Merge branch 'x86/asm' into perf/x86, to avoid conflicts with upcoming patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/x86/entry_64.txt

@@ -78,9 +78,6 @@ The expensive (paranoid) way is to read back the MSR_GS_BASE value
 	xorl %ebx,%ebx
 1:	ret
 
-and the whole paranoid non-paranoid macro complexity is about whether
-to suffer that RDMSR cost.
-
 If we are at an interrupt or user-trap/gate-alike boundary then we can
 use the faster check: the stack will be a reliable indicator of
 whether SWAPGS was already done: if we see that we are a secondary
@@ -93,6 +90,15 @@ which might have triggered right after a normal entry wrote CS to the
 stack but before we executed SWAPGS, then the only safe way to check
 for GS is the slower method: the RDMSR.
 
-So we try only to mark those entry methods 'paranoid' that absolutely
-need the more expensive check for the GS base - and we generate all
-'normal' entry points with the regular (faster) entry macros.
+Therefore, super-atomic entries (except NMI, which is handled separately)
+must use idtentry with paranoid=1 to handle gsbase correctly.  This
+triggers three main behavior changes:
+
+ - Interrupt entry will use the slower gsbase check.
+ - Interrupt entry from user mode will switch off the IST stack.
+ - Interrupt exit to kernel mode will not attempt to reschedule.
+
+We try to only use IST entries and the paranoid entry code for vectors
+that absolutely need the more expensive check for the GS base - and we
+generate all 'normal' entry points with the regular (faster) paranoid=0
+variant.

Documentation/x86/x86_64/kernel-stacks

@@ -40,9 +40,11 @@ An IST is selected by a non-zero value in the IST field of an
 interrupt-gate descriptor.  When an interrupt occurs and the hardware
 loads such a descriptor, the hardware automatically sets the new stack
 pointer based on the IST value, then invokes the interrupt handler.  If
-software wants to allow nested IST interrupts then the handler must
-adjust the IST values on entry to and exit from the interrupt handler.
-(This is occasionally done, e.g. for debug exceptions.)
+the interrupt came from user mode, then the interrupt handler prologue
+will switch back to the per-thread stack.  If software wants to allow
+nested IST interrupts then the handler must adjust the IST values on
+entry to and exit from the interrupt handler.  (This is occasionally
+done, e.g. for debug exceptions.)
 
 Events with different IST codes (i.e. with different stacks) can be
 nested.  For example, a debug interrupt can safely be interrupted by an

arch/x86/ia32/ia32entry.S

@@ -179,8 +179,8 @@ sysenter_dispatch:
 sysexit_from_sys_call:
 	andl    $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
 	/* clear IF, that popfq doesn't enable interrupts early */
-	andl  $~0x200,EFLAGS-R11(%rsp) 
-	movl	RIP-R11(%rsp),%edx		/* User %eip */
+	andl	$~0x200,EFLAGS-ARGOFFSET(%rsp)
+	movl	RIP-ARGOFFSET(%rsp),%edx		/* User %eip */
 	CFI_REGISTER rip,rdx
 	RESTORE_ARGS 0,24,0,0,0,0
 	xorq	%r8,%r8

arch/x86/include/asm/calling.h

@@ -83,7 +83,6 @@ For 32-bit we have the following conventions - kernel is built with
 #define SS		160
 
 #define ARGOFFSET	R11
-#define SWFRAME		ORIG_RAX
 
 	.macro SAVE_ARGS addskip=0, save_rcx=1, save_r891011=1, rax_enosys=0
 	subq  $9*8+\addskip, %rsp

arch/x86/include/asm/mce.h

@@ -190,7 +190,6 @@ enum mcp_flags {
 void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
 
 int mce_notify_irq(void);
-void mce_notify_process(void);
 
 DECLARE_PER_CPU(struct mce, injectm);
 

arch/x86/include/asm/thread_info.h

@@ -75,7 +75,6 @@ struct thread_info {
 #define TIF_SYSCALL_EMU		6	/* syscall emulation active */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SECCOMP		8	/* secure computing */
-#define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
 #define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
 #define TIF_UPROBE		12	/* breakpointed or singlestepping */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
@@ -100,7 +99,6 @@ struct thread_info {
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
-#define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
 #define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
@@ -140,7 +138,7 @@ struct thread_info {
 
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
-	(_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME |	\
+	(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME |				\
 	 _TIF_USER_RETURN_NOTIFY | _TIF_UPROBE)
 
 /* flags to check in __switch_to() */
@@ -170,6 +168,17 @@ static inline struct thread_info *current_thread_info(void)
 	return ti;
 }
 
+static inline unsigned long current_stack_pointer(void)
+{
+	unsigned long sp;
+#ifdef CONFIG_X86_64
+	asm("mov %%rsp,%0" : "=g" (sp));
+#else
+	asm("mov %%esp,%0" : "=g" (sp));
+#endif
+	return sp;
+}
+
 #else /* !__ASSEMBLY__ */
 
 /* how to get the thread information struct from ASM */

arch/x86/include/asm/traps.h

 #ifndef _ASM_X86_TRAPS_H
 #define _ASM_X86_TRAPS_H
 
+#include <linux/context_tracking_state.h>
 #include <linux/kprobes.h>
 
 #include <asm/debugreg.h>
@@ -110,6 +111,11 @@ asmlinkage void smp_thermal_interrupt(void);
 asmlinkage void mce_threshold_interrupt(void);
 #endif
 
+extern enum ctx_state ist_enter(struct pt_regs *regs);
+extern void ist_exit(struct pt_regs *regs, enum ctx_state prev_state);
+extern void ist_begin_non_atomic(struct pt_regs *regs);
+extern void ist_end_non_atomic(void);
+
 /* Interrupts/Exceptions */
 enum {
 	X86_TRAP_DE = 0,	/*  0, Divide-by-zero */

arch/x86/kernel/cpu/mcheck/mce.c

@@ -43,6 +43,7 @@
 #include <linux/export.h>
 
 #include <asm/processor.h>
+#include <asm/traps.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
 
@@ -1002,51 +1003,6 @@ static void mce_clear_state(unsigned long *toclear)
 	}
 }
 
-/*
- * Need to save faulting physical address associated with a process
- * in the machine check handler some place where we can grab it back
- * later in mce_notify_process()
- */
-#define	MCE_INFO_MAX	16
-
-struct mce_info {
-	atomic_t		inuse;
-	struct task_struct	*t;
-	__u64			paddr;
-	int			restartable;
-} mce_info[MCE_INFO_MAX];
-
-static void mce_save_info(__u64 addr, int c)
-{
-	struct mce_info *mi;
-
-	for (mi = mce_info; mi < &mce_info[MCE_INFO_MAX]; mi++) {
-		if (atomic_cmpxchg(&mi->inuse, 0, 1) == 0) {
-			mi->t = current;
-			mi->paddr = addr;
-			mi->restartable = c;
-			return;
-		}
-	}
-
-	mce_panic("Too many concurrent recoverable errors", NULL, NULL);
-}
-
-static struct mce_info *mce_find_info(void)
-{
-	struct mce_info *mi;
-
-	for (mi = mce_info; mi < &mce_info[MCE_INFO_MAX]; mi++)
-		if (atomic_read(&mi->inuse) && mi->t == current)
-			return mi;
-	return NULL;
-}
-
-static void mce_clear_info(struct mce_info *mi)
-{
-	atomic_set(&mi->inuse, 0);
-}
-
 /*
  * The actual machine check handler. This only handles real
  * exceptions when something got corrupted coming in through int 18.
@@ -1063,6 +1019,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 {
 	struct mca_config *cfg = &mca_cfg;
 	struct mce m, *final;
+	enum ctx_state prev_state;
 	int i;
 	int worst = 0;
 	int severity;
@@ -1084,6 +1041,10 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
 	DECLARE_BITMAP(valid_banks, MAX_NR_BANKS);
 	char *msg = "Unknown";
+	u64 recover_paddr = ~0ull;
+	int flags = MF_ACTION_REQUIRED;
+
+	prev_state = ist_enter(regs);
 
 	this_cpu_inc(mce_exception_count);
 
@@ -1203,9 +1164,9 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 		if (no_way_out)
 			mce_panic("Fatal machine check on current CPU", &m, msg);
 		if (worst == MCE_AR_SEVERITY) {
-			/* schedule action before return to userland */
-			mce_save_info(m.addr, m.mcgstatus & MCG_STATUS_RIPV);
-			set_thread_flag(TIF_MCE_NOTIFY);
+			recover_paddr = m.addr;
+			if (!(m.mcgstatus & MCG_STATUS_RIPV))
+				flags |= MF_MUST_KILL;
 		} else if (kill_it) {
 			force_sig(SIGBUS, current);
 		}
@@ -1216,6 +1177,27 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
 out:
 	sync_core();
+
+	if (recover_paddr == ~0ull)
+		goto done;
+
+	pr_err("Uncorrected hardware memory error in user-access at %llx",
+		 recover_paddr);
+	/*
+	 * We must call memory_failure() here even if the current process is
+	 * doomed. We still need to mark the page as poisoned and alert any
+	 * other users of the page.
+	 */
+	ist_begin_non_atomic(regs);
+	local_irq_enable();
+	if (memory_failure(recover_paddr >> PAGE_SHIFT, MCE_VECTOR, flags) < 0) {
+		pr_err("Memory error not recovered");
+		force_sig(SIGBUS, current);
+	}
+	local_irq_disable();
+	ist_end_non_atomic();
+done:
+	ist_exit(regs, prev_state);
 }
 EXPORT_SYMBOL_GPL(do_machine_check);
 
@@ -1232,42 +1214,6 @@ int memory_failure(unsigned long pfn, int vector, int flags)
 }
 #endif
 
-/*
- * Called in process context that interrupted by MCE and marked with
- * TIF_MCE_NOTIFY, just before returning to erroneous userland.
- * This code is allowed to sleep.
- * Attempt possible recovery such as calling the high level VM handler to
- * process any corrupted pages, and kill/signal current process if required.
- * Action required errors are handled here.
- */
-void mce_notify_process(void)
-{
-	unsigned long pfn;
-	struct mce_info *mi = mce_find_info();
-	int flags = MF_ACTION_REQUIRED;
-
-	if (!mi)
-		mce_panic("Lost physical address for unconsumed uncorrectable error", NULL, NULL);
-	pfn = mi->paddr >> PAGE_SHIFT;
-
-	clear_thread_flag(TIF_MCE_NOTIFY);
-
-	pr_err("Uncorrected hardware memory error in user-access at %llx",
-		 mi->paddr);
-	/*
-	 * We must call memory_failure() here even if the current process is
-	 * doomed. We still need to mark the page as poisoned and alert any
-	 * other users of the page.
-	 */
-	if (!mi->restartable)
-		flags |= MF_MUST_KILL;
-	if (memory_failure(pfn, MCE_VECTOR, flags) < 0) {
-		pr_err("Memory error not recovered");
-		force_sig(SIGBUS, current);
-	}
-	mce_clear_info(mi);
-}
-
 /*
  * Action optional processing happens here (picking up
  * from the list of faulting pages that do_machine_check()

arch/x86/kernel/cpu/mcheck/p5.c

@@ -8,6 +8,7 @@
 #include <linux/smp.h>
 
 #include <asm/processor.h>
+#include <asm/traps.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
 
@@ -17,8 +18,11 @@ int mce_p5_enabled __read_mostly;
 /* Machine check handler for Pentium class Intel CPUs: */
 static void pentium_machine_check(struct pt_regs *regs, long error_code)
 {
+	enum ctx_state prev_state;
 	u32 loaddr, hi, lotype;
 
+	prev_state = ist_enter(regs);
+
 	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
 	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
 
@@ -33,6 +37,8 @@ static void pentium_machine_check(struct pt_regs *regs, long error_code)
 	}
 
 	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
+
+	ist_exit(regs, prev_state);
 }
 
 /* Set up machine check reporting for processors with Intel style MCE: */

arch/x86/kernel/cpu/mcheck/winchip.c

@@ -7,14 +7,19 @@
 #include <linux/types.h>
 
 #include <asm/processor.h>
+#include <asm/traps.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
 
 /* Machine check handler for WinChip C6: */
 static void winchip_machine_check(struct pt_regs *regs, long error_code)
 {
+	enum ctx_state prev_state = ist_enter(regs);
+
 	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
 	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
+
+	ist_exit(regs, prev_state);
 }
 
 /* Set up machine check reporting on the Winchip C6 series */

arch/x86/kernel/entry_64.S

@@ -143,7 +143,8 @@ ENDPROC(native_usergs_sysret64)
 	movq \tmp,RSP+\offset(%rsp)
 	movq $__USER_DS,SS+\offset(%rsp)
 	movq $__USER_CS,CS+\offset(%rsp)
-	movq $-1,RCX+\offset(%rsp)
+	movq RIP+\offset(%rsp),\tmp  /* get rip */
+	movq \tmp,RCX+\offset(%rsp)  /* copy it to rcx as sysret would do */
 	movq R11+\offset(%rsp),\tmp  /* get eflags */
 	movq \tmp,EFLAGS+\offset(%rsp)
 	.endm
@@ -155,27 +156,6 @@ ENDPROC(native_usergs_sysret64)
 	movq \tmp,R11+\offset(%rsp)
 	.endm
 
-	.macro FAKE_STACK_FRAME child_rip
-	/* push in order ss, rsp, eflags, cs, rip */
-	xorl %eax, %eax
-	pushq_cfi $__KERNEL_DS /* ss */
-	/*CFI_REL_OFFSET	ss,0*/
-	pushq_cfi %rax /* rsp */
-	CFI_REL_OFFSET	rsp,0
-	pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) /* eflags - interrupts on */
-	/*CFI_REL_OFFSET	rflags,0*/
-	pushq_cfi $__KERNEL_CS /* cs */
-	/*CFI_REL_OFFSET	cs,0*/
-	pushq_cfi \child_rip /* rip */
-	CFI_REL_OFFSET	rip,0
-	pushq_cfi %rax /* orig rax */
-	.endm
-
-	.macro UNFAKE_STACK_FRAME
-	addq $8*6, %rsp
-	CFI_ADJUST_CFA_OFFSET	-(6*8)
-	.endm
-
 /*
  * initial frame state for interrupts (and exceptions without error code)
  */
@@ -238,51 +218,6 @@ ENDPROC(native_usergs_sysret64)
 	CFI_REL_OFFSET r15, R15+\offset
 	.endm
 
-/* save partial stack frame */
-	.macro SAVE_ARGS_IRQ
-	cld
-	/* start from rbp in pt_regs and jump over */
-	movq_cfi rdi, (RDI-RBP)
-	movq_cfi rsi, (RSI-RBP)
-	movq_cfi rdx, (RDX-RBP)
-	movq_cfi rcx, (RCX-RBP)
-	movq_cfi rax, (RAX-RBP)
-	movq_cfi  r8,  (R8-RBP)
-	movq_cfi  r9,  (R9-RBP)
-	movq_cfi r10, (R10-RBP)
-	movq_cfi r11, (R11-RBP)
-
-	/* Save rbp so that we can unwind from get_irq_regs() */
-	movq_cfi rbp, 0
-
-	/* Save previous stack value */
-	movq %rsp, %rsi
-
-	leaq -RBP(%rsp),%rdi	/* arg1 for handler */
-	testl $3, CS-RBP(%rsi)
-	je 1f
-	SWAPGS
-	/*
-	 * irq_count is used to check if a CPU is already on an interrupt stack
-	 * or not. While this is essentially redundant with preempt_count it is
-	 * a little cheaper to use a separate counter in the PDA (short of
-	 * moving irq_enter into assembly, which would be too much work)
-	 */
-1:	incl PER_CPU_VAR(irq_count)
-	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
-	CFI_DEF_CFA_REGISTER	rsi
-
-	/* Store previous stack value */
-	pushq %rsi
-	CFI_ESCAPE	0x0f /* DW_CFA_def_cfa_expression */, 6, \
-			0x77 /* DW_OP_breg7 */, 0, \
-			0x06 /* DW_OP_deref */, \
-			0x08 /* DW_OP_const1u */, SS+8-RBP, \
-			0x22 /* DW_OP_plus */
-	/* We entered an interrupt context - irqs are off: */
-	TRACE_IRQS_OFF
-	.endm
-
 ENTRY(save_paranoid)
 	XCPT_FRAME 1 RDI+8
 	cld
@@ -426,15 +361,12 @@ system_call_fastpath:
  * Has incomplete stack frame and undefined top of stack.
  */
 ret_from_sys_call:
-	movl $_TIF_ALLWORK_MASK,%edi
-	/* edi:	flagmask */
-sysret_check:
+	testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+	jnz int_ret_from_sys_call_fixup	/* Go the the slow path */
+
 	LOCKDEP_SYS_EXIT
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
-	movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx
-	andl %edi,%edx
-	jnz  sysret_careful
 	CFI_REMEMBER_STATE
 	/*
 	 * sysretq will re-enable interrupts:
@@ -448,49 +380,10 @@ sysret_check:
 	USERGS_SYSRET64
 
 	CFI_RESTORE_STATE
-	/* Handle reschedules */
-	/* edx:	work, edi: workmask */
-sysret_careful:
-	bt $TIF_NEED_RESCHED,%edx
-	jnc sysret_signal
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq_cfi %rdi
-	SCHEDULE_USER
-	popq_cfi %rdi
-	jmp sysret_check
 
-	/* Handle a signal */
-sysret_signal:
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-#ifdef CONFIG_AUDITSYSCALL
-	bt $TIF_SYSCALL_AUDIT,%edx
-	jc sysret_audit
-#endif
-	/*
-	 * We have a signal, or exit tracing or single-step.
-	 * These all wind up with the iret return path anyway,
-	 * so just join that path right now.
-	 */
+int_ret_from_sys_call_fixup:
 	FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
-	jmp int_check_syscall_exit_work
-
-#ifdef CONFIG_AUDITSYSCALL
-	/*
-	 * Return fast path for syscall audit.  Call __audit_syscall_exit()
-	 * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
-	 * masked off.
-	 */
-sysret_audit:
-	movq RAX-ARGOFFSET(%rsp),%rsi	/* second arg, syscall return value */
-	cmpq $-MAX_ERRNO,%rsi	/* is it < -MAX_ERRNO? */
-	setbe %al		/* 1 if so, 0 if not */
-	movzbl %al,%edi		/* zero-extend that into %edi */
-	call __audit_syscall_exit
-	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
-	jmp sysret_check
-#endif	/* CONFIG_AUDITSYSCALL */
+	jmp int_ret_from_sys_call
 
 	/* Do syscall tracing */
 tracesys:
@@ -626,19 +519,6 @@ END(\label)
 	FORK_LIKE  vfork
 	FIXED_FRAME stub_iopl, sys_iopl
 
-ENTRY(ptregscall_common)
-	DEFAULT_FRAME 1 8	/* offset 8: return address */
-	RESTORE_TOP_OF_STACK %r11, 8
-	movq_cfi_restore R15+8, r15
-	movq_cfi_restore R14+8, r14
-	movq_cfi_restore R13+8, r13
-	movq_cfi_restore R12+8, r12
-	movq_cfi_restore RBP+8, rbp
-	movq_cfi_restore RBX+8, rbx
-	ret $REST_SKIP		/* pop extended registers */
-	CFI_ENDPROC
-END(ptregscall_common)
-
 ENTRY(stub_execve)
 	CFI_STARTPROC
 	addq $8, %rsp
@@ -779,7 +659,48 @@ END(interrupt)
 	/* reserve pt_regs for scratch regs and rbp */
 	subq $ORIG_RAX-RBP, %rsp
 	CFI_ADJUST_CFA_OFFSET ORIG_RAX-RBP
-	SAVE_ARGS_IRQ
+	cld
+	/* start from rbp in pt_regs and jump over */
+	movq_cfi rdi, (RDI-RBP)
+	movq_cfi rsi, (RSI-RBP)
+	movq_cfi rdx, (RDX-RBP)
+	movq_cfi rcx, (RCX-RBP)
+	movq_cfi rax, (RAX-RBP)
+	movq_cfi  r8,  (R8-RBP)
+	movq_cfi  r9,  (R9-RBP)
+	movq_cfi r10, (R10-RBP)
+	movq_cfi r11, (R11-RBP)
+
+	/* Save rbp so that we can unwind from get_irq_regs() */
+	movq_cfi rbp, 0
+
+	/* Save previous stack value */
+	movq %rsp, %rsi
+
+	leaq -RBP(%rsp),%rdi	/* arg1 for handler */
+	testl $3, CS-RBP(%rsi)
+	je 1f
+	SWAPGS
+	/*
+	 * irq_count is used to check if a CPU is already on an interrupt stack
+	 * or not. While this is essentially redundant with preempt_count it is
+	 * a little cheaper to use a separate counter in the PDA (short of
+	 * moving irq_enter into assembly, which would be too much work)
+	 */
+1:	incl PER_CPU_VAR(irq_count)
+	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
+	CFI_DEF_CFA_REGISTER	rsi
+
+	/* Store previous stack value */
+	pushq %rsi
+	CFI_ESCAPE	0x0f /* DW_CFA_def_cfa_expression */, 6, \
+			0x77 /* DW_OP_breg7 */, 0, \
+			0x06 /* DW_OP_deref */, \
+			0x08 /* DW_OP_const1u */, SS+8-RBP, \
+			0x22 /* DW_OP_plus */
+	/* We entered an interrupt context - irqs are off: */
+	TRACE_IRQS_OFF
+
 	call \func
 	.endm
 
@@ -831,6 +752,60 @@ retint_swapgs:		/* return to user-space */
 	 */
 	DISABLE_INTERRUPTS(CLBR_ANY)
 	TRACE_IRQS_IRETQ
+
+	/*
+	 * Try to use SYSRET instead of IRET if we're returning to
+	 * a completely clean 64-bit userspace context.
+	 */
+	movq (RCX-R11)(%rsp), %rcx
+	cmpq %rcx,(RIP-R11)(%rsp)		/* RCX == RIP */
+	jne opportunistic_sysret_failed
+
+	/*
+	 * On Intel CPUs, sysret with non-canonical RCX/RIP will #GP
+	 * in kernel space.  This essentially lets the user take over
+	 * the kernel, since userspace controls RSP.  It's not worth
+	 * testing for canonicalness exactly -- this check detects any
+	 * of the 17 high bits set, which is true for non-canonical
+	 * or kernel addresses.  (This will pessimize vsyscall=native.
+	 * Big deal.)
+	 *
+	 * If virtual addresses ever become wider, this will need
+	 * to be updated to remain correct on both old and new CPUs.
+	 */
+	.ifne __VIRTUAL_MASK_SHIFT - 47
+	.error "virtual address width changed -- sysret checks need update"
+	.endif
+	shr $__VIRTUAL_MASK_SHIFT, %rcx
+	jnz opportunistic_sysret_failed
+
+	cmpq $__USER_CS,(CS-R11)(%rsp)		/* CS must match SYSRET */
+	jne opportunistic_sysret_failed
+
+	movq (R11-ARGOFFSET)(%rsp), %r11
+	cmpq %r11,(EFLAGS-ARGOFFSET)(%rsp)	/* R11 == RFLAGS */
+	jne opportunistic_sysret_failed
+
+	testq $X86_EFLAGS_RF,%r11		/* sysret can't restore RF */
+	jnz opportunistic_sysret_failed
+
+	/* nothing to check for RSP */
+
+	cmpq $__USER_DS,(SS-ARGOFFSET)(%rsp)	/* SS must match SYSRET */
+	jne opportunistic_sysret_failed
+
+	/*
+	 * We win!  This label is here just for ease of understanding
+	 * perf profiles.  Nothing jumps here.
+	 */
+irq_return_via_sysret:
+	CFI_REMEMBER_STATE
+	RESTORE_ARGS 1,8,1
+	movq (RSP-RIP)(%rsp),%rsp
+	USERGS_SYSRET64
+	CFI_RESTORE_STATE
+
+opportunistic_sysret_failed:
 	SWAPGS
 	jmp restore_args
 
@@ -1048,6 +1023,11 @@ ENTRY(\sym)
 	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 
 	.if \paranoid
+	.if \paranoid == 1
+	CFI_REMEMBER_STATE
+	testl $3, CS(%rsp)		/* If coming from userspace, switch */
+	jnz 1f				/* stacks. */
+	.endif
 	call save_paranoid
 	.else
 	call error_entry
@@ -1088,6 +1068,36 @@ ENTRY(\sym)
 	jmp error_exit			/* %ebx: no swapgs flag */
 	.endif
 
+	.if \paranoid == 1
+	CFI_RESTORE_STATE
+	/*
+	 * Paranoid entry from userspace.  Switch stacks and treat it
+	 * as a normal entry.  This means that paranoid handlers
+	 * run in real process context if user_mode(regs).
+	 */
+1:
+	call error_entry
+
+	DEFAULT_FRAME 0
+
+	movq %rsp,%rdi			/* pt_regs pointer */
+	call sync_regs
+	movq %rax,%rsp			/* switch stack */
+
+	movq %rsp,%rdi			/* pt_regs pointer */
+
+	.if \has_error_code
+	movq ORIG_RAX(%rsp),%rsi	/* get error code */
+	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
+	.else
+	xorl %esi,%esi			/* no error code */
+	.endif
+
+	call \do_sym
+
+	jmp error_exit			/* %ebx: no swapgs flag */
+	.endif
+
 	CFI_ENDPROC
 END(\sym)
 .endm
@@ -1108,7 +1118,7 @@ idtentry overflow do_overflow has_error_code=0
 idtentry bounds do_bounds has_error_code=0
 idtentry invalid_op do_invalid_op has_error_code=0
 idtentry device_not_available do_device_not_available has_error_code=0
-idtentry double_fault do_double_fault has_error_code=1 paranoid=1
+idtentry double_fault do_double_fault has_error_code=1 paranoid=2
 idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
 idtentry invalid_TSS do_invalid_TSS has_error_code=1
 idtentry segment_not_present do_segment_not_present has_error_code=1
@@ -1289,16 +1299,14 @@ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(
 #endif
 
 	/*
-	 * "Paranoid" exit path from exception stack.
-	 * Paranoid because this is used by NMIs and cannot take
-	 * any kernel state for granted.
-	 * We don't do kernel preemption checks here, because only
-	 * NMI should be common and it does not enable IRQs and
-	 * cannot get reschedule ticks.
+	 * "Paranoid" exit path from exception stack.  This is invoked
+	 * only on return from non-NMI IST interrupts that came
+	 * from kernel space.
 	 *
-	 * "trace" is 0 for the NMI handler only, because irq-tracing
-	 * is fundamentally NMI-unsafe. (we cannot change the soft and
-	 * hard flags at once, atomically)
+	 * We may be returning to very strange contexts (e.g. very early
+	 * in syscall entry), so checking for preemption here would
+	 * be complicated.  Fortunately, we there's no good reason
+	 * to try to handle preemption here.
 	 */
 
 	/* ebx:	no swapgs flag */
@@ -1308,43 +1316,14 @@ ENTRY(paranoid_exit)
 	TRACE_IRQS_OFF_DEBUG
 	testl %ebx,%ebx				/* swapgs needed? */
 	jnz paranoid_restore
-	testl $3,CS(%rsp)
-	jnz   paranoid_userspace
-paranoid_swapgs:
 	TRACE_IRQS_IRETQ 0
 	SWAPGS_UNSAFE_STACK
 	RESTORE_ALL 8
-	jmp irq_return
+	INTERRUPT_RETURN
 paranoid_restore:
 	TRACE_IRQS_IRETQ_DEBUG 0
 	RESTORE_ALL 8
-	jmp irq_return
-paranoid_userspace:
-	GET_THREAD_INFO(%rcx)
-	movl TI_flags(%rcx),%ebx
-	andl $_TIF_WORK_MASK,%ebx
-	jz paranoid_swapgs
-	movq %rsp,%rdi			/* &pt_regs */
-	call sync_regs
-	movq %rax,%rsp			/* switch stack for scheduling */
-	testl $_TIF_NEED_RESCHED,%ebx
-	jnz paranoid_schedule
-	movl %ebx,%edx			/* arg3: thread flags */
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	xorl %esi,%esi 			/* arg2: oldset */
-	movq %rsp,%rdi 			/* arg1: &pt_regs */
-	call do_notify_resume
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp paranoid_userspace
-paranoid_schedule:
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)
-	SCHEDULE_USER
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_OFF
-	jmp paranoid_userspace
+	INTERRUPT_RETURN
 	CFI_ENDPROC
 END(paranoid_exit)
 

arch/x86/kernel/irq_32.c

@@ -69,16 +69,9 @@ static void call_on_stack(void *func, void *stack)
 		     : "memory", "cc", "edx", "ecx", "eax");
 }
 
-/* how to get the current stack pointer from C */
-#define current_stack_pointer ({		\
-	unsigned long sp;			\
-	asm("mov %%esp,%0" : "=g" (sp));	\
-	sp;					\
-})
-
 static inline void *current_stack(void)
 {
-	return (void *)(current_stack_pointer & ~(THREAD_SIZE - 1));
+	return (void *)(current_stack_pointer() & ~(THREAD_SIZE - 1));
 }
 
 static inline int
@@ -103,7 +96,7 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
 
 	/* Save the next esp at the bottom of the stack */
 	prev_esp = (u32 *)irqstk;
-	*prev_esp = current_stack_pointer;
+	*prev_esp = current_stack_pointer();
 
 	if (unlikely(overflow))
 		call_on_stack(print_stack_overflow, isp);
@@ -156,7 +149,7 @@ void do_softirq_own_stack(void)
 
 	/* Push the previous esp onto the stack */
 	prev_esp = (u32 *)irqstk;
-	*prev_esp = current_stack_pointer;
+	*prev_esp = current_stack_pointer();
 
 	call_on_stack(__do_softirq, isp);
 }

arch/x86/kernel/signal.c

@@ -740,12 +740,6 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
 	user_exit();
 
-#ifdef CONFIG_X86_MCE
-	/* notify userspace of pending MCEs */
-	if (thread_info_flags & _TIF_MCE_NOTIFY)
-		mce_notify_process();
-#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
-
 	if (thread_info_flags & _TIF_UPROBE)
 		uprobe_notify_resume(regs);
 

arch/x86/kernel/traps.c

@@ -108,6 +108,88 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 	preempt_count_dec();
 }
 
+enum ctx_state ist_enter(struct pt_regs *regs)
+{
+	enum ctx_state prev_state;
+
+	if (user_mode_vm(regs)) {
+		/* Other than that, we're just an exception. */
+		prev_state = exception_enter();
+	} else {
+		/*
+		 * We might have interrupted pretty much anything.  In
+		 * fact, if we're a machine check, we can even interrupt
+		 * NMI processing.  We don't want in_nmi() to return true,
+		 * but we need to notify RCU.
+		 */
+		rcu_nmi_enter();
+		prev_state = IN_KERNEL;  /* the value is irrelevant. */
+	}
+
+	/*
+	 * We are atomic because we're on the IST stack (or we're on x86_32,
+	 * in which case we still shouldn't schedule).
+	 *
+	 * This must be after exception_enter(), because exception_enter()
+	 * won't do anything if in_interrupt() returns true.
+	 */
+	preempt_count_add(HARDIRQ_OFFSET);
+
+	/* This code is a bit fragile.  Test it. */
+	rcu_lockdep_assert(rcu_is_watching(), "ist_enter didn't work");
+
+	return prev_state;
+}
+
+void ist_exit(struct pt_regs *regs, enum ctx_state prev_state)
+{
+	/* Must be before exception_exit. */
+	preempt_count_sub(HARDIRQ_OFFSET);
+
+	if (user_mode_vm(regs))
+		return exception_exit(prev_state);
+	else
+		rcu_nmi_exit();
+}
+
+/**
+ * ist_begin_non_atomic() - begin a non-atomic section in an IST exception
+ * @regs:	regs passed to the IST exception handler
+ *
+ * IST exception handlers normally cannot schedule.  As a special
+ * exception, if the exception interrupted userspace code (i.e.
+ * user_mode_vm(regs) would return true) and the exception was not
+ * a double fault, it can be safe to schedule.  ist_begin_non_atomic()
+ * begins a non-atomic section within an ist_enter()/ist_exit() region.
+ * Callers are responsible for enabling interrupts themselves inside
+ * the non-atomic section, and callers must call is_end_non_atomic()
+ * before ist_exit().
+ */
+void ist_begin_non_atomic(struct pt_regs *regs)
+{
+	BUG_ON(!user_mode_vm(regs));
+
+	/*
+	 * Sanity check: we need to be on the normal thread stack.  This
+	 * will catch asm bugs and any attempt to use ist_preempt_enable
+	 * from double_fault.
+	 */
+	BUG_ON(((current_stack_pointer() ^ this_cpu_read_stable(kernel_stack))
+		& ~(THREAD_SIZE - 1)) != 0);
+
+	preempt_count_sub(HARDIRQ_OFFSET);
+}
+
+/**
+ * ist_end_non_atomic() - begin a non-atomic section in an IST exception
+ *
+ * Ends a non-atomic section started with ist_begin_non_atomic().
+ */
+void ist_end_non_atomic(void)
+{
+	preempt_count_add(HARDIRQ_OFFSET);
+}
+
 static nokprobe_inline int
 do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
 		  struct pt_regs *regs,	long error_code)
@@ -251,6 +333,8 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 	 * end up promoting it to a doublefault.  In that case, modify
 	 * the stack to make it look like we just entered the #GP
 	 * handler from user space, similar to bad_iret.
+	 *
+	 * No need for ist_enter here because we don't use RCU.
 	 */
 	if (((long)regs->sp >> PGDIR_SHIFT) == ESPFIX_PGD_ENTRY &&
 		regs->cs == __KERNEL_CS &&
@@ -263,12 +347,12 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
 		normal_regs->orig_ax = 0;  /* Missing (lost) #GP error code */
 		regs->ip = (unsigned long)general_protection;
 		regs->sp = (unsigned long)&normal_regs->orig_ax;
+
 		return;
 	}
 #endif
 
-	exception_enter();
-	/* Return not checked because double check cannot be ignored */
+	ist_enter(regs);  /* Discard prev_state because we won't return. */
 	notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);
 
 	tsk->thread.error_code = error_code;
@@ -434,7 +518,7 @@ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
 	if (poke_int3_handler(regs))
 		return;
 
-	prev_state = exception_enter();
+	prev_state = ist_enter(regs);
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
 	if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
 				SIGTRAP) == NOTIFY_STOP)
@@ -460,32 +544,19 @@ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
 	preempt_conditional_cli(regs);
 	debug_stack_usage_dec();
 exit:
-	exception_exit(prev_state);
+	ist_exit(regs, prev_state);
 }
 NOKPROBE_SYMBOL(do_int3);
 
 #ifdef CONFIG_X86_64
 /*
- * Help handler running on IST stack to switch back to user stack
- * for scheduling or signal handling. The actual stack switch is done in
- * entry.S
+ * Help handler running on IST stack to switch off the IST stack if the
+ * interrupted code was in user mode. The actual stack switch is done in
+ * entry_64.S
  */
 asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs)
 {
-	struct pt_regs *regs = eregs;
-	/* Did already sync */
-	if (eregs == (struct pt_regs *)eregs->sp)
-		;
-	/* Exception from user space */
-	else if (user_mode(eregs))
-		regs = task_pt_regs(current);
-	/*
-	 * Exception from kernel and interrupts are enabled. Move to
-	 * kernel process stack.
-	 */
-	else if (eregs->flags & X86_EFLAGS_IF)
-		regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
-	if (eregs != regs)
+	struct pt_regs *regs = task_pt_regs(current);
 	*regs = *eregs;
 	return regs;
 }
@@ -554,7 +625,7 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
 	unsigned long dr6;
 	int si_code;
 
-	prev_state = exception_enter();
+	prev_state = ist_enter(regs);
 
 	get_debugreg(dr6, 6);
 
@@ -629,7 +700,7 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
 	debug_stack_usage_dec();
 
 exit:
-	exception_exit(prev_state);
+	ist_exit(regs, prev_state);
 }
 NOKPROBE_SYMBOL(do_debug);
 

arch/x86/vdso/Makefile

@@ -205,4 +205,4 @@ $(vdso_img_insttargets): install_%: $(obj)/%.dbg $(MODLIB)/vdso FORCE
 PHONY += vdso_install $(vdso_img_insttargets)
 vdso_install: $(vdso_img_insttargets) FORCE
 
-clean-files := vdso32-syscall* vdso32-sysenter* vdso32-int80*
+clean-files := vdso32-syscall* vdso32-sysenter* vdso32-int80* vdso64*

kernel/rcu/tree.c

@@ -759,39 +759,71 @@ void rcu_irq_enter(void)
 /**
  * rcu_nmi_enter - inform RCU of entry to NMI context
  *
- * If the CPU was idle with dynamic ticks active, and there is no
- * irq handler running, this updates rdtp->dynticks_nmi to let the
- * RCU grace-period handling know that the CPU is active.
+ * If the CPU was idle from RCU's viewpoint, update rdtp->dynticks and
+ * rdtp->dynticks_nmi_nesting to let the RCU grace-period handling know
+ * that the CPU is active.  This implementation permits nested NMIs, as
+ * long as the nesting level does not overflow an int.  (You will probably
+ * run out of stack space first.)
  */
 void rcu_nmi_enter(void)
 {
 	struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
+	int incby = 2;
 
-	if (rdtp->dynticks_nmi_nesting == 0 &&
-	    (atomic_read(&rdtp->dynticks) & 0x1))
-		return;
-	rdtp->dynticks_nmi_nesting++;
+	/* Complain about underflow. */
+	WARN_ON_ONCE(rdtp->dynticks_nmi_nesting < 0);
+
+	/*
+	 * If idle from RCU viewpoint, atomically increment ->dynticks
+	 * to mark non-idle and increment ->dynticks_nmi_nesting by one.
+	 * Otherwise, increment ->dynticks_nmi_nesting by two.  This means
+	 * if ->dynticks_nmi_nesting is equal to one, we are guaranteed
+	 * to be in the outermost NMI handler that interrupted an RCU-idle
+	 * period (observation due to Andy Lutomirski).
+	 */
+	if (!(atomic_read(&rdtp->dynticks) & 0x1)) {
 		smp_mb__before_atomic();  /* Force delay from prior write. */
 		atomic_inc(&rdtp->dynticks);
-	/* CPUs seeing atomic_inc() must see later RCU read-side crit sects */
+		/* atomic_inc() before later RCU read-side crit sects */
 		smp_mb__after_atomic();  /* See above. */
 		WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
+		incby = 1;
+	}
+	rdtp->dynticks_nmi_nesting += incby;
+	barrier();
 }
 
 /**
  * rcu_nmi_exit - inform RCU of exit from NMI context
  *
- * If the CPU was idle with dynamic ticks active, and there is no
- * irq handler running, this updates rdtp->dynticks_nmi to let the
- * RCU grace-period handling know that the CPU is no longer active.
+ * If we are returning from the outermost NMI handler that interrupted an
+ * RCU-idle period, update rdtp->dynticks and rdtp->dynticks_nmi_nesting
+ * to let the RCU grace-period handling know that the CPU is back to
+ * being RCU-idle.
  */
 void rcu_nmi_exit(void)
 {
 	struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
 
-	if (rdtp->dynticks_nmi_nesting == 0 ||
-	    --rdtp->dynticks_nmi_nesting != 0)
+	/*
+	 * Check for ->dynticks_nmi_nesting underflow and bad ->dynticks.
+	 * (We are exiting an NMI handler, so RCU better be paying attention
+	 * to us!)
+	 */
+	WARN_ON_ONCE(rdtp->dynticks_nmi_nesting <= 0);
+	WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
+
+	/*
+	 * If the nesting level is not 1, the CPU wasn't RCU-idle, so
+	 * leave it in non-RCU-idle state.
+	 */
+	if (rdtp->dynticks_nmi_nesting != 1) {
+		rdtp->dynticks_nmi_nesting -= 2;
 		return;
+	}
+
+	/* This NMI interrupted an RCU-idle CPU, restore RCU-idleness. */
+	rdtp->dynticks_nmi_nesting = 0;
 	/* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */
 	smp_mb__before_atomic();  /* See above. */
 	atomic_inc(&rdtp->dynticks);