PCI: artpec6: Use generic DesignWare accessors

The dw_pcie_readl_rc() and dw_pcie_writel_rc() interfaces already add in
pp->dbi_base, so use those instead of doing it ourselves in the armada8k
driver.  No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>

drivers/pci/host/pcie-artpec6.c

@@ -139,7 +139,7 @@ static int artpec6_pcie_establish_link(struct pcie_port *pp)
 	 * Enable writing to config regs. This is required as the Synopsys
 	 * driver changes the class code. That register needs DBI write enable.
 	 */
-	writel(DBI_RO_WR_EN, pp->dbi_base + MISC_CONTROL_1_OFF);
+	dw_pcie_writel_rc(pp, MISC_CONTROL_1_OFF, DBI_RO_WR_EN);
 
 	pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;
 	pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;
@@ -159,8 +159,8 @@ static int artpec6_pcie_establish_link(struct pcie_port *pp)
 		return 0;
 
 	dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
-		readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
-		readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+		dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R0),
+		dw_pcie_readl_rc(pp, PCIE_PHY_DEBUG_R1));
 
 	return -ETIMEDOUT;
 }