Commit 0807c500 authored by Li Yang's avatar Li Yang Committed by Greg Kroah-Hartman

USB: add Freescale USB OTG Transceiver driver

Slightly reworked and cleaned up driver from Freescale LTIB
for MPC5121E. The driver has been ported to the current kernel,
proc interface "/proc/driver/fsl_usb2_otg" has been replaced by
sysfs interface.
Signed-off-by: default avatarLi Yang <leoli@freescale.com>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 2ea6698d
......@@ -122,4 +122,12 @@ config AB8500_USB
This transceiver supports high and full speed devices plus,
in host mode, low speed.
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2
select USB_OTG
select USB_OTG_UTILS
help
Enable this to support Freescale USB OTG transceiver.
endif # USB || OTG
......@@ -19,3 +19,5 @@ obj-$(CONFIG_USB_ULPI) += ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o
obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o
obj-$(CONFIG_AB8500_USB) += ab8500-usb.o
fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o
obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o
This diff is collapsed.
This diff is collapsed.
/*
* OTG Finite State Machine from OTG spec
*
* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
*
* Author: Li Yang <LeoLi@freescale.com>
* Jerry Huang <Chang-Ming.Huang@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/usb.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
#include <linux/types.h>
#include "otg_fsm.h"
/* Change USB protocol when there is a protocol change */
static int otg_set_protocol(struct otg_fsm *fsm, int protocol)
{
int ret = 0;
if (fsm->protocol != protocol) {
VDBG("Changing role fsm->protocol= %d; new protocol= %d\n",
fsm->protocol, protocol);
/* stop old protocol */
if (fsm->protocol == PROTO_HOST)
ret = fsm->ops->start_host(fsm, 0);
else if (fsm->protocol == PROTO_GADGET)
ret = fsm->ops->start_gadget(fsm, 0);
if (ret)
return ret;
/* start new protocol */
if (protocol == PROTO_HOST)
ret = fsm->ops->start_host(fsm, 1);
else if (protocol == PROTO_GADGET)
ret = fsm->ops->start_gadget(fsm, 1);
if (ret)
return ret;
fsm->protocol = protocol;
return 0;
}
return 0;
}
static int state_changed;
/* Called when leaving a state. Do state clean up jobs here */
void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state)
{
switch (old_state) {
case OTG_STATE_B_IDLE:
otg_del_timer(fsm, b_se0_srp_tmr);
fsm->b_se0_srp = 0;
break;
case OTG_STATE_B_SRP_INIT:
fsm->b_srp_done = 0;
break;
case OTG_STATE_B_PERIPHERAL:
break;
case OTG_STATE_B_WAIT_ACON:
otg_del_timer(fsm, b_ase0_brst_tmr);
fsm->b_ase0_brst_tmout = 0;
break;
case OTG_STATE_B_HOST:
break;
case OTG_STATE_A_IDLE:
break;
case OTG_STATE_A_WAIT_VRISE:
otg_del_timer(fsm, a_wait_vrise_tmr);
fsm->a_wait_vrise_tmout = 0;
break;
case OTG_STATE_A_WAIT_BCON:
otg_del_timer(fsm, a_wait_bcon_tmr);
fsm->a_wait_bcon_tmout = 0;
break;
case OTG_STATE_A_HOST:
otg_del_timer(fsm, a_wait_enum_tmr);
break;
case OTG_STATE_A_SUSPEND:
otg_del_timer(fsm, a_aidl_bdis_tmr);
fsm->a_aidl_bdis_tmout = 0;
fsm->a_suspend_req = 0;
break;
case OTG_STATE_A_PERIPHERAL:
break;
case OTG_STATE_A_WAIT_VFALL:
otg_del_timer(fsm, a_wait_vrise_tmr);
break;
case OTG_STATE_A_VBUS_ERR:
break;
default:
break;
}
}
/* Called when entering a state */
int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state)
{
state_changed = 1;
if (fsm->transceiver->state == new_state)
return 0;
VDBG("Set state: %s\n", otg_state_string(new_state));
otg_leave_state(fsm, fsm->transceiver->state);
switch (new_state) {
case OTG_STATE_B_IDLE:
otg_drv_vbus(fsm, 0);
otg_chrg_vbus(fsm, 0);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_UNDEF);
otg_add_timer(fsm, b_se0_srp_tmr);
break;
case OTG_STATE_B_SRP_INIT:
otg_start_pulse(fsm);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_UNDEF);
otg_add_timer(fsm, b_srp_fail_tmr);
break;
case OTG_STATE_B_PERIPHERAL:
otg_chrg_vbus(fsm, 0);
otg_loc_conn(fsm, 1);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_GADGET);
break;
case OTG_STATE_B_WAIT_ACON:
otg_chrg_vbus(fsm, 0);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_HOST);
otg_add_timer(fsm, b_ase0_brst_tmr);
fsm->a_bus_suspend = 0;
break;
case OTG_STATE_B_HOST:
otg_chrg_vbus(fsm, 0);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 1);
otg_set_protocol(fsm, PROTO_HOST);
usb_bus_start_enum(fsm->transceiver->host,
fsm->transceiver->host->otg_port);
break;
case OTG_STATE_A_IDLE:
otg_drv_vbus(fsm, 0);
otg_chrg_vbus(fsm, 0);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_HOST);
break;
case OTG_STATE_A_WAIT_VRISE:
otg_drv_vbus(fsm, 1);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_HOST);
otg_add_timer(fsm, a_wait_vrise_tmr);
break;
case OTG_STATE_A_WAIT_BCON:
otg_drv_vbus(fsm, 1);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_HOST);
otg_add_timer(fsm, a_wait_bcon_tmr);
break;
case OTG_STATE_A_HOST:
otg_drv_vbus(fsm, 1);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 1);
otg_set_protocol(fsm, PROTO_HOST);
/*
* When HNP is triggered while a_bus_req = 0, a_host will
* suspend too fast to complete a_set_b_hnp_en
*/
if (!fsm->a_bus_req || fsm->a_suspend_req)
otg_add_timer(fsm, a_wait_enum_tmr);
break;
case OTG_STATE_A_SUSPEND:
otg_drv_vbus(fsm, 1);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_HOST);
otg_add_timer(fsm, a_aidl_bdis_tmr);
break;
case OTG_STATE_A_PERIPHERAL:
otg_loc_conn(fsm, 1);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_GADGET);
otg_drv_vbus(fsm, 1);
break;
case OTG_STATE_A_WAIT_VFALL:
otg_drv_vbus(fsm, 0);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_HOST);
break;
case OTG_STATE_A_VBUS_ERR:
otg_drv_vbus(fsm, 0);
otg_loc_conn(fsm, 0);
otg_loc_sof(fsm, 0);
otg_set_protocol(fsm, PROTO_UNDEF);
break;
default:
break;
}
fsm->transceiver->state = new_state;
return 0;
}
/* State change judgement */
int otg_statemachine(struct otg_fsm *fsm)
{
enum usb_otg_state state;
unsigned long flags;
spin_lock_irqsave(&fsm->lock, flags);
state = fsm->transceiver->state;
state_changed = 0;
/* State machine state change judgement */
switch (state) {
case OTG_STATE_UNDEFINED:
VDBG("fsm->id = %d\n", fsm->id);
if (fsm->id)
otg_set_state(fsm, OTG_STATE_B_IDLE);
else
otg_set_state(fsm, OTG_STATE_A_IDLE);
break;
case OTG_STATE_B_IDLE:
if (!fsm->id)
otg_set_state(fsm, OTG_STATE_A_IDLE);
else if (fsm->b_sess_vld && fsm->transceiver->gadget)
otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp)
otg_set_state(fsm, OTG_STATE_B_SRP_INIT);
break;
case OTG_STATE_B_SRP_INIT:
if (!fsm->id || fsm->b_srp_done)
otg_set_state(fsm, OTG_STATE_B_IDLE);
break;
case OTG_STATE_B_PERIPHERAL:
if (!fsm->id || !fsm->b_sess_vld)
otg_set_state(fsm, OTG_STATE_B_IDLE);
else if (fsm->b_bus_req && fsm->transceiver->
gadget->b_hnp_enable && fsm->a_bus_suspend)
otg_set_state(fsm, OTG_STATE_B_WAIT_ACON);
break;
case OTG_STATE_B_WAIT_ACON:
if (fsm->a_conn)
otg_set_state(fsm, OTG_STATE_B_HOST);
else if (!fsm->id || !fsm->b_sess_vld)
otg_set_state(fsm, OTG_STATE_B_IDLE);
else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) {
fsm->b_ase0_brst_tmout = 0;
otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
}
break;
case OTG_STATE_B_HOST:
if (!fsm->id || !fsm->b_sess_vld)
otg_set_state(fsm, OTG_STATE_B_IDLE);
else if (!fsm->b_bus_req || !fsm->a_conn)
otg_set_state(fsm, OTG_STATE_B_PERIPHERAL);
break;
case OTG_STATE_A_IDLE:
if (fsm->id)
otg_set_state(fsm, OTG_STATE_B_IDLE);
else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det))
otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE);
break;
case OTG_STATE_A_WAIT_VRISE:
if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld ||
fsm->a_wait_vrise_tmout) {
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
}
break;
case OTG_STATE_A_WAIT_BCON:
if (!fsm->a_vbus_vld)
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
else if (fsm->b_conn)
otg_set_state(fsm, OTG_STATE_A_HOST);
else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout)
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
break;
case OTG_STATE_A_HOST:
if ((!fsm->a_bus_req || fsm->a_suspend_req) &&
fsm->transceiver->host->b_hnp_enable)
otg_set_state(fsm, OTG_STATE_A_SUSPEND);
else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop)
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
else if (!fsm->a_vbus_vld)
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
break;
case OTG_STATE_A_SUSPEND:
if (!fsm->b_conn && fsm->transceiver->host->b_hnp_enable)
otg_set_state(fsm, OTG_STATE_A_PERIPHERAL);
else if (!fsm->b_conn && !fsm->transceiver->host->b_hnp_enable)
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
else if (fsm->a_bus_req || fsm->b_bus_resume)
otg_set_state(fsm, OTG_STATE_A_HOST);
else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout)
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
else if (!fsm->a_vbus_vld)
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
break;
case OTG_STATE_A_PERIPHERAL:
if (fsm->id || fsm->a_bus_drop)
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
else if (fsm->b_bus_suspend)
otg_set_state(fsm, OTG_STATE_A_WAIT_BCON);
else if (!fsm->a_vbus_vld)
otg_set_state(fsm, OTG_STATE_A_VBUS_ERR);
break;
case OTG_STATE_A_WAIT_VFALL:
if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld &&
!fsm->b_conn))
otg_set_state(fsm, OTG_STATE_A_IDLE);
break;
case OTG_STATE_A_VBUS_ERR:
if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err)
otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL);
break;
default:
break;
}
spin_unlock_irqrestore(&fsm->lock, flags);
VDBG("quit statemachine, changed = %d\n", state_changed);
return state_changed;
}
/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#undef DEBUG
#undef VERBOSE
#ifdef DEBUG
#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt , \
__func__, ## args)
#else
#define DBG(fmt, args...) do {} while (0)
#endif
#ifdef VERBOSE
#define VDBG DBG
#else
#define VDBG(stuff...) do {} while (0)
#endif
#ifdef VERBOSE
#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
#else
#define MPC_LOC do {} while (0)
#endif
#define PROTO_UNDEF (0)
#define PROTO_HOST (1)
#define PROTO_GADGET (2)
/* OTG state machine according to the OTG spec */
struct otg_fsm {
/* Input */
int a_bus_resume;
int a_bus_suspend;
int a_conn;
int a_sess_vld;
int a_srp_det;
int a_vbus_vld;
int b_bus_resume;
int b_bus_suspend;
int b_conn;
int b_se0_srp;
int b_sess_end;
int b_sess_vld;
int id;
/* Internal variables */
int a_set_b_hnp_en;
int b_srp_done;
int b_hnp_enable;
/* Timeout indicator for timers */
int a_wait_vrise_tmout;
int a_wait_bcon_tmout;
int a_aidl_bdis_tmout;
int b_ase0_brst_tmout;
/* Informative variables */
int a_bus_drop;
int a_bus_req;
int a_clr_err;
int a_suspend_req;
int b_bus_req;
/* Output */
int drv_vbus;
int loc_conn;
int loc_sof;
struct otg_fsm_ops *ops;
struct otg_transceiver *transceiver;
/* Current usb protocol used: 0:undefine; 1:host; 2:client */
int protocol;
spinlock_t lock;
};
struct otg_fsm_ops {
void (*chrg_vbus)(int on);
void (*drv_vbus)(int on);
void (*loc_conn)(int on);
void (*loc_sof)(int on);
void (*start_pulse)(void);
void (*add_timer)(void *timer);
void (*del_timer)(void *timer);
int (*start_host)(struct otg_fsm *fsm, int on);
int (*start_gadget)(struct otg_fsm *fsm, int on);
};
static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on)
{
fsm->ops->chrg_vbus(on);
}
static inline void otg_drv_vbus(struct otg_fsm *fsm, int on)
{
if (fsm->drv_vbus != on) {
fsm->drv_vbus = on;
fsm->ops->drv_vbus(on);
}
}
static inline void otg_loc_conn(struct otg_fsm *fsm, int on)
{
if (fsm->loc_conn != on) {
fsm->loc_conn = on;
fsm->ops->loc_conn(on);
}
}
static inline void otg_loc_sof(struct otg_fsm *fsm, int on)
{
if (fsm->loc_sof != on) {
fsm->loc_sof = on;
fsm->ops->loc_sof(on);
}
}
static inline void otg_start_pulse(struct otg_fsm *fsm)
{
fsm->ops->start_pulse();
}
static inline void otg_add_timer(struct otg_fsm *fsm, void *timer)
{
fsm->ops->add_timer(timer);
}
static inline void otg_del_timer(struct otg_fsm *fsm, void *timer)
{
fsm->ops->del_timer(timer);
}
int otg_statemachine(struct otg_fsm *fsm);
/* Defined by device specific driver, for different timer implementation */
extern struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
*a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr,
*a_wait_enum_tmr;
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment