Commit 0a831cec authored by Russell King's avatar Russell King

Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable

parents 5b88128f b9214b97
......@@ -363,7 +363,7 @@ config ARCH_MXS
bool "Freescale MXS-based"
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLKDEV
select CLKDEV_LOOKUP
help
Support for Freescale MXS-based family of processors
......
......@@ -243,6 +243,7 @@ config MACH_MX27_3DS
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
select MXC_ULPI if USB_ULPI
help
Include support for MX27PDK platform. This includes specific
......
......@@ -37,12 +37,15 @@
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/ulpi.h>
#include <mach/irqs.h>
#include <mach/3ds_debugboard.h>
#include "devices-imx27.h"
#define SD1_EN_GPIO (GPIO_PORTB + 25)
#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
#define SPI2_SS0 (GPIO_PORTD + 21)
#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTC + 28)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
......@@ -215,10 +218,10 @@ static struct regulator_init_data vgen_init = {
static struct mc13783_regulator_init_data mx27_3ds_regulators[] = {
{
.id = MC13783_REGU_VMMC1,
.id = MC13783_REG_VMMC1,
.init_data = &vmmc1_init,
}, {
.id = MC13783_REGU_VGEN,
.id = MC13783_REG_VGEN,
.init_data = &vgen_init,
},
};
......@@ -276,6 +279,9 @@ static void __init mx27pdk_init(void)
imx27_add_spi_imx1(&spi2_pdata);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
}
static void __init mx27pdk_timer_init(void)
......
......@@ -147,10 +147,10 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
.init_data = &pwgtx_init,
}, {
.id = MC13783_REGU_GPO1, /* Turn on 1.8V */
.id = MC13783_REG_GPO1, /* Turn on 1.8V */
.init_data = &gpo_init,
}, {
.id = MC13783_REGU_GPO3, /* Turn on 3.3V */
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
.init_data = &gpo_init,
},
};
......
......@@ -50,6 +50,7 @@ config MACH_MX51_BABBAGE
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
......@@ -77,6 +78,7 @@ choice
config MACH_EUKREA_MBIMX51_BASEBOARD
prompt "Eukrea MBIMX51 development board"
bool
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
This adds board specific devices that can be found on Eukrea's
......@@ -124,10 +126,28 @@ config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX53 EVK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_SMD
bool "Support MX53 SMD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX53 SMD platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_LOCO
bool "Support MX53 LOCO platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX_UART
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
......
......@@ -10,6 +10,8 @@ obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
......
......@@ -12,7 +12,6 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
......@@ -120,14 +119,14 @@ static int mx51_3ds_board_keymap[] = {
KEY(3, 5, KEY_BACK)
};
static struct matrix_keymap_data mx51_3ds_map_data = {
static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
.keymap = mx51_3ds_board_keymap,
.keymap_size = ARRAY_SIZE(mx51_3ds_board_keymap),
};
static void mxc_init_keypad(void)
{
mxc_register_device(&mxc_keypad_device, &mx51_3ds_map_data);
imx51_add_imx_keypad(&mx51_3ds_map_data);
}
#else
static inline void mxc_init_keypad(void)
......
......@@ -21,6 +21,11 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -29,6 +34,10 @@
#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30)
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
#include "crm_regs.h"
#include "devices-imx53.h"
......@@ -47,6 +56,14 @@ static iomux_v3_cfg_t mx53_evk_pads[] = {
MX53_PAD_ATA_CS_1__UART3_RXD,
MX53_PAD_ATA_DA_1__UART3_CTS,
MX53_PAD_ATA_DA_2__UART3_RTS,
MX53_PAD_EIM_D16__CSPI1_SCLK,
MX53_PAD_EIM_D17__CSPI1_MISO,
MX53_PAD_EIM_D18__CSPI1_MOSI,
/* ecspi chip select lines */
MX53_PAD_EIM_EB2__GPIO_2_30,
MX53_PAD_EIM_D19__GPIO_3_19,
};
static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
......@@ -60,11 +77,68 @@ static inline void mx53_evk_init_uart(void)
imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
}
static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
.bitrate = 100000,
};
static inline void mx53_evk_fec_reset(void)
{
int ret;
/* reset FEC PHY */
ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
gpio_direction_output(SMD_FEC_PHY_RST, 0);
gpio_set_value(SMD_FEC_PHY_RST, 0);
msleep(1);
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_evk_fec_pdata = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
{
.modalias = "mtd_dataflash",
.max_speed_hz = 25000000,
.bus_num = 0,
.chip_select = 1,
.mode = SPI_MODE_0,
.platform_data = NULL,
},
};
static int mx53_evk_spi_cs[] = {
EVK_ECSPI1_CS0,
EVK_ECSPI1_CS1,
};
static const struct spi_imx_master mx53_evk_spi_data __initconst = {
.chipselect = mx53_evk_spi_cs,
.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
};
static void __init mx53_evk_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
mx53_evk_fec_reset();
imx53_add_fec(&mx53_evk_fec_pdata);
imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(1, NULL);
spi_register_board_info(mx53_evk_spi_board_info,
ARRAY_SIZE(mx53_evk_spi_board_info));
imx53_add_ecspi(0, &mx53_evk_spi_data);
}
static void __init mx53_evk_timer_init(void)
......
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "crm_regs.h"
#include "devices-imx53.h"
#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6)
static iomux_v3_cfg_t mx53_loco_pads[] = {
MX53_PAD_CSI0_D10__UART1_TXD,
MX53_PAD_CSI0_D11__UART1_RXD,
MX53_PAD_ATA_DIOW__UART1_TXD,
MX53_PAD_ATA_DMACK__UART1_RXD,
MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
MX53_PAD_ATA_DMARQ__UART2_TXD,
MX53_PAD_ATA_DIOR__UART2_RTS,
MX53_PAD_ATA_INTRQ__UART2_CTS,
MX53_PAD_ATA_CS_0__UART3_TXD,
MX53_PAD_ATA_CS_1__UART3_RXD,
MX53_PAD_ATA_DA_1__UART3_CTS,
MX53_PAD_ATA_DA_2__UART3_RTS,
};
static const struct imxuart_platform_data mx53_loco_uart_data __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mx53_loco_init_uart(void)
{
imx53_add_imx_uart(0, &mx53_loco_uart_data);
imx53_add_imx_uart(1, &mx53_loco_uart_data);
imx53_add_imx_uart(2, &mx53_loco_uart_data);
}
static inline void mx53_loco_fec_reset(void)
{
int ret;
/* reset FEC PHY */
ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
gpio_direction_output(LOCO_FEC_PHY_RST, 0);
msleep(1);
gpio_set_value(LOCO_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_loco_fec_data = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static void __init mx53_loco_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
ARRAY_SIZE(mx53_loco_pads));
mx53_loco_init_uart();
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
}
static void __init mx53_loco_timer_init(void)
{
mx53_clocks_init(32768, 24000000, 0, 0);
}
static struct sys_timer mx53_loco_timer = {
.init = mx53_loco_timer_init,
};
MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
.map_io = mx53_map_io,
.init_irq = mx53_init_irq,
.init_machine = mx53_loco_board_init,
.timer = &mx53_loco_timer,
MACHINE_END
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/fec.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx53.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "crm_regs.h"
#include "devices-imx53.h"
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
static iomux_v3_cfg_t mx53_smd_pads[] = {
MX53_PAD_CSI0_D10__UART1_TXD,
MX53_PAD_CSI0_D11__UART1_RXD,
MX53_PAD_ATA_DIOW__UART1_TXD,
MX53_PAD_ATA_DMACK__UART1_RXD,
MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
MX53_PAD_ATA_DMARQ__UART2_TXD,
MX53_PAD_ATA_DIOR__UART2_RTS,
MX53_PAD_ATA_INTRQ__UART2_CTS,
MX53_PAD_ATA_CS_0__UART3_TXD,
MX53_PAD_ATA_CS_1__UART3_RXD,
MX53_PAD_ATA_DA_1__UART3_CTS,
MX53_PAD_ATA_DA_2__UART3_RTS,
};
static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mx53_smd_init_uart(void)
{
imx53_add_imx_uart(0, &mx53_smd_uart_data);
imx53_add_imx_uart(1, &mx53_smd_uart_data);
imx53_add_imx_uart(2, &mx53_smd_uart_data);
}
static inline void mx53_smd_fec_reset(void)
{
int ret;
/* reset FEC PHY */
ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
if (ret) {
printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
return;
}
gpio_direction_output(SMD_FEC_PHY_RST, 0);
msleep(1);
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
static struct fec_platform_data mx53_smd_fec_data = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static void __init mx53_smd_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
ARRAY_SIZE(mx53_smd_pads));
mx53_smd_init_uart();
mx53_smd_fec_reset();
imx53_add_fec(&mx53_smd_fec_data);
}
static void __init mx53_smd_timer_init(void)
{
mx53_clocks_init(32768, 24000000, 22579200, 0);
}
static struct sys_timer mx53_smd_timer = {
.init = mx53_smd_timer_init,
};
MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
.map_io = mx53_map_io,
.init_irq = mx53_init_irq,
.init_machine = mx53_smd_board_init,
.timer = &mx53_smd_timer,
MACHINE_END
......@@ -1191,6 +1191,11 @@ DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
NULL, NULL, &ipg_clk, &gpt_ipg_clk);
DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &ipg_clk, NULL);
DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
NULL, NULL, &ipg_clk, NULL);
/* I2C */
DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
NULL, NULL, &ipg_clk, NULL);
......@@ -1283,6 +1288,8 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
......@@ -1295,7 +1302,7 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
_REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
......@@ -1326,6 +1333,13 @@ static struct clk_lookup mx53_lookups[] = {
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
_REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk)
_REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk)
_REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk)
};
static void clk_tree_init(void)
......@@ -1363,7 +1377,6 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
clk_tree_init();
clk_set_parent(&uart_root_clk, &pll3_sw_clk);
clk_enable(&cpu_clk);
clk_enable(&main_bus_clk);
......@@ -1406,6 +1419,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
clk_tree_init();
clk_set_parent(&uart_root_clk, &pll3_sw_clk);
clk_enable(&cpu_clk);
clk_enable(&main_bus_clk);
......
......@@ -47,3 +47,11 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
#define imx51_add_imx2_wdt(id, pdata) \
imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst;
#define imx51_add_mxc_pwm(id) \
imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
extern const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst;
#define imx51_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
......@@ -8,6 +8,24 @@
#include <mach/mx53.h>
#include <mach/devices-common.h>
extern const struct imx_fec_data imx53_fec_data __initconst;
#define imx53_add_fec(pdata) \
imx_add_fec(&imx53_fec_data, pdata)
extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst;
#define imx53_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
extern const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst;
#define imx53_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
extern const struct imx_sdhci_esdhc_imx_data
imx53_sdhci_esdhc_imx_data[] __initconst;
#define imx53_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
extern const struct imx_spi_imx_data imx53_ecspi_data[] __initconst;
#define imx53_add_ecspi(id, pdata) \
imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
......@@ -120,25 +120,6 @@ struct platform_device mxc_usbh2_device = {
},
};
static struct resource mxc_kpp_resources[] = {
{
.start = MX51_MXC_INT_KPP,
.end = MX51_MXC_INT_KPP,
.flags = IORESOURCE_IRQ,
} , {
.start = MX51_KPP_BASE_ADDR,
.end = MX51_KPP_BASE_ADDR + 0x8 - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device mxc_keypad_device = {
.name = "imx-keypad",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_kpp_resources),
.resource = mxc_kpp_resources,
};
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
......
......@@ -3,4 +3,3 @@ extern struct platform_device mxc_usbh1_device;
extern struct platform_device mxc_usbh2_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_hsi2c_device;
extern struct platform_device mxc_keypad_device;
......@@ -21,7 +21,6 @@
#include <linux/fsl_devices.h>
#include <linux/i2c/tsc2007.h>
#include <linux/leds.h>
#include <linux/input/matrix_keypad.h>
#include <mach/common.h>
#include <mach/hardware.h>
......@@ -157,7 +156,7 @@ static int mbimx51_keymap[] = {
KEY(3, 3, KEY_ENTER),
};
static struct matrix_keymap_data mbimx51_map_data = {
static const struct matrix_keymap_data mbimx51_map_data __initconst = {
.keymap = mbimx51_keymap,
.keymap_size = ARRAY_SIZE(mbimx51_keymap),
};
......@@ -209,7 +208,7 @@ void __init eukrea_mbimx51_baseboard_init(void)
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_keypad_device, &mbimx51_map_data);
imx51_add_imx_keypad(&mbimx51_map_data);
gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
gpio_direction_input(MBIMX51_TSC2007_GPIO);
......
......@@ -15,7 +15,7 @@ comment "MXS platforms:"
config MACH_MX23EVK
bool "Support MX23EVK Platform"
select SOC_IMX23
select MXS_HAVE_PLATFORM_DUART
select MXS_HAVE_AMBA_DUART
default y
help
Include support for MX23EVK platform. This includes specific
......@@ -24,7 +24,7 @@ config MACH_MX23EVK
config MACH_MX28EVK
bool "Support MX28EVK Platform"
select SOC_IMX28
select MXS_HAVE_PLATFORM_DUART
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_FEC
default y
help
......
......@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/clkdev.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
......@@ -437,10 +438,12 @@ _DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
},
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk)
/* for amba bus driver */
_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
/* for amba-pl011 driver */
_REGISTER_CLOCK("duart", NULL, uart_clk)
_REGISTER_CLOCK("rtc", NULL, rtc_clk)
_REGISTER_CLOCK(NULL, "hclk", hbus_clk)
_REGISTER_CLOCK(NULL, "xclk", xbus_clk)
_REGISTER_CLOCK(NULL, "usb", usb_clk)
_REGISTER_CLOCK(NULL, "audio", audio_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
......@@ -518,6 +521,12 @@ int __init mx23_clocks_init(void)
{
clk_misc_init();
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
clk_enable(&emi_clk);
clk_enable(&uart_clk);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
......
......@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/clkdev.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
......@@ -602,7 +603,12 @@ _DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk);
},
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk)
/* for amba bus driver */
_REGISTER_CLOCK("duart", "apb_pclk", xbus_clk)
/* for amba-pl011 driver */
_REGISTER_CLOCK("duart", NULL, uart_clk)
_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("rtc", NULL, rtc_clk)
_REGISTER_CLOCK("pll2", NULL, pll2_clk)
......@@ -726,6 +732,12 @@ int __init mx28_clocks_init(void)
{
clk_misc_init();
clk_enable(&cpu_clk);
clk_enable(&hbus_clk);
clk_enable(&xbus_clk);
clk_enable(&emi_clk);
clk_enable(&uart_clk);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
......
......@@ -11,6 +11,6 @@
#include <mach/mx23.h>
#include <mach/devices-common.h>
extern const struct mxs_duart_data mx23_duart_data __initconst;
extern const struct amba_device mx23_duart_device __initconst;
#define mx23_add_duart() \
mxs_add_duart(&mx23_duart_data)
mxs_add_duart(&mx23_duart_device)
......@@ -11,9 +11,9 @@
#include <mach/mx28.h>
#include <mach/devices-common.h>
extern const struct mxs_duart_data mx28_duart_data __initconst;
extern const struct amba_device mx28_duart_device __initconst;
#define mx28_add_duart() \
mxs_add_duart(&mx28_duart_data)
mxs_add_duart(&mx28_duart_device)
extern const struct mxs_fec_data mx28_fec_data[] __initconst;
#define mx28_add_fec(id, pdata) \
......
......@@ -19,9 +19,8 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <mach/common.h>
#include <linux/amba/bus.h>
struct platform_device *__init mxs_add_platform_device_dmamask(
const char *name, int id,
......@@ -73,3 +72,17 @@ struct platform_device *__init mxs_add_platform_device_dmamask(
return pdev;
}
int __init mxs_add_amba_device(const struct amba_device *dev)
{
struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
if (!adev) {
pr_err("%s: failed to allocate memory", __func__);
return -ENOMEM;
}
*adev = *dev;
return amba_device_register(adev, &iomem_resource);
}
config MXS_HAVE_PLATFORM_DUART
config MXS_HAVE_AMBA_DUART
bool
select ARM_AMBA
config MXS_HAVE_PLATFORM_FEC
bool
obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o
obj-$(CONFIG_MXS_HAVE_AMBA_DUART) += amba-duart.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
......@@ -8,41 +8,33 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/irq.h>
#include <mach/mx23.h>
#include <mach/mx28.h>
#include <mach/devices-common.h>
#define mxs_duart_data_entry(soc) \
{ \
.iobase = soc ## _DUART_BASE_ADDR, \
.irq = soc ## _INT_DUART, \
}
#define MXS_AMBA_DUART_DEVICE(name, soc) \
const struct amba_device name##_device __initconst = { \
.dev = { \
.init_name = "duart", \
}, \
.res = { \
.start = soc ## _DUART_BASE_ADDR, \
.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \
.flags = IORESOURCE_MEM, \
}, \
.irq = {soc ## _INT_DUART, NO_IRQ}, \
}
#ifdef CONFIG_SOC_IMX23
const struct mxs_duart_data mx23_duart_data __initconst =
mxs_duart_data_entry(MX23);
MXS_AMBA_DUART_DEVICE(mx23_duart, MX23);
#endif
#ifdef CONFIG_SOC_IMX28
const struct mxs_duart_data mx28_duart_data __initconst =
mxs_duart_data_entry(MX28);
MXS_AMBA_DUART_DEVICE(mx28_duart, MX28);
#endif
struct platform_device *__init mxs_add_duart(
const struct mxs_duart_data *data)
int __init mxs_add_duart(const struct amba_device *dev)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_8K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res),
NULL, 0);
return mxs_add_amba_device(dev);
}
......@@ -45,6 +45,6 @@ struct platform_device *__init mxs_add_fec(
},
};
return mxs_add_platform_device("fec", data->id,
return mxs_add_platform_device("imx28-fec", data->id,
res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
......@@ -9,6 +9,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/amba/bus.h>
struct platform_device *mxs_add_platform_device_dmamask(
const char *name, int id,
......@@ -24,14 +25,10 @@ static inline struct platform_device *mxs_add_platform_device(
name, id, res, num_resources, data, size_data, 0);
}
int __init mxs_add_amba_device(const struct amba_device *dev);
/* duart */
struct mxs_duart_data {
resource_size_t iobase;
resource_size_t iosize;
resource_size_t irq;
};
struct platform_device *__init mxs_add_duart(
const struct mxs_duart_data *data);
int __init mxs_add_duart(const struct amba_device *dev);
/* fec */
#include <linux/fec.h>
......
......@@ -57,6 +57,19 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET_CLK__CLKCTRL_ENET |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
/* fec1 */
MX28_PAD_ENET0_CRS__ENET1_RX_EN |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_RXD2__ENET1_RXD0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_RXD3__ENET1_RXD1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_COL__ENET1_TX_EN |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_TXD2__ENET1_TXD0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_TXD3__ENET1_TXD1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
/* phy power line */
MX28_PAD_SSP1_DATA3__GPIO_2_15 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
......@@ -106,8 +119,14 @@ static void __init mx28evk_fec_reset(void)
gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
}
static const struct fec_platform_data mx28_fec_pdata __initconst = {
static struct fec_platform_data mx28_fec_pdata[] = {
{
/* fec0 */
.phy = PHY_INTERFACE_MODE_RMII,
}, {
/* fec1 */
.phy = PHY_INTERFACE_MODE_RMII,
},
};
static void __init mx28evk_init(void)
......@@ -117,7 +136,8 @@ static void __init mx28evk_init(void)
mx28_add_duart();
mx28evk_fec_reset();
mx28_add_fec(0, &mx28_fec_pdata);
mx28_add_fec(0, &mx28_fec_pdata[0]);
mx28_add_fec(1, &mx28_fec_pdata[1]);
}
static void __init mx28evk_timer_init(void)
......
config IMX_HAVE_PLATFORM_FEC
bool
default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51
default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
config IMX_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
......
......@@ -36,6 +36,11 @@ const struct imx_fec_data imx51_fec_data __initconst =
imx_fec_data_entry_single(MX51);
#endif
#ifdef CONFIG_SOC_IMX53
const struct imx_fec_data imx53_fec_data __initconst =
imx_fec_data_entry_single(MX53);
#endif
struct platform_device *__init imx_add_fec(
const struct imx_fec_data *data,
const struct fec_platform_data *pdata)
......
......@@ -78,6 +78,15 @@ const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX51 */
#ifdef CONFIG_SOC_IMX53
const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = {
#define imx53_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K)
imx53_imx_i2c_data_entry(0, 1),
imx53_imx_i2c_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX51 */
struct platform_device *__init imx_add_imx_i2c(
const struct imx_imx_i2c_data *data,
const struct imxi2c_platform_data *pdata)
......
......@@ -41,6 +41,11 @@ const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX35, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX51, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX51 */
struct platform_device *__init imx_add_imx_keypad(
const struct imx_imx_keypad_data *data,
const struct matrix_keymap_data *pdata)
......
......@@ -40,6 +40,15 @@ const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX51
const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = {
#define imx51_mxc_pwm_data_entry(_id, _hwid) \
imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K)
imx51_mxc_pwm_data_entry(0, 1),
imx51_mxc_pwm_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX51 */
struct platform_device *__init imx_add_mxc_pwm(
const struct imx_mxc_pwm_data *data)
{
......
......@@ -53,6 +53,18 @@ imx51_sdhci_esdhc_imx_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX51 */
#ifdef CONFIG_SOC_IMX53
const struct imx_sdhci_esdhc_imx_data
imx53_sdhci_esdhc_imx_data[] __initconst = {
#define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid) \
imx_sdhci_esdhc_imx_data_entry(MX53, _id, _hwid)
imx53_sdhci_esdhc_imx_data_entry(0, 1),
imx53_sdhci_esdhc_imx_data_entry(1, 2),
imx53_sdhci_esdhc_imx_data_entry(2, 3),
imx53_sdhci_esdhc_imx_data_entry(3, 4),
};
#endif /* ifdef CONFIG_SOC_IMX53 */
struct platform_device *__init imx_add_sdhci_esdhc_imx(
const struct imx_sdhci_esdhc_imx_data *data,
const struct esdhc_platform_data *pdata)
......
......@@ -81,6 +81,18 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX51 */
#ifdef CONFIG_SOC_IMX53
const struct imx_spi_imx_data imx53_cspi_data __initconst =
imx_spi_imx_data_entry_single(MX53, CSPI, "imx53-cspi", 0, , SZ_4K);
const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = {
#define imx53_ecspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX53, ECSPI, "imx53-ecspi", _id, _hwid, SZ_4K)
imx53_ecspi_data_entry(0, 1),
imx53_ecspi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX53 */
struct platform_device *__init imx_add_spi_imx(
const struct imx_spi_imx_data *data,
const struct spi_imx_master *pdata)
......
......@@ -34,7 +34,6 @@ typedef enum iomux_config {
IOMUX_CONFIG_ALT6,
IOMUX_CONFIG_ALT7,
IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
} iomux_pin_cfg_t;
/* These 2 defines are for pins that may not have a mux register, but could
......@@ -135,6 +134,9 @@ typedef enum iomux_config {
#define MX53_PAD_EIM_D16__GPIO_3_16 IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D17__GPIO_3_17 IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D18__GPIO_3_18 IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D16__CSPI1_SCLK IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT4, 0x79c, 3, NO_PAD_CTRL)
#define MX53_PAD_EIM_D17__CSPI1_MISO IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT4, 0x7a0, 3, NO_PAD_CTRL)
#define MX53_PAD_EIM_D18__CSPI1_MOSI IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT4, 0x7a4, 3, NO_PAD_CTRL)
#define MX53_PAD_EIM_D19__GPIO_3_19 IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D20__GPIO_3_20 IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D21__GPIO_3_21 IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
......
......@@ -105,6 +105,7 @@ typedef u64 iomux_v3_cfg_t;
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
#define IOMUX_CONFIG_SION (0x1 << 4)
#define MX51_NUM_GPIO_PORT 4
......
......@@ -301,8 +301,8 @@
#define MX51_MXC_INT_GPIO4_HIGH 57
#define MX51_MXC_INT_WDOG1 58
#define MX51_MXC_INT_WDOG2 59
#define MX51_MXC_INT_KPP 60
#define MX51_MXC_INT_PWM1 61
#define MX51_INT_KPP 60
#define MX51_INT_PWM1 61
#define MX51_INT_I2C1 62
#define MX51_INT_I2C2 63
#define MX51_MXC_INT_HS_I2C 64
......@@ -335,7 +335,7 @@
#define MX51_MXC_INT_SPDIF 91
#define MX51_MXC_INT_TVE 92
#define MX51_MXC_INT_FIRI 93
#define MX51_MXC_INT_PWM2 94
#define MX51_INT_PWM2 94
#define MX51_MXC_INT_SLIM_EXP 95
#define MX51_INT_SSI3 96
#define MX51_MXC_INT_EMI_BOOT 97
......
......@@ -53,13 +53,13 @@
#define MX53_SPBA0_BASE_ADDR 0x50000000
#define MX53_SPBA0_SIZE SZ_1M
#define MX53_MMC_SDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000)
#define MX53_MMC_SDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000)
#define MX53_ESDHC1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00004000)
#define MX53_ESDHC2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00008000)
#define MX53_UART3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0000C000)
#define MX53_CSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000)
#define MX53_ECSPI1_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00010000)
#define MX53_SSI2_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00014000)
#define MX53_MMC_SDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000)
#define MX53_MMC_SDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000)
#define MX53_ESDHC3_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00020000)
#define MX53_ESDHC4_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00024000)
#define MX53_SPDIF_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00028000)
#define MX53_ASRC_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x0002C000)
#define MX53_ATA_DMA_BASE_ADDR (MX53_SPBA0_BASE_ADDR + 0x00030000)
......@@ -117,12 +117,12 @@
#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000)
#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000)
#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000)
#define MX53_CSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
#define MX53_ECSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000)
#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000)
#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000)
#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000)
#define MX53_CSPI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
#define MX53_CSPI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000)
#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000)
#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000)
......@@ -136,7 +136,7 @@
#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000)
#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000)
#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000)
#define MX53_MXC_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
#define MX53_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000)
#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000)
#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000)
......@@ -229,10 +229,10 @@
* Interrupt numbers
*/
#define MX53_INT_RESV0 0
#define MX53_INT_MMC_SDHC1 1
#define MX53_INT_MMC_SDHC2 2
#define MX53_INT_MMC_SDHC3 3
#define MX53_INT_MMC_SDHC4 4
#define MX53_INT_ESDHC1 1
#define MX53_INT_ESDHC2 2
#define MX53_INT_ESDHC3 3
#define MX53_INT_ESDHC4 4
#define MX53_INT_RESV5 5
#define MX53_INT_SDMA 6
#define MX53_INT_IOMUX 7
......@@ -264,8 +264,8 @@
#define MX53_INT_UART3 33
#define MX53_INT_RESV34 34
#define MX53_INT_RESV35 35
#define MX53_INT_CSPI1 36
#define MX53_INT_CSPI2 37
#define MX53_INT_ECSPI1 36
#define MX53_INT_ECSPI2 37
#define MX53_INT_CSPI 38
#define MX53_INT_GPT 39
#define MX53_INT_EPIT1 40
......
......@@ -57,7 +57,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
u32 cr;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment