Commit 0bb43aec authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A handful of DT updates for the SiFive HiFive Unmatched, that fix the
   regulator handling. These should stop some warning spew.

 - A pair of fixes for both the SiFive Hifive Unleashed and Unmatched,
   that correctly hook up the MMC card detect signal.

* tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: sifive unmatched: Link the tmp451 with its power supply
  riscv: dts: sifive unmatched: Fix regulator for board rev3
  riscv: dts: sifive unmatched: Expose the PMIC sub-functions
  riscv: dts: sifive unmatched: Expose the board ID eeprom
  riscv: dts: sifive unmatched: Name gpio lines
  riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
  riscv: dts: unleashed: Add gpio card detect to mmc-spi-slot
parents fa09ca5e f6f7fbb8
......@@ -76,6 +76,7 @@ mmc@0 {
spi-max-frequency = <20000000>;
voltage-ranges = <3300 3300>;
disable-wp;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
......
......@@ -2,6 +2,7 @@
/* Copyright (c) 2020 SiFive, Inc */
#include "fu740-c000.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
......@@ -54,10 +55,21 @@ &i2c0 {
temperature-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
vcc-supply = <&vdd_bpro>;
interrupt-parent = <&gpio>;
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
};
eeprom@54 {
compatible = "microchip,24c02", "atmel,24c02";
reg = <0x54>;
vcc-supply = <&vdd_bpro>;
label = "board-id";
pagesize = <16>;
read-only;
size = <256>;
};
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
......@@ -65,48 +77,44 @@ pmic@58 {
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
regulators {
vdd_bcore1: bcore1 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-min-microamp = <5000000>;
regulator-max-microamp = <5000000>;
regulator-always-on;
onkey {
compatible = "dlg,da9063-onkey";
};
rtc {
compatible = "dlg,da9063-rtc";
};
vdd_bcore2: bcore2 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-min-microamp = <5000000>;
regulator-max-microamp = <5000000>;
wdt {
compatible = "dlg,da9063-watchdog";
};
regulators {
vdd_bcore: bcores-merged {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-min-microamp = <4800000>;
regulator-max-microamp = <4800000>;
regulator-always-on;
};
vdd_bpro: bpro {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <2500000>;
regulator-max-microamp = <2500000>;
regulator-min-microamp = <2400000>;
regulator-max-microamp = <2400000>;
regulator-always-on;
};
vdd_bperi: bperi {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-min-microvolt = <1060000>;
regulator-max-microvolt = <1060000>;
regulator-min-microamp = <1500000>;
regulator-max-microamp = <1500000>;
regulator-always-on;
};
vdd_bmem: bmem {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microamp = <3000000>;
regulator-max-microamp = <3000000>;
regulator-always-on;
};
vdd_bio: bio {
vdd_bmem_bio: bmem-bio-merged {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microamp = <3000000>;
......@@ -117,86 +125,66 @@ vdd_bio: bio {
vdd_ldo1: ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <100000>;
regulator-max-microamp = <100000>;
regulator-always-on;
};
vdd_ldo2: ldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-always-on;
};
vdd_ldo3: ldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo4: ldo4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdd_ldo5: ldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <100000>;
regulator-max-microamp = <100000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo6: ldo6 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_ldo7: ldo7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ldo8: ldo8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_ld09: ldo9 {
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-min-microamp = <200000>;
regulator-max-microamp = <200000>;
regulator-always-on;
};
vdd_ldo10: ldo10 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-min-microamp = <300000>;
regulator-max-microamp = <300000>;
regulator-always-on;
};
vdd_ldo11: ldo11 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-min-microamp = <300000>;
regulator-max-microamp = <300000>;
regulator-always-on;
};
};
......@@ -223,6 +211,7 @@ mmc@0 {
spi-max-frequency = <20000000>;
voltage-ranges = <3300 3300>;
disable-wp;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
......@@ -245,4 +234,8 @@ &pwm1 {
&gpio {
status = "okay";
gpio-line-names = "J29.1", "PMICNTB", "PMICSHDN", "J8.1", "J8.3",
"PCIe_PWREN", "THERM", "UBRDG_RSTN", "PCIe_PERSTN",
"ULPI_RSTN", "J8.2", "UHUB_RSTN", "GEMGXL_RST", "J8.4",
"EN_VDD_SD", "SD_CD";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment