usb: chipidea: operate on otgsc register in a general way

Use a more general way to read and write otgsc register.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Li Jun <b47624@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/chipidea/core.c

@@ -393,7 +393,7 @@ static irqreturn_t ci_irq(int irq, void *data)
 	u32 otgsc = 0;
 
 	if (ci->is_otg)
-		otgsc = hw_read(ci, OP_OTGSC, ~0);
+		otgsc = hw_read_otgsc(ci, ~0);
 
 	/*
 	 * Handle id change interrupt, it indicates device/host function
@@ -401,7 +401,8 @@ static irqreturn_t ci_irq(int irq, void *data)
 	 */
 	if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
 		ci->id_event = true;
-		ci_clear_otg_interrupt(ci, OTGSC_IDIS);
+		/* Clear ID change irq status */
+		hw_write_otgsc(ci, OTGSC_IDIS, OTGSC_IDIS);
 		disable_irq_nosync(ci->irq);
 		queue_work(ci->wq, &ci->work);
 		return IRQ_HANDLED;
@@ -413,7 +414,8 @@ static irqreturn_t ci_irq(int irq, void *data)
 	 */
 	if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
 		ci->b_sess_valid_event = true;
-		ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
+		/* Clear BSV irq */
+		hw_write_otgsc(ci, OTGSC_BSVIS, OTGSC_BSVIS);
 		disable_irq_nosync(ci->irq);
 		queue_work(ci->wq, &ci->work);
 		return IRQ_HANDLED;
@@ -535,8 +537,9 @@ static void ci_get_otg_capable(struct ci_hdrc *ci)
 					== (DCCPARAMS_DC | DCCPARAMS_HC));
 	if (ci->is_otg) {
 		dev_dbg(ci->dev, "It is OTG capable controller\n");
-		ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
-		ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
+		/* Disable and clear all OTG irq */
+		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+							OTGSC_INT_STATUS_BITS);
 	}
 }
 
@@ -648,7 +651,8 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 			 */
 			mdelay(2);
 			ci->role = ci_otg_role(ci);
-			ci_enable_otg_interrupt(ci, OTGSC_IDIE);
+			/* Enable ID change irq */
+			hw_write_otgsc(ci, OTGSC_IDIE, OTGSC_IDIE);
 		} else {
 			/*
 			 * If the controller is not OTG capable, but support

drivers/usb/chipidea/otg.c

@@ -23,14 +23,32 @@
 #include "bits.h"
 #include "otg.h"
 
+/**
+ * hw_read_otgsc returns otgsc register bits value.
+ * @mask: bitfield mask
+ */
+u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
+{
+	return hw_read(ci, OP_OTGSC, mask);
+}
+
+/**
+ * hw_write_otgsc updates target bits of OTGSC register.
+ * @mask: bitfield mask
+ * @data: to be written
+ */
+void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data)
+{
+	hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data);
+}
+
 /**
  * ci_otg_role - pick role based on ID pin state
  * @ci: the controller
  */
 enum ci_role ci_otg_role(struct ci_hdrc *ci)
 {
-	u32 sts = hw_read(ci, OP_OTGSC, ~0);
-	enum ci_role role = sts & OTGSC_ID
+	enum ci_role role = hw_read_otgsc(ci, OTGSC_ID)
 		? CI_ROLE_GADGET
 		: CI_ROLE_HOST;
 
@@ -39,14 +57,10 @@ enum ci_role ci_otg_role(struct ci_hdrc *ci)
 
 void ci_handle_vbus_change(struct ci_hdrc *ci)
 {
-	u32 otgsc;
-
 	if (!ci->is_otg)
 		return;
 
-	otgsc = hw_read(ci, OP_OTGSC, ~0);
-
-	if (otgsc & OTGSC_BSV)
+	if (hw_read_otgsc(ci, OTGSC_BSV))
 		usb_gadget_vbus_connect(&ci->gadget);
 	else
 		usb_gadget_vbus_disconnect(&ci->gadget);
@@ -115,6 +129,7 @@ void ci_hdrc_otg_destroy(struct ci_hdrc *ci)
 		flush_workqueue(ci->wq);
 		destroy_workqueue(ci->wq);
 	}
-	ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
-	ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
+	/* Disable all OTG irq and clear status */
+	hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
+						OTGSC_INT_STATUS_BITS);
 }

drivers/usb/chipidea/otg.h

@@ -11,22 +11,8 @@
 #ifndef __DRIVERS_USB_CHIPIDEA_OTG_H
 #define __DRIVERS_USB_CHIPIDEA_OTG_H
 
-static inline void ci_clear_otg_interrupt(struct ci_hdrc *ci, u32 bits)
-{
-	/* Only clear request bits */
-	hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS, bits);
-}
-
-static inline void ci_enable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
-{
-	hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, bits);
-}
-
-static inline void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
-{
-	hw_write(ci, OP_OTGSC, bits | OTGSC_INT_STATUS_BITS, 0);
-}
-
+u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask);
+void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data);
 int ci_hdrc_otg_init(struct ci_hdrc *ci);
 void ci_hdrc_otg_destroy(struct ci_hdrc *ci);
 enum ci_role ci_otg_role(struct ci_hdrc *ci);

drivers/usb/chipidea/udc.c

@@ -1843,21 +1843,22 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
 
 static int udc_id_switch_for_device(struct ci_hdrc *ci)
 {
-	if (ci->is_otg) {
-		ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
-		ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
-	}
+	if (ci->is_otg)
+		/* Clear and enable BSV irq */
+		hw_write_otgsc(ci, OTGSC_BSVIS | OTGSC_BSVIE,
+					OTGSC_BSVIS | OTGSC_BSVIE);
 
 	return 0;
 }
 
 static void udc_id_switch_for_host(struct ci_hdrc *ci)
 {
-	if (ci->is_otg) {
-		/* host doesn't care B_SESSION_VALID event */
-		ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
-		ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
-	}
+	/*
+	 * host doesn't care B_SESSION_VALID event
+	 * so clear and disbale BSV irq
+	 */
+	if (ci->is_otg)
+		hw_write_otgsc(ci, OTGSC_BSVIE | OTGSC_BSVIS, OTGSC_BSVIS);
 }
 
 /**