regulator: DA9052/53 Regulator support

The Dialog PMIC has below featured regulators:-
DA9052-BC - 4 DVS Buck converters 0.5V - 3.6V upto 1Amp.
DA9053-AA/BX - 4 DVS Buck converters 0.5V - 2.5V upto 3Amp.
DA9052/53 - 10 Programmable LDO's High PSSR, 1% accuracy.

This patch support all the DA9052 and Da9053 regulators. The output voltages are
fully programmable via I2C or SPI interface. The platform data with regulation
constraints is passed down from the board to the regulator.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/Kconfig

@@ -178,6 +178,13 @@ config REGULATOR_DA903X
 	  Say y here to support the BUCKs and LDOs regulators found on
 	  Dialog Semiconductor DA9030/DA9034 PMIC.
 
+config REGULATOR_DA9052
+	tristate "Dialog DA9052/DA9053 regulators"
+	depends on PMIC_DA9052
+	help
+	  This driver supports the voltage regulators of DA9052-BC and
+	  DA9053-AA/Bx PMIC.
+
 config REGULATOR_PCF50633
 	tristate "PCF50633 regulator driver"
         depends on MFD_PCF50633

drivers/regulator/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
+obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o