Merge tag 'soc-arm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC code changes from Arnd Bergmann:
 "The code changes are fairly minimal, there is a bit of conversion of
  the old orion5x platform to modern gpio descriptors, the Kconfig entry
  for the added EN7581 platform and a sysfs change for the i.MX PMU
  device"

* tag 'soc-arm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: add Airoha EN7581 platform
  ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs
  ARM: orion5x: Convert Net2big board to GPIO descriptors for LEDs
  ARM: orion5x: Convert MV2120 board to GPIO descriptors for LEDs
  ARM: orion5x: Convert DNS323 board to GPIO descriptors for LEDs
  ARM: orion5x: Convert D2Net board to GPIO descriptors for LEDs
  ARM: imx: Assign parents for mmdc event_source devices

arch/arm/mach-imx/mmdc.c

@@ -437,6 +437,7 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 {
 	*pmu_mmdc = (struct mmdc_pmu) {
 		.pmu = (struct pmu) {
+			.parent		= dev,
 			.task_ctx_nr    = perf_invalid_context,
 			.attr_groups    = attr_groups,
 			.event_init     = mmdc_pmu_event_init,

arch/arm/mach-orion5x/board-d2net.c

@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
@@ -55,12 +56,9 @@ static struct gpio_led d2net_leds[] = {
 	{
 		.name = "d2net:blue:sata",
 		.default_trigger = "default-on",
-		.gpio = D2NET_GPIO_BLUE_LED_OFF,
-		.active_low = 1,
 	},
 	{
 		.name = "d2net:red:fail",
-		.gpio = D2NET_GPIO_RED_LED,
 	},
 };
 
@@ -77,6 +75,17 @@ static struct platform_device d2net_gpio_leds = {
 	},
 };
 
+static struct gpiod_lookup_table d2net_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_BLUE_LED_OFF, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", D2NET_GPIO_RED_LED, NULL,
+				1, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static void __init d2net_gpio_leds_init(void)
 {
 	int err;
@@ -91,6 +100,7 @@ static void __init d2net_gpio_leds_init(void)
 	if (err)
 		pr_err("d2net: failed to configure blue LED blink GPIO\n");
 
+	gpiod_add_lookup_table(&d2net_leds_gpio_table);
 	platform_device_register(&d2net_gpio_leds);
 }
 

arch/arm/mach-orion5x/dns323-setup.c

@@ -14,6 +14,7 @@
  *
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -254,37 +255,64 @@ static int __init dns323_read_mac_addr(void)
 static struct gpio_led dns323ab_leds[] = {
 	{
 		.name = "power:blue",
-		.gpio = DNS323_GPIO_LED_POWER2,
 		.default_trigger = "default-on",
 	}, {
 		.name = "right:amber",
-		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
-		.active_low = 1,
 	}, {
 		.name = "left:amber",
-		.gpio = DNS323_GPIO_LED_LEFT_AMBER,
-		.active_low = 1,
 	},
 };
 
+static struct gpiod_lookup_table dns323a1_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL,
+				2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+/* B1 is the same but power LED is active high */
+static struct gpiod_lookup_table dns323b1_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_POWER2, NULL,
+				0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_RIGHT_AMBER, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323_GPIO_LED_LEFT_AMBER, NULL,
+				2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
 
 static struct gpio_led dns323c_leds[] = {
 	{
 		.name = "power:blue",
-		.gpio = DNS323C_GPIO_LED_POWER,
 		.default_trigger = "timer",
-		.active_low = 1,
 	}, {
 		.name = "right:amber",
-		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
-		.active_low = 1,
 	}, {
 		.name = "left:amber",
-		.gpio = DNS323C_GPIO_LED_LEFT_AMBER,
-		.active_low = 1,
 	},
 };
 
+static struct gpiod_lookup_table dns323c_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_POWER, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_RIGHT_AMBER, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", DNS323C_GPIO_LED_LEFT_AMBER, NULL,
+				2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
 
 static struct gpio_led_platform_data dns323ab_led_data = {
 	.num_leds	= ARRAY_SIZE(dns323ab_leds),
@@ -621,16 +649,21 @@ static void __init dns323_init(void)
 		/* The 5181 power LED is active low and requires
 		 * DNS323_GPIO_LED_POWER1 to also be low.
 		 */
-		 dns323ab_leds[0].active_low = 1;
+		gpiod_add_lookup_table(&dns323a1_leds_gpio_table);
 		gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
 		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
-		fallthrough;
+		i2c_register_board_info(0, dns323ab_i2c_devices,
+					ARRAY_SIZE(dns323ab_i2c_devices));
+
+		break;
 	case DNS323_REV_B1:
+		gpiod_add_lookup_table(&dns323b1_leds_gpio_table);
 		i2c_register_board_info(0, dns323ab_i2c_devices,
 				ARRAY_SIZE(dns323ab_i2c_devices));
 		break;
 	case DNS323_REV_C1:
 		/* Hookup LEDs & Buttons */
+		gpiod_add_lookup_table(&dns323c_leds_gpio_table);
 		dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
 		dns323_button_device.dev.platform_data = &dns323c_button_data;
 

arch/arm/mach-orion5x/mv2120-setup.c

@@ -8,6 +8,7 @@
  * License, or (at your option) any later version.
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -139,34 +140,45 @@ static struct i2c_board_info __initdata mv2120_i2c_rtc = {
 static struct gpio_led mv2120_led_pins[] = {
 	{
 		.name			= "mv2120:blue:health",
-		.gpio			= 0,
 	},
 	{
 		.name			= "mv2120:red:health",
-		.gpio			= 1,
 	},
 	{
 		.name			= "mv2120:led:bright",
-		.gpio			= 4,
 		.default_trigger	= "default-on",
 	},
 	{
 		.name			= "mv2120:led:dimmed",
-		.gpio			= 5,
 	},
 	{
 		.name			= "mv2120:red:sata0",
-		.gpio			= 8,
-		.active_low		= 1,
 	},
 	{
 		.name			= "mv2120:red:sata1",
-		.gpio			= 9,
-		.active_low		= 1,
 	},
 
 };
 
+static struct gpiod_lookup_table mv2120_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", 0, NULL,
+				0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 1, NULL,
+				1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL,
+				2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL,
+				3, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", 8, NULL,
+				4, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 9, NULL,
+				5, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpio_led_platform_data mv2120_led_data = {
 	.leds		= mv2120_led_pins,
 	.num_leds	= ARRAY_SIZE(mv2120_led_pins),
@@ -219,6 +231,7 @@ static void __init mv2120_init(void)
 			gpio_free(MV2120_GPIO_RTC_IRQ);
 	}
 	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+	gpiod_add_lookup_table(&mv2120_leds_gpio_table);
 	platform_device_register(&mv2120_leds);
 
 	/* register mv2120 specific power-off method */

arch/arm/mach-orion5x/net2big-setup.c

@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/delay.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -214,19 +215,30 @@ static void __init net2big_sata_power_init(void)
 static struct gpio_led net2big_leds[] = {
 	{
 		.name = "net2big:red:power",
-		.gpio = NET2BIG_GPIO_PWR_RED_LED,
 	},
 	{
 		.name = "net2big:blue:power",
-		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
 	},
 	{
 		.name = "net2big:red:sata0",
-		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
 	},
 	{
 		.name = "net2big:red:sata1",
-		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
+	},
+};
+
+static struct gpiod_lookup_table net2big_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_RED_LED, NULL,
+				0, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_PWR_BLUE_LED, NULL,
+				1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA0_RED_LED, NULL,
+				2, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("orion_gpio0", NET2BIG_GPIO_SATA1_RED_LED, NULL,
+				3, GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -282,6 +294,7 @@ static void __init net2big_gpio_leds_init(void)
 	if (err)
 		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
 
+	gpiod_add_lookup_table(&net2big_leds_gpio_table);
 	platform_device_register(&net2big_gpio_leds);
 }
 

arch/arm/mach-orion5x/ts409-setup.c

@@ -8,6 +8,7 @@
  * Copyright (C) 2008  Martin Michlmayr <tbm@cyrius.com>
  */
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -168,20 +169,27 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
 static struct gpio_led ts409_led_pins[] = {
 	{
 		.name		= "ts409:red:sata1",
-		.gpio		= 4,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata2",
-		.gpio		= 5,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata3",
-		.gpio		= 6,
-		.active_low	= 1,
 	}, {
 		.name		= "ts409:red:sata4",
-		.gpio		= 7,
-		.active_low	= 1,
+	},
+};
+
+static struct gpiod_lookup_table ts409_leds_gpio_table = {
+	.dev_id = "leds-gpio",
+	.table = {
+		GPIO_LOOKUP_IDX("orion_gpio0", 4, NULL,
+				0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 5, NULL,
+				1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 6, NULL,
+				2, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("orion_gpio0", 7, NULL,
+				3, GPIO_ACTIVE_LOW),
+		{ },
 	},
 };
 
@@ -300,6 +308,7 @@ static void __init qnap_ts409_init(void)
 	if (qnap_ts409_i2c_rtc.irq == 0)
 		pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+	gpiod_add_lookup_table(&ts409_leds_gpio_table);
 	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */

arch/arm64/Kconfig.platforms

@@ -8,6 +8,13 @@ config ARCH_ACTIONS
 	help
 	  This enables support for the Actions Semiconductor S900 SoC family.
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  This enables support for the ARM64 based Airoha SoCs.
+
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER