Merge branch 'be2net-next'

Sathya Perla says:

====================
be2net: patch set

Patch 1 fixes some minor issues with log messages in be2net.

Patch 2 replaces strcpy() calls with strlcpy() to avoid possible buffer
overflow.

Patch 3 improves the RX buffer posting scheme for jumbo frames.

Patch 4 replaces the use of v0 of SET_FLOW_CONTROL cmd with v1 to receive
a definitive completion status from FW.

Patch 5 adds support for ethtool "-m" ethtool option.

Patch 6 fixes port-type reporting via ethtool get_settings for QSFP/SFP+
interfaces.

Patch 7 fixes the usage of MODIFY_EQD FW cmd to target a max of 8 EQs on
Lancer chip.

Patch 8 enables PCIe error reporting even for VFs.

Pls consider applying this patch set to net-next. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -407,9 +407,9 @@ struct phy_info {
 	u16 auto_speeds_supported;
 	u16 fixed_speeds_supported;
 	int link_speed;
-	u32 dac_cable_len;
 	u32 advertising;
 	u32 supported;
+	u8 cable_type;
 };
 
 struct be_resources {

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -309,8 +309,6 @@ static void be_async_grp5_evt_process(struct be_adapter *adapter,
 		be_async_grp5_pvid_state_process(adapter, compl);
 		break;
 	default:
-		dev_warn(&adapter->pdev->dev, "Unknown grp5 event 0x%x!\n",
-			 event_type);
 		break;
 	}
 }
@@ -1772,8 +1770,10 @@ int be_cmd_get_fw_ver(struct be_adapter *adapter)
 	if (!status) {
 		struct be_cmd_resp_get_fw_version *resp = embedded_payload(wrb);
 
-		strcpy(adapter->fw_ver, resp->firmware_version_string);
-		strcpy(adapter->fw_on_flash, resp->fw_on_flash_version_string);
+		strlcpy(adapter->fw_ver, resp->firmware_version_string,
+			sizeof(adapter->fw_ver));
+		strlcpy(adapter->fw_on_flash, resp->fw_on_flash_version_string,
+			sizeof(adapter->fw_on_flash));
 	}
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
@@ -1783,7 +1783,7 @@ int be_cmd_get_fw_ver(struct be_adapter *adapter)
 /* set the EQ delay interval of an EQ to specified value
  * Uses async mcc
  */
-int be_cmd_modify_eqd(struct be_adapter *adapter, struct be_set_eqd *set_eqd,
+int __be_cmd_modify_eqd(struct be_adapter *adapter, struct be_set_eqd *set_eqd,
 			int num)
 {
 	struct be_mcc_wrb *wrb;
@@ -1817,6 +1817,25 @@ int be_cmd_modify_eqd(struct be_adapter *adapter, struct be_set_eqd *set_eqd,
 	return status;
 }
 
+int be_cmd_modify_eqd(struct be_adapter *adapter, struct be_set_eqd *set_eqd,
+		      int num)
+{
+	int num_eqs, i = 0;
+
+	if (lancer_chip(adapter) && num > 8) {
+		while (num) {
+			num_eqs = min(num, 8);
+			__be_cmd_modify_eqd(adapter, &set_eqd[i], num_eqs);
+			i += num_eqs;
+			num -= num_eqs;
+		}
+	} else {
+		__be_cmd_modify_eqd(adapter, set_eqd, num);
+	}
+
+	return 0;
+}
+
 /* Uses sycnhronous mcc */
 int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
 		       u32 num)
@@ -1948,6 +1967,7 @@ int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
 			       OPCODE_COMMON_SET_FLOW_CONTROL, sizeof(*req),
 			       wrb, NULL);
 
+	req->hdr.version = 1;
 	req->tx_flow_control = cpu_to_le16((u16)tx_fc);
 	req->rx_flow_control = cpu_to_le16((u16)rx_fc);
 
@@ -1955,6 +1975,10 @@ int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc)
 
 err:
 	spin_unlock_bh(&adapter->mcc_lock);
+
+	if (base_status(status) == MCC_STATUS_FEATURE_NOT_SUPPORTED)
+		return  -EOPNOTSUPP;
+
 	return status;
 }
 
@@ -2171,6 +2195,53 @@ int be_cmd_get_beacon_state(struct be_adapter *adapter, u8 port_num, u32 *state)
 	return status;
 }
 
+/* Uses sync mcc */
+int be_cmd_read_port_transceiver_data(struct be_adapter *adapter,
+				      u8 page_num, u8 *data)
+{
+	struct be_dma_mem cmd;
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_port_type *req;
+	int status;
+
+	if (page_num > TR_PAGE_A2)
+		return -EINVAL;
+
+	cmd.size = sizeof(struct be_cmd_resp_port_type);
+	cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+	if (!cmd.va) {
+		dev_err(&adapter->pdev->dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+	memset(cmd.va, 0, cmd.size);
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = cmd.va;
+
+	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			       OPCODE_COMMON_READ_TRANSRECV_DATA,
+			       cmd.size, wrb, &cmd);
+
+	req->port = cpu_to_le32(adapter->hba_port_num);
+	req->page_num = cpu_to_le32(page_num);
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_port_type *resp = cmd.va;
+
+		memcpy(data, resp->page_data, PAGE_DATA_LEN);
+	}
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+	return status;
+}
+
 int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			    u32 data_size, u32 data_offset,
 			    const char *obj_name, u32 *data_written,
@@ -2211,7 +2282,7 @@ int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 	req->write_offset = cpu_to_le32(data_offset);
-	strcpy(req->object_name, obj_name);
+	strlcpy(req->object_name, obj_name, sizeof(req->object_name));
 	req->descriptor_count = cpu_to_le32(1);
 	req->buf_len = cpu_to_le32(data_size);
 	req->addr_low = cpu_to_le32((cmd->dma +
@@ -2244,6 +2315,31 @@ int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,
 	return status;
 }
 
+int be_cmd_query_cable_type(struct be_adapter *adapter)
+{
+	u8 page_data[PAGE_DATA_LEN];
+	int status;
+
+	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
+						   page_data);
+	if (!status) {
+		switch (adapter->phy.interface_type) {
+		case PHY_TYPE_QSFP:
+			adapter->phy.cable_type =
+				page_data[QSFP_PLUS_CABLE_TYPE_OFFSET];
+			break;
+		case PHY_TYPE_SFP_PLUS_10GB:
+			adapter->phy.cable_type =
+				page_data[SFP_PLUS_CABLE_TYPE_OFFSET];
+			break;
+		default:
+			adapter->phy.cable_type = 0;
+			break;
+		}
+	}
+	return status;
+}
+
 int lancer_cmd_delete_object(struct be_adapter *adapter, const char *obj_name)
 {
 	struct lancer_cmd_req_delete_object *req;
@@ -2264,7 +2360,7 @@ int lancer_cmd_delete_object(struct be_adapter *adapter, const char *obj_name)
 			       OPCODE_COMMON_DELETE_OBJECT,
 			       sizeof(*req), wrb, NULL);
 
-	strcpy(req->object_name, obj_name);
+	strlcpy(req->object_name, obj_name, sizeof(req->object_name));
 
 	status = be_mcc_notify_wait(adapter);
 err:

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -57,7 +57,8 @@ enum mcc_base_status {
 	MCC_STATUS_ILLEGAL_FIELD = 3,
 	MCC_STATUS_INSUFFICIENT_BUFFER = 4,
 	MCC_STATUS_UNAUTHORIZED_REQUEST = 5,
-	MCC_STATUS_NOT_SUPPORTED = 66
+	MCC_STATUS_NOT_SUPPORTED = 66,
+	MCC_STATUS_FEATURE_NOT_SUPPORTED = 68
 };
 
 /* Additional status */
@@ -1013,28 +1014,23 @@ enum {
 	TR_PAGE_A2 = 0xa2
 };
 
+/* From SFF-8436 QSFP+ spec */
+#define	QSFP_PLUS_CABLE_TYPE_OFFSET	0x83
+#define	QSFP_PLUS_CR4_CABLE		0x8
+#define	QSFP_PLUS_SR4_CABLE		0x4
+#define	QSFP_PLUS_LR4_CABLE		0x2
+
+/* From SFF-8472 spec */
+#define	SFP_PLUS_SFF_8472_COMP		0x5E
+#define	SFP_PLUS_CABLE_TYPE_OFFSET	0x8
+#define	SFP_PLUS_COPPER_CABLE		0x4
+
+#define PAGE_DATA_LEN   256
 struct be_cmd_resp_port_type {
 	struct be_cmd_resp_hdr hdr;
 	u32 page_num;
 	u32 port;
-	struct data {
-		u8 identifier;
-		u8 identifier_ext;
-		u8 connector;
-		u8 transceiver[8];
-		u8 rsvd0[3];
-		u8 length_km;
-		u8 length_hm;
-		u8 length_om1;
-		u8 length_om2;
-		u8 length_cu;
-		u8 length_cu_m;
-		u8 vendor_name[16];
-		u8 rsvd;
-		u8 vendor_oui[3];
-		u8 vendor_pn[16];
-		u8 vendor_rev[4];
-	} data;
+	u8  page_data[PAGE_DATA_LEN];
 };
 
 /******************** Get FW Version *******************/
@@ -1367,6 +1363,9 @@ enum {
 	PHY_TYPE_BASET_1GB,
 	PHY_TYPE_BASEX_1GB,
 	PHY_TYPE_SGMII,
+	PHY_TYPE_QSFP,
+	PHY_TYPE_KR4_40GB,
+	PHY_TYPE_KR2_20GB,
 	PHY_TYPE_DISABLED = 255
 };
 
@@ -1375,6 +1374,7 @@ enum {
 #define BE_SUPPORTED_SPEED_100MBPS	2
 #define BE_SUPPORTED_SPEED_1GBPS	4
 #define BE_SUPPORTED_SPEED_10GBPS	8
+#define BE_SUPPORTED_SPEED_40GBPS	0x20
 
 #define BE_AN_EN			0x2
 #define BE_PAUSE_SYM_EN			0x80
@@ -2066,6 +2066,9 @@ int be_cmd_set_beacon_state(struct be_adapter *adapter, u8 port_num, u8 beacon,
 			    u8 status, u8 state);
 int be_cmd_get_beacon_state(struct be_adapter *adapter, u8 port_num,
 			    u32 *state);
+int be_cmd_read_port_transceiver_data(struct be_adapter *adapter,
+				      u8 page_num, u8 *data);
+int be_cmd_query_cable_type(struct be_adapter *adapter);
 int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			  u32 flash_oper, u32 flash_opcode, u32 buf_size);
 int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd,

drivers/net/ethernet/emulex/benet/be_ethtool.c

@@ -475,18 +475,27 @@ static int be_get_sset_count(struct net_device *netdev, int stringset)
 	}
 }
 
-static u32 be_get_port_type(u32 phy_type, u32 dac_cable_len)
+static u32 be_get_port_type(struct be_adapter *adapter)
 {
 	u32 port;
 
-	switch (phy_type) {
+	switch (adapter->phy.interface_type) {
 	case PHY_TYPE_BASET_1GB:
 	case PHY_TYPE_BASEX_1GB:
 	case PHY_TYPE_SGMII:
 		port = PORT_TP;
 		break;
 	case PHY_TYPE_SFP_PLUS_10GB:
-		port = dac_cable_len ? PORT_DA : PORT_FIBRE;
+		if (adapter->phy.cable_type & SFP_PLUS_COPPER_CABLE)
+			port = PORT_DA;
+		else
+			port = PORT_FIBRE;
+		break;
+	case PHY_TYPE_QSFP:
+		if (adapter->phy.cable_type & QSFP_PLUS_CR4_CABLE)
+			port = PORT_DA;
+		else
+			port = PORT_FIBRE;
 		break;
 	case PHY_TYPE_XFP_10GB:
 	case PHY_TYPE_SFP_1GB:
@@ -502,11 +511,11 @@ static u32 be_get_port_type(u32 phy_type, u32 dac_cable_len)
 	return port;
 }
 
-static u32 convert_to_et_setting(u32 if_type, u32 if_speeds)
+static u32 convert_to_et_setting(struct be_adapter *adapter, u32 if_speeds)
 {
 	u32 val = 0;
 
-	switch (if_type) {
+	switch (adapter->phy.interface_type) {
 	case PHY_TYPE_BASET_1GB:
 	case PHY_TYPE_BASEX_1GB:
 	case PHY_TYPE_SGMII:
@@ -529,6 +538,20 @@ static u32 convert_to_et_setting(u32 if_type, u32 if_speeds)
 		val |= SUPPORTED_Backplane |
 				SUPPORTED_10000baseKR_Full;
 		break;
+	case PHY_TYPE_QSFP:
+		if (if_speeds & BE_SUPPORTED_SPEED_40GBPS) {
+			switch (adapter->phy.cable_type) {
+			case QSFP_PLUS_CR4_CABLE:
+				val |= SUPPORTED_40000baseCR4_Full;
+				break;
+			case QSFP_PLUS_LR4_CABLE:
+				val |= SUPPORTED_40000baseLR4_Full;
+				break;
+			default:
+				val |= SUPPORTED_40000baseSR4_Full;
+				break;
+			}
+		}
 	case PHY_TYPE_SFP_PLUS_10GB:
 	case PHY_TYPE_XFP_10GB:
 	case PHY_TYPE_SFP_1GB:
@@ -569,8 +592,6 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 	int status;
 	u32 auto_speeds;
 	u32 fixed_speeds;
-	u32 dac_cable_len;
-	u16 interface_type;
 
 	if (adapter->phy.link_speed < 0) {
 		status = be_cmd_link_status_query(adapter, &link_speed,
@@ -581,21 +602,19 @@ static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 
 		status = be_cmd_get_phy_info(adapter);
 		if (!status) {
-			interface_type = adapter->phy.interface_type;
 			auto_speeds = adapter->phy.auto_speeds_supported;
 			fixed_speeds = adapter->phy.fixed_speeds_supported;
-			dac_cable_len = adapter->phy.dac_cable_len;
+
+			be_cmd_query_cable_type(adapter);
 
 			ecmd->supported =
-				convert_to_et_setting(interface_type,
+				convert_to_et_setting(adapter,
 						      auto_speeds |
 						      fixed_speeds);
 			ecmd->advertising =
-				convert_to_et_setting(interface_type,
-						      auto_speeds);
+				convert_to_et_setting(adapter, auto_speeds);
 
-			ecmd->port = be_get_port_type(interface_type,
-						      dac_cable_len);
+			ecmd->port = be_get_port_type(adapter);
 
 			if (adapter->phy.auto_speeds_supported) {
 				ecmd->supported |= SUPPORTED_Autoneg;
@@ -676,7 +695,7 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
 	status = be_cmd_set_flow_control(adapter,
 					 adapter->tx_fc, adapter->rx_fc);
 	if (status)
-		dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
+		dev_warn(&adapter->pdev->dev, "Pause param set failed\n");
 
 	return be_cmd_status(status);
 }
@@ -1189,6 +1208,58 @@ static int be_set_rxfh(struct net_device *netdev, const u32 *indir,
 	return 0;
 }
 
+static int be_get_module_info(struct net_device *netdev,
+			      struct ethtool_modinfo *modinfo)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	u8 page_data[PAGE_DATA_LEN];
+	int status;
+
+	if (!check_privilege(adapter, MAX_PRIVILEGES))
+		return -EOPNOTSUPP;
+
+	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
+						   page_data);
+	if (!status) {
+		if (!page_data[SFP_PLUS_SFF_8472_COMP]) {
+			modinfo->type = ETH_MODULE_SFF_8079;
+			modinfo->eeprom_len = PAGE_DATA_LEN;
+		} else {
+			modinfo->type = ETH_MODULE_SFF_8472;
+			modinfo->eeprom_len = 2 * PAGE_DATA_LEN;
+		}
+	}
+	return be_cmd_status(status);
+}
+
+static int be_get_module_eeprom(struct net_device *netdev,
+				struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	int status;
+
+	if (!check_privilege(adapter, MAX_PRIVILEGES))
+		return -EOPNOTSUPP;
+
+	status = be_cmd_read_port_transceiver_data(adapter, TR_PAGE_A0,
+						   data);
+	if (status)
+		goto err;
+
+	if (eeprom->offset + eeprom->len > PAGE_DATA_LEN) {
+		status = be_cmd_read_port_transceiver_data(adapter,
+							   TR_PAGE_A2,
+							   data +
+							   PAGE_DATA_LEN);
+		if (status)
+			goto err;
+	}
+	if (eeprom->offset)
+		memcpy(data, data + eeprom->offset, eeprom->len);
+err:
+	return be_cmd_status(status);
+}
+
 const struct ethtool_ops be_ethtool_ops = {
 	.get_settings = be_get_settings,
 	.get_drvinfo = be_get_drvinfo,
@@ -1220,5 +1291,7 @@ const struct ethtool_ops be_ethtool_ops = {
 	.get_rxfh = be_get_rxfh,
 	.set_rxfh = be_set_rxfh,
 	.get_channels = be_get_channels,
-	.set_channels = be_set_channels
+	.set_channels = be_set_channels,
+	.get_module_info = be_get_module_info,
+	.get_module_eeprom = be_get_module_eeprom
 };

drivers/net/ethernet/emulex/benet/be_main.c

@@ -1093,6 +1093,7 @@ static int be_change_mtu(struct net_device *netdev, int new_mtu)
  */
 static int be_vid_config(struct be_adapter *adapter)
 {
+	struct device *dev = &adapter->pdev->dev;
 	u16 vids[BE_NUM_VLANS_SUPPORTED];
 	u16 num = 0, i = 0;
 	int status = 0;
@@ -1114,16 +1115,15 @@ static int be_vid_config(struct be_adapter *adapter)
 		if (addl_status(status) ==
 				MCC_ADDL_STATUS_INSUFFICIENT_RESOURCES)
 			goto set_vlan_promisc;
-		dev_err(&adapter->pdev->dev,
-			"Setting HW VLAN filtering failed.\n");
+		dev_err(dev, "Setting HW VLAN filtering failed\n");
 	} else {
 		if (adapter->flags & BE_FLAGS_VLAN_PROMISC) {
 			/* hw VLAN filtering re-enabled. */
 			status = be_cmd_rx_filter(adapter,
 						  BE_FLAGS_VLAN_PROMISC, OFF);
 			if (!status) {
-				dev_info(&adapter->pdev->dev,
-					 "Disabling VLAN Promiscuous mode.\n");
+				dev_info(dev,
+					 "Disabling VLAN Promiscuous mode\n");
 				adapter->flags &= ~BE_FLAGS_VLAN_PROMISC;
 			}
 		}
@@ -1137,11 +1137,10 @@ static int be_vid_config(struct be_adapter *adapter)
 
 	status = be_cmd_rx_filter(adapter, BE_FLAGS_VLAN_PROMISC, ON);
 	if (!status) {
-		dev_info(&adapter->pdev->dev, "Enable VLAN Promiscuous mode\n");
+		dev_info(dev, "Enable VLAN Promiscuous mode\n");
 		adapter->flags |= BE_FLAGS_VLAN_PROMISC;
 	} else
-		dev_err(&adapter->pdev->dev,
-			"Failed to enable VLAN Promiscuous mode.\n");
+		dev_err(dev, "Failed to enable VLAN Promiscuous mode\n");
 	return status;
 }
 
@@ -1853,7 +1852,7 @@ static inline struct page *be_alloc_pages(u32 size, gfp_t gfp)
  * Allocate a page, split it to fragments of size rx_frag_size and post as
  * receive buffers to BE
  */
-static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp)
+static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp, u32 frags_needed)
 {
 	struct be_adapter *adapter = rxo->adapter;
 	struct be_rx_page_info *page_info = NULL, *prev_page_info = NULL;
@@ -1862,10 +1861,10 @@ static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp)
 	struct device *dev = &adapter->pdev->dev;
 	struct be_eth_rx_d *rxd;
 	u64 page_dmaaddr = 0, frag_dmaaddr;
-	u32 posted, page_offset = 0;
+	u32 posted, page_offset = 0, notify = 0;
 
 	page_info = &rxo->page_info_tbl[rxq->head];
-	for (posted = 0; posted < MAX_RX_POST && !page_info->page; posted++) {
+	for (posted = 0; posted < frags_needed && !page_info->page; posted++) {
 		if (!pagep) {
 			pagep = be_alloc_pages(adapter->big_page_size, gfp);
 			if (unlikely(!pagep)) {
@@ -1921,7 +1920,11 @@ static void be_post_rx_frags(struct be_rx_obj *rxo, gfp_t gfp)
 		atomic_add(posted, &rxq->used);
 		if (rxo->rx_post_starved)
 			rxo->rx_post_starved = false;
-		be_rxq_notify(adapter, rxq->id, posted);
+		do {
+			notify = min(256u, posted);
+			be_rxq_notify(adapter, rxq->id, notify);
+			posted -= notify;
+		} while (posted);
 	} else if (atomic_read(&rxq->used) == 0) {
 		/* Let be_worker replenish when memory is available */
 		rxo->rx_post_starved = true;
@@ -2372,6 +2375,7 @@ static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi,
 	struct be_queue_info *rx_cq = &rxo->cq;
 	struct be_rx_compl_info *rxcp;
 	u32 work_done;
+	u32 frags_consumed = 0;
 
 	for (work_done = 0; work_done < budget; work_done++) {
 		rxcp = be_rx_compl_get(rxo);
@@ -2404,6 +2408,7 @@ static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi,
 			be_rx_compl_process(rxo, napi, rxcp);
 
 loop_continue:
+		frags_consumed += rxcp->num_rcvd;
 		be_rx_stats_update(rxo, rxcp);
 	}
 
@@ -2415,7 +2420,9 @@ static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi,
 		 */
 		if (atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM &&
 		    !rxo->rx_post_starved)
-			be_post_rx_frags(rxo, GFP_ATOMIC);
+			be_post_rx_frags(rxo, GFP_ATOMIC,
+					 max_t(u32, MAX_RX_POST,
+					       frags_consumed));
 	}
 
 	return work_done;
@@ -2897,7 +2904,7 @@ static int be_rx_qs_create(struct be_adapter *adapter)
 
 	/* First time posting */
 	for_all_rx_queues(adapter, rxo, i)
-		be_post_rx_frags(rxo, GFP_KERNEL);
+		be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
 	return 0;
 }
 
@@ -3387,7 +3394,7 @@ static int be_get_sriov_config(struct be_adapter *adapter)
 
 	if (!be_max_vfs(adapter)) {
 		if (num_vfs)
-			dev_warn(dev, "device doesn't support SRIOV\n");
+			dev_warn(dev, "SRIOV is disabled. Ignoring num_vfs\n");
 		adapter->num_vfs = 0;
 		return 0;
 	}
@@ -3661,7 +3668,7 @@ static int be_setup(struct be_adapter *adapter)
 	dev_info(dev, "FW version is %s\n", adapter->fw_ver);
 
 	if (BE2_chip(adapter) && fw_major_num(adapter->fw_ver) < 4) {
-		dev_err(dev, "Firmware on card is old(%s), IRQs may not work.",
+		dev_err(dev, "Firmware on card is old(%s), IRQs may not work",
 			adapter->fw_ver);
 		dev_err(dev, "Please upgrade firmware to version >= 4.0\n");
 	}
@@ -4779,7 +4786,7 @@ static void be_worker(struct work_struct *work)
 		 * allocation failures.
 		 */
 		if (rxo->rx_post_starved)
-			be_post_rx_frags(rxo, GFP_KERNEL);
+			be_post_rx_frags(rxo, GFP_KERNEL, MAX_RX_POST);
 	}
 
 	be_eqd_update(adapter);
@@ -4870,11 +4877,9 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
 		}
 	}
 
-	if (be_physfn(adapter)) {
 	status = pci_enable_pcie_error_reporting(pdev);
 	if (!status)
 		dev_info(&pdev->dev, "PCIe error reporting enabled\n");
-	}
 
 	status = be_ctrl_init(adapter);
 	if (status)