ARM: dove: multiplatform support

The dove platform is now ready to be enabled for multiplatform
support, this patch does the switch over by modifying the Kconfig file,
the defconfig and removing the last mach/*.h header that becomes obsolete
with this.

This work was originally done in 2015 as all the ARMv7 machiens
gove moved over to multiplatform builds, but at the time it conflicted
with some patches that Russell was trying to upstream, so we
left it at that.

I hope that there is no longer a need to keep dove separate from the
rest, so we can either add it to the other ARMv7 platforms, or just
replace it with the DT based platform code for the same hardware
in mach-mvebu and remove mach-dove entirely.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -383,20 +383,6 @@ config ARCH_IXP4XX
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_PJ4
-	select GPIOLIB
-	select HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	select SPARSE_IRQ
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	select ARCH_MTD_XIP

arch/arm/configs/dove_defconfig

@@ -8,6 +8,8 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y

arch/arm/mach-dove/Kconfig

 # SPDX-License-Identifier: GPL-2.0
-if ARCH_DOVE
+menuconfig ARCH_DOVE
+	bool "Marvell Dove" if ARCH_MULTI_V7
+	select CPU_PJ4
+	select GPIOLIB
+	select MVEBU_MBUS
+	select PINCTRL
+	select PINCTRL_DOVE
+	select PLAT_ORION_LEGACY
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  Support for the Marvell Dove SoC 88AP510
 
-menu "Marvell Dove Implementations"
+if ARCH_DOVE
 
 config DOVE_LEGACY
 	bool
@@ -21,6 +31,4 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-endmenu
-
 endif

arch/arm/mach-dove/Makefile

 # SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o

arch/arm/mach-dove/include/mach/uncompress.h

-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
-
-#define UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
-#define UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE	0x20
-
-static inline void putc(const char c)
-{
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		/* Transmit fifo not full? */
-		if (*UART_LSR & LSR_THRE)
-			break;
-	}
-
-	*UART_THR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()