_strength)(struct mmc_card *card,
unsigned int max_dtr, int host_drv,
int card_drv, int *drv_type);
......@@ -302,6 +308,9 @@ struct mmc_host {
#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
#define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */
#define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */
#define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */
#define MMC_CAP2_NO_SD (1 << 21) /* Do not send SD commands during initialization */
#define MMC_CAP2_NO_MMC (1 << 22) /* Do not send (e)MMC commands during initialization */
mmc_pm_flag_t pm_caps; /* supported pm features */
......@@ -513,6 +522,11 @@ static inline bool mmc_card_hs400(struct mmc_card *card)
return card->host->ios.timing == MMC_TIMING_MMC_HS400;
}
static inline bool mmc_card_hs400es(struct mmc_card *card)
{
return card->host->ios.enhanced_strobe;
}
void mmc_retune_timer_stop(struct mmc_host *host);
static inline void mmc_retune_needed(struct mmc_host *host)
......
include/linux/mmc/mmc.h
View file @ 07f00f06
......@@ -297,6 +297,7 @@ struct _mmc_csd {
#define EXT_CSD_PART_CONFIG 179 /* R/W */
#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_STROBE_SUPPORT 184 /* RO */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_POWER_CLASS 187 /* R/W */
#define EXT_CSD_REV 192 /* RO */
......@@ -380,12 +381,14 @@ struct _mmc_csd {
#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */
#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
EXT_CSD_CARD_TYPE_HS400_1_2V)
#define EXT_CSD_CARD_TYPE_HS400ES (1<<8) /* Card can run at HS400ES */
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */
#define EXT_CSD_TIMING_BC 0 /* Backwards compatility */
#define EXT_CSD_TIMING_HS 1 /* High speed */
......
include/linux/platform_data/mmc-esdhc-imx.h
View file @ 07f00f06
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7