powerpc/64: make buildable without CONFIG_COMPAT

There are numerous references to 32bit functions in generic and 64bit
code so ifdef them out.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e5619617020ef3a1f54f0c076e7d74cb9ec9f3bf.1584699455.git.msuchanek@suse.de

arch/powerpc/include/asm/thread_info.h

@@ -162,10 +162,10 @@ static inline bool test_thread_local_flags(unsigned int flags)
 	return (ti->local_flags & flags) != 0;
 }
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_COMPAT
 #define is_32bit_task()	(test_thread_flag(TIF_32BIT))
 #else
-#define is_32bit_task()	(1)
+#define is_32bit_task()	(IS_ENABLED(CONFIG_PPC32))
 #endif
 
 #if defined(CONFIG_PPC64)

arch/powerpc/kernel/Makefile

@@ -40,16 +40,17 @@ CFLAGS_btext.o += -DDISABLE_BRANCH_PROFILING
 endif
 
 obj-y				:= cputable.o syscalls.o \
-				   irq.o align.o signal_32.o pmc.o vdso.o \
+				   irq.o align.o signal_$(BITS).o pmc.o vdso.o \
 				   process.o systbl.o idle.o \
 				   signal.o sysfs.o cacheinfo.o time.o \
 				   prom.o traps.o setup-common.o \
 				   udbg.o misc.o io.o misc_$(BITS).o \
 				   of_platform.o prom_parse.o
 obj-y				+= ptrace/
-obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o signal_64.o \
+obj-$(CONFIG_PPC64)		+= setup_64.o \
 				   paca.o nvram_64.o firmware.o note.o \
 				   syscall_64.o
+obj-$(CONFIG_COMPAT)		+= sys_ppc32.o signal_32.o
 obj-$(CONFIG_VDSO32)		+= vdso32/
 obj-$(CONFIG_PPC_WATCHDOG)	+= watchdog.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o

arch/powerpc/kernel/entry_64.S

@@ -52,8 +52,10 @@
 SYS_CALL_TABLE:
 	.tc sys_call_table[TC],sys_call_table
 
+#ifdef CONFIG_COMPAT
 COMPAT_SYS_CALL_TABLE:
 	.tc compat_sys_call_table[TC],compat_sys_call_table
+#endif
 
 /* This value is used to mark exception frames on the stack. */
 exception_marker:

arch/powerpc/kernel/ptrace/Makefile

@@ -6,7 +6,7 @@
 CFLAGS_ptrace-view.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
 obj-y				+= ptrace.o ptrace-view.o
-obj-$(CONFIG_PPC64)		+= ptrace32.o
+obj-$(CONFIG_COMPAT)		+= ptrace32.o
 obj-$(CONFIG_VSX)		+= ptrace-vsx.o
 ifneq ($(CONFIG_VSX),y)
 obj-y				+= ptrace-novsx.o

arch/powerpc/kernel/signal.c

@@ -247,7 +247,6 @@ static void do_signal(struct task_struct *tsk)
 	sigset_t *oldset = sigmask_to_save();
 	struct ksignal ksig = { .sig = 0 };
 	int ret;
-	int is32 = is_32bit_task();
 
 	BUG_ON(tsk != current);
 
@@ -277,7 +276,7 @@ static void do_signal(struct task_struct *tsk)
 
 	rseq_signal_deliver(&ksig, tsk->thread.regs);
 
-	if (is32) {
+	if (is_32bit_task()) {
         	if (ksig.ka.sa.sa_flags & SA_SIGINFO)
 			ret = handle_rt_signal32(&ksig, oldset, tsk);
 		else

arch/powerpc/kernel/syscall_64.c

@@ -22,7 +22,6 @@ notrace long system_call_exception(long r3, long r4, long r5,
 				   long r6, long r7, long r8,
 				   unsigned long r0, struct pt_regs *regs)
 {
-	unsigned long ti_flags;
 	syscall_fn f;
 
 	if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
@@ -60,8 +59,7 @@ notrace long system_call_exception(long r3, long r4, long r5,
 
 	local_irq_enable();
 
-	ti_flags = current_thread_info()->flags;
-	if (unlikely(ti_flags & _TIF_SYSCALL_DOTRACE)) {
+	if (unlikely(current_thread_info()->flags & _TIF_SYSCALL_DOTRACE)) {
 		/*
 		 * We use the return value of do_syscall_trace_enter() as the
 		 * syscall number. If the syscall was rejected for any reason
@@ -86,7 +84,7 @@ notrace long system_call_exception(long r3, long r4, long r5,
 	/* May be faster to do array_index_nospec? */
 	barrier_nospec();
 
-	if (unlikely(ti_flags & _TIF_32BIT)) {
+	if (unlikely(is_32bit_task())) {
 		f = (void *)compat_sys_call_table[r0];
 
 		r3 &= 0x00000000ffffffffULL;

arch/powerpc/kernel/vdso.c

@@ -651,7 +651,8 @@ static void __init vdso_setup_syscall_map(void)
 		if (sys_call_table[i] != sys_ni_syscall)
 			vdso_data->syscall_map_64[i >> 5] |=
 				0x80000000UL >> (i & 0x1f);
-		if (compat_sys_call_table[i] != sys_ni_syscall)
+		if (IS_ENABLED(CONFIG_COMPAT) &&
+		    compat_sys_call_table[i] != sys_ni_syscall)
 			vdso_data->syscall_map_32[i >> 5] |=
 				0x80000000UL >> (i & 0x1f);
 #else /* CONFIG_PPC64 */

arch/powerpc/perf/callchain.c

@@ -15,7 +15,7 @@
 #include <asm/sigcontext.h>
 #include <asm/ucontext.h>
 #include <asm/vdso.h>
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_COMPAT
 #include "../kernel/ppc32.h"
 #endif
 #include <asm/pte-walk.h>
@@ -284,6 +284,7 @@ static inline void perf_callchain_user_64(struct perf_callchain_entry_ctx *entry
 
 #endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_PPC32) || defined(CONFIG_COMPAT)
 /*
  * On 32-bit we just access the address and let hash_page create a
  * HPTE if necessary, so there is no need to fall back to reading
@@ -447,6 +448,11 @@ static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,
 		sp = next_sp;
 	}
 }
+#else /* 32bit */
+static void perf_callchain_user_32(struct perf_callchain_entry_ctx *entry,
+				   struct pt_regs *regs)
+{}
+#endif /* 32bit */
 
 void
 perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)