Commit 0b9715e6 authored by Amit Kumar Salecha's avatar Amit Kumar Salecha Committed by David S. Miller

netxen: handle queue manager access

Check the access by tools for hardware queue engine and handle it
separately than other block registers, otherwise incorrect data
is returned.

Support for only NX3031 based cards.
Acked-by: default avatarDhananjay Phadke <dhananjay.phadke@qlogic.com>
Signed-off-by: default avatarAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 14e2cfbb
...@@ -95,6 +95,9 @@ ...@@ -95,6 +95,9 @@
#define ADDR_IN_WINDOW1(off) \ #define ADDR_IN_WINDOW1(off) \
((off > NETXEN_CRB_PCIX_HOST2) && (off < NETXEN_CRB_MAX)) ? 1 : 0 ((off > NETXEN_CRB_PCIX_HOST2) && (off < NETXEN_CRB_MAX)) ? 1 : 0
#define ADDR_IN_RANGE(addr, low, high) \
(((addr) < (high)) && ((addr) >= (low)))
/* /*
* normalize a 64MB crb address to 32MB PCI window * normalize a 64MB crb address to 32MB PCI window
* To use NETXEN_CRB_NORMALIZE, window _must_ be set to 1 * To use NETXEN_CRB_NORMALIZE, window _must_ be set to 1
...@@ -1352,6 +1355,8 @@ int netxen_config_rss(struct netxen_adapter *adapter, int enable); ...@@ -1352,6 +1355,8 @@ int netxen_config_rss(struct netxen_adapter *adapter, int enable);
int netxen_config_ipaddr(struct netxen_adapter *adapter, u32 ip, int cmd); int netxen_config_ipaddr(struct netxen_adapter *adapter, u32 ip, int cmd);
int netxen_linkevent_request(struct netxen_adapter *adapter, int enable); int netxen_linkevent_request(struct netxen_adapter *adapter, int enable);
void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup); void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup);
void netxen_pci_camqm_read_2M(struct netxen_adapter *, u64, u64 *);
void netxen_pci_camqm_write_2M(struct netxen_adapter *, u64, u64);
int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu); int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu);
int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu); int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
......
...@@ -62,9 +62,6 @@ static inline void writeq(u64 val, void __iomem *addr) ...@@ -62,9 +62,6 @@ static inline void writeq(u64 val, void __iomem *addr)
} }
#endif #endif
#define ADDR_IN_RANGE(addr, low, high) \
(((addr) < (high)) && ((addr) >= (low)))
#define PCI_OFFSET_FIRST_RANGE(adapter, off) \ #define PCI_OFFSET_FIRST_RANGE(adapter, off) \
((adapter)->ahw.pci_base0 + (off)) ((adapter)->ahw.pci_base0 + (off))
#define PCI_OFFSET_SECOND_RANGE(adapter, off) \ #define PCI_OFFSET_SECOND_RANGE(adapter, off) \
...@@ -1448,6 +1445,28 @@ netxen_nic_pci_mem_access_direct(struct netxen_adapter *adapter, u64 off, ...@@ -1448,6 +1445,28 @@ netxen_nic_pci_mem_access_direct(struct netxen_adapter *adapter, u64 off,
return ret; return ret;
} }
void
netxen_pci_camqm_read_2M(struct netxen_adapter *adapter, u64 off, u64 *data)
{
void __iomem *addr = adapter->ahw.pci_base0 +
NETXEN_PCI_CAMQM_2M_BASE + (off - NETXEN_PCI_CAMQM);
spin_lock(&adapter->ahw.mem_lock);
*data = readq(addr);
spin_unlock(&adapter->ahw.mem_lock);
}
void
netxen_pci_camqm_write_2M(struct netxen_adapter *adapter, u64 off, u64 data)
{
void __iomem *addr = adapter->ahw.pci_base0 +
NETXEN_PCI_CAMQM_2M_BASE + (off - NETXEN_PCI_CAMQM);
spin_lock(&adapter->ahw.mem_lock);
writeq(data, addr);
spin_unlock(&adapter->ahw.mem_lock);
}
#define MAX_CTL_CHECK 1000 #define MAX_CTL_CHECK 1000
static int static int
......
...@@ -2537,14 +2537,24 @@ static int ...@@ -2537,14 +2537,24 @@ static int
netxen_sysfs_validate_crb(struct netxen_adapter *adapter, netxen_sysfs_validate_crb(struct netxen_adapter *adapter,
loff_t offset, size_t size) loff_t offset, size_t size)
{ {
size_t crb_size = 4;
if (!(adapter->flags & NETXEN_NIC_DIAG_ENABLED)) if (!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
return -EIO; return -EIO;
if ((size != 4) || (offset & 0x3)) if (offset < NETXEN_PCI_CRBSPACE) {
return -EINVAL; if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
return -EINVAL;
if (offset < NETXEN_PCI_CRBSPACE) if (ADDR_IN_RANGE(offset, NETXEN_PCI_CAMQM,
return -EINVAL; NETXEN_PCI_CAMQM_2M_END))
crb_size = 8;
else
return -EINVAL;
}
if ((size != crb_size) || (offset & (crb_size-1)))
return -EINVAL;
return 0; return 0;
} }
...@@ -2556,14 +2566,23 @@ netxen_sysfs_read_crb(struct kobject *kobj, struct bin_attribute *attr, ...@@ -2556,14 +2566,23 @@ netxen_sysfs_read_crb(struct kobject *kobj, struct bin_attribute *attr,
struct device *dev = container_of(kobj, struct device, kobj); struct device *dev = container_of(kobj, struct device, kobj);
struct netxen_adapter *adapter = dev_get_drvdata(dev); struct netxen_adapter *adapter = dev_get_drvdata(dev);
u32 data; u32 data;
u64 qmdata;
int ret; int ret;
ret = netxen_sysfs_validate_crb(adapter, offset, size); ret = netxen_sysfs_validate_crb(adapter, offset, size);
if (ret != 0) if (ret != 0)
return ret; return ret;
data = NXRD32(adapter, offset); if (NX_IS_REVISION_P3(adapter->ahw.revision_id) &&
memcpy(buf, &data, size); ADDR_IN_RANGE(offset, NETXEN_PCI_CAMQM,
NETXEN_PCI_CAMQM_2M_END)) {
netxen_pci_camqm_read_2M(adapter, offset, &qmdata);
memcpy(buf, &qmdata, size);
} else {
data = NXRD32(adapter, offset);
memcpy(buf, &data, size);
}
return size; return size;
} }
...@@ -2574,14 +2593,23 @@ netxen_sysfs_write_crb(struct kobject *kobj, struct bin_attribute *attr, ...@@ -2574,14 +2593,23 @@ netxen_sysfs_write_crb(struct kobject *kobj, struct bin_attribute *attr,
struct device *dev = container_of(kobj, struct device, kobj); struct device *dev = container_of(kobj, struct device, kobj);
struct netxen_adapter *adapter = dev_get_drvdata(dev); struct netxen_adapter *adapter = dev_get_drvdata(dev);
u32 data; u32 data;
u64 qmdata;
int ret; int ret;
ret = netxen_sysfs_validate_crb(adapter, offset, size); ret = netxen_sysfs_validate_crb(adapter, offset, size);
if (ret != 0) if (ret != 0)
return ret; return ret;
memcpy(&data, buf, size); if (NX_IS_REVISION_P3(adapter->ahw.revision_id) &&
NXWR32(adapter, offset, data); ADDR_IN_RANGE(offset, NETXEN_PCI_CAMQM,
NETXEN_PCI_CAMQM_2M_END)) {
memcpy(&qmdata, buf, size);
netxen_pci_camqm_write_2M(adapter, offset, qmdata);
} else {
memcpy(&data, buf, size);
NXWR32(adapter, offset, data);
}
return size; return size;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment