Merge tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "Quite a new features are included this time.

  First off, the Collaborative Processor Performance Control interface
  (version 2) defined by ACPI will now be supported on ARM64 along with
  a cpufreq frontend for CPU performance scaling.

  Second, ACPI gets a new infrastructure for the early probing of IRQ
  chips and clock sources (along the lines of the existing similar
  mechanism for DT).

  Next, the ACPI core and the generic device properties API will now
  support a recently introduced hierarchical properties extension of the
  _DSD (Device Specific Data) ACPI device configuration object.  If the
  ACPI platform firmware uses that extension to organize device
  properties in a hierarchical way, the kernel will automatically handle
  it and make those properties available to device drivers via the
  generic device properties API.

  It also will be possible to build the ACPICA's AML interpreter
  debugger into the kernel now and use that to diagnose AML-related
  problems more efficiently.  In the future, this should make it
  possible to single-step AML execution and do similar things.
  Interesting stuff, although somewhat experimental at this point.

  Finally, the PM core gets a new mechanism that can be used by device
  drivers to distinguish between suspend-to-RAM (based on platform
  firmware support) and suspend-to-idle (or other variants of system
  suspend the platform firmware is not involved in) and possibly
  optimize their device suspend/resume handling accordingly.

  In addition to that, some existing features are re-organized quite
  substantially.

  First, the ACPI-based handling of PCI host bridges on x86 and ia64 is
  unified and the common code goes into the ACPI core (so as to reduce
  code duplication and eliminate non-essential differences between the
  two architectures in that area).

  Second, the Operating Performance Points (OPP) framework is
  reorganized to make the code easier to find and follow.

  Next, the cpufreq core's sysfs interface is reorganized to get rid of
  the "primary CPU" concept for configurations in which the same
  performance scaling settings are shared between multiple CPUs.

  Finally, some interfaces that aren't necessary any more are dropped
  from the generic power domains framework.

  On top of the above we have some minor extensions, cleanups and bug
  fixes in multiple places, as usual.

  Specifics:

   - ACPICA update to upstream revision 20150930 (Bob Moore, Lv Zheng).

     The most significant change is to allow the AML debugger to be
     built into the kernel.  On top of that there is an update related
     to the NFIT table (the ACPI persistent memory interface) and a few
     fixes and cleanups.

   - ACPI CPPC2 (Collaborative Processor Performance Control v2) support
     along with a cpufreq frontend (Ashwin Chaugule).

     This can only be enabled on ARM64 at this point.

   - New ACPI infrastructure for the early probing of IRQ chips and
     clock sources (Marc Zyngier).

   - Support for a new hierarchical properties extension of the ACPI
     _DSD (Device Specific Data) device configuration object allowing
     the kernel to handle hierarchical properties (provided by the
     platform firmware this way) automatically and make them available
     to device drivers via the generic device properties interface
     (Rafael Wysocki).

   - Generic device properties API extension to obtain an index of
     certain string value in an array of strings, along the lines of
     of_property_match_string(), but working for all of the supported
     firmware node types, and support for the "dma-names" device
     property based on it (Mika Westerberg).

   - ACPI core fix to parse the MADT (Multiple APIC Description Table)
     entries in the order expected by platform firmware (and mandated by
     the specification) to avoid confusion on systems with more than 255
     logical CPUs (Lukasz Anaczkowski).

   - Consolidation of the ACPI-based handling of PCI host bridges on x86
     and ia64 (Jiang Liu).

   - ACPI core fixes to ensure that the correct IRQ number is used to
     represent the SCI (System Control Interrupt) in the cases when it
     has been re-mapped (Chen Yu).

   - New ACPI backlight quirk for Lenovo IdeaPad S405 (Hans de Goede).

   - ACPI EC driver fixes (Lv Zheng).

   - Assorted ACPI fixes and cleanups (Dan Carpenter, Insu Yun, Jiri
     Kosina, Rami Rosen, Rasmus Villemoes).

   - New mechanism in the PM core allowing drivers to check if the
     platform firmware is going to be involved in the upcoming system
     suspend or if it has been involved in the suspend the system is
     resuming from at the moment (Rafael Wysocki).

     This should allow drivers to optimize their suspend/resume handling
     in some cases and the changes include a couple of users of it (the
     i8042 input driver, PCI PM).

   - PCI PM fix to prevent runtime-suspended devices with PME enabled
     from being resumed during system suspend even if they aren't
     configured to wake up the system from sleep (Rafael Wysocki).

   - New mechanism to report the number of a wakeup IRQ that woke up the
     system from sleep last time (Alexandra Yates).

   - Removal of unused interfaces from the generic power domains
     framework and fixes related to latency measurements in that code
     (Ulf Hansson, Daniel Lezcano).

   - cpufreq core sysfs interface rework to make it handle CPUs that
     share performance scaling settings (represented by a common cpufreq
     policy object) more symmetrically (Viresh Kumar).

     This should help to simplify the CPU offline/online handling among
     other things.

   - cpufreq core fixes and cleanups (Viresh Kumar).

   - intel_pstate fixes related to the Turbo Activation Ratio (TAR)
     mechanism on client platforms which causes the turbo P-states range
     to vary depending on platform firmware settings (Srinivas
     Pandruvada).

   - intel_pstate sysfs interface fix (Prarit Bhargava).

   - Assorted cpufreq driver (imx, tegra20, powernv, integrator) fixes
     and cleanups (Bai Ping, Bartlomiej Zolnierkiewicz, Shilpasri G
     Bhat, Luis de Bethencourt).

   - cpuidle mvebu driver cleanups (Russell King).

   - OPP (Operating Performance Points) framework code reorganization to
     make it more maintainable (Viresh Kumar).

   - Intel Broxton support for the RAPL (Running Average Power Limits)
     power capping driver (Amy Wiles).

   - Assorted power management code fixes and cleanups (Dan Carpenter,
     Geert Uytterhoeven, Geliang Tang, Luis de Bethencourt, Rasmus
     Villemoes)"

* tag 'pm+acpi-4.4-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (108 commits)
  cpufreq: postfix policy directory with the first CPU in related_cpus
  cpufreq: create cpu/cpufreq/policyX directories
  cpufreq: remove cpufreq_sysfs_{create|remove}_file()
  cpufreq: create cpu/cpufreq at boot time
  cpufreq: Use cpumask_copy instead of cpumask_or to copy a mask
  cpufreq: ondemand: Drop unnecessary locks from update_sampling_rate()
  PM / Domains: Merge measurements for PM QoS device latencies
  PM / Domains: Don't measure ->start|stop() latency in system PM callbacks
  PM / clk: Fix broken build due to non-matching code and header #ifdefs
  ACPI / Documentation: add copy_dsdt to ACPI format options
  ACPI / sysfs: correctly check failing memory allocation
  ACPI / video: Add a quirk to force native backlight on Lenovo IdeaPad S405
  ACPI / CPPC: Fix potential memory leak
  ACPI / CPPC: signedness bug in register_pcc_channel()
  ACPI / PAD: power_saving_thread() is not freezable
  ACPI / PM: Fix incorrect wakeup IRQ setting during suspend-to-idle
  ACPI: Using correct irq when waiting for events
  ACPI: Use correct IRQ when uninstalling ACPI interrupt handler
  cpuidle: mvebu: disable the bind/unbind attributes and use builtin_platform_driver
  cpuidle: mvebu: clean up multiple platform drivers
  ...

Documentation/ABI/testing/sysfs-power

@@ -256,3 +256,15 @@ Description:
 		Writing a "1" enables this printing while writing a "0"
 		disables it.  The default value is "0".  Reading from this file
 		will display the current value.
+
+What:		/sys/power/pm_wakeup_irq
+Date:		April 2015
+Contact:	Alexandra Yates <alexandra.yates@linux.intel.org>
+Description:
+		The /sys/power/pm_wakeup_irq file reports to user space the IRQ
+		number of the first wakeup interrupt (that is, the first
+		interrupt from an IRQ line armed for system wakeup) seen by the
+		kernel during the most recent system suspend/resume cycle.
+
+		This output is useful for system wakeup diagnostics of spurious
+		wakeup interrupts.

Documentation/kernel-parameters.txt

@@ -167,7 +167,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	acpi=		[HW,ACPI,X86,ARM64]
 			Advanced Configuration and Power Interface
-			Format: { force | off | strict | noirq | rsdt }
+			Format: { force | off | strict | noirq | rsdt |
+				  copy_dsdt }
 			force -- enable ACPI if default was off
 			off -- disable ACPI if default was on
 			noirq -- do not use ACPI for IRQ routing
@@ -1561,6 +1562,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		hwp_only
 			Only load intel_pstate on systems which support
 			hardware P state control (HWP) if available.
+		no_acpi
+			Don't use ACPI processor performance control objects
+			_PSS and _PPC specified limits.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)

arch/arm/kernel/time.c

@@ -120,6 +120,6 @@ void __init time_init(void)
 #ifdef CONFIG_COMMON_CLK
 		of_clk_init(NULL);
 #endif
-		clocksource_of_init();
+		clocksource_probe();
 	}
 }

arch/arm/mach-imx/mach-imx6q.c

@@ -350,7 +350,7 @@ static void __init imx6q_opp_init(void)
 		return;
 	}
 
-	if (of_init_opp_table(cpu_dev)) {
+	if (dev_pm_opp_of_add_table(cpu_dev)) {
 		pr_warn("failed to init OPP table\n");
 		goto put_node;
 	}

arch/arm/mach-omap2/timer.c

@@ -647,7 +647,7 @@ static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
 void __init omap4_local_timer_init(void)
 {
 	omap4_sync32k_timer_init();
-	clocksource_of_init();
+	clocksource_probe();
 }
 #else
 void __init omap4_local_timer_init(void)
@@ -663,7 +663,7 @@ void __init omap5_realtime_timer_init(void)
 	omap4_sync32k_timer_init();
 	realtime_counter_init();
 
-	clocksource_of_init();
+	clocksource_probe();
 }
 #endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */
 

arch/arm/mach-rockchip/rockchip.c

@@ -67,7 +67,7 @@ static void __init rockchip_timer_init(void)
 	}
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static void __init rockchip_dt_init(void)

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -97,7 +97,7 @@ static u32 __init r8a7779_read_mode_pins(void)
 static void __init r8a7779_init_time(void)
 {
 	r8a7779_clocks_init(r8a7779_read_mode_pins());
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static const char *const r8a7779_compat_dt[] __initconst = {

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -128,7 +128,7 @@ void __init rcar_gen2_timer_init(void)
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
 	rcar_gen2_clocks_init(mode);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 struct memory_reserve_config {

arch/arm/mach-spear/spear13xx.c

@@ -124,5 +124,5 @@ void __init spear13xx_timer_init(void)
 	clk_put(pclk);
 
 	spear_setup_of_timer();
-	clocksource_of_init();
+	clocksource_probe();
 }

arch/arm/mach-sunxi/sunxi.c

@@ -46,7 +46,7 @@ static void __init sun6i_timer_init(void)
 	of_clk_init(NULL);
 	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
 		sun6i_reset_init();
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")

arch/arm/mach-u300/core.c

@@ -408,7 +408,7 @@ static const char * u300_board_compat[] = {
 DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
 	.map_io		= u300_map_io,
 	.init_irq	= u300_init_irq_dt,
-	.init_time	= clocksource_of_init,
+	.init_time	= clocksource_probe,
 	.init_machine	= u300_init_machine_dt,
 	.restart	= u300_restart,
 	.dt_compat      = u300_board_compat,

arch/arm/mach-ux500/timer.c

@@ -44,5 +44,5 @@ void __init ux500_timer_init(void)
 
 dt_fail:
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
-	clocksource_of_init();
+	clocksource_probe();
 }

arch/arm/mach-zynq/common.c

@@ -154,7 +154,7 @@ static void __init zynq_timer_init(void)
 
 	zynq_clock_init();
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 static struct map_desc zynq_cortex_a9_scu_map __initdata = {

arch/arm64/include/asm/acpi.h

@@ -12,7 +12,6 @@
 #ifndef _ASM_ACPI_H
 #define _ASM_ACPI_H
 
-#include <linux/irqchip/arm-gic-acpi.h>
 #include <linux/mm.h>
 #include <linux/psci.h>
 

arch/arm64/include/asm/irq.h

 #ifndef __ASM_IRQ_H
 #define __ASM_IRQ_H
 
-#include <linux/irqchip/arm-gic-acpi.h>
-
 #include <asm-generic/irq.h>
 
 struct pt_regs;
 
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 
-static inline void acpi_irq_init(void)
-{
-	/*
-	 * Hardcode ACPI IRQ chip initialization to GICv2 for now.
-	 * Proper irqchip infrastructure will be implemented along with
-	 * incoming  GICv2m|GICv3|ITS bits.
-	 */
-	acpi_gic_init();
-}
-#define acpi_irq_init acpi_irq_init
-
 #endif

arch/arm64/kernel/acpi.c

@@ -211,31 +211,6 @@ void __init acpi_boot_table_init(void)
 	}
 }
 
-void __init acpi_gic_init(void)
-{
-	struct acpi_table_header *table;
-	acpi_status status;
-	acpi_size tbl_size;
-	int err;
-
-	if (acpi_disabled)
-		return;
-
-	status = acpi_get_table_with_size(ACPI_SIG_MADT, 0, &table, &tbl_size);
-	if (ACPI_FAILURE(status)) {
-		const char *msg = acpi_format_exception(status);
-
-		pr_err("Failed to get MADT table, %s\n", msg);
-		return;
-	}
-
-	err = gic_v2_acpi_init(table);
-	if (err)
-		pr_err("Failed to initialize GIC IRQ controller");
-
-	early_acpi_os_unmap_memory((char *)table, tbl_size);
-}
-
 #ifdef CONFIG_ACPI_APEI
 pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr)
 {

arch/arm64/kernel/time.c

@@ -67,16 +67,10 @@ void __init time_init(void)
 	u32 arch_timer_rate;
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 
 	tick_setup_hrtimer_broadcast();
 
-	/*
-	 * Since ACPI or FDT will only one be available in the system,
-	 * we can use acpi_generic_timer_init() here safely
-	 */
-	acpi_generic_timer_init();
-
 	arch_timer_rate = arch_timer_get_rate();
 	if (!arch_timer_rate)
 		panic("Unable to initialise architected timer.\n");

arch/ia64/include/asm/pci.h

@@ -64,11 +64,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 #define pci_legacy_read platform_pci_legacy_read
 #define pci_legacy_write platform_pci_legacy_write
 
-struct iospace_resource {
-	struct list_head list;
-	struct resource res;
-};
-
 struct pci_controller {
 	struct acpi_device *companion;
 	void *iommu;

arch/microblaze/kernel/setup.c

@@ -194,7 +194,7 @@ void __init time_init(void)
 {
 	of_clk_init(NULL);
 	setup_cpuinfo_clk();
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 #ifdef CONFIG_DEBUG_FS

arch/mips/pistachio/time.c

@@ -39,7 +39,7 @@ void __init plat_time_init(void)
 	struct clk *clk;
 
 	of_clk_init(NULL);
-	clocksource_of_init();
+	clocksource_probe();
 
 	np = of_get_cpu_node(0, NULL);
 	if (!np) {

arch/mips/ralink/clk.c

@@ -75,5 +75,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
-	clocksource_of_init();
+	clocksource_probe();
 }

arch/nios2/kernel/time.c

@@ -324,7 +324,7 @@ void __init time_init(void)
 	if (count < 2)
 		panic("%d timer is found, it needs 2 timers in system\n", count);
 
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 CLOCKSOURCE_OF_DECLARE(nios2_timer, ALTR_TIMER_COMPATIBLE, nios2_time_init);

arch/x86/include/asm/msr-index.h

@@ -206,6 +206,13 @@
 #define MSR_GFX_PERF_LIMIT_REASONS	0x000006B0
 #define MSR_RING_PERF_LIMIT_REASONS	0x000006B1
 
+/* Config TDP MSRs */
+#define MSR_CONFIG_TDP_NOMINAL		0x00000648
+#define MSR_CONFIG_TDP_LEVEL1		0x00000649
+#define MSR_CONFIG_TDP_LEVEL2		0x0000064A
+#define MSR_CONFIG_TDP_CONTROL		0x0000064B
+#define MSR_TURBO_ACTIVATION_RATIO	0x0000064C
+
 /* Hardware P state interface */
 #define MSR_PPERF			0x0000064e
 #define MSR_PERF_LIMIT_REASONS		0x0000064f

arch/x86/kernel/acpi/boot.c

@@ -976,6 +976,8 @@ static int __init acpi_parse_madt_lapic_entries(void)
 {
 	int count;
 	int x2count = 0;
+	int ret;
+	struct acpi_subtable_proc madt_proc[2];
 
 	if (!cpu_has_apic)
 		return -ENODEV;
@@ -999,10 +1001,22 @@ static int __init acpi_parse_madt_lapic_entries(void)
 				      acpi_parse_sapic, MAX_LOCAL_APIC);
 
 	if (!count) {
-		x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC,
-					acpi_parse_x2apic, MAX_LOCAL_APIC);
-		count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
-					acpi_parse_lapic, MAX_LOCAL_APIC);
+		memset(madt_proc, 0, sizeof(madt_proc));
+		madt_proc[0].id = ACPI_MADT_TYPE_LOCAL_APIC;
+		madt_proc[0].handler = acpi_parse_lapic;
+		madt_proc[1].id = ACPI_MADT_TYPE_LOCAL_X2APIC;
+		madt_proc[1].handler = acpi_parse_x2apic;
+		ret = acpi_table_parse_entries_array(ACPI_SIG_MADT,
+				sizeof(struct acpi_table_madt),
+				madt_proc, ARRAY_SIZE(madt_proc), MAX_LOCAL_APIC);
+		if (ret < 0) {
+			printk(KERN_ERR PREFIX
+					"Error parsing LAPIC/X2APIC entries\n");
+			return ret;
+		}
+
+		x2count = madt_proc[0].count;
+		count = madt_proc[1].count;
 	}
 	if (!count && !x2count) {
 		printk(KERN_ERR PREFIX "No LAPIC entries present\n");

arch/xtensa/kernel/time.c

@@ -148,7 +148,7 @@ void __init time_init(void)
 	local_timer_setup(0);
 	setup_irq(this_cpu_ptr(&ccount_timer)->evt.irq, &timer_irqaction);
 	sched_clock_register(ccount_sched_clock_read, 32, ccount_freq);
-	clocksource_of_init();
+	clocksource_probe();
 }
 
 /*

drivers/acpi/Kconfig

@@ -57,6 +57,15 @@ config ACPI_SYSTEM_POWER_STATES_SUPPORT
 config ACPI_CCA_REQUIRED
 	bool
 
+config ACPI_DEBUGGER
+	bool "In-kernel debugger (EXPERIMENTAL)"
+	select ACPI_DEBUG
+	help
+	  Enable in-kernel debugging facilities: statistics, internal
+	  object dump, single step control method execution.
+	  This is still under development, currently enabling this only
+	  results in the compilation of the ACPICA debugger files.
+
 config ACPI_SLEEP
 	bool
 	depends on SUSPEND || HIBERNATION
@@ -197,11 +206,25 @@ config ACPI_PROCESSOR_IDLE
 	bool
 	select CPU_IDLE
 
+config ACPI_CPPC_LIB
+	bool
+	depends on ACPI_PROCESSOR
+	depends on !ACPI_CPU_FREQ_PSS
+	select MAILBOX
+	select PCC
+	help
+	  If this option is enabled, this file implements common functionality
+	  to parse CPPC tables as described in the ACPI 5.1+ spec. The
+	  routines implemented are meant to be used by other
+	  drivers to control CPU performance using CPPC semantics.
+	  If your platform does not support CPPC in firmware,
+	  leave this option disabled.
+
 config ACPI_PROCESSOR
 	tristate "Processor"
-	depends on X86 || IA64
-	select ACPI_PROCESSOR_IDLE
-	select ACPI_CPU_FREQ_PSS
+	depends on X86 || IA64 || ARM64
+	select ACPI_PROCESSOR_IDLE if X86 || IA64
+	select ACPI_CPU_FREQ_PSS if X86 || IA64
 	default y
 	help
 	  This driver adds support for the ACPI Processor package. It is required

drivers/acpi/Makefile

@@ -78,6 +78,7 @@ obj-$(CONFIG_ACPI_HED)		+= hed.o
 obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
 obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
+obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc_acpi.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o

drivers/acpi/acpi_lpss.c

@@ -664,7 +664,7 @@ static struct dev_pm_domain acpi_lpss_pm_domain = {
 #ifdef CONFIG_PM
 #ifdef CONFIG_PM_SLEEP
 		.prepare = acpi_subsys_prepare,
-		.complete = acpi_subsys_complete,
+		.complete = pm_complete_with_resume_check,
 		.suspend = acpi_subsys_suspend,
 		.suspend_late = acpi_lpss_suspend_late,
 		.resume_early = acpi_lpss_resume_early,

drivers/acpi/acpi_pad.c

@@ -148,8 +148,6 @@ static int power_saving_thread(void *data)
 	while (!kthread_should_stop()) {
 		unsigned long expire_time;
 
-		try_to_freeze();
-
 		/* round robin to cpus */
 		expire_time = last_jiffies + round_robin_time * HZ;
 		if (time_before(expire_time, jiffies)) {

drivers/acpi/acpi_pnp.c

@@ -316,7 +316,7 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
 	{""},
 };
 
-static bool matching_id(char *idstr, char *list_id)
+static bool matching_id(const char *idstr, const char *list_id)
 {
 	int i;
 
@@ -333,7 +333,7 @@ static bool matching_id(char *idstr, char *list_id)
 	return true;
 }
 
-static bool acpi_pnp_match(char *idstr, const struct acpi_device_id **matchid)
+static bool acpi_pnp_match(const char *idstr, const struct acpi_device_id **matchid)
 {
 	const struct acpi_device_id *devid;
 

drivers/acpi/acpi_processor.c

@@ -164,6 +164,24 @@ static int acpi_processor_errata(void)
    -------------------------------------------------------------------------- */
 
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
+int __weak acpi_map_cpu(acpi_handle handle,
+		phys_cpuid_t physid, int *pcpu)
+{
+	return -ENODEV;
+}
+
+int __weak acpi_unmap_cpu(int cpu)
+{
+	return -ENODEV;
+}
+
+int __weak arch_register_cpu(int cpu)
+{
+	return -ENODEV;
+}
+
+void __weak arch_unregister_cpu(int cpu) {}
+
 static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 {
 	unsigned long long sta;

drivers/acpi/acpica/Makefile

@@ -123,7 +123,6 @@ acpi-y +=		\
 	rsaddr.o	\
 	rscalc.o	\
 	rscreate.o	\
-	rsdump.o	\
 	rsdumpinfo.o	\
 	rsinfo.o	\
 	rsio.o		\
@@ -178,7 +177,24 @@ acpi-y +=		\
 	utxferror.o	\
 	utxfmutex.o
 
+acpi-$(CONFIG_ACPI_DEBUGGER) +=	\
+	dbcmds.o		\
+	dbconvert.o		\
+	dbdisply.o		\
+	dbexec.o		\
+	dbhistry.o		\
+	dbinput.o		\
+	dbmethod.o		\
+	dbnames.o		\
+	dbobject.o		\
+	dbstats.o		\
+	dbutils.o		\
+	dbxface.o		\
+	rsdump.o		\
+
 acpi-$(ACPI_FUTURE_USAGE) +=	\
+	dbfileio.o		\
+	dbtest.o		\
 	utcache.o		\
 	utfileio.o		\
 	utprint.o		\

drivers/acpi/acpica/acapps.h

@@ -88,7 +88,7 @@
 	acpi_os_printf (" %-18s%s\n", name, description);
 
 #define FILE_SUFFIX_DISASSEMBLY     "dsl"
-#define ACPI_TABLE_FILE_SUFFIX      ".dat"
+#define FILE_SUFFIX_BINARY_TABLE    ".dat"	/* Needs the dot */
 
 /*
  * getopt

drivers/acpi/acpica/acdebug.h

@@ -44,6 +44,12 @@
 #ifndef __ACDEBUG_H__
 #define __ACDEBUG_H__
 
+/* The debugger is used in conjunction with the disassembler most of time */
+
+#ifdef ACPI_DISASSEMBLER
+#include "acdisasm.h"
+#endif
+
 #define ACPI_DEBUG_BUFFER_SIZE  0x4000	/* 16K buffer for return objects */
 
 struct acpi_db_command_info {

drivers/acpi/acpica/acglobal.h

@@ -325,9 +325,9 @@ ACPI_GLOBAL(struct acpi_external_file *, acpi_gbl_external_file_list);
 
 #ifdef ACPI_DEBUGGER
 
-ACPI_INIT_GLOBAL(u8, acpi_gbl_db_terminate_threads, FALSE);
 ACPI_INIT_GLOBAL(u8, acpi_gbl_abort_method, FALSE);
 ACPI_INIT_GLOBAL(u8, acpi_gbl_method_executing, FALSE);
+ACPI_INIT_GLOBAL(acpi_thread_id, acpi_gbl_db_thread_id, ACPI_INVALID_THREAD_ID);
 
 ACPI_GLOBAL(u8, acpi_gbl_db_opt_no_ini_methods);
 ACPI_GLOBAL(u8, acpi_gbl_db_opt_no_region_support);
@@ -337,6 +337,8 @@ ACPI_GLOBAL(char *, acpi_gbl_db_filename);
 ACPI_GLOBAL(u32, acpi_gbl_db_debug_level);
 ACPI_GLOBAL(u32, acpi_gbl_db_console_debug_level);
 ACPI_GLOBAL(struct acpi_namespace_node *, acpi_gbl_db_scope_node);
+ACPI_GLOBAL(u8, acpi_gbl_db_terminate_loop);
+ACPI_GLOBAL(u8, acpi_gbl_db_threads_terminated);
 
 ACPI_GLOBAL(char *, acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS]);
 ACPI_GLOBAL(acpi_object_type, acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS]);
@@ -358,6 +360,9 @@ ACPI_GLOBAL(u16, acpi_gbl_node_type_count_misc);
 ACPI_GLOBAL(u32, acpi_gbl_num_nodes);
 ACPI_GLOBAL(u32, acpi_gbl_num_objects);
 
+ACPI_GLOBAL(acpi_mutex, acpi_gbl_db_command_ready);
+ACPI_GLOBAL(acpi_mutex, acpi_gbl_db_command_complete);
+
 #endif				/* ACPI_DEBUGGER */
 
 /*****************************************************************************

drivers/acpi/acpica/acinterp.h

@@ -397,12 +397,10 @@ void
 acpi_ex_dump_operands(union acpi_operand_object **operands,
 		      const char *opcode_name, u32 num_opcodes);
 
-#ifdef	ACPI_FUTURE_USAGE
 void
 acpi_ex_dump_object_descriptor(union acpi_operand_object *object, u32 flags);
 
 void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags);
-#endif				/* ACPI_FUTURE_USAGE */
 
 /*
  * exnames - AML namestring support

drivers/acpi/acpica/aclocal.h

@@ -83,10 +83,8 @@ union acpi_parse_object;
 #define ACPI_MTX_EVENTS                 3	/* Data for ACPI events */
 #define ACPI_MTX_CACHES                 4	/* Internal caches, general purposes */
 #define ACPI_MTX_MEMORY                 5	/* Debug memory tracking lists */
-#define ACPI_MTX_DEBUG_CMD_COMPLETE     6	/* AML debugger */
-#define ACPI_MTX_DEBUG_CMD_READY        7	/* AML debugger */
 
-#define ACPI_MAX_MUTEX                  7
+#define ACPI_MAX_MUTEX                  5
 #define ACPI_NUM_MUTEX                  ACPI_MAX_MUTEX+1
 
 /* Lock structure for reader/writer interfaces */
@@ -111,6 +109,14 @@ struct acpi_rw_lock {
 
 #define ACPI_MUTEX_NOT_ACQUIRED         (acpi_thread_id) 0
 
+/* This Thread ID means an invalid thread ID */
+
+#ifdef ACPI_OS_INVALID_THREAD_ID
+#define ACPI_INVALID_THREAD_ID          ACPI_OS_INVALID_THREAD_ID
+#else
+#define ACPI_INVALID_THREAD_ID          ((acpi_thread_id) 0xFFFFFFFF)
+#endif
+
 /* Table for the global mutexes */
 
 struct acpi_mutex_info {
@@ -287,13 +293,17 @@ acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
 #define ACPI_BTYPE_BUFFER_FIELD         0x00002000
 #define ACPI_BTYPE_DDB_HANDLE           0x00004000
 #define ACPI_BTYPE_DEBUG_OBJECT         0x00008000
-#define ACPI_BTYPE_REFERENCE            0x00010000
+#define ACPI_BTYPE_REFERENCE_OBJECT     0x00010000	/* From Index(), ref_of(), etc (type6_opcodes) */
 #define ACPI_BTYPE_RESOURCE             0x00020000
+#define ACPI_BTYPE_NAMED_REFERENCE      0x00040000	/* Generic unresolved Name or Namepath */
 
 #define ACPI_BTYPE_COMPUTE_DATA         (ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_BUFFER)
 
 #define ACPI_BTYPE_DATA                 (ACPI_BTYPE_COMPUTE_DATA  | ACPI_BTYPE_PACKAGE)
-#define ACPI_BTYPE_DATA_REFERENCE       (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE | ACPI_BTYPE_DDB_HANDLE)
+
+	/* Used by Copy, de_ref_of, Store, Printf, Fprintf */
+
+#define ACPI_BTYPE_DATA_REFERENCE       (ACPI_BTYPE_DATA | ACPI_BTYPE_REFERENCE_OBJECT | ACPI_BTYPE_DDB_HANDLE)
 #define ACPI_BTYPE_DEVICE_OBJECTS       (ACPI_BTYPE_DEVICE | ACPI_BTYPE_THERMAL | ACPI_BTYPE_PROCESSOR)
 #define ACPI_BTYPE_OBJECTS_AND_REFS     0x0001FFFF	/* ARG or LOCAL */
 #define ACPI_BTYPE_ALL_OBJECTS          0x0000FFFF
@@ -848,7 +858,7 @@ struct acpi_parse_state {
 #define ACPI_PARSEOP_PARAMLIST          0x02
 #define ACPI_PARSEOP_EMPTY_TERMLIST     0x04
 #define ACPI_PARSEOP_PREDEF_CHECKED     0x08
-#define ACPI_PARSEOP_SPECIAL            0x10
+#define ACPI_PARSEOP_CLOSING_PAREN      0x10
 #define ACPI_PARSEOP_COMPOUND           0x20
 #define ACPI_PARSEOP_ASSIGNMENT         0x40
 

drivers/acpi/acpica/acnamesp.h

@@ -193,9 +193,7 @@ acpi_ns_convert_to_resource(union acpi_operand_object *original_object,
 /*
  * nsdump - Namespace dump/print utilities
  */
-#ifdef	ACPI_FUTURE_USAGE
 void acpi_ns_dump_tables(acpi_handle search_base, u32 max_depth);
-#endif				/* ACPI_FUTURE_USAGE */
 
 void acpi_ns_dump_entry(acpi_handle handle, u32 debug_level);
 
@@ -208,7 +206,6 @@ acpi_status
 acpi_ns_dump_one_object(acpi_handle obj_handle,
 			u32 level, void *context, void **return_value);
 
-#ifdef	ACPI_FUTURE_USAGE
 void
 acpi_ns_dump_objects(acpi_object_type type,
 		     u8 display_type,
@@ -220,7 +217,6 @@ acpi_ns_dump_object_paths(acpi_object_type type,
 			  u8 display_type,
 			  u32 max_depth,
 			  acpi_owner_id owner_id, acpi_handle start_handle);
-#endif				/* ACPI_FUTURE_USAGE */
 
 /*
  * nseval - Namespace evaluation functions

drivers/acpi/acpica/acopcode.h

@@ -211,7 +211,7 @@
 #define ARGI_ARG4                       ARG_NONE
 #define ARGI_ARG5                       ARG_NONE
 #define ARGI_ARG6                       ARG_NONE
-#define ARGI_BANK_FIELD_OP              ARGI_INVALID_OPCODE
+#define ARGI_BANK_FIELD_OP              ARGI_LIST1 (ARGI_INTEGER)
 #define ARGI_BIT_AND_OP                 ARGI_LIST3 (ARGI_INTEGER,    ARGI_INTEGER,       ARGI_TARGETREF)
 #define ARGI_BIT_NAND_OP                ARGI_LIST3 (ARGI_INTEGER,    ARGI_INTEGER,       ARGI_TARGETREF)
 #define ARGI_BIT_NOR_OP                 ARGI_LIST3 (ARGI_INTEGER,    ARGI_INTEGER,       ARGI_TARGETREF)
@@ -307,7 +307,7 @@
 #define ARGI_SLEEP_OP                   ARGI_LIST1 (ARGI_INTEGER)
 #define ARGI_STALL_OP                   ARGI_LIST1 (ARGI_INTEGER)
 #define ARGI_STATICSTRING_OP            ARGI_INVALID_OPCODE
-#define ARGI_STORE_OP                   ARGI_LIST2 (ARGI_DATAREFOBJ, ARGI_TARGETREF)
+#define ARGI_STORE_OP                   ARGI_LIST2 (ARGI_DATAREFOBJ, ARGI_STORE_TARGET)
 #define ARGI_STRING_OP                  ARGI_INVALID_OPCODE
 #define ARGI_SUBTRACT_OP                ARGI_LIST3 (ARGI_INTEGER,    ARGI_INTEGER,       ARGI_TARGETREF)
 #define ARGI_THERMAL_ZONE_OP            ARGI_INVALID_OPCODE

drivers/acpi/acpica/acparser.h

@@ -194,10 +194,8 @@ union acpi_parse_object *acpi_ps_find(union acpi_parse_object *scope,
 
 union acpi_parse_object *acpi_ps_get_arg(union acpi_parse_object *op, u32 argn);
 
-#ifdef	ACPI_FUTURE_USAGE
 union acpi_parse_object *acpi_ps_get_depth_next(union acpi_parse_object *origin,
 						union acpi_parse_object *op);
-#endif				/* ACPI_FUTURE_USAGE */
 
 /*
  * pswalk - parse tree walk routines
@@ -235,9 +233,7 @@ void acpi_ps_free_op(union acpi_parse_object *op);
 
 u8 acpi_ps_is_leading_char(u32 c);
 
-#ifdef	ACPI_FUTURE_USAGE
 u32 acpi_ps_get_name(union acpi_parse_object *op);
-#endif				/* ACPI_FUTURE_USAGE */
 
 void acpi_ps_set_name(union acpi_parse_object *op, u32 name);
 

drivers/acpi/acpica/acutils.h

@@ -635,9 +635,7 @@ void
 acpi_ut_free_and_track(void *address,
 		       u32 component, const char *module, u32 line);
 
-#ifdef	ACPI_FUTURE_USAGE
 void acpi_ut_dump_allocation_info(void);
-#endif				/* ACPI_FUTURE_USAGE */
 
 void acpi_ut_dump_allocations(u32 component, const char *module);
 

drivers/acpi/acpica/amlcode.h

@@ -277,14 +277,15 @@
 #define ARGI_TARGETREF              0x0F	/* Target, subject to implicit conversion */
 #define ARGI_FIXED_TARGET           0x10	/* Target, no implicit conversion */
 #define ARGI_SIMPLE_TARGET          0x11	/* Name, Local, Arg -- no implicit conversion */
+#define ARGI_STORE_TARGET           0x12	/* Target for store is TARGETREF + package objects */
 
 /* Multiple/complex types */
 
-#define ARGI_DATAOBJECT             0x12	/* Buffer, String, package or reference to a node - Used only by size_of operator */
-#define ARGI_COMPLEXOBJ             0x13	/* Buffer, String, or package (Used by INDEX op only) */
-#define ARGI_REF_OR_STRING          0x14	/* Reference or String (Used by DEREFOF op only) */
-#define ARGI_REGION_OR_BUFFER       0x15	/* Used by LOAD op only */
-#define ARGI_DATAREFOBJ             0x16
+#define ARGI_DATAOBJECT             0x13	/* Buffer, String, package or reference to a node - Used only by size_of operator */
+#define ARGI_COMPLEXOBJ             0x14	/* Buffer, String, or package (Used by INDEX op only) */
+#define ARGI_REF_OR_STRING          0x15	/* Reference or String (Used by DEREFOF op only) */
+#define ARGI_REGION_OR_BUFFER       0x16	/* Used by LOAD op only */
+#define ARGI_DATAREFOBJ             0x17
 
 /* Note: types above can expand to 0x1F maximum */