Commit 0b1fc9b8 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart

parents 6bd25e78 b41c82eb
...@@ -15,22 +15,23 @@ config AGP ...@@ -15,22 +15,23 @@ config AGP
due to kernel allocation issues), you could use PCI accesses due to kernel allocation issues), you could use PCI accesses
and have up to a couple gigs of texture space. and have up to a couple gigs of texture space.
Note that this is the only means to have XFree4/GLX use Note that this is the only means to have X/GLX use
write-combining with MTRR support on the AGP bus. Without it, OpenGL write-combining with MTRR support on the AGP bus. Without it, OpenGL
direct rendering will be a lot slower but still faster than PIO. direct rendering will be a lot slower but still faster than PIO.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say N.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called agpgart. module will be called agpgart.
You should say Y here if you want to use GLX or DRI.
If unsure, say N.
config AGP_ALI config AGP_ALI
tristate "ALI chipset support" tristate "ALI chipset support"
depends on AGP && X86_32 depends on AGP && X86_32
---help--- ---help---
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
XFree86 4.x on the following ALi chipsets. The supported chipsets X on the following ALi chipsets. The supported chipsets
include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
For the ALi-chipset question, ALi suggests you refer to For the ALi-chipset question, ALi suggests you refer to
<http://www.ali.com.tw/eng/support/index.shtml>. <http://www.ali.com.tw/eng/support/index.shtml>.
...@@ -40,28 +41,19 @@ config AGP_ALI ...@@ -40,28 +41,19 @@ config AGP_ALI
timing issues, this chipset cannot do AGP 2x with the G200. timing issues, this chipset cannot do AGP 2x with the G200.
This is a hardware limitation. AGP 1x seems to be fine, though. This is a hardware limitation. AGP 1x seems to be fine, though.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say N.
config AGP_ATI config AGP_ATI
tristate "ATI chipset support" tristate "ATI chipset support"
depends on AGP && X86_32 depends on AGP && X86_32
---help--- ---help---
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
XFree86 4.x on the ATI RadeonIGP family of chipsets. X on the ATI RadeonIGP family of chipsets.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say N.
config AGP_AMD config AGP_AMD
tristate "AMD Irongate, 761, and 762 chipset support" tristate "AMD Irongate, 761, and 762 chipset support"
depends on AGP && X86_32 depends on AGP && X86_32
help help
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
XFree86 4.x on AMD Irongate, 761, and 762 chipsets. X on AMD Irongate, 761, and 762 chipsets.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say N.
config AGP_AMD64 config AGP_AMD64
tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
...@@ -69,45 +61,38 @@ config AGP_AMD64 ...@@ -69,45 +61,38 @@ config AGP_AMD64
default y if GART_IOMMU default y if GART_IOMMU
help help
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
XFree86 4.x using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs. X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
You still need an external AGP bridge like the AMD 8151, VIA You still need an external AGP bridge like the AMD 8151, VIA
K8T400M, SiS755. It may also support other AGP bridges when loaded K8T400M, SiS755. It may also support other AGP bridges when loaded
with agp_try_unsupported=1. with agp_try_unsupported=1.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say Y
config AGP_INTEL config AGP_INTEL
tristate "Intel 440LX/BX/GX, I8xx and E7x05 chipset support" tristate "Intel 440LX/BX/GX, I8xx and E7x05 chipset support"
depends on AGP && X86 depends on AGP && X86
help help
This option gives you AGP support for the GLX component of XFree86 4.x This option gives you AGP support for the GLX component of X
on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850, 860, 875, on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850, 860, 875,
E7205 and E7505 chipsets and full support for the 810, 815, 830M, 845G, E7205 and E7505 chipsets and full support for the 810, 815, 830M,
852GM, 855GM, 865G and I915 integrated graphics chipsets. 845G, 852GM, 855GM, 865G and I915 integrated graphics chipsets.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI, or if you have any Intel integrated graphics
chipsets. If unsure, say Y.
config AGP_NVIDIA config AGP_NVIDIA
tristate "NVIDIA nForce/nForce2 chipset support" tristate "NVIDIA nForce/nForce2 chipset support"
depends on AGP && X86_32 depends on AGP && X86_32
help help
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
XFree86 4.x on the following NVIDIA chipsets. The supported chipsets X on NVIDIA chipsets including nForce and nForce2
include nForce and nForce2
config AGP_SIS config AGP_SIS
tristate "SiS chipset support" tristate "SiS chipset support"
depends on AGP && X86_32 depends on AGP && X86_32
help help
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
XFree86 4.x on Silicon Integrated Systems [SiS] chipsets. X on Silicon Integrated Systems [SiS] chipsets.
Note that 5591/5592 AGP chipsets are NOT supported. Note that 5591/5592 AGP chipsets are NOT supported.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say N.
config AGP_SWORKS config AGP_SWORKS
tristate "Serverworks LE/HE chipset support" tristate "Serverworks LE/HE chipset support"
...@@ -121,10 +106,7 @@ config AGP_VIA ...@@ -121,10 +106,7 @@ config AGP_VIA
depends on AGP && X86_32 depends on AGP && X86_32
help help
This option gives you AGP support for the GLX component of This option gives you AGP support for the GLX component of
XFree86 4.x on VIA MVP3/Apollo Pro chipsets. X on VIA MVP3/Apollo Pro chipsets.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say N.
config AGP_I460 config AGP_I460
tristate "Intel 460GX chipset support" tristate "Intel 460GX chipset support"
...@@ -159,9 +141,6 @@ config AGP_EFFICEON ...@@ -159,9 +141,6 @@ config AGP_EFFICEON
This option gives you AGP support for the Transmeta Efficeon This option gives you AGP support for the Transmeta Efficeon
series processors with integrated northbridges. series processors with integrated northbridges.
You should say Y here if you use XFree86 3.3.6 or 4.x and want to
use GLX or DRI. If unsure, say Y.
config AGP_SGI_TIOCA config AGP_SGI_TIOCA
tristate "SGI TIO chipset AGP support" tristate "SGI TIO chipset AGP support"
depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC) depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC)
......
...@@ -516,8 +516,10 @@ static int __devinit nforce3_agp_init(struct pci_dev *pdev) ...@@ -516,8 +516,10 @@ static int __devinit nforce3_agp_init(struct pci_dev *pdev)
pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &apbase); pci_read_config_dword (hammers[0], AMD64_GARTAPERTUREBASE, &apbase);
/* if x86-64 aperture base is beyond 4G, exit here */ /* if x86-64 aperture base is beyond 4G, exit here */
if ( (apbase & 0x7fff) >> (32 - 25) ) if ( (apbase & 0x7fff) >> (32 - 25) ) {
printk(KERN_INFO PFX "aperture base > 4G\n");
return -ENODEV; return -ENODEV;
}
apbase = (apbase & 0x7fff) << 25; apbase = (apbase & 0x7fff) << 25;
......
...@@ -468,9 +468,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev, ...@@ -468,9 +468,7 @@ static int __devinit agp_serverworks_probe(struct pci_dev *pdev,
switch (pdev->device) { switch (pdev->device) {
case 0x0006: case 0x0006:
/* ServerWorks CNB20HE printk (KERN_ERR PFX "ServerWorks CNB20HE is unsupported due to lack of documentation.\n");
Fail silently.*/
printk (KERN_ERR PFX "Detected ServerWorks CNB20HE chipset: No AGP present.\n");
return -ENODEV; return -ENODEV;
case PCI_DEVICE_ID_SERVERWORKS_HE: case PCI_DEVICE_ID_SERVERWORKS_HE:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment