sfc: Disable Siena support

Disable the build of Siena code until later in this patch series.
Prevent sfc.ko from binding to Siena NICs.

efx_init_sriov/efx_fini_sriov is only used for Siena. Remove calls
to those.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/sfc/Kconfig

@@ -17,14 +17,14 @@ config NET_VENDOR_SOLARFLARE
 if NET_VENDOR_SOLARFLARE
 
 config SFC
-	tristate "Solarflare SFC9000/SFC9100/EF100-family support"
+	tristate "Solarflare SFC9100/EF100-family support"
 	depends on PCI
 	depends on PTP_1588_CLOCK_OPTIONAL
 	select MDIO
 	select CRC32
 	help
 	  This driver supports 10/40-gigabit Ethernet cards based on
-	  the Solarflare SFC9000-family and SFC9100-family controllers.
+	  the Solarflare SFC9100-family controllers.
 
 	  It also supports 10/25/40/100-gigabit Ethernet cards based
 	  on the Solarflare EF100 networking IP in Xilinx FPGAs.
@@ -47,11 +47,11 @@ config SFC_MCDI_MON
 	  This exposes the on-board firmware-managed sensors as a
 	  hardware monitor device.
 config SFC_SRIOV
-	bool "Solarflare SFC9000-family SR-IOV support"
+	bool "Solarflare SFC9000/SFC9100-family SR-IOV support"
 	depends on SFC && PCI_IOV
 	default y
 	help
-	  This enables support for the SFC9000 I/O Virtualization
+	  This enables support for the Single Root I/O Virtualization
 	  features, allowing accelerated network performance in
 	  virtualized environments.
 config SFC_MCDI_LOGGING

drivers/net/ethernet/sfc/Makefile

 # SPDX-License-Identifier: GPL-2.0
 sfc-y			+= efx.o efx_common.o efx_channels.o nic.o \
-			   farch.o siena.o ef10.o \
+			   ef10.o \
 			   tx.o tx_common.o tx_tso.o rx.o rx_common.o \
 			   selftest.o ethtool.o ethtool_common.o ptp.o \
 			   mcdi.o mcdi_port.o mcdi_port_common.o \
@@ -8,7 +8,7 @@ sfc-y			+= efx.o efx_common.o efx_channels.o nic.o \
 			   ef100.o ef100_nic.o ef100_netdev.o \
 			   ef100_ethtool.o ef100_rx.o ef100_tx.o
 sfc-$(CONFIG_SFC_MTD)	+= mtd.o
-sfc-$(CONFIG_SFC_SRIOV)	+= sriov.o siena_sriov.o ef10_sriov.o ef100_sriov.o
+sfc-$(CONFIG_SFC_SRIOV)	+= sriov.o ef10_sriov.o ef100_sriov.o
 
 obj-$(CONFIG_SFC)	+= sfc.o
 

drivers/net/ethernet/sfc/efx.c

@@ -795,10 +795,6 @@ static void efx_unregister_netdev(struct efx_nic *efx)
 
 /* PCI device ID table */
 static const struct pci_device_id efx_pci_table[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x0803),	/* SFC9020 */
-	 .driver_data = (unsigned long) &siena_a0_nic_type},
-	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x0813),	/* SFL9021 */
-	 .driver_data = (unsigned long) &siena_a0_nic_type},
 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x0903),  /* SFC9120 PF */
 	 .driver_data = (unsigned long) &efx_hunt_a0_nic_type},
 	{PCI_DEVICE(PCI_VENDOR_ID_SOLARFLARE, 0x1903),  /* SFC9120 VF */
@@ -1294,12 +1290,6 @@ static int __init efx_init_module(void)
 	if (rc)
 		goto err_notifier;
 
-#ifdef CONFIG_SFC_SRIOV
-	rc = efx_init_sriov();
-	if (rc)
-		goto err_sriov;
-#endif
-
 	rc = efx_create_reset_workqueue();
 	if (rc)
 		goto err_reset;
@@ -1319,10 +1309,6 @@ static int __init efx_init_module(void)
  err_pci:
 	efx_destroy_reset_workqueue();
  err_reset:
-#ifdef CONFIG_SFC_SRIOV
-	efx_fini_sriov();
- err_sriov:
-#endif
 	unregister_netdevice_notifier(&efx_netdev_notifier);
  err_notifier:
 	return rc;
@@ -1335,9 +1321,6 @@ static void __exit efx_exit_module(void)
 	pci_unregister_driver(&ef100_pci_driver);
 	pci_unregister_driver(&efx_pci_driver);
 	efx_destroy_reset_workqueue();
-#ifdef CONFIG_SFC_SRIOV
-	efx_fini_sriov();
-#endif
 	unregister_netdevice_notifier(&efx_netdev_notifier);
 
 }

drivers/net/ethernet/sfc/nic.h

@@ -301,10 +301,6 @@ struct efx_ef10_nic_data {
 int efx_ef10_tx_tso_desc(struct efx_tx_queue *tx_queue, struct sk_buff *skb,
 			 bool *data_mapped);
 
-int efx_init_sriov(void);
-void efx_fini_sriov(void);
-
-extern const struct efx_nic_type siena_a0_nic_type;
 extern const struct efx_nic_type efx_hunt_a0_nic_type;
 extern const struct efx_nic_type efx_hunt_a0_vf_nic_type;