Commit 0ba517b1 authored by Markus Pargmann's avatar Markus Pargmann Committed by David S. Miller

net: cpsw: Add am33xx MACID readout

This patch adds a function to get the MACIDs from the am33xx SoC
control module registers which hold unique vendor MACIDs. This is only
used if of_get_mac_address() fails to get a valid mac address.
Signed-off-by: default avatarMarkus Pargmann <mpa@pengutronix.de>
Reviewed-by: default avatarWolfram Sang <wsa@the-dreams.de>
Tested-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 56fdb2e0
...@@ -24,6 +24,8 @@ Optional properties: ...@@ -24,6 +24,8 @@ Optional properties:
- ti,hwmods : Must be "cpgmac0" - ti,hwmods : Must be "cpgmac0"
- no_bd_ram : Must be 0 or 1 - no_bd_ram : Must be 0 or 1
- dual_emac : Specifies Switch to act as Dual EMAC - dual_emac : Specifies Switch to act as Dual EMAC
- syscon : Phandle to the system control device node, which is
the control module device of the am33x
Slave Properties: Slave Properties:
Required properties: Required properties:
...@@ -57,6 +59,7 @@ Examples: ...@@ -57,6 +59,7 @@ Examples:
active_slave = <0>; active_slave = <0>;
cpts_clock_mult = <0x80000000>; cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>; cpts_clock_shift = <29>;
syscon = <&cm>;
cpsw_emac0: slave@0 { cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>; phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid"; phy-mode = "rgmii-txid";
...@@ -85,6 +88,7 @@ Examples: ...@@ -85,6 +88,7 @@ Examples:
active_slave = <0>; active_slave = <0>;
cpts_clock_mult = <0x80000000>; cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>; cpts_clock_shift = <29>;
syscon = <&cm>;
cpsw_emac0: slave@0 { cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>; phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid"; phy-mode = "rgmii-txid";
......
...@@ -62,6 +62,8 @@ config TI_CPSW ...@@ -62,6 +62,8 @@ config TI_CPSW
select TI_DAVINCI_CPDMA select TI_DAVINCI_CPDMA
select TI_DAVINCI_MDIO select TI_DAVINCI_MDIO
select TI_CPSW_PHY_SEL select TI_CPSW_PHY_SEL
select MFD_SYSCON
select REGMAP
---help--- ---help---
This driver supports TI's CPSW Ethernet Switch. This driver supports TI's CPSW Ethernet Switch.
......
...@@ -33,6 +33,8 @@ ...@@ -33,6 +33,8 @@
#include <linux/of_net.h> #include <linux/of_net.h>
#include <linux/of_device.h> #include <linux/of_device.h>
#include <linux/if_vlan.h> #include <linux/if_vlan.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/consumer.h>
...@@ -1876,6 +1878,36 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv, ...@@ -1876,6 +1878,36 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv,
slave->port_vlan = data->dual_emac_res_vlan; slave->port_vlan = data->dual_emac_res_vlan;
} }
#define AM33XX_CTRL_MAC_LO_REG(id) (0x630 + 0x8 * id)
#define AM33XX_CTRL_MAC_HI_REG(id) (0x630 + 0x8 * id + 0x4)
static int cpsw_am33xx_cm_get_macid(struct device *dev, int slave,
u8 *mac_addr)
{
u32 macid_lo;
u32 macid_hi;
struct regmap *syscon;
syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
if (IS_ERR(syscon)) {
if (PTR_ERR(syscon) == -ENODEV)
return 0;
return PTR_ERR(syscon);
}
regmap_read(syscon, AM33XX_CTRL_MAC_LO_REG(slave), &macid_lo);
regmap_read(syscon, AM33XX_CTRL_MAC_HI_REG(slave), &macid_hi);
mac_addr[5] = (macid_lo >> 8) & 0xff;
mac_addr[4] = macid_lo & 0xff;
mac_addr[3] = (macid_hi >> 24) & 0xff;
mac_addr[2] = (macid_hi >> 16) & 0xff;
mac_addr[1] = (macid_hi >> 8) & 0xff;
mac_addr[0] = macid_hi & 0xff;
return 0;
}
static int cpsw_probe_dt(struct cpsw_platform_data *data, static int cpsw_probe_dt(struct cpsw_platform_data *data,
struct platform_device *pdev) struct platform_device *pdev)
{ {
...@@ -1988,8 +2020,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, ...@@ -1988,8 +2020,16 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
PHY_ID_FMT, mdio->name, phyid); PHY_ID_FMT, mdio->name, phyid);
mac_addr = of_get_mac_address(slave_node); mac_addr = of_get_mac_address(slave_node);
if (mac_addr) if (mac_addr) {
memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN); memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
} else {
if (of_machine_is_compatible("ti,am33xx")) {
ret = cpsw_am33xx_cm_get_macid(&pdev->dev, i,
slave_data->mac_addr);
if (ret)
return ret;
}
}
slave_data->phy_if = of_get_phy_mode(slave_node); slave_data->phy_if = of_get_phy_mode(slave_node);
if (slave_data->phy_if < 0) { if (slave_data->phy_if < 0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment