Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Mostly bugfixes and a few small code removals.  Worth pointing out is:

   - A handful of more fixes to get DT enablement working properly on
     OMAP, finding new breakage of things that don't work quite right
     yet without the traditional board files.  I expect a bit more of
     this to come in this release as people test on their hardware.
   - Implementation of power_down_finish() on vexpress, to make kexec
     work and to stop the MCPM core to produce a warning (the warning
     was new to 3.13-rc1).
   - A handful of minor fixes for various platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm2835: add missing #xxx-cells to I2C nodes
  ARM: dts: Add max77686 RTC interrupt to cros5250-common
  ARM: vexpress/TC2: Implement MCPM power_down_finish()
  ARM: tegra: Provide dummy powergate implementation
  ARM: omap: fix warning with LPAE build
  ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init
  ARM: OMAP2+: Remove legacy mux code for display.c
  ARM: OMAP2+: Fix undefined reference to set_cntfreq
  gpio: twl4030: Fix passing of pdata in the device tree case
  gpio: twl4030: Fix regression for twl gpio output
  ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain
  ARM: dts: imx6qdl: disable spdif "rxtx5" clock option
  ARM: dts: Fix omap2 specific dtsi files by adding the missing entries
  ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x
  i2c: omap: Fix missing device tree flags for omap2

Documentation/devicetree/bindings/i2c/i2c-omap.txt

 I2C for OMAP platforms
 
 Required properties :
-- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- compatible : Must be "ti,omap2420-i2c", "ti,omap2430-i2c", "ti,omap3-i2c"
+  or "ti,omap4-i2c"
 - ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
 - #address-cells = <1>;
 - #size-cells = <0>;

arch/arm/boot/dts/bcm2835.dtsi

@@ -85,6 +85,8 @@ i2c0: i2c@20205000 {
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -93,6 +95,8 @@ i2c1: i2c@20804000 {
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/cros5250-common.dtsi

@@ -27,6 +27,13 @@ pinctrl@11400000 {
 		i2c2_bus: i2c2-bus {
 			samsung,pin-pud = <0>;
 		};
+
+		max77686_irq: max77686-irq {
+			samsung,pins = "gpx3-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	i2c@12C60000 {
@@ -35,6 +42,11 @@ i2c@12C60000 {
 
 		max77686@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			wakeup-source;
 			reg = <0x09>;
 
 			voltage-regulators {

arch/arm/boot/dts/imx6qdl.dtsi

@@ -161,7 +161,7 @@ spdif: spdif@02004000 {
 					clocks = <&clks 197>, <&clks 3>,
 						 <&clks 197>, <&clks 107>,
 						 <&clks 0>,   <&clks 118>,
-						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>,  <&clks 139>,
 						 <&clks 0>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",

arch/arm/boot/dts/omap-zoom-common.dtsi

@@ -13,7 +13,7 @@ &gpmc {
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	8250@3,0 {
+	uart@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 0x100>;
 		bank-width = <2>;

arch/arm/boot/dts/omap2.dtsi

@@ -9,6 +9,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
 #include "skeleton.dtsi"
@@ -21,6 +22,8 @@ aliases {
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
 	};
 
 	cpus {
@@ -53,6 +56,28 @@ ocp {
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480a6000 {
+			compatible = "ti,omap2-aes";
+			ti,hwmods = "aes";
+			reg = <0x480a6000 0x50>;
+			dmas = <&sdma 9 &sdma 10>;
+			dma-names = "tx", "rx";
+		};
+
+		hdq1w: 1w@480b2000 {
+			compatible = "ti,omap2420-1w";
+			ti,hwmods = "hdq1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -63,6 +88,7 @@ intc: interrupt-controller@1 {
 
 		sdma: dma-controller@48056000 {
 			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+			ti,hwmods = "dma";
 			reg = <0x48056000 0x1000>;
 			interrupts = <12>,
 				     <13>,
@@ -73,21 +99,91 @@ sdma: dma-controller@48056000 {
 			#dma-requests = <64>;
 		};
 
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48070000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x48072000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: mcspi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi1";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: mcspi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi2";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		rng: rng@480a0000 {
+			compatible = "ti,omap2-rng";
+			ti,hwmods = "rng";
+			reg = <0x480a0000 0x50>;
+			interrupts = <36>;
+		};
+
+		sham: sham@480a4000 {
+			compatible = "ti,omap2-sham";
+			ti,hwmods = "sham";
+			reg = <0x480a4000 0x64>;
+			interrupts = <51>;
+			dmas = <&sdma 13>;
+			dma-names = "rx";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart1";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart2";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@4806e000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart3";
+			reg = <0x4806e000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 

arch/arm/boot/dts/omap2420.dtsi

@@ -114,6 +114,15 @@ mcbsp2: mcbsp@48076000 {
 			dma-names = "tx", "rx";
 		};
 
+		msdi1: mmc@4809c000 {
+			compatible = "ti,omap2420-mmc";
+			ti,hwmods = "msdi1";
+			reg = <0x4809c000 0x80>;
+			interrupts = <83>;
+			dmas = <&sdma 61 &sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;
@@ -121,5 +130,19 @@ timer1: timer@48028000 {
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		wd_timer2: wdt@48022000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x48022000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2420-i2c";
+};

arch/arm/boot/dts/omap2430.dtsi

@@ -175,6 +175,25 @@ mcbsp5: mcbsp@48096000 {
 			dma-names = "tx", "rx";
 		};
 
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;
@@ -182,5 +201,35 @@ timer1: timer@49018000 {
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		mcspi3: mcspi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi3";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		usb_otg_hs: usb_otg_hs@480ac000 {
+			compatible = "ti,omap2-musb";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x480ac000 0x1000>;
+			interrupts = <93>;
+		};
+
+		wd_timer2: wdt@49016000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x49016000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2430-i2c";
+};

arch/arm/mach-omap2/Makefile

@@ -19,11 +19,11 @@ secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
-obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
-obj-$(CONFIG_SOC_OMAP5)	 += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_OMAP5)	 += $(hwmod-common) $(secure-common)
 obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common)
-obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o

arch/arm/mach-omap2/common.h

@@ -299,7 +299,6 @@ struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 struct omap2_hsmmc_info;
-extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers);
 extern void omap_reserve(void);
 
 struct omap_hwmod;

arch/arm/mach-omap2/display.c

@@ -32,7 +32,6 @@
 
 #include "soc.h"
 #include "iomap.h"
-#include "mux.h"
 #include "control.h"
 #include "display.h"
 #include "prm.h"
@@ -102,90 +101,13 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
-static void __init omap4_tpd12s015_mux_pads(void)
-{
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
-static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
-{
-	u32 reg;
-	u16 control_i2c_1;
-
-	/*
-	 * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and
-	 * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable
-	 * internal pull up resistor.
-	 */
-	if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) {
-		control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1;
-		reg = omap4_ctrl_pad_readl(control_i2c_1);
-		reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK |
-			OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK);
-			omap4_ctrl_pad_writel(reg, control_i2c_1);
-	}
-}
-
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
-{
-	u32 enable_mask, enable_shift;
-	u32 pipd_mask, pipd_shift;
-	u32 reg;
-
-	if (dsi_id == 0) {
-		enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI1_PIPD_MASK;
-		pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
-	} else if (dsi_id == 1) {
-		enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
-		enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
-		pipd_mask = OMAP4_DSI2_PIPD_MASK;
-		pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
-	} else {
-		return -ENODEV;
-	}
-
-	reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	reg &= ~enable_mask;
-	reg &= ~pipd_mask;
-
-	reg |= (lanes << enable_shift) & enable_mask;
-	reg |= (lanes << pipd_shift) & pipd_mask;
-
-	omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
-
-	return 0;
-}
-
-int __init omap_hdmi_init(enum omap_hdmi_flags flags)
-{
-	if (cpu_is_omap44xx()) {
-		omap4_hdmi_mux_pads(flags);
-		omap4_tpd12s015_mux_pads();
-	}
-
-	return 0;
-}
-
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
-	if (cpu_is_omap44xx())
-		return omap4_dsi_mux_pads(dsi_id, lane_mask);
-
 	return 0;
 }
 
 static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 {
-	if (cpu_is_omap44xx())
-		omap4_dsi_mux_pads(dsi_id, 0);
 }
 
 static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput)

arch/arm/mach-omap2/gpmc.c

@@ -1501,6 +1501,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 		return ret;
 	}
 
+	/*
+	 * For some GPMC devices we still need to rely on the bootloader
+	 * timings because the devices can be connected via FPGA. So far
+	 * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
+	 * REVISIT: Add timing support from slls644g.pdf and from the
+	 * lan91c96 manual.
+	 */
+	if (of_device_is_compatible(child, "ns16550a") ||
+	    of_device_is_compatible(child, "smsc,lan91c94") ||
+	    of_device_is_compatible(child, "smsc,lan91c111")) {
+		dev_warn(&pdev->dev,
+			 "%s using bootloader timings on CS%d\n",
+			 child->name, cs);
+		goto no_timings;
+	}
+
 	/*
 	 * FIXME: gpmc_cs_request() will map the CS to an arbitary
 	 * location in the gpmc address space. When booting with
@@ -1529,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	gpmc_read_timings_dt(child, &gpmc_t);
 	gpmc_cs_set_timings(cs, &gpmc_t);
 
+no_timings:
 	if (of_platform_device_create(child, NULL, &pdev->dev))
 		return 0;
 
@@ -1541,42 +1558,6 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	return ret;
 }
 
-/*
- * REVISIT: Add timing support from slls644g.pdf
- */
-static int gpmc_probe_8250(struct platform_device *pdev,
-				struct device_node *child)
-{
-	struct resource res;
-	unsigned long base;
-	int ret, cs;
-
-	if (of_property_read_u32(child, "reg", &cs) < 0) {
-		dev_err(&pdev->dev, "%s has no 'reg' property\n",
-			child->full_name);
-		return -ENODEV;
-	}
-
-	if (of_address_to_resource(child, 0, &res) < 0) {
-		dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
-			child->full_name);
-		return -ENODEV;
-	}
-
-	ret = gpmc_cs_request(cs, resource_size(&res), &base);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
-		return ret;
-	}
-
-	if (of_platform_device_create(child, NULL, &pdev->dev))
-		return 0;
-
-	dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
-
-	return -ENODEV;
-}
-
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
 	int ret;
@@ -1618,10 +1599,9 @@ static int gpmc_probe_dt(struct platform_device *pdev)
 		else if (of_node_cmp(child->name, "onenand") == 0)
 			ret = gpmc_probe_onenand_child(pdev, child);
 		else if (of_node_cmp(child->name, "ethernet") == 0 ||
-			 of_node_cmp(child->name, "nor") == 0)
+			 of_node_cmp(child->name, "nor") == 0 ||
+			 of_node_cmp(child->name, "uart") == 0)
 			ret = gpmc_probe_generic_child(pdev, child);
-		else if (of_node_cmp(child->name, "8250") == 0)
-			ret = gpmc_probe_8250(pdev, child);
 
 		if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
 			 __func__, child->full_name))

arch/arm/mach-omap2/omap-secure.h

@@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 void set_cntfreq(void);
+#else
+static inline void set_cntfreq(void)
+{
+}
+#endif
+
 #endif /* __ASSEMBLER__ */
 #endif /* OMAP_ARCH_OMAP_SECURE_H */

arch/arm/mach-omap2/omap4-common.c

@@ -35,7 +35,6 @@
 #include "iomap.h"
 #include "common.h"
 #include "mmc.h"
-#include "hsmmc.h"
 #include "prminst44xx.h"
 #include "prcm_mpu44xx.h"
 #include "omap4-sar-layout.h"
@@ -284,59 +283,3 @@ void __init omap_gic_of_init(void)
 	omap_wakeupgen_init();
 	irqchip_init();
 }
-
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
-	int irq = 0;
-	struct platform_device *pdev = container_of(dev,
-				struct platform_device, dev);
-	struct omap_mmc_platform_data *pdata = dev->platform_data;
-
-	/* Setting MMC1 Card detect Irq */
-	if (pdev->id == 0) {
-		irq = twl6030_mmc_card_detect_config();
-		if (irq < 0) {
-			dev_err(dev, "%s: Error card detect config(%d)\n",
-				__func__, irq);
-			return irq;
-		}
-		pdata->slots[0].card_detect_irq = irq;
-		pdata->slots[0].card_detect = twl6030_mmc_card_detect;
-	}
-	return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
-	struct omap_mmc_platform_data *pdata;
-
-	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
-	if (!dev) {
-		pr_err("Failed %s\n", __func__);
-		return;
-	}
-	pdata = dev->platform_data;
-	pdata->init =	omap4_twl6030_hsmmc_late_init;
-}
-
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	struct omap2_hsmmc_info *c;
-
-	omap_hsmmc_init(controllers);
-	for (c = controllers; c->mmc; c++) {
-		/* pdev can be null if CONFIG_MMC_OMAP_HS is not set */
-		if (!c->pdev)
-			continue;
-		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-	}
-
-	return 0;
-}
-#else
-int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
-	return 0;
-}
-#endif

arch/arm/mach-omap2/pm34xx.c

@@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void)
 		 * will hang the system.
 		 */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
-		ret = _omap_save_secure_sram((u32 *)
+		ret = _omap_save_secure_sram((u32 *)(unsigned long)
 				__pa(omap3_secure_ram_storage));
 		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */

arch/arm/mach-omap2/prm44xx_54xx.h

@@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
-	defined(CONFIG_SOC_DRA7XX)
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
 void omap44xx_prm_reconfigure_io_chain(void);
 #else
 static inline void omap44xx_prm_reconfigure_io_chain(void)

arch/arm/mach-vexpress/spc.c

@@ -53,6 +53,11 @@
 #define A15_BX_ADDR0		0x68
 #define A7_BX_ADDR0		0x78
 
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT		0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu)	(1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu)	(1 << (3 + (cpu)))
+
 /* SPC system config interface registers */
 #define SYSCFG_WDATA		0x70
 #define SYSCFG_RDATA		0x74
@@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable)
 	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
 }
 
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+	return cluster_is_a15(cluster) ?
+		  STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+		: STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+	int ret;
+	u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+	if (cluster >= MAX_CLUSTERS)
+		return 1;
+
+	ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+	pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+		 __func__, STANDBYWFI_STAT, ret, mask);
+
+	return ret & mask;
+}
+
 static int ve_spc_get_performance(int cluster, u32 *freq)
 {
 	struct ve_spc_opp *opps = info->opps[cluster];

arch/arm/mach-vexpress/spc.h

@@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set);
 void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
 void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
 void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
 
 #endif

arch/arm/mach-vexpress/tc2_pm.c

@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -32,11 +33,17 @@
 #include "spc.h"
 
 /* SCC conf registers */
+#define RESET_CTRL		0x018
+#define RESET_A15_NCORERESET(cpu)	(1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu)	(1 << (16 + (cpu)))
+
 #define A15_CONF		0x400
 #define A7_CONF			0x500
 #define SYS_INFO		0x700
 #define SPC_BASE		0xb00
 
+static void __iomem *scc;
+
 /*
  * We can't use regular spinlocks. In the switcher case, it is possible
  * for an outbound CPU to call power_down() after its inbound counterpart
@@ -190,6 +197,55 @@ static void tc2_pm_power_down(void)
 	tc2_pm_down(0);
 }
 
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+	u32 mask = cluster ?
+		  RESET_A7_NCORERESET(cpu)
+		: RESET_A15_NCORERESET(cpu);
+
+	return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster)
+{
+	unsigned tries;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+		/*
+		 * Only examine the hardware state if the target CPU has
+		 * caught up at least as far as tc2_pm_down():
+		 */
+		if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) {
+			pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+				 __func__, cpu, cluster,
+				 readl_relaxed(scc + RESET_CTRL));
+
+			/*
+			 * We need the CPU to reach WFI, but the power
+			 * controller may put the cluster in reset and
+			 * power it off as soon as that happens, before
+			 * we have a chance to see STANDBYWFI.
+			 *
+			 * So we need to check for both conditions:
+			 */
+			if (tc2_core_in_reset(cpu, cluster) ||
+			    ve_spc_cpu_in_wfi(cpu, cluster))
+				return 0; /* success: the CPU is halted */
+		}
+
+		/* Otherwise, wait and retry: */
+		msleep(POLL_MSEC);
+	}
+
+	return -ETIMEDOUT; /* timeout */
+}
+
 static void tc2_pm_suspend(u64 residency)
 {
 	unsigned int mpidr, cpu, cluster;
@@ -234,6 +290,7 @@ static void tc2_pm_powered_up(void)
 static const struct mcpm_platform_ops tc2_pm_power_ops = {
 	.power_up		= tc2_pm_power_up,
 	.power_down		= tc2_pm_power_down,
+	.power_down_finish	= tc2_pm_power_down_finish,
 	.suspend		= tc2_pm_suspend,
 	.powered_up		= tc2_pm_powered_up,
 };
@@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
 static int __init tc2_pm_init(void)
 {
 	int ret, irq;
-	void __iomem *scc;
 	u32 a15_cluster_id, a7_cluster_id, sys_info;
 	struct device_node *np;
 

drivers/gpio/gpio-twl4030.c

@@ -354,17 +354,18 @@ static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
 static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct gpio_twl4030_priv *priv = to_gpio_twl4030(chip);
+	int ret = -EINVAL;
 
 	mutex_lock(&priv->mutex);
 	if (offset < TWL4030_GPIO_MAX)
-		twl4030_set_gpio_dataout(offset, value);
+		ret = twl4030_set_gpio_direction(offset, 0);
 
 	priv->direction |= BIT(offset);
 	mutex_unlock(&priv->mutex);
 
 	twl_set(chip, offset, value);
 
-	return 0;
+	return ret;
 }
 
 static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
@@ -435,7 +436,8 @@ static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
 
 static int gpio_twl4030_remove(struct platform_device *pdev);
 
-static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
+static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev,
+				struct twl4030_gpio_platform_data *pdata)
 {
 	struct twl4030_gpio_platform_data *omap_twl_info;
 
@@ -443,6 +445,9 @@ static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev)
 	if (!omap_twl_info)
 		return NULL;
 
+	if (pdata)
+		*omap_twl_info = *pdata;
+
 	omap_twl_info->use_leds = of_property_read_bool(dev->of_node,
 			"ti,use-leds");
 
@@ -500,7 +505,7 @@ static int gpio_twl4030_probe(struct platform_device *pdev)
 	mutex_init(&priv->mutex);
 
 	if (node)
-		pdata = of_gpio_twl4030(&pdev->dev);
+		pdata = of_gpio_twl4030(&pdev->dev, pdata);
 
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "Platform data is missing\n");

drivers/i2c/busses/i2c-omap.c

@@ -1037,6 +1037,20 @@ static const struct i2c_algorithm omap_i2c_algo = {
 };
 
 #ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap2420_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_NO_FIFO |
+			OMAP_I2C_FLAG_SIMPLE_CLOCK |
+			OMAP_I2C_FLAG_16BIT_DATA_REG |
+			OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap2430_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
+			OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
+};
+
 static struct omap_i2c_bus_platform_data omap3_pdata = {
 	.rev = OMAP_I2C_IP_VERSION_1,
 	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
@@ -1055,6 +1069,14 @@ static const struct of_device_id omap_i2c_of_match[] = {
 		.compatible = "ti,omap3-i2c",
 		.data = &omap3_pdata,
 	},
+	{
+		.compatible = "ti,omap2430-i2c",
+		.data = &omap2430_pdata,
+	},
+	{
+		.compatible = "ti,omap2420-i2c",
+		.data = &omap2420_pdata,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, omap_i2c_of_match);

include/linux/tegra-powergate.h

@@ -45,6 +45,7 @@ struct clk;
 
 #define TEGRA_POWERGATE_3D0	TEGRA_POWERGATE_3D
 
+#ifdef CONFIG_ARCH_TEGRA
 int tegra_powergate_is_powered(int id);
 int tegra_powergate_power_on(int id);
 int tegra_powergate_power_off(int id);
@@ -52,5 +53,31 @@ int tegra_powergate_remove_clamping(int id);
 
 /* Must be called with clk disabled, and returns with clk enabled */
 int tegra_powergate_sequence_power_up(int id, struct clk *clk);
+#else
+static inline int tegra_powergate_is_powered(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_on(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_power_off(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_remove_clamping(int id)
+{
+	return -ENOSYS;
+}
+
+static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk)
+{
+	return -ENOSYS;
+}
+#endif
 
 #endif /* _MACH_TEGRA_POWERGATE_H_ */