Commit 0d876c6a authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: corgi backlight driver should not select ssp drivers
  [ARM] 5321/1: Kirkwood: fix typo in Makefile
  [ARM] 5320/1: fix assembly constraints in implementation of do_div()
  [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.S
  [ARM] 5316/1: AT91: oops (regression) fix on gpio irq
  [ARM] msm: vreg interface to msm7k pmic
  [ARM] msm: dma: various basic dma improvements and bugfixes
  [ARM] msm: clock: provide clk_*() api support for
  [ARM] msm: clean up iomap and devices
  [ARM] msm: add proc_comm support, necessary for clock and power control
  [ARM] msm: rename ARCH_MSM7X00A to ARCH_MSM
  [ARM] pxa/spitz: fix unbalance parenthesis in header file spitz.h
  [ARM] pxa: update {corgi,spitz}_defconfig to favor SPI-based drivers
  [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig
  Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"
parents 900bca34 6ffab0ef
......@@ -540,16 +540,15 @@ config ARCH_OMAP
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
config ARCH_MSM7X00A
bool "Qualcomm MSM7X00A"
config ARCH_MSM
bool "Qualcomm MSM"
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for Qualcomm MSM7X00A based systems. This runs on the ARM11
apps processor of the MSM7X00A and depends on a shared memory
Support for Qualcomm MSM7K based systems. This runs on the ARM11
apps processor of the MSM7K and depends on a shared memory
interface to the ARM9 modem processor which runs the baseband stack
and controls some vital subsystems (clock and power control, etc).
<http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
endchoice
......
......@@ -141,7 +141,7 @@ endif
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_ORION5X) := orion5x
plat-$(CONFIG_PLAT_ORION) := orion
machine-$(CONFIG_ARCH_MSM7X00A) := msm
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc2
# Mon Nov 28 10:30:09 2005
# Linux kernel version: 2.6.27
# Mon Oct 20 10:12:23 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_UID16=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
......@@ -79,50 +119,97 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_MSM7X00A is not set
#
# Intel PXA2xx Implementations
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
CONFIG_PXA_SHARPSL=y
CONFIG_PXA_SHARPSL_25x=y
# CONFIG_PXA_SHARPSL_27x is not set
CONFIG_MACH_POODLE=y
CONFIG_MACH_CORGI=y
CONFIG_MACH_SHEPHERD=y
CONFIG_MACH_HUSKY=y
# CONFIG_MACH_AKITA is not set
# CONFIG_MACH_SPITZ is not set
# CONFIG_MACH_BORZOI is not set
CONFIG_MACH_TOSA=y
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_CM_X300 is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_PXA_EZX is not set
CONFIG_PXA25x=y
CONFIG_PXA_SHARP_C7xx=y
CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
# CONFIG_TOSA_BT is not set
CONFIG_PXA_HAVE_BOARD_IRQS=y
#
# Boot options
#
#
# Power management
#
#
# Processor Type
......@@ -131,25 +218,30 @@ CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
CONFIG_SHARP_LOCOMO=y
CONFIG_SHARP_PARAM=y
CONFIG_SHARPSL_PM=y
CONFIG_SHARP_SCOOP=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
......@@ -164,16 +256,32 @@ CONFIG_PCMCIA_PXA2XX=y
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -183,6 +291,13 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
......@@ -199,6 +314,7 @@ CONFIG_FPE_NWFPE=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
# CONFIG_ARTHUR is not set
......@@ -207,12 +323,12 @@ CONFIG_BINFMT_MISC=m
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_APM=y
#
# Networking
#
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
......@@ -223,6 +339,10 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
......@@ -236,140 +356,131 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_TOS is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_TARGET_NOTRACK is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_MARK is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
......@@ -377,21 +488,16 @@ CONFIG_IP6_NF_RAW=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
......@@ -421,27 +527,17 @@ CONFIG_IRCOMM=m
#
# Dongle support
#
#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set
#
# Old Serial dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_PXA_FICP=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
......@@ -457,9 +553,12 @@ CONFIG_BT_HIDP=m
#
CONFIG_BT_HCIUSB=m
# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
......@@ -468,11 +567,20 @@ CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
......@@ -481,19 +589,16 @@ CONFIG_IEEE80211_CRYPT_WEP=m
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
......@@ -501,16 +606,20 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
......@@ -535,16 +644,18 @@ CONFIG_MTD_ROM=y
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SHARP_SL=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
......@@ -553,78 +664,66 @@ CONFIG_MTD_SHARP_SL=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_SHARPSL=y
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
......@@ -644,121 +743,76 @@ CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transport Attributes
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
# Wireless LAN
#
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
......@@ -768,10 +822,6 @@ CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
......@@ -782,30 +832,29 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
......@@ -814,19 +863,39 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LOCOMO is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_CORGI=y
CONFIG_KEYBOARD_SPITZ=y
CONFIG_KEYBOARD_TOSA=y
# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_CORGI=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_CORGI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
......@@ -839,8 +908,11 @@ CONFIG_INPUT_UINPUT=m
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -849,6 +921,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -860,97 +933,130 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Algorithms
# I2C Hardware Bus support
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# Hardware Monitoring support
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_PXA2XX=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
......@@ -960,70 +1066,193 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Misc devices
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multimedia Capabilities Port drivers
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_VIDEO_AUDIO_DECODER is not set
# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
#
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_PXA is not set
# CONFIG_FB_MBX is not set
CONFIG_FB_W100=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_CORGI=y
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_LOCOMO=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
......@@ -1031,6 +1260,7 @@ CONFIG_FB_W100=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
......@@ -1043,93 +1273,95 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CORGI=y
#
# Sound
#
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# Advanced Linux Sound Architecture
# USB Input Devices
#
# CONFIG_SND is not set
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Open Sound System
# USB HID Boot Protocol drivers
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_ADLIB is not set
# CONFIG_SOUND_ACI_MIXER is not set
# CONFIG_SOUND_CS4232 is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_NM256 is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_AWE32_SYNTH is not set
# CONFIG_SOUND_WAVEFRONT is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_SOUND_TVMIXER is not set
# CONFIG_SOUND_AD1980 is not set
#
# USB support
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
......@@ -1148,33 +1380,11 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
......@@ -1182,57 +1392,23 @@ CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
# CONFIG_USB_PWC is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
......@@ -1240,6 +1416,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
......@@ -1257,50 +1434,68 @@ CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
CONFIG_USB_GADGET_PXA2XX=y
CONFIG_USB_PXA2XX=y
# CONFIG_USB_PXA2XX_SMALL is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
CONFIG_USB_GADGET_PXA25X=y
CONFIG_USB_PXA25X=y
# CONFIG_USB_PXA25X_SMALL is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
CONFIG_USB_ZERO=m
......@@ -1310,15 +1505,42 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card support
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
# File systems
......@@ -1327,16 +1549,17 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
......@@ -1361,11 +1584,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1377,39 +1602,42 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
......@@ -1419,7 +1647,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1439,11 +1666,9 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
......@@ -1484,35 +1709,71 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
......@@ -1521,46 +1782,113 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Cryptographic options
# Crypto core or helper
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_LZO is not set
#
# Hardware crypto devices
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
......@@ -133,7 +133,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
CONFIG_ARCH_MSM7X00A=y
CONFIG_ARCH_MSM=y
#
# Boot options
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc2
# Mon Nov 28 10:26:52 2005
# Linux kernel version: 2.6.27
# Mon Oct 20 10:25:37 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_UID16=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
......@@ -79,49 +119,95 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_MSM7X00A is not set
#
# Intel PXA2xx Implementations
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
CONFIG_PXA_SHARPSL=y
# CONFIG_PXA_SHARPSL_25x is not set
CONFIG_PXA_SHARPSL_27x=y
# CONFIG_MACH_POODLE is not set
# CONFIG_MACH_CORGI is not set
# CONFIG_MACH_SHEPHERD is not set
# CONFIG_MACH_HUSKY is not set
CONFIG_MACH_AKITA=y
CONFIG_MACH_SPITZ=y
CONFIG_MACH_BORZOI=y
# CONFIG_MACH_TOSA is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_CM_X300 is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_PXA_EZX is not set
CONFIG_PXA27x=y
CONFIG_IWMMXT=y
CONFIG_PXA_SHARP_Cxx00=y
CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
#
# Boot options
#
#
# Power management
#
#
# Processor Type
......@@ -130,25 +216,29 @@ CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
CONFIG_SHARP_PARAM=y
CONFIG_SHARPSL_PM=y
CONFIG_SHARP_SCOOP=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
......@@ -163,16 +253,32 @@ CONFIG_PCMCIA_PXA2XX=y
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
......@@ -182,6 +288,13 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
......@@ -198,6 +311,7 @@ CONFIG_FPE_NWFPE=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
# CONFIG_ARTHUR is not set
......@@ -206,12 +320,12 @@ CONFIG_BINFMT_MISC=m
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
CONFIG_APM=y
#
# Networking
#
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
......@@ -222,6 +336,10 @@ CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
......@@ -235,140 +353,131 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
# CONFIG_IP_NF_MATCH_AH is not set
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_TOS is not set
# CONFIG_IP_NF_TARGET_ECN is not set
# CONFIG_IP_NF_TARGET_DSCP is not set
# CONFIG_IP_NF_TARGET_MARK is not set
# CONFIG_IP_NF_TARGET_CLASSIFY is not set
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_TARGET_NOTRACK is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
# CONFIG_IP6_NF_MATCH_AH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_MARK is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
......@@ -376,21 +485,16 @@ CONFIG_IP6_NF_RAW=m
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
......@@ -420,27 +524,17 @@ CONFIG_IRCOMM=m
#
# Dongle support
#
#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set
#
# Old Serial dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_PXA_FICP=m
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
......@@ -456,9 +550,12 @@ CONFIG_BT_HIDP=m
#
CONFIG_BT_HCIUSB=m
# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
......@@ -467,11 +564,20 @@ CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
......@@ -480,19 +586,16 @@ CONFIG_IEEE80211_CRYPT_WEP=m
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
......@@ -500,16 +603,20 @@ CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
......@@ -534,16 +641,18 @@ CONFIG_MTD_ROM=y
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SHARP_SL=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
......@@ -552,78 +661,66 @@ CONFIG_MTD_SHARP_SL=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_SHARPSL=y
# CONFIG_MTD_NAND_NANDSIM is not set
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
......@@ -643,121 +740,76 @@ CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transport Attributes
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# PHY device support
#
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
......@@ -767,10 +819,6 @@ CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
......@@ -781,31 +829,29 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_POWER is not set
# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
......@@ -816,17 +862,35 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_CORGI is not set
CONFIG_KEYBOARD_SPITZ=y
# CONFIG_KEYBOARD_PXA27x is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_CORGI=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_CORGI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
......@@ -839,8 +903,11 @@ CONFIG_INPUT_UINPUT=m
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -849,6 +916,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -860,101 +928,253 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Algorithms
# I2C Hardware Bus support
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Hardware Monitoring support
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
CONFIG_SPI_PXA2XX=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Misc devices
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multimedia Capabilities Port drivers
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Digital Video Broadcasting Devices
# Multimedia drivers
#
# CONFIG_DVB is not set
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_CORGI=y
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
......@@ -962,6 +1182,7 @@ CONFIG_FB_PXA=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
......@@ -974,55 +1195,96 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# Logo configuration
# USB Input Devices
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y
CONFIG_BACKLIGHT_CORGI=y
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Sound
# USB HID Boot Protocol drivers
#
# CONFIG_SOUND is not set
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
#
# USB support
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_THRUSTMASTER_FF=m
CONFIG_ZEROPLUS_FF=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
......@@ -1041,33 +1303,11 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
# CONFIG_USB_ITMTOUCH is not set
CONFIG_USB_EGALAX=m
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
......@@ -1075,52 +1315,23 @@ CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
......@@ -1128,6 +1339,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
......@@ -1145,49 +1357,66 @@ CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
CONFIG_USB_GADGET_DUMMY_HCD=y
CONFIG_USB_DUMMY_HCD=m
CONFIG_USB_GADGET_DUALSPEED=y
......@@ -1198,15 +1427,42 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card support
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
# File systems
......@@ -1218,18 +1474,19 @@ CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
......@@ -1254,11 +1511,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -1270,39 +1529,42 @@ CONFIG_RAMFS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
......@@ -1312,7 +1574,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
......@@ -1332,11 +1593,9 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
......@@ -1377,35 +1636,71 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_USER is not set
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
......@@ -1414,46 +1709,113 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Cryptographic options
# Crypto core or helper
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_LZO is not set
#
# Hardware crypto devices
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
......@@ -165,7 +165,7 @@
__res = __m; \
asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \
"mov %Q0, #0" \
: "+r" (__res) \
: "+&r" (__res) \
: "r" (__m), "r" (__n) \
: "cc" ); \
} else { \
......@@ -182,7 +182,7 @@
"umlal %R0, %Q0, %Q1, %R2\n\t" \
"mov %R0, #0\n\t" \
"umlal %Q0, %R0, %R1, %R2" \
: "+r" (__res) \
: "+&r" (__res) \
: "r" (__m), "r" (__n) \
: "cc" ); \
} else { \
......@@ -192,7 +192,7 @@
"adds %Q0, %1, %Q0\n\t" \
"adc %R0, %R0, #0\n\t" \
"umlal %Q0, %R0, %R2, %R3" \
: "+r" (__res), "+r" (__z) \
: "+&r" (__res), "+&r" (__z) \
: "r" (__m), "r" (__n) \
: "cc" ); \
} \
......
......@@ -404,6 +404,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
pin = bank->chipbase;
gpio = &irq_desc[pin];
while (isr) {
if (isr & 1) {
......
......@@ -2,4 +2,4 @@ obj-y += common.o addr-map.o irq.o pcie.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6281-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
if ARCH_MSM7X00A
if ARCH_MSM
comment "MSM7X00A Board Type"
depends on ARCH_MSM7X00A
comment "MSM Board Type"
depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM7X00A
depends on ARCH_MSM
default y
bool "Halibut Board (QCT SURF7200A)"
bool "Halibut Board (QCT SURF7201A)"
help
Support for the Qualcomm SURF7200A eval board.
config MSM7X00A_IDLE
depends on ARCH_MSM7X00A
default y
bool "Idle Support for MSM7X00A"
Support for the Qualcomm SURF7201A eval board.
endif
obj-y += io.o idle.o irq.o timer.o dma.o
# Common code for board init
obj-y += common.o
obj-y += devices.o
obj-y += proc_comm.o
obj-y += vreg.o
obj-y += clock.o clock-7x01a.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
......@@ -33,6 +33,8 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include "devices.h"
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x9C004300,
......@@ -53,31 +55,12 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources,
};
static void mddi0_panel_power(int on)
{
}
static struct msm_mddi_platform_data msm_mddi0_pdata = {
.panel_power = mddi0_panel_power,
.has_vsync_irq = 0,
};
static struct platform_device msm_mddi0_device = {
.name = "msm_mddi",
.id = 0,
.dev = {
.platform_data = &msm_mddi0_pdata
},
};
static struct platform_device msm_serial0_device = {
.name = "msm_serial",
.id = 0,
};
static struct platform_device *devices[] __initdata = {
&msm_serial0_device,
&msm_mddi0_device,
&msm_device_uart3,
&msm_device_smd,
&msm_device_nand,
&msm_device_hsusb,
&msm_device_i2c,
&smc91x_device,
};
......@@ -91,20 +74,15 @@ static void __init halibut_init_irq(void)
static void __init halibut_init(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
msm_add_devices();
}
static void __init halibut_map_io(void)
{
msm_map_common_io();
msm_clock_init();
}
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
/* UART for LL DEBUG */
.phys_io = MSM_UART1_PHYS,
.io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = halibut_map_io,
.init_irq = halibut_init_irq,
......
/* arch/arm/mach-msm/clock-7x01a.c
*
* Clock tables for MSM7X01A
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007 QUALCOMM Incorporated
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include "clock.h"
#include "devices.h"
/* clock IDs used by the modem processor */
#define ACPU_CLK 0 /* Applications processor clock */
#define ADM_CLK 1 /* Applications data mover clock */
#define ADSP_CLK 2 /* ADSP clock */
#define EBI1_CLK 3 /* External bus interface 1 clock */
#define EBI2_CLK 4 /* External bus interface 2 clock */
#define ECODEC_CLK 5 /* External CODEC clock */
#define EMDH_CLK 6 /* External MDDI host clock */
#define GP_CLK 7 /* General purpose clock */
#define GRP_CLK 8 /* Graphics clock */
#define I2C_CLK 9 /* I2C clock */
#define ICODEC_RX_CLK 10 /* Internal CODEX RX clock */
#define ICODEC_TX_CLK 11 /* Internal CODEX TX clock */
#define IMEM_CLK 12 /* Internal graphics memory clock */
#define MDC_CLK 13 /* MDDI client clock */
#define MDP_CLK 14 /* Mobile display processor clock */
#define PBUS_CLK 15 /* Peripheral bus clock */
#define PCM_CLK 16 /* PCM clock */
#define PMDH_CLK 17 /* Primary MDDI host clock */
#define SDAC_CLK 18 /* Stereo DAC clock */
#define SDC1_CLK 19 /* Secure Digital Card clocks */
#define SDC1_PCLK 20
#define SDC2_CLK 21
#define SDC2_PCLK 22
#define SDC3_CLK 23
#define SDC3_PCLK 24
#define SDC4_CLK 25
#define SDC4_PCLK 26
#define TSIF_CLK 27 /* Transport Stream Interface clocks */
#define TSIF_REF_CLK 28
#define TV_DAC_CLK 29 /* TV clocks */
#define TV_ENC_CLK 30
#define UART1_CLK 31 /* UART clocks */
#define UART2_CLK 32
#define UART3_CLK 33
#define UART1DM_CLK 34
#define UART2DM_CLK 35
#define USB_HS_CLK 36 /* High speed USB core clock */
#define USB_HS_PCLK 37 /* High speed USB pbus clock */
#define USB_OTG_CLK 38 /* Full speed USB clock */
#define VDC_CLK 39 /* Video controller clock */
#define VFE_CLK 40 /* Camera / Video Front End clock */
#define VFE_MDC_CLK 41 /* VFE MDDI client clock */
#define NR_CLKS 42
#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) { \
.name = clk_name, \
.id = clk_id, \
.flags = clk_flags, \
.dev = clk_dev, \
}
#define OFF CLKFLAG_AUTO_OFF
#define MINMAX CLKFLAG_USE_MIN_MAX_TO_SET
struct clk msm_clocks[] = {
CLOCK("adm_clk", ADM_CLK, NULL, 0),
CLOCK("adsp_clk", ADSP_CLK, NULL, 0),
CLOCK("ebi1_clk", EBI1_CLK, NULL, 0),
CLOCK("ebi2_clk", EBI2_CLK, NULL, 0),
CLOCK("ecodec_clk", ECODEC_CLK, NULL, 0),
CLOCK("emdh_clk", EMDH_CLK, NULL, OFF),
CLOCK("gp_clk", GP_CLK, NULL, 0),
CLOCK("grp_clk", GRP_CLK, NULL, OFF),
CLOCK("i2c_clk", I2C_CLK, &msm_device_i2c.dev, 0),
CLOCK("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0),
CLOCK("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0),
CLOCK("imem_clk", IMEM_CLK, NULL, OFF),
CLOCK("mdc_clk", MDC_CLK, NULL, 0),
CLOCK("mdp_clk", MDP_CLK, NULL, OFF),
CLOCK("pbus_clk", PBUS_CLK, NULL, 0),
CLOCK("pcm_clk", PCM_CLK, NULL, 0),
CLOCK("pmdh_clk", PMDH_CLK, NULL, OFF | MINMAX),
CLOCK("sdac_clk", SDAC_CLK, NULL, OFF),
CLOCK("sdc_clk", SDC1_CLK, &msm_device_sdc1.dev, OFF),
CLOCK("sdc_pclk", SDC1_PCLK, &msm_device_sdc1.dev, OFF),
CLOCK("sdc_clk", SDC2_CLK, &msm_device_sdc2.dev, OFF),
CLOCK("sdc_pclk", SDC2_PCLK, &msm_device_sdc2.dev, OFF),
CLOCK("sdc_clk", SDC3_CLK, &msm_device_sdc3.dev, OFF),
CLOCK("sdc_pclk", SDC3_PCLK, &msm_device_sdc3.dev, OFF),
CLOCK("sdc_clk", SDC4_CLK, &msm_device_sdc4.dev, OFF),
CLOCK("sdc_pclk", SDC4_PCLK, &msm_device_sdc4.dev, OFF),
CLOCK("tsif_clk", TSIF_CLK, NULL, 0),
CLOCK("tsif_ref_clk", TSIF_REF_CLK, NULL, 0),
CLOCK("tv_dac_clk", TV_DAC_CLK, NULL, 0),
CLOCK("tv_enc_clk", TV_ENC_CLK, NULL, 0),
CLOCK("uart_clk", UART1_CLK, &msm_device_uart1.dev, OFF),
CLOCK("uart_clk", UART2_CLK, &msm_device_uart2.dev, 0),
CLOCK("uart_clk", UART3_CLK, &msm_device_uart3.dev, OFF),
CLOCK("uart1dm_clk", UART1DM_CLK, NULL, OFF),
CLOCK("uart2dm_clk", UART2DM_CLK, NULL, 0),
CLOCK("usb_hs_clk", USB_HS_CLK, &msm_device_hsusb.dev, OFF),
CLOCK("usb_hs_pclk", USB_HS_PCLK, &msm_device_hsusb.dev, OFF),
CLOCK("usb_otg_clk", USB_OTG_CLK, NULL, 0),
CLOCK("vdc_clk", VDC_CLK, NULL, OFF | MINMAX),
CLOCK("vfe_clk", VFE_CLK, NULL, OFF),
CLOCK("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF),
};
unsigned msm_num_clocks = ARRAY_SIZE(msm_clocks);
/* arch/arm/mach-msm/clock.c
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007 QUALCOMM Incorporated
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spinlock.h>
#include "clock.h"
#include "proc_comm.h"
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clocks_lock);
static LIST_HEAD(clocks);
/*
* glue for the proc_comm interface
*/
static inline int pc_clk_enable(unsigned id)
{
return msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
}
static inline void pc_clk_disable(unsigned id)
{
msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
}
static inline int pc_clk_set_rate(unsigned id, unsigned rate)
{
return msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
}
static inline int pc_clk_set_min_rate(unsigned id, unsigned rate)
{
return msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
}
static inline int pc_clk_set_max_rate(unsigned id, unsigned rate)
{
return msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
}
static inline int pc_clk_set_flags(unsigned id, unsigned flags)
{
return msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
}
static inline unsigned pc_clk_get_rate(unsigned id)
{
if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
return 0;
else
return id;
}
static inline unsigned pc_clk_is_enabled(unsigned id)
{
if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
return 0;
else
return id;
}
static inline int pc_pll_request(unsigned id, unsigned on)
{
on = !!on;
return msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
}
/*
* Standard clock functions defined in include/linux/clk.h
*/
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *clk;
mutex_lock(&clocks_mutex);
list_for_each_entry(clk, &clocks, list)
if (!strcmp(id, clk->name) && clk->dev == dev)
goto found_it;
list_for_each_entry(clk, &clocks, list)
if (!strcmp(id, clk->name) && clk->dev == NULL)
goto found_it;
clk = ERR_PTR(-ENOENT);
found_it:
mutex_unlock(&clocks_mutex);
return clk;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_put);
int clk_enable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
clk->count++;
if (clk->count == 1)
pc_clk_enable(clk->id);
spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
BUG_ON(clk->count == 0);
clk->count--;
if (clk->count == 0)
pc_clk_disable(clk->id);
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
return pc_clk_get_rate(clk->id);
}
EXPORT_SYMBOL(clk_get_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret;
if (clk->flags & CLKFLAG_USE_MIN_MAX_TO_SET) {
ret = pc_clk_set_max_rate(clk->id, rate);
if (ret)
return ret;
return pc_clk_set_min_rate(clk->id, rate);
}
return pc_clk_set_rate(clk->id, rate);
}
EXPORT_SYMBOL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
return -ENOSYS;
}
EXPORT_SYMBOL(clk_set_parent);
struct clk *clk_get_parent(struct clk *clk)
{
return ERR_PTR(-ENOSYS);
}
EXPORT_SYMBOL(clk_get_parent);
int clk_set_flags(struct clk *clk, unsigned long flags)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
return pc_clk_set_flags(clk->id, flags);
}
EXPORT_SYMBOL(clk_set_flags);
void __init msm_clock_init(void)
{
unsigned n;
spin_lock_init(&clocks_lock);
mutex_lock(&clocks_mutex);
for (n = 0; n < msm_num_clocks; n++)
list_add_tail(&msm_clocks[n].list, &clocks);
mutex_unlock(&clocks_mutex);
}
/* The bootloader and/or AMSS may have left various clocks enabled.
* Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have
* not been explicitly enabled by a clk_enable() call.
*/
static int __init clock_late_init(void)
{
unsigned long flags;
struct clk *clk;
unsigned count = 0;
mutex_lock(&clocks_mutex);
list_for_each_entry(clk, &clocks, list) {
if (clk->flags & CLKFLAG_AUTO_OFF) {
spin_lock_irqsave(&clocks_lock, flags);
if (!clk->count) {
count++;
pc_clk_disable(clk->id);
}
spin_unlock_irqrestore(&clocks_lock, flags);
}
}
mutex_unlock(&clocks_mutex);
pr_info("clock_late_init() disabled %d unused clocks\n", count);
return 0;
}
late_initcall(clock_late_init);
/* arch/arm/mach-msm/clock.h
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007 QUALCOMM Incorporated
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H
#define __ARCH_ARM_MACH_MSM_CLOCK_H
#include <linux/list.h>
#define CLKFLAG_INVERT 0x00000001
#define CLKFLAG_NOINVERT 0x00000002
#define CLKFLAG_NONEST 0x00000004
#define CLKFLAG_NORESET 0x00000008
#define CLK_FIRST_AVAILABLE_FLAG 0x00000100
#define CLKFLAG_USE_MIN_MAX_TO_SET 0x00000200
#define CLKFLAG_AUTO_OFF 0x00000400
struct clk {
uint32_t id;
uint32_t count;
uint32_t flags;
const char *name;
struct list_head list;
struct device *dev;
};
#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
extern struct clk msm_clocks[];
extern unsigned msm_num_clocks;
#endif
/* linux/arch/arm/mach-msm/common.c
*
* Common setup code for MSM7K Boards
*
* Copyright (C) 2007 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/flash.h>
#include <asm/setup.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <mach/msm_iomap.h>
#include <mach/board.h>
struct flash_platform_data msm_nand_data = {
.parts = 0,
.nr_parts = 0,
};
static struct resource msm_nand_resources[] = {
[0] = {
.start = 7,
.end = 7,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device msm_nand_device = {
.name = "msm_nand",
.id = -1,
.num_resources = ARRAY_SIZE(msm_nand_resources),
.resource = msm_nand_resources,
.dev = {
.platform_data = &msm_nand_data,
},
};
static struct platform_device msm_smd_device = {
.name = "msm_smd",
.id = -1,
};
static struct resource msm_i2c_resources[] = {
{
.start = MSM_I2C_BASE,
.end = MSM_I2C_BASE + MSM_I2C_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_PWB_I2C,
.end = INT_PWB_I2C,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device msm_i2c_device = {
.name = "msm_i2c",
.id = 0,
.num_resources = ARRAY_SIZE(msm_i2c_resources),
.resource = msm_i2c_resources,
};
static struct resource usb_resources[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device msm_hsusb_device = {
.name = "msm_hsusb",
.id = -1,
.num_resources = ARRAY_SIZE(usb_resources),
.resource = usb_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
static struct platform_device *devices[] __initdata = {
&msm_nand_device,
&msm_smd_device,
&msm_i2c_device,
&msm_hsusb_device,
};
void __init msm_add_devices(void)
{
platform_add_devices(devices, ARRAY_SIZE(devices));
}
/* linux/arch/arm/mach-msm/devices.c
*
* Copyright (C) 2008 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/msm_iomap.h>
#include "devices.h"
#include <asm/mach/flash.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
static struct resource resources_uart1[] = {
{
.start = INT_UART1,
.end = INT_UART1,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART1_PHYS,
.end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct resource resources_uart2[] = {
{
.start = INT_UART2,
.end = INT_UART2,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART2_PHYS,
.end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct resource resources_uart3[] = {
{
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
{
.start = MSM_UART3_PHYS,
.end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device msm_device_uart1 = {
.name = "msm_serial",
.id = 0,
.num_resources = ARRAY_SIZE(resources_uart1),
.resource = resources_uart1,
};
struct platform_device msm_device_uart2 = {
.name = "msm_serial",
.id = 1,
.num_resources = ARRAY_SIZE(resources_uart2),
.resource = resources_uart2,
};
struct platform_device msm_device_uart3 = {
.name = "msm_serial",
.id = 2,
.num_resources = ARRAY_SIZE(resources_uart3),
.resource = resources_uart3,
};
static struct resource resources_i2c[] = {
{
.start = MSM_I2C_PHYS,
.end = MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_PWB_I2C,
.end = INT_PWB_I2C,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_i2c = {
.name = "msm_i2c",
.id = 0,
.num_resources = ARRAY_SIZE(resources_i2c),
.resource = resources_i2c,
};
static struct resource resources_hsusb[] = {
{
.start = MSM_HSUSB_PHYS,
.end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
.flags = IORESOURCE_MEM,
},
{
.start = INT_USB_HS,
.end = INT_USB_HS,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device msm_device_hsusb = {
.name = "msm_hsusb",
.id = -1,
.num_resources = ARRAY_SIZE(resources_hsusb),
.resource = resources_hsusb,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct flash_platform_data msm_nand_data = {
.parts = NULL,
.nr_parts = 0,
};
static struct resource resources_nand[] = {
[0] = {
.start = 7,
.end = 7,
.flags = IORESOURCE_DMA,
},
};
struct platform_device msm_device_nand = {
.name = "msm_nand",
.id = -1,
.num_resources = ARRAY_SIZE(resources_nand),
.resource = resources_nand,
.dev = {
.platform_data = &msm_nand_data,
},
};
struct platform_device msm_device_smd = {
.name = "msm_smd",
.id = -1,
};
static struct resource resources_sdc1[] = {
{
.start = MSM_SDC1_PHYS,
.end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC1_0,
.end = INT_SDC1_1,
.flags = IORESOURCE_IRQ,
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc2[] = {
{
.start = MSM_SDC2_PHYS,
.end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC2_0,
.end = INT_SDC2_1,
.flags = IORESOURCE_IRQ,
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc3[] = {
{
.start = MSM_SDC3_PHYS,
.end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC3_0,
.end = INT_SDC3_1,
.flags = IORESOURCE_IRQ,
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
static struct resource resources_sdc4[] = {
{
.start = MSM_SDC4_PHYS,
.end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_SDC4_0,
.end = INT_SDC4_1,
.flags = IORESOURCE_IRQ,
},
{
.start = 8,
.end = 8,
.flags = IORESOURCE_DMA,
},
};
struct platform_device msm_device_sdc1 = {
.name = "msm_sdcc",
.id = 1,
.num_resources = ARRAY_SIZE(resources_sdc1),
.resource = resources_sdc1,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc2 = {
.name = "msm_sdcc",
.id = 2,
.num_resources = ARRAY_SIZE(resources_sdc2),
.resource = resources_sdc2,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc3 = {
.name = "msm_sdcc",
.id = 3,
.num_resources = ARRAY_SIZE(resources_sdc3),
.resource = resources_sdc3,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
struct platform_device msm_device_sdc4 = {
.name = "msm_sdcc",
.id = 4,
.num_resources = ARRAY_SIZE(resources_sdc4),
.resource = resources_sdc4,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
/* linux/arch/arm/mach-msm/devices.h
*
* Copyright (C) 2008 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
#define __ARCH_ARM_MACH_MSM_DEVICES_H
extern struct platform_device msm_device_uart1;
extern struct platform_device msm_device_uart2;
extern struct platform_device msm_device_uart3;
extern struct platform_device msm_device_sdc1;
extern struct platform_device msm_device_sdc2;
extern struct platform_device msm_device_sdc3;
extern struct platform_device msm_device_sdc4;
extern struct platform_device msm_device_hsusb;
extern struct platform_device msm_device_i2c;
extern struct platform_device msm_device_smd;
extern struct platform_device msm_device_nand;
#endif
......@@ -26,7 +26,7 @@ enum {
};
static DEFINE_SPINLOCK(msm_dmov_lock);
static struct msm_dmov_cmd active_command;
static unsigned int channel_active;
static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
......@@ -43,6 +43,11 @@ unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
#define PRINT_FLOW(format, args...) \
MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful)
{
writel((graceful << 31), DMOV_FLUSH0(id));
}
void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
{
unsigned long irq_flags;
......@@ -60,6 +65,9 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
#endif
PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
list_add_tail(&cmd->list, &active_commands[id]);
if (!channel_active)
enable_irq(INT_ADM_AARM);
channel_active |= 1U << id;
writel(cmd->cmdptr, DMOV_CMD_PTR(id));
} else {
if (list_empty(&active_commands[id]))
......@@ -76,21 +84,19 @@ struct msm_dmov_exec_cmdptr_cmd {
struct completion complete;
unsigned id;
unsigned int result;
unsigned int flush[6];
struct msm_dmov_errdata err;
};
static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result)
static void
dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd,
unsigned int result,
struct msm_dmov_errdata *err)
{
struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
cmd->result = result;
if (result != 0x80000002) {
cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id));
cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id));
cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id));
cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id));
cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id));
cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id));
}
if (result != 0x80000002 && err)
memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata));
complete(&cmd->complete);
}
......@@ -111,7 +117,7 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
if (cmd.result != 0x80000002) {
PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n",
id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]);
id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]);
return -EIO;
}
PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
......@@ -159,25 +165,40 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
"for %p, result %x\n", id, cmd, ch_result);
if (cmd) {
list_del(&cmd->list);
cmd->complete_func(cmd, ch_result);
cmd->complete_func(cmd, ch_result, NULL);
}
}
if (ch_result & DMOV_RSLT_FLUSH) {
unsigned int flush0 = readl(DMOV_FLUSH0(id));
struct msm_dmov_errdata errdata;
errdata.flush[0] = readl(DMOV_FLUSH0(id));
errdata.flush[1] = readl(DMOV_FLUSH1(id));
errdata.flush[2] = readl(DMOV_FLUSH2(id));
errdata.flush[3] = readl(DMOV_FLUSH3(id));
errdata.flush[4] = readl(DMOV_FLUSH4(id));
errdata.flush[5] = readl(DMOV_FLUSH5(id));
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0);
PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
if (cmd) {
list_del(&cmd->list);
cmd->complete_func(cmd, ch_result);
cmd->complete_func(cmd, ch_result, &errdata);
}
}
if (ch_result & DMOV_RSLT_ERROR) {
unsigned int flush0 = readl(DMOV_FLUSH0(id));
struct msm_dmov_errdata errdata;
errdata.flush[0] = readl(DMOV_FLUSH0(id));
errdata.flush[1] = readl(DMOV_FLUSH1(id));
errdata.flush[2] = readl(DMOV_FLUSH2(id));
errdata.flush[3] = readl(DMOV_FLUSH3(id));
errdata.flush[4] = readl(DMOV_FLUSH4(id));
errdata.flush[5] = readl(DMOV_FLUSH5(id));
PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0);
PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
if (cmd) {
list_del(&cmd->list);
cmd->complete_func(cmd, ch_result);
cmd->complete_func(cmd, ch_result, &errdata);
}
/* this does not seem to work, once we get an error */
/* the datamover will no longer accept commands */
......@@ -193,8 +214,14 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
writel(cmd->cmdptr, DMOV_CMD_PTR(id));
}
} while (ch_status & DMOV_STATUS_RSLT_VALID);
if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id]))
channel_active &= ~(1U << id);
PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
}
if (!channel_active)
disable_irq(INT_ADM_AARM);
spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
return IRQ_HANDLED;
}
......@@ -202,12 +229,17 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
static int __init msm_init_datamover(void)
{
int i;
int ret;
for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
INIT_LIST_HEAD(&ready_commands[i]);
INIT_LIST_HEAD(&active_commands[i]);
writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
}
return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
if (ret)
return ret;
disable_irq(INT_ADM_AARM);
return 0;
}
arch_initcall(msm_init_datamover);
......
......@@ -33,5 +33,6 @@ void __init msm_add_devices(void);
void __init msm_map_common_io(void);
void __init msm_init_irq(void);
void __init msm_init_gpio(void);
void __init msm_clock_init(void);
#endif
......@@ -22,18 +22,22 @@
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, =MSM_UART1_PHYS
ldrne \rx, =MSM_UART1_BASE
movne \rx, #0
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0x0C]
teq \rx, #0
strne \rd, [\rx, #0x0C]
.endm
.macro waituart,rd,rx
@ wait for TX_READY
teq \rx, #0
bne 2f
1: ldr \rd, [\rx, #0x08]
tst \rd, #0x04
beq 1b
2:
.endm
.macro busyuart,rd,rx
......
/* arch/arm/mach-msm/include/mach/dma.h
/* linux/include/asm-arm/arch-msm/dma.h
*
* Copyright (C) 2007 Google, Inc.
*
......@@ -18,17 +18,21 @@
#include <linux/list.h>
#include <mach/msm_iomap.h>
struct msm_dmov_errdata {
uint32_t flush[6];
};
struct msm_dmov_cmd {
struct list_head list;
unsigned int cmdptr;
void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */
void (*complete_func)(struct msm_dmov_cmd *cmd,
unsigned int result,
struct msm_dmov_errdata *err);
};
void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful);
int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
......@@ -122,6 +126,16 @@ typedef struct {
unsigned _reserved;
} dmov_sg;
/* Box mode */
typedef struct {
uint32_t cmd;
uint32_t src_row_addr;
uint32_t dst_row_addr;
uint32_t src_dst_len;
uint32_t num_rows;
uint32_t row_offset;
} dmov_box;
/* bits for the cmd field of the above structures */
#define CMD_LC (1 << 31) /* last command */
......
......@@ -37,11 +37,17 @@
*
*/
#define MSM_VIC_BASE 0xE0000000
#ifdef __ASSEMBLY__
#define IOMEM(x) x
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define MSM_VIC_BASE IOMEM(0xE0000000)
#define MSM_VIC_PHYS 0xC0000000
#define MSM_VIC_SIZE SZ_4K
#define MSM_CSR_BASE 0xE0001000
#define MSM_CSR_BASE IOMEM(0xE0001000)
#define MSM_CSR_PHYS 0xC0100000
#define MSM_CSR_SIZE SZ_4K
......@@ -49,56 +55,67 @@
#define MSM_GPT_BASE MSM_CSR_BASE
#define MSM_GPT_SIZE SZ_4K
#define MSM_DMOV_BASE 0xE0002000
#define MSM_DMOV_BASE IOMEM(0xE0002000)
#define MSM_DMOV_PHYS 0xA9700000
#define MSM_DMOV_SIZE SZ_4K
#define MSM_UART1_BASE 0xE0003000
#define MSM_GPIO1_BASE IOMEM(0xE0003000)
#define MSM_GPIO1_PHYS 0xA9200000
#define MSM_GPIO1_SIZE SZ_4K
#define MSM_GPIO2_BASE IOMEM(0xE0004000)
#define MSM_GPIO2_PHYS 0xA9300000
#define MSM_GPIO2_SIZE SZ_4K
#define MSM_CLK_CTL_BASE IOMEM(0xE0005000)
#define MSM_CLK_CTL_PHYS 0xA8600000
#define MSM_CLK_CTL_SIZE SZ_4K
#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000)
#define MSM_SHARED_RAM_PHYS 0x01F00000
#define MSM_SHARED_RAM_SIZE SZ_1M
#define MSM_UART1_PHYS 0xA9A00000
#define MSM_UART1_SIZE SZ_4K
#define MSM_UART2_BASE 0xE0004000
#define MSM_UART2_PHYS 0xA9B00000
#define MSM_UART2_SIZE SZ_4K
#define MSM_UART3_BASE 0xE0005000
#define MSM_UART3_PHYS 0xA9C00000
#define MSM_UART3_SIZE SZ_4K
#define MSM_I2C_BASE 0xE0006000
#define MSM_I2C_PHYS 0xA9900000
#define MSM_I2C_SIZE SZ_4K
#define MSM_SDC1_PHYS 0xA0400000
#define MSM_SDC1_SIZE SZ_4K
#define MSM_GPIO1_BASE 0xE0007000
#define MSM_GPIO1_PHYS 0xA9200000
#define MSM_GPIO1_SIZE SZ_4K
#define MSM_SDC2_PHYS 0xA0500000
#define MSM_SDC2_SIZE SZ_4K
#define MSM_GPIO2_BASE 0xE0008000
#define MSM_GPIO2_PHYS 0xA9300000
#define MSM_GPIO2_SIZE SZ_4K
#define MSM_SDC3_PHYS 0xA0600000
#define MSM_SDC3_SIZE SZ_4K
#define MSM_SDC4_PHYS 0xA0700000
#define MSM_SDC4_SIZE SZ_4K
#define MSM_I2C_PHYS 0xA9900000
#define MSM_I2C_SIZE SZ_4K
#define MSM_HSUSB_BASE 0xE0009000
#define MSM_HSUSB_PHYS 0xA0800000
#define MSM_HSUSB_SIZE SZ_4K
#define MSM_CLK_CTL_BASE 0xE000A000
#define MSM_CLK_CTL_PHYS 0xA8600000
#define MSM_CLK_CTL_SIZE SZ_4K
#define MSM_PMDH_BASE 0xE000B000
#define MSM_PMDH_PHYS 0xAA600000
#define MSM_PMDH_SIZE SZ_4K
#define MSM_EMDH_BASE 0xE000C000
#define MSM_EMDH_PHYS 0xAA700000
#define MSM_EMDH_SIZE SZ_4K
#define MSM_MDP_BASE 0xE0010000
#define MSM_MDP_PHYS 0xAA200000
#define MSM_MDP_SIZE 0x000F0000
#define MSM_SHARED_RAM_BASE 0xE0100000
#define MSM_SHARED_RAM_PHYS 0x01F00000
#define MSM_SHARED_RAM_SIZE SZ_1M
#define MSM_MDC_PHYS 0xAA500000
#define MSM_MDC_SIZE SZ_1M
#define MSM_AD5_PHYS 0xAC000000
#define MSM_AD5_SIZE (SZ_1M*13)
#endif
/* linux/include/asm-arm/arch-msm/vreg.h
*
* Copyright (C) 2008 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __ARCH_ARM_MACH_MSM_VREG_H
#define __ARCH_ARM_MACH_MSM_VREG_H
struct vreg;
struct vreg *vreg_get(struct device *dev, const char *id);
void vreg_put(struct vreg *vreg);
int vreg_enable(struct vreg *vreg);
void vreg_disable(struct vreg *vreg);
int vreg_set_level(struct vreg *vreg, unsigned mv);
#endif
......@@ -28,7 +28,7 @@
#include <mach/board.h>
#define MSM_DEVICE(name) { \
.virtual = MSM_##name##_BASE, \
.virtual = (unsigned long) MSM_##name##_BASE, \
.pfn = __phys_to_pfn(MSM_##name##_PHYS), \
.length = MSM_##name##_SIZE, \
.type = MT_DEVICE_NONSHARED, \
......@@ -39,19 +39,11 @@ static struct map_desc msm_io_desc[] __initdata = {
MSM_DEVICE(CSR),
MSM_DEVICE(GPT),
MSM_DEVICE(DMOV),
MSM_DEVICE(UART1),
MSM_DEVICE(UART2),
MSM_DEVICE(UART3),
MSM_DEVICE(I2C),
MSM_DEVICE(GPIO1),
MSM_DEVICE(GPIO2),
MSM_DEVICE(HSUSB),
MSM_DEVICE(CLK_CTL),
MSM_DEVICE(PMDH),
MSM_DEVICE(EMDH),
MSM_DEVICE(MDP),
{
.virtual = MSM_SHARED_RAM_BASE,
.virtual = (unsigned long) MSM_SHARED_RAM_BASE,
.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
.length = MSM_SHARED_RAM_SIZE,
.type = MT_DEVICE,
......
......@@ -66,20 +66,20 @@
static void msm_irq_ack(unsigned int irq)
{
unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
void __iomem *reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
irq = 1 << (irq & 31);
writel(irq, reg);
}
static void msm_irq_mask(unsigned int irq)
{
unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
void __iomem *reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
writel(1 << (irq & 31), reg);
}
static void msm_irq_unmask(unsigned int irq)
{
unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
void __iomem *reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
writel(1 << (irq & 31), reg);
}
......@@ -90,8 +90,8 @@ static int msm_irq_set_wake(unsigned int irq, unsigned int on)
static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
{
unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
void __iomem *treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
void __iomem *preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
int b = 1 << (irq & 31);
if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
......
/* arch/arm/mach-msm/proc_comm.c
*
* Copyright (C) 2007-2008 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/msm_iomap.h>
#include <mach/system.h>
#include "proc_comm.h"
#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4)
static inline void notify_other_proc_comm(void)
{
writel(1, MSM_A2M_INT(6));
}
#define APP_COMMAND 0x00
#define APP_STATUS 0x04
#define APP_DATA1 0x08
#define APP_DATA2 0x0C
#define MDM_COMMAND 0x10
#define MDM_STATUS 0x14
#define MDM_DATA1 0x18
#define MDM_DATA2 0x1C
static DEFINE_SPINLOCK(proc_comm_lock);
/* The higher level SMD support will install this to
* provide a way to check for and handle modem restart.
*/
int (*msm_check_for_modem_crash)(void);
/* Poll for a state change, checking for possible
* modem crashes along the way (so we don't wait
* forever while the ARM9 is blowing up).
*
* Return an error in the event of a modem crash and
* restart so the msm_proc_comm() routine can restart
* the operation from the beginning.
*/
static int proc_comm_wait_for(void __iomem *addr, unsigned value)
{
for (;;) {
if (readl(addr) == value)
return 0;
if (msm_check_for_modem_crash)
if (msm_check_for_modem_crash())
return -EAGAIN;
}
}
int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
{
void __iomem *base = MSM_SHARED_RAM_BASE;
unsigned long flags;
int ret;
spin_lock_irqsave(&proc_comm_lock, flags);
for (;;) {
if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY))
continue;
writel(cmd, base + APP_COMMAND);
writel(data1 ? *data1 : 0, base + APP_DATA1);
writel(data2 ? *data2 : 0, base + APP_DATA2);
notify_other_proc_comm();
if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE))
continue;
if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) {
if (data1)
*data1 = readl(base + APP_DATA1);
if (data2)
*data2 = readl(base + APP_DATA2);
ret = 0;
} else {
ret = -EIO;
}
break;
}
writel(PCOM_CMD_IDLE, base + APP_COMMAND);
spin_unlock_irqrestore(&proc_comm_lock, flags);
return ret;
}
/* arch/arm/mach-msm/proc_comm.h
*
* Copyright (c) 2007 QUALCOMM Incorporated
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
enum {
PCOM_CMD_IDLE = 0x0,
PCOM_CMD_DONE,
PCOM_RESET_APPS,
PCOM_RESET_CHIP,
PCOM_CONFIG_NAND_MPU,
PCOM_CONFIG_USB_CLKS,
PCOM_GET_POWER_ON_STATUS,
PCOM_GET_WAKE_UP_STATUS,
PCOM_GET_BATT_LEVEL,
PCOM_CHG_IS_CHARGING,
PCOM_POWER_DOWN,
PCOM_USB_PIN_CONFIG,
PCOM_USB_PIN_SEL,
PCOM_SET_RTC_ALARM,
PCOM_NV_READ,
PCOM_NV_WRITE,
PCOM_GET_UUID_HIGH,
PCOM_GET_UUID_LOW,
PCOM_GET_HW_ENTROPY,
PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
PCOM_CLKCTL_RPC_ENABLE,
PCOM_CLKCTL_RPC_DISABLE,
PCOM_CLKCTL_RPC_RESET,
PCOM_CLKCTL_RPC_SET_FLAGS,
PCOM_CLKCTL_RPC_SET_RATE,
PCOM_CLKCTL_RPC_MIN_RATE,
PCOM_CLKCTL_RPC_MAX_RATE,
PCOM_CLKCTL_RPC_RATE,
PCOM_CLKCTL_RPC_PLL_REQUEST,
PCOM_CLKCTL_RPC_ENABLED,
PCOM_VREG_SWITCH,
PCOM_VREG_SET_LEVEL,
PCOM_GPIO_TLMM_CONFIG_GROUP,
PCOM_GPIO_TLMM_UNCONFIG_GROUP,
PCOM_NV_WRITE_BYTES_4_7,
PCOM_CONFIG_DISP,
PCOM_GET_FTM_BOOT_COUNT,
PCOM_RPC_GPIO_TLMM_CONFIG_EX,
PCOM_PM_MPP_CONFIG,
PCOM_GPIO_IN,
PCOM_GPIO_OUT,
PCOM_RESET_MODEM,
PCOM_RESET_CHIP_IMM,
PCOM_PM_VID_EN,
PCOM_VREG_PULLDOWN,
PCOM_NUM_CMDS,
};
enum {
PCOM_INVALID_STATUS = 0x0,
PCOM_READY,
PCOM_CMD_RUNNING,
PCOM_CMD_SUCCESS,
PCOM_CMD_FAIL,
};
/* List of VREGs that support the Pull Down Resistor setting. */
enum {
PM_VREG_PDOWN_MSMA_ID,
PM_VREG_PDOWN_MSMP_ID,
PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */
PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */
PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */
PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_TCXO_ID,
PM_VREG_PDOWN_PA_ID,
PM_VREG_PDOWN_RFTX_ID,
PM_VREG_PDOWN_RFRX1_ID,
PM_VREG_PDOWN_RFRX2_ID,
PM_VREG_PDOWN_SYNT_ID,
PM_VREG_PDOWN_WLAN_ID,
PM_VREG_PDOWN_USB_ID,
PM_VREG_PDOWN_MMC_ID,
PM_VREG_PDOWN_RUIM_ID,
PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */
PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */
PM_VREG_PDOWN_RF_ID,
PM_VREG_PDOWN_RF_VCO_ID,
PM_VREG_PDOWN_MPLL_ID,
PM_VREG_PDOWN_S2_ID,
PM_VREG_PDOWN_S3_ID,
PM_VREG_PDOWN_RFUBM_ID,
/* new for HAN */
PM_VREG_PDOWN_RF1_ID,
PM_VREG_PDOWN_RF2_ID,
PM_VREG_PDOWN_RFA_ID,
PM_VREG_PDOWN_CDC2_ID,
PM_VREG_PDOWN_RFTX2_ID,
PM_VREG_PDOWN_USIM_ID,
PM_VREG_PDOWN_USB2P6_ID,
PM_VREG_PDOWN_USB3P3_ID,
PM_VREG_PDOWN_INVALID_ID,
/* backward compatible enums only */
PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
};
/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
#define GPIO_ENABLE 0
#define GPIO_DISABLE 1
#define GPIO_INPUT 0
#define GPIO_OUTPUT 1
#define GPIO_NO_PULL 0
#define GPIO_PULL_DOWN 1
#define GPIO_KEEPER 2
#define GPIO_PULL_UP 3
#define GPIO_2MA 0
#define GPIO_4MA 1
#define GPIO_6MA 2
#define GPIO_8MA 3
#define GPIO_10MA 4
#define GPIO_12MA 5
#define GPIO_14MA 6
#define GPIO_16MA 7
#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
((((gpio) & 0x3FF) << 4) | \
((func) & 0xf) | \
(((dir) & 0x1) << 14) | \
(((pull) & 0x3) << 15) | \
(((drvstr) & 0xF) << 17))
int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
#endif
......@@ -45,7 +45,7 @@ struct msm_clock {
struct clock_event_device clockevent;
struct clocksource clocksource;
struct irqaction irq;
uint32_t regbase;
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
};
......
/* arch/arm/mach-msm/vreg.c
*
* Copyright (C) 2008 Google, Inc.
* Author: Brian Swetland <swetland@google.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <mach/vreg.h>
#include "proc_comm.h"
struct vreg {
const char *name;
unsigned id;
};
#define VREG(_name, _id) { .name = _name, .id = _id, }
static struct vreg vregs[] = {
VREG("msma", 0),
VREG("msmp", 1),
VREG("msme1", 2),
VREG("msmc1", 3),
VREG("msmc2", 4),
VREG("gp3", 5),
VREG("msme2", 6),
VREG("gp4", 7),
VREG("gp1", 8),
VREG("tcxo", 9),
VREG("pa", 10),
VREG("rftx", 11),
VREG("rfrx1", 12),
VREG("rfrx2", 13),
VREG("synt", 14),
VREG("wlan", 15),
VREG("usb", 16),
VREG("boost", 17),
VREG("mmc", 18),
VREG("ruim", 19),
VREG("msmc0", 20),
VREG("gp2", 21),
VREG("gp5", 22),
VREG("gp6", 23),
VREG("rf", 24),
VREG("rf_vco", 26),
VREG("mpll", 27),
VREG("s2", 28),
VREG("s3", 29),
VREG("rfubm", 30),
VREG("ncp", 31),
};
struct vreg *vreg_get(struct device *dev, const char *id)
{
int n;
for (n = 0; n < ARRAY_SIZE(vregs); n++) {
if (!strcmp(vregs[n].name, id))
return vregs + n;
}
return 0;
}
void vreg_put(struct vreg *vreg)
{
}
int vreg_enable(struct vreg *vreg)
{
unsigned id = vreg->id;
unsigned enable = 1;
return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
}
void vreg_disable(struct vreg *vreg)
{
unsigned id = vreg->id;
unsigned enable = 0;
msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
}
int vreg_set_level(struct vreg *vreg, unsigned mv)
{
unsigned id = vreg->id;
return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
}
#if defined(CONFIG_DEBUG_FS)
static int vreg_debug_set(void *data, u64 val)
{
struct vreg *vreg = data;
switch (val) {
case 0:
vreg_disable(vreg);
break;
case 1:
vreg_enable(vreg);
break;
default:
vreg_set_level(vreg, val);
break;
}
return 0;
}
static int vreg_debug_get(void *data, u64 *val)
{
return -ENOSYS;
}
DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
static int __init vreg_debug_init(void)
{
struct dentry *dent;
int n;
dent = debugfs_create_dir("vreg", 0);
if (IS_ERR(dent))
return 0;
for (n = 0; n < ARRAY_SIZE(vregs); n++)
(void) debugfs_create_file(vregs[n].name, 0644,
dent, vregs + n, &vreg_fops);
return 0;
}
device_initcall(vreg_debug_init);
#endif
......@@ -71,6 +71,14 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config CORGI_SSP_DEPRECATED
bool
select PXA_SSP
help
This option will include corgi_ssp.c and corgi_lcd.c
that corgi_ts.c and other legacy drivers (corgi_bl.c
and sharpsl_pm.c) may depend on.
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
......
......@@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_PCM027) += pcm027.o
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
......
/*
* linux/arch/arm/mach-pxa/corgi_lcd.c
*
* Corgi/Spitz LCD Specific Code
*
* Copyright (C) 2005 Richard Purdie
*
* Connectivity:
* Corgi - LCD to ATI Imageon w100 (Wallaby)
* Spitz - LCD to PXA Framebuffer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/string.h>
#include <mach/corgi.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/sharpsl.h>
#include <mach/spitz.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
/* Register Addresses */
#define RESCTL_ADRS 0x00
#define PHACTRL_ADRS 0x01
#define DUTYCTRL_ADRS 0x02
#define POWERREG0_ADRS 0x03
#define POWERREG1_ADRS 0x04
#define GPOR3_ADRS 0x05
#define PICTRL_ADRS 0x06
#define POLCTRL_ADRS 0x07
/* Register Bit Definitions */
#define RESCTL_QVGA 0x01
#define RESCTL_VGA 0x00
#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
#define PICTRL_INIT_STATE 0x01
#define PICTRL_INIOFF 0x02
#define PICTRL_POWER_DOWN 0x04
#define PICTRL_COM_SIGNAL_OFF 0x08
#define PICTRL_DAC_SIGNAL_OFF 0x10
#define POLCTRL_SYNC_POL_FALL 0x01
#define POLCTRL_EN_POL_FALL 0x02
#define POLCTRL_DATA_POL_FALL 0x04
#define POLCTRL_SYNC_ACT_H 0x08
#define POLCTRL_EN_ACT_L 0x10
#define POLCTRL_SYNC_POL_RISE 0x00
#define POLCTRL_EN_POL_RISE 0x00
#define POLCTRL_DATA_POL_RISE 0x00
#define POLCTRL_SYNC_ACT_L 0x00
#define POLCTRL_EN_ACT_H 0x00
#define PHACTRL_PHASE_MANUAL 0x01
#define DEFAULT_PHAD_QVGA (9)
#define DEFAULT_COMADJ (125)
/*
* This is only a psuedo I2C interface. We can't use the standard kernel
* routines as the interface is write only. We just assume the data is acked...
*/
static void lcdtg_ssp_i2c_send(u8 data)
{
corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
udelay(10);
}
static void lcdtg_i2c_send_bit(u8 data)
{
lcdtg_ssp_i2c_send(data);
lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(data);
}
static void lcdtg_i2c_send_start(u8 base)
{
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(base);
}
static void lcdtg_i2c_send_stop(u8 base)
{
lcdtg_ssp_i2c_send(base);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
}
static void lcdtg_i2c_send_byte(u8 base, u8 data)
{
int i;
for (i = 0; i < 8; i++) {
if (data & 0x80)
lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
else
lcdtg_i2c_send_bit(base);
data <<= 1;
}
}
static void lcdtg_i2c_wait_ack(u8 base)
{
lcdtg_i2c_send_bit(base);
}
static void lcdtg_set_common_voltage(u8 base_data, u8 data)
{
/* Set Common Voltage to M62332FP via I2C */
lcdtg_i2c_send_start(base_data);
lcdtg_i2c_send_byte(base_data, 0x9c);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_byte(base_data, 0x00);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_byte(base_data, data);
lcdtg_i2c_wait_ack(base_data);
lcdtg_i2c_send_stop(base_data);
}
/* Set Phase Adjust */
static void lcdtg_set_phadadj(int mode)
{
int adj;
switch(mode) {
case 480:
case 640:
/* Setting for VGA */
adj = sharpsl_param.phadadj;
if (adj < 0) {
adj = PHACTRL_PHASE_MANUAL;
} else {
adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
}
break;
case 240:
case 320:
default:
/* Setting for QVGA */
adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
break;
}
corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
}
static int lcd_inited;
void corgi_lcdtg_hw_init(int mode)
{
if (!lcd_inited) {
int comadj;
/* Initialize Internal Logic & Port */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
| POWER0_COM_OFF | POWER0_VCC5_OFF);
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
/* VDD(+8V), SVSS(-4V) ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
mdelay(3);
/* DAC ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
| POWER0_COM_OFF | POWER0_VCC5_OFF);
/* INIB = H, INI = L */
/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
/* Set Common Voltage */
comadj = sharpsl_param.comadj;
if (comadj < 0)
comadj = DEFAULT_COMADJ;
lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
/* VCC5 ON, DAC ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
POWER0_COM_OFF | POWER0_VCC5_ON);
/* GVSS(-8V) ON, VDD ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
mdelay(2);
/* COM SIGNAL ON (PICTL[3] = L) */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
/* COM ON, DAC ON, VCC5_ON */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
| POWER0_COM_ON | POWER0_VCC5_ON);
/* VW ON, GVSS ON, VDD ON */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
/* Signals output enable */
corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
/* Set Phase Adjust */
lcdtg_set_phadadj(mode);
/* Initialize for Input Signals from ATI */
corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
udelay(1000);
lcd_inited=1;
} else {
lcdtg_set_phadadj(mode);
}
switch(mode) {
case 480:
case 640:
/* Set Lcd Resolution (VGA) */
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
break;
case 240:
case 320:
default:
/* Set Lcd Resolution (QVGA) */
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
break;
}
}
void corgi_lcdtg_suspend(void)
{
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
mdelay(34);
/* (1)VW OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
/* (2)COM OFF */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
/* (3)Set Common Voltage Bias 0V */
lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
/* (4)GVSS OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
/* (5)VCC5 OFF */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
/* (6)Set PDWN, INIOFF, DACOFF */
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
/* (7)DAC OFF */
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
/* (8)VDD OFF */
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
lcd_inited = 0;
}
/*
* SSP control code for Sharp Corgi devices
*
* Copyright (c) 2004-2005 Richard Purdie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/ssp.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-gpio.h>
#include <mach/regs-ssp.h>
#include "sharpsl.h"
static DEFINE_SPINLOCK(corgi_ssp_lock);
static struct ssp_dev corgi_ssp_dev;
static struct ssp_state corgi_ssp_state;
static struct corgissp_machinfo *ssp_machinfo;
/*
* There are three devices connected to the SSP interface:
* 1. A touchscreen controller (TI ADS7846 compatible)
* 2. An LCD controller (with some Backlight functionality)
* 3. A battery monitoring IC (Maxim MAX1111)
*
* Each device uses a different speed/mode of communication.
*
* The touchscreen is very sensitive and the most frequently used
* so the port is left configured for this.
*
* Devices are selected using Chip Selects on GPIOs.
*/
/*
* ADS7846 Routines
*/
unsigned long corgi_ssp_ads7846_putget(ulong data)
{
unsigned long flag;
u32 ret = 0;
spin_lock_irqsave(&corgi_ssp_lock, flag);
if (ssp_machinfo->cs_ads7846 >= 0)
GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
ssp_write_word(&corgi_ssp_dev,data);
ssp_read_word(&corgi_ssp_dev, &ret);
if (ssp_machinfo->cs_ads7846 >= 0)
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
return ret;
}
/*
* NOTE: These functions should always be called in interrupt context
* and use the _lock and _unlock functions. They are very time sensitive.
*/
void corgi_ssp_ads7846_lock(void)
{
spin_lock(&corgi_ssp_lock);
if (ssp_machinfo->cs_ads7846 >= 0)
GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
}
void corgi_ssp_ads7846_unlock(void)
{
if (ssp_machinfo->cs_ads7846 >= 0)
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
spin_unlock(&corgi_ssp_lock);
}
void corgi_ssp_ads7846_put(ulong data)
{
ssp_write_word(&corgi_ssp_dev,data);
}
unsigned long corgi_ssp_ads7846_get(void)
{
u32 ret = 0;
ssp_read_word(&corgi_ssp_dev, &ret);
return ret;
}
EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
EXPORT_SYMBOL(corgi_ssp_ads7846_put);
EXPORT_SYMBOL(corgi_ssp_ads7846_get);
/*
* LCD/Backlight Routines
*/
unsigned long corgi_ssp_dac_put(ulong data)
{
unsigned long flag, sscr1 = SSCR1_SPH;
u32 tmp;
spin_lock_irqsave(&corgi_ssp_lock, flag);
if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
sscr1 = 0;
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
ssp_enable(&corgi_ssp_dev);
if (ssp_machinfo->cs_lcdcon >= 0)
GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
ssp_write_word(&corgi_ssp_dev,data);
/* Read null data back from device to prevent SSP overflow */
ssp_read_word(&corgi_ssp_dev, &tmp);
if (ssp_machinfo->cs_lcdcon >= 0)
GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
return 0;
}
void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
{
corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
}
void corgi_ssp_blduty_set(int duty)
{
corgi_ssp_lcdtg_send(0x02,duty);
}
EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
EXPORT_SYMBOL(corgi_ssp_blduty_set);
/*
* Max1111 Routines
*/
int corgi_ssp_max1111_get(ulong data)
{
unsigned long flag;
long voltage = 0, voltage1 = 0, voltage2 = 0;
spin_lock_irqsave(&corgi_ssp_lock, flag);
if (ssp_machinfo->cs_max1111 >= 0)
GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
ssp_enable(&corgi_ssp_dev);
udelay(1);
/* TB1/RB1 */
ssp_write_word(&corgi_ssp_dev,data);
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
/* TB12/RB2 */
ssp_write_word(&corgi_ssp_dev,0);
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
/* TB13/RB3*/
ssp_write_word(&corgi_ssp_dev,0);
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
if (ssp_machinfo->cs_max1111 >= 0)
GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
if (voltage1 & 0xc0 || voltage2 & 0x3f)
voltage = -1;
else
voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
return voltage;
}
EXPORT_SYMBOL(corgi_ssp_max1111_get);
/*
* Support Routines
*/
void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
{
ssp_machinfo = machinfo;
}
static int __init corgi_ssp_probe(struct platform_device *dev)
{
int ret;
/* Chip Select - Disable All */
if (ssp_machinfo->cs_lcdcon >= 0)
pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH);
if (ssp_machinfo->cs_max1111 >= 0)
pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
if (ssp_machinfo->cs_ads7846 >= 0)
pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
if (ret)
printk(KERN_ERR "Unable to register SSP handler!\n");
else {
ssp_disable(&corgi_ssp_dev);
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
ssp_enable(&corgi_ssp_dev);
}
return ret;
}
static int corgi_ssp_remove(struct platform_device *dev)
{
ssp_exit(&corgi_ssp_dev);
return 0;
}
static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
{
ssp_flush(&corgi_ssp_dev);
ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
return 0;
}
static int corgi_ssp_resume(struct platform_device *dev)
{
if (ssp_machinfo->cs_lcdcon >= 0)
GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
if (ssp_machinfo->cs_max1111 >= 0)
GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
if (ssp_machinfo->cs_ads7846 >= 0)
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
ssp_enable(&corgi_ssp_dev);
return 0;
}
static struct platform_driver corgissp_driver = {
.probe = corgi_ssp_probe,
.remove = corgi_ssp_remove,
.suspend = corgi_ssp_suspend,
.resume = corgi_ssp_resume,
.driver = {
.name = "corgi-ssp",
},
};
int __init corgi_ssp_init(void)
{
return platform_driver_register(&corgissp_driver);
}
arch_initcall(corgi_ssp_init);
......@@ -113,6 +113,7 @@
* Shared data structures
*/
extern struct platform_device corgiscoop_device;
extern struct platform_device corgissp_device;
#endif /* __ASM_ARCH_CORGI_H */
......@@ -187,4 +187,5 @@
*/
extern struct platform_device spitzscoop_device;
extern struct platform_device spitzscoop2_device;
extern struct platform_device spitzssp_device;
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
......@@ -116,20 +116,33 @@ struct battery_thresh spitz_battery_levels_noac[] = {
{ 0, 0},
};
/* MAX1111 Commands */
#define MAXCTRL_PD0 1u << 0
#define MAXCTRL_PD1 1u << 1
#define MAXCTRL_SGL 1u << 2
#define MAXCTRL_UNI 1u << 3
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR 1u << 7
/*
* Read MAX1111 ADC
*/
extern int max1111_read_channel(int);
int sharpsl_pm_pxa_read_max1111(int channel)
{
if (machine_is_tosa()) // Ugly, better move this function into another module
return 0;
#ifdef CONFIG_CORGI_SSP_DEPRECATED
return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
#else
extern int max1111_read_channel(int);
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/
return max1111_read_channel(channel >> 1);
#endif
}
void sharpsl_pm_pxa_init(void)
......
......@@ -400,9 +400,9 @@ config CPU_FEROCEON_OLD_ID
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
default y if ARCH_MX3
default y if ARCH_MSM7X00A
default y if ARCH_MSM
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_NOIFAR
......
......@@ -180,8 +180,8 @@ __v7_setup:
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
#endif
ldr r5, =0x40e040e0
ldr r6, =0xff0aa1a8
ldr r5, =0xff0aa1a8
ldr r6, =0x40e040e0
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
adr r5, v7_crval
......
......@@ -42,8 +42,9 @@ config TOUCHSCREEN_BITSY
module will be called h3600_ts_input.
config TOUCHSCREEN_CORGI
tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
depends on PXA_SHARPSL
select CORGI_SSP_DEPRECATED
default y
help
Say Y here to enable the driver for the touchscreen on the
......@@ -54,6 +55,9 @@ config TOUCHSCREEN_CORGI
To compile this driver as a module, choose M here: the
module will be called corgi_ts.
NOTE: this driver is deprecated, try enable SPI and generic
ADS7846-based touchscreen driver.
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
......
......@@ -124,7 +124,7 @@ config BACKLIGHT_ATMEL_PWM
called atmel-pwm-bl.
config BACKLIGHT_CORGI
tristate "Generic (aka Sharp Corgi) Backlight Driver"
tristate "Generic (aka Sharp Corgi) Backlight Driver (DEPRECATED)"
depends on BACKLIGHT_CLASS_DEVICE
default n
help
......@@ -132,6 +132,9 @@ config BACKLIGHT_CORGI
known as the Corgi backlight driver. If you have a Sharp Zaurus
SL-C7xx, SL-Cxx00 or SL-6000x say y. Most users can say n.
Note: this driver is marked as deprecated, try enable SPI and
use the new corgi_lcd driver with integrated backlight control
config BACKLIGHT_LOCOMO
tristate "Sharp LOCOMO LCD/Backlight Driver"
depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment