Commit 0ce4bc1d authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Wolfram Sang

i2c: mv64xxx: continue probe when clock-frequency is missing

The "clock-frequency" DT property is listed as optional, However,
the current code stores the return value of of_property_read_u32 in
the return code of mv64xxx_of_config, but then forgets to clear it
after setting the default value of "clock-frequency". It is then
passed out to the main probe function, resulting in a probe failure
when "clock-frequency" is missing.

This patch checks and then throws away the return value of
of_property_read_u32, instead of storing it and having to clear it
afterwards.

This issue was discovered after the property was removed from all
sunxi DTs.

Fixes: 4c730a06 ("i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided")
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Cc: stable@vger.kernel.org
Acked-by: default avatarAndrew Lunn <andrew@lunn.ch>
Acked-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent dd318b0d
...@@ -746,8 +746,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, ...@@ -746,8 +746,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
} }
tclk = clk_get_rate(drv_data->clk); tclk = clk_get_rate(drv_data->clk);
rc = of_property_read_u32(np, "clock-frequency", &bus_freq); if (of_property_read_u32(np, "clock-frequency", &bus_freq))
if (rc)
bus_freq = 100000; /* 100kHz by default */ bus_freq = 100000; /* 100kHz by default */
if (!mv64xxx_find_baud_factors(bus_freq, tclk, if (!mv64xxx_find_baud_factors(bus_freq, tclk,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment