drm/amd/display: Enable pflip interrupt upon pipe enable

[Why]
pflip interrupt would not be enabled promptly if a pipe is disabled
and re-enabled, causing flip_done timeout error during DP
compliance tests

[How]
Enable pflip interrupt upon pipe enablement
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -4796,6 +4796,7 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
 	dc_plane_state->global_alpha_value = plane_info.global_alpha_value;
 	dc_plane_state->dcc = plane_info.dcc;
 	dc_plane_state->layer_index = plane_info.layer_index; // Always returns 0
+	dc_plane_state->flip_int_enabled = true;
 
 	/*
 	 * Always set input transfer function, since plane state is refreshed

drivers/gpu/drm/amd/display/dc/dc.h

@@ -898,6 +898,7 @@ struct dc_plane_state {
 	int layer_index;
 
 	union surface_update_flags update_flags;
+	bool flip_int_enabled;
 	/* private to DC core */
 	struct dc_plane_status status;
 	struct dc_context *ctx;

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c

@@ -1257,6 +1257,16 @@ void hubp1_soft_reset(struct hubp *hubp, bool reset)
 	REG_UPDATE(DCHUBP_CNTL, HUBP_DISABLE, reset ? 1 : 0);
 }
 
+void hubp1_set_flip_int(struct hubp *hubp)
+{
+	struct dcn10_hubp *hubp1 = TO_DCN10_HUBP(hubp);
+
+	REG_UPDATE(DCSURF_SURFACE_FLIP_INTERRUPT,
+		SURFACE_FLIP_INT_MASK, 1);
+
+	return;
+}
+
 void hubp1_init(struct hubp *hubp)
 {
 	//do nothing
@@ -1290,6 +1300,7 @@ static const struct hubp_funcs dcn10_hubp_funcs = {
 	.dmdata_load = NULL,
 	.hubp_soft_reset = hubp1_soft_reset,
 	.hubp_in_blank = hubp1_in_blank,
+	.hubp_set_flip_int = hubp1_set_flip_int,
 };
 
 /*****************************************/

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.h

@@ -74,6 +74,7 @@
 	SRI(DCSURF_SURFACE_EARLIEST_INUSE_C, HUBPREQ, id),\
 	SRI(DCSURF_SURFACE_EARLIEST_INUSE_HIGH_C, HUBPREQ, id),\
 	SRI(DCSURF_SURFACE_CONTROL, HUBPREQ, id),\
+	SRI(DCSURF_SURFACE_FLIP_INTERRUPT, HUBPREQ, id),\
 	SRI(HUBPRET_CONTROL, HUBPRET, id),\
 	SRI(DCN_EXPANSION_MODE, HUBPREQ, id),\
 	SRI(DCHUBP_REQ_SIZE_CONFIG, HUBP, id),\
@@ -183,6 +184,7 @@
 	uint32_t DCSURF_SURFACE_EARLIEST_INUSE_C; \
 	uint32_t DCSURF_SURFACE_EARLIEST_INUSE_HIGH_C; \
 	uint32_t DCSURF_SURFACE_CONTROL; \
+	uint32_t DCSURF_SURFACE_FLIP_INTERRUPT; \
 	uint32_t HUBPRET_CONTROL; \
 	uint32_t DCN_EXPANSION_MODE; \
 	uint32_t DCHUBP_REQ_SIZE_CONFIG; \
@@ -332,6 +334,7 @@
 	HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_META_SURFACE_TMZ_C, mask_sh),\
 	HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_SURFACE_DCC_EN, mask_sh),\
 	HUBP_SF(HUBPREQ0_DCSURF_SURFACE_CONTROL, SECONDARY_SURFACE_DCC_IND_64B_BLK, mask_sh),\
+	HUBP_SF(HUBPREQ0_DCSURF_SURFACE_FLIP_INTERRUPT, SURFACE_FLIP_INT_MASK, mask_sh),\
 	HUBP_SF(HUBPRET0_HUBPRET_CONTROL, DET_BUF_PLANE1_BASE_ADDRESS, mask_sh),\
 	HUBP_SF(HUBPRET0_HUBPRET_CONTROL, CROSSBAR_SRC_CB_B, mask_sh),\
 	HUBP_SF(HUBPRET0_HUBPRET_CONTROL, CROSSBAR_SRC_CR_R, mask_sh),\
@@ -531,6 +534,7 @@
 	type PRIMARY_SURFACE_DCC_IND_64B_BLK;\
 	type SECONDARY_SURFACE_DCC_EN;\
 	type SECONDARY_SURFACE_DCC_IND_64B_BLK;\
+	type SURFACE_FLIP_INT_MASK;\
 	type DET_BUF_PLANE1_BASE_ADDRESS;\
 	type CROSSBAR_SRC_CB_B;\
 	type CROSSBAR_SRC_CR_R;\
@@ -777,4 +781,6 @@ void hubp1_read_state_common(struct hubp *hubp);
 bool hubp1_in_blank(struct hubp *hubp);
 void hubp1_soft_reset(struct hubp *hubp, bool reset);
 
+void hubp1_set_flip_int(struct hubp *hubp);
+
 #endif

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -2438,6 +2438,13 @@ static void dcn10_enable_plane(
 	if (dc->debug.sanity_checks) {
 		hws->funcs.verify_allow_pstate_change_high(dc);
 	}
+
+	if (!pipe_ctx->top_pipe
+		&& pipe_ctx->plane_state
+		&& pipe_ctx->plane_state->flip_int_enabled
+		&& pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int)
+			pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int(pipe_ctx->plane_res.hubp);
+
 }
 
 void dcn10_program_gamut_remap(struct pipe_ctx *pipe_ctx)

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hubp.c

@@ -1597,6 +1597,7 @@ static struct hubp_funcs dcn20_hubp_funcs = {
 	.validate_dml_output = hubp2_validate_dml_output,
 	.hubp_in_blank = hubp1_in_blank,
 	.hubp_soft_reset = hubp1_soft_reset,
+	.hubp_set_flip_int = hubp1_set_flip_int,
 };
 
 

drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c

@@ -1146,6 +1146,12 @@ void dcn20_enable_plane(
 		pipe_ctx->plane_res.hubp->funcs->hubp_set_vm_system_aperture_settings(pipe_ctx->plane_res.hubp, &apt);
 	}
 
+	if (!pipe_ctx->top_pipe
+		&& pipe_ctx->plane_state
+		&& pipe_ctx->plane_state->flip_int_enabled
+		&& pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int)
+			pipe_ctx->plane_res.hubp->funcs->hubp_set_flip_int(pipe_ctx->plane_res.hubp);
+
 //	if (dc->debug.sanity_checks) {
 //		dcn10_verify_allow_pstate_change_high(dc);
 //	}

drivers/gpu/drm/amd/display/dc/dcn21/dcn21_hubp.c

@@ -838,6 +838,7 @@ static struct hubp_funcs dcn21_hubp_funcs = {
 	.hubp_set_flip_control_surface_gsl = hubp2_set_flip_control_surface_gsl,
 	.hubp_init = hubp21_init,
 	.validate_dml_output = hubp21_validate_dml_output,
+	.hubp_set_flip_int = hubp1_set_flip_int,
 };
 
 bool hubp21_construct(

drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hubp.c

@@ -511,6 +511,7 @@ static struct hubp_funcs dcn30_hubp_funcs = {
 	.hubp_init = hubp3_init,
 	.hubp_in_blank = hubp1_in_blank,
 	.hubp_soft_reset = hubp1_soft_reset,
+	.hubp_set_flip_int = hubp1_set_flip_int,
 };
 
 bool hubp3_construct(

drivers/gpu/drm/amd/display/dc/inc/hw/hubp.h

@@ -191,6 +191,8 @@ struct hubp_funcs {
 	bool (*hubp_in_blank)(struct hubp *hubp);
 	void (*hubp_soft_reset)(struct hubp *hubp, bool reset);
 
+	void (*hubp_set_flip_int)(struct hubp *hubp);
+
 };
 
 #endif