Documentation: update broken web addresses.

Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/ABI/testing/sysfs-devices-memory

@@ -7,7 +7,7 @@ Description:
 		added or removed dynamically to represent hot-add/remove
 		operations.
 Users:		hotplug memory add/remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 What:		/sys/devices/system/memory/memoryX/removable
 Date:		June 2008
@@ -19,7 +19,7 @@ Description:
 		identify removable sections of the memory before attempting
 		potentially expensive hot-remove memory operation
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils	
 
 What:		/sys/devices/system/memory/memoryX/phys_device
 Date:		September 2008
@@ -58,7 +58,7 @@ Description:
 		by root to offline that section.
 		# echo offline > /sys/devices/system/memory/memory22/state
 Users:		hotplug memory remove tools
-		https://w3.opensource.ibm.com/projects/powerpc-utils/
+		http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
 
 
 What:		/sys/devices/system/memoryX/nodeY

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -197,7 +197,7 @@ Description:	These files exist in every cpu's cache index directories.
 		Currently, only AMD Family 10h Processors support cache index
 		disable, and only for their L3 caches.  See the BIOS and
 		Kernel Developer's Guide at
-		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf	
 		for formatting information and other details on the
 		cache index disable.
 Users:    joachim.deguara@amd.com

Documentation/DocBook/scsi.tmpl

@@ -393,7 +393,7 @@
         </para>
         <para>
           For documentation see
-          <ulink url='http://www.torque.net/sg/sdebug26.html'>http://www.torque.net/sg/sdebug26.html</ulink>
+          <ulink url='http://sg.danny.cz/sg/sdebug26.html'>http://sg.danny.cz/sg/sdebug26.html</ulink>
         </para>
 <!-- !Edrivers/scsi/scsi_debug.c -->
       </sect2>

Documentation/DocBook/v4l/compat.xml

@@ -1091,8 +1091,9 @@ signed 64-bit integer. Output devices should not send a buffer out
 until the time in the timestamp field has arrived. I would like to
 follow SGI's lead, and adopt a multimedia timestamping system like
 their UST (Unadjusted System Time). See
-http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is
-no longer valid.] UST uses timestamps that are 64-bit signed integers
+http://web.archive.org/web/*/http://reality.sgi.com
+/cpirazzi_engr/lg/time/intro.html. 
+UST uses timestamps that are 64-bit signed integers
 (not struct timeval's) and given in nanosecond units. The UST clock
 starts at zero when the system is booted and runs continuously and
 uniformly. It takes a little over 292 years for UST to overflow. There

Documentation/DocBook/v4l/fdl-appendix.xml

@@ -2,7 +2,7 @@
      The GNU Free Documentation License 1.1 in DocBook
      Markup by Eric Baudais <baudais@okstate.edu>
      Maintained by the GNOME Documentation Project
-     http://developer.gnome.org/projects/gdp
+     http://live.gnome.org/DocumentationProject
      Version: 1.0.1
      Last Modified: Nov 16, 2000
 -->

Documentation/HOWTO

@@ -187,7 +187,7 @@ apply a patch.
 If you do not know where you want to start, but you want to look for
 some task to start doing to join into the kernel development community,
 go to the Linux Kernel Janitor's project:
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors	
 It is a great place to start.  It describes a list of relatively simple
 problems that need to be cleaned up and fixed within the Linux kernel
 source tree.  Working with the developers in charge of this project, you
@@ -315,7 +315,7 @@ process is tracked with the tool patchwork.  Patchwork offers a web
 interface which shows patch postings, any comments on a patch or
 revisions to it, and maintainers can mark patches as under review,
 accepted, or rejected.  Most of these patchwork sites are listed at
-http://patchwork.kernel.org/ or http://patchwork.ozlabs.org/.
+http://patchwork.kernel.org/.
 
 2.6.x -next kernel tree for integration tests
 ---------------------------------------------
@@ -595,7 +595,7 @@ start exactly where you are now.
 
 ----------
 Thanks to Paolo Ciarrocchi who allowed the "Development Process"
-(http://linux.tar.bz/articles/2.6-development_process) section
+(http://lwn.net/Articles/94386/) section
 to be based on text he had written, and to Randy Dunlap and Gerrit
 Huizenga for some of the list of things you should and should not say.
 Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,

Documentation/RCU/RTFP.txt

@@ -606,7 +606,7 @@ Suparna Bhattacharya"
 ,Year="2006"
 ,pages="v2 123-138"
 ,note="Available:
-\url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184}
+\url{http://www.linuxsymposium.org/2006/index_2006.php}
 \url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf}
 [Viewed January 1, 2007]"
 ,annotation="

Documentation/SubmittingDrivers

@@ -161,7 +161,7 @@ How to NOT write kernel driver by Arjan van de Ven:
 	http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
 
 Kernel Janitor:
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 
 GIT, Fast Version Control System:
 	http://git-scm.com/

Documentation/aoe/aoe.txt

 The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
 
-  http://www.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html
+  http://www.coraid.com/SUPPORT/EtherDrive-HBA  
 
   It has many tips and hints!
 

Documentation/arm/IXP2000

@@ -14,7 +14,7 @@ telecom systems. In addition to an XScale core, it contains up to 8
 interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port,
 flash interface, and some other odds and ends. For more information, see:
 
-http://developer.intel.com/design/network/products/npfamily/ixp2xxx.htm
+http://developer.intel.com
 
 2. Linux Support
 

Documentation/arm/IXP4xx

@@ -45,7 +45,7 @@ require the use of Intel's propietary CSR softare:
 If you need to use any of the above, you need to download Intel's
 software from:
 
-   http://developer.intel.com/design/network/products/npfamily/ixp425swr1.htm
+   http://developer.intel.com/design/network/products/npfamily/ixp425.htm    
 
 DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY
 SOFTWARE.
@@ -53,7 +53,7 @@ SOFTWARE.
 There are several websites that provide directions/pointers on using
 Intel's software:
 
-http://ixp4xx-osdg.sourceforge.net/ 
+   http://sourceforge.net/projects/ixp4xx-osdg/
    Open Source Developer's Guide for using uClinux and the Intel libraries 
 
 http://gatewaymaker.sourceforge.net/ 
@@ -112,21 +112,21 @@ http://www.adiengineering.com/productsCoyote.html
    Finally, there is an IDE port hanging off the expansion bus.
 
 Gateworks Avila Network Platform
-http://www.gateworks.com/avila_sbc.htm
+http://www.gateworks.com/support/overview.php
 
    The Avila platform is basically and IXDP425 with the 4 PCI slots
    replaced with mini-PCI slots and a CF IDE interface hanging off
    the expansion bus.
 
 Intel IXDP425 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp425.htm
+http://www.intel.com/design/network/products/npfamily/ixdpg425.htm  
 
    This is Intel's standard reference platform for the IXDP425 and is 
    also known as the Richfield board. It contains 4 PCI slots, 16MB
    of flash, two 10/100 ports and one ADSL port.
 
 Intel IXDP465 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp465.htm
+http://www.intel.com/design/network/products/npfamily/ixdp465.htm
 
    This is basically an IXDP425 with an IXP465 and 32M of flash instead
    of just 16.
@@ -141,15 +141,13 @@ Intel IXDPG425 Development Platform
    a pivot_root to NFS.
 
 Motorola PrPMC1100 Processor Mezanine Card
-http://www.fountainsys.com/datasheet/PrPMC1100.pdf
+http://www.fountainsys.com
 
    The PrPMC1100 is based on the IXCP1100 and is meant to plug into
    and IXP2400/2800 system to act as the system controller. It simply
    contains a CPU and 16MB of flash on the board and needs to be
    plugged into a carrier board to function. Currently Linux only
    supports the Motorola PrPMC carrier board for this platform.
-   See https://mcg.motorola.com/us/ds/pdf/ds0144.pdf for info
-   on the carrier board.
 
 5. TODO LIST
 

Documentation/arm/README

@@ -41,12 +41,12 @@ Bug reports etc
 ---------------
 
   Please send patches to the patch system.  For more information, see
-  http://www.arm.linux.org.uk/patches/info.html  Always include some
+  http://www.arm.linux.org.uk/developer/patches/info.php Always include some
   explanation as to what the patch does and why it is needed.
 
   Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
   or submitted through the web form at
-  http://www.arm.linux.org.uk/forms/solution.shtml
+  http://www.arm.linux.org.uk/developer/ 
 
   When sending bug reports, please ensure that they contain all relevant
   information, eg. the kernel messages that were printed before/during

Documentation/arm/SA1100/Assabet

@@ -2,8 +2,7 @@ The Intel Assabet (SA-1110 evaluation) board
 ============================================
 
 Please see:
-http://developer.intel.com/design/strong/quicklist/eval-plat/sa-1110.htm
-http://developer.intel.com/design/strong/guides/278278.htm
+http://developer.intel.com
 
 Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>:
 http://www.cs.cmu.edu/~wearable/software/assabet.html
@@ -64,7 +63,7 @@ Initial RedBoot configuration
 -----------------------------
 
 The commands used here are explained in The RedBoot User's Guide available
-on-line at http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html.
+on-line at http://sources.redhat.com/ecos/docs.html.
 Please refer to it for explanations.
 
 If you have a CF network card (my Assabet kit contained a CF+ LP-E from

Documentation/arm/SA1100/Brutus

 Brutus is an evaluation platform for the SA1100 manufactured by Intel.  
 For more details, see:
 
-http://developer.intel.com/design/strong/applnots/sa1100lx/getstart.htm
+http://developer.intel.com
 
 To compile for Brutus, you must issue the following commands:
 

Documentation/arm/SA1100/FreeBird

 Freebird-1.1 is produced by Legned(C) ,Inc.
-(http://www.legend.com.cn)
+http://web.archive.org/web/*/http://www.legend.com.cn
 and software/linux mainatined by Coventive(C),Inc.
 (http://www.coventive.com)
 

Documentation/arm/SA1100/GraphicsClient

@@ -71,7 +71,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:

Documentation/arm/SA1100/GraphicsMaster

@@ -28,7 +28,7 @@ Supported peripherals:
 - serial ports (ttyS[0-2])
   - ttyS0 is default for serial console
 - Smart I/O (ADC, keypad, digital inputs, etc)
-  See http://www.applieddata.com/developers/linux for IOCTL documentation
+  See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
   and example user space code. ps/2 keybd is multiplexed through this driver
 
 To do:

Documentation/arm/SA1100/Itsy

@@ -4,7 +4,7 @@ research projects at Compaq that are related to pocket computing.
 
 For more information, see:
 
-	http://www.research.digital.com/wrl/itsy/index.html
+	http://www.hpl.hp.com/downloads/crl/itsy/
 
 Notes on initial 2.4 Itsy support (8/27/2000) :
 The port was done on an Itsy version 1.5 machine with a daughtercard with

Documentation/arm/SA1100/PLEB

@@ -6,6 +6,6 @@ PLEB support has yet to be fully integrated.
 
 For more information, see:
 
-	http://www.cse.unsw.edu.au/~pleb/
+	http://www.cse.unsw.edu.au
 
 

Documentation/arm/SA1100/Victor

@@ -3,7 +3,7 @@ VisuAide, Inc. to be used by blind people.
 
 For more information related to Victor, see:
 
-	http://www.visuaide.com/victor
+	http://www.humanware.com/en-usa/products
 
 Of course Victor is using Linux as its main operating system.
 The Victor implementation for Linux is maintained by Nicolas Pitre:

Documentation/arm/SA1100/nanoEngine

@@ -7,5 +7,5 @@ for more info.
 (Ref: Stuart Adams <sja@brightstareng.com>)
 
 Also visit Larry Doolittle's "Linux for the nanoEngine" site:
-http://recycle.lbl.gov/~ldoolitt/bse/
+http://www.brightstareng.com/arm/nanoeng.htm
 

Documentation/binfmt_misc.txt

@@ -111,6 +111,6 @@ cause unexpected behaviour and can be a security hazard.
 
 
 There is a web page about binfmt_misc at
-http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html
+http://www.tat.physik.uni-tuebingen.de
 
 Richard Günther <rguenth@tat.physik.uni-tuebingen.de>

Documentation/blockdev/paride.txt

@@ -412,6 +412,6 @@ have in your mail headers, when sending mail to the list server.
 You might also find some useful information on the linux-parport
 web pages (although they are not always up to date) at
 
-	http://www.torque.net/parport/
+	http://web.archive.org/web/*/http://www.torque.net/parport/
 
 

Documentation/cdrom/packet-writing.txt

@@ -95,7 +95,7 @@ Using the pktcdvd sysfs interface
 
 Since Linux 2.6.20, the pktcdvd module has a sysfs interface
 and can be controlled by it. For example the "pktcdvd" tool uses
-this interface. (see http://people.freenet.de/BalaGi#pktcdvd )
+this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
 
 "pktcdvd" works similar to "pktsetup", e.g.:
 

Documentation/cgroups/cpusets.txt

@@ -691,7 +691,7 @@ There are ways to query or modify cpusets:
    cat, rmdir commands from the shell, or their equivalent from C.
  - via the C library libcpuset.
  - via the C library libcgroup.
-   (http://sourceforge.net/proects/libcg/)
+   (http://sourceforge.net/projects/libcg/)
  - via the python application cset.
    (http://developer.novell.com/wiki/index.php/Cpuset)
 

Documentation/development-process/4.Coding

@@ -281,7 +281,7 @@ With sparse, the programmer can be warned about confusion between
 user-space and kernel-space addresses, mixture of big-endian and
 small-endian quantities, the passing of integer values where a set of bit
 flags is expected, and so on.  Sparse must be installed separately (it can
-be found at http://www.kernel.org/pub/software/devel/sparse/ if your
+be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your
 distributor does not package it); it can then be run on the code by adding
 "C=1" to your make command.
 

Documentation/device-mapper/dm-crypt.txt

@@ -36,7 +36,7 @@ Example scripts
 ===============
 LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
 encryption with dm-crypt using the 'cryptsetup' utility, see
-http://luks.endorphin.org/
+http://clemens.endorphin.org/cryptography
 
 [[
 #!/bin/sh

Documentation/devices.txt

@@ -1517,7 +1517,7 @@ Your cooperation is appreciated.
 		    ...
 
 		The driver and documentation may be obtained from
-		http://www.proximity.com.au/~brian/winradio/
+		http://www.winradio.com/
 
  82 block	I2O hard disk
 		  0 = /dev/i2o/hdag	33rd I2O hard disk, whole disk
@@ -1723,7 +1723,7 @@ Your cooperation is appreciated.
 		  1 = /dev/comedi1	Second comedi device
 		    ...
 
-		See http://stm.lbl.gov/comedi or http://www.llp.fu-berlin.de/.
+		See http://stm.lbl.gov/comedi.
 
  98 block	User-mode virtual block device
 		  0 = /dev/ubda		First user-mode block device
@@ -1984,7 +1984,7 @@ Your cooperation is appreciated.
                 256 NetWare volumes can be supported in a single
                 machine.
 
-                http://www.kernel.org/pub/linux/kernel/people/jmerkey/nwfs
+                http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
 
                 0 = /dev/nwfs/v0    First NetWare (NWFS) Logical Volume
                 1 = /dev/nwfs/v1    Second NetWare (NWFS) Logical Volume
@@ -2591,7 +2591,8 @@ Your cooperation is appreciated.
 		  1 = /dev/intermezzo1	Second cache manager
 		    ...
 
-		See http://www.inter-mezzo.org/ for more information.
+		See http://web.archive.org/web/20080115195241/
+		http://inter-mezzo.org/index.html
 
 186 char	Object-based storage control device
 		  0 = /dev/obd0		First obd control device

Documentation/dvb/faq.txt

@@ -76,7 +76,7 @@ Some very frequently asked questions about linuxtv-dvb
 		the TuxBox CVS many interesting DVB applications and the dBox2
 		DVB source
 
-	http://sourceforge.net/projects/dvbsak/
+	http://www.linuxtv.org/downloads/	
 		DVB Swiss Army Knife library and utilities
 
 	http://www.nenie.org/misc/mpsys/

Documentation/fb/framebuffer.txt

@@ -330,7 +330,7 @@ and on its mirrors.
 
 The latest version of fbset can be found at
 
-    http://home.tvd.be/cr26864/Linux/fbdev/
+    http://www.linux-fbdev.org/ 
 
   
 10. Credits                                                       

Documentation/filesystems/9p.txt

@@ -128,7 +128,7 @@ OPTIONS
 RESOURCES
 =========
 
-Our current recommendation is to use Inferno (http://www.vitanuova.com/inferno)
+Our current recommendation is to use Inferno (http://www.vitanuova.com/nferno/index.html)
 as the 9p server.  You can start a 9p server under Inferno by issuing the
 following command:
    ; styxlisten -A tcp!*!564 export '#U*'

Documentation/filesystems/affs.txt

@@ -216,4 +216,4 @@ due to an incompatibility with the Amiga floppy controller.
 
 If you are interested in an Amiga Emulator for Linux, look at
 
-http://www.freiburg.linux.de/~uae/
+http://web.archive.org/web/*/http://www.freiburg.linux.de/~uae/

Documentation/filesystems/befs.txt

@@ -31,7 +31,7 @@ Current maintainer: Sergey S. Kostyliov <rathamahata@php4.ru>
 
 WHAT IS THIS DRIVER?
 ==================
-This module implements the native filesystem of BeOS <http://www.be.com/>
+This module implements the native filesystem of BeOS http://www.beincorporated.com/ 
 for the linux 2.4.1 and later kernels. Currently it is a read-only
 implementation.
 
@@ -61,7 +61,7 @@ step 2.  Configuration & make kernel
 
 The linux kernel has many compile-time options. Most of them are beyond the
 scope of this document. I suggest the Kernel-HOWTO document as a good general
-reference on this topic. <http://www.linux.com/howto/Kernel-HOWTO.html>
+reference on this topic. http://www.linuxdocs.org/HOWTOs/Kernel-HOWTO-4.html 
 
 However, to use the BeFS module, you must enable it at configure time.
 

Documentation/filesystems/isofs.txt

@@ -41,7 +41,7 @@ Mount options unique to the isofs filesystem.
   sbsector=xxx  Session begins from sector xxx
 
 Recommended documents about ISO 9660 standard are located at:
-http://www.y-adagio.com/public/standards/iso_cdromr/tocont.htm
+http://www.y-adagio.com/
 ftp://ftp.ecma.ch/ecma-st/Ecma-119.pdf
 Quoting from the PDF "This 2nd Edition of Standard ECMA-119 is technically 
 identical with ISO 9660.", so it is a valid and gratis substitute of the

Documentation/filesystems/proc.txt

@@ -73,9 +73,9 @@ contact Bodo  Bauer  at  bb@ricochet.net.  We'll  be happy to add them to this
 document.
 
 The   latest   version    of   this   document   is    available   online   at
-http://skaro.nightcrawler.com/~bb/Docs/Proc as HTML version.
+http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
 
-If  the above  direction does  not works  for you,  ypu could  try the  kernel
+If  the above  direction does  not works  for you,  you could  try the  kernel
 mailing  list  at  linux-kernel@vger.kernel.org  and/or try  to  reach  me  at
 comandante@zaralinux.com.
 

Documentation/filesystems/vfat.txt

@@ -165,7 +165,8 @@ TEST SUITE
 If you plan to make any modifications to the vfat filesystem, please
 get the test suite that comes with the vfat distribution at
 
-  http://bmrc.berkeley.edu/people/chaffee/vfat.html
+  http://web.archive.org/web/*/http://bmrc.berkeley.edu/
+  people/chaffee/vfat.html
 
 This tests quite a few parts of the vfat filesystem and additional
 tests for new features or untested features would be appreciated.

Documentation/hwmon/adm1026

@@ -6,7 +6,7 @@ Supported chips:
     Prefix: 'adm1026'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: Publicly available at the Analog Devices website
-               http://www.analog.com/en/prod/0,,766_825_ADM1026,00.html
+               http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026
 
 Authors:
         Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing

Documentation/hwmon/g760a

@@ -5,7 +5,7 @@ Supported chips:
   * Global Mixed-mode Technology Inc. G760A
     Prefix: 'g760a'
     Datasheet: Publicly available at the GMT website
-      http://www.gmt.com.tw/datasheet/g760a.pdf
+      http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
 
 Author: Herbert Valerio Riedel <hvr@gnu.org>
 

Documentation/hwmon/gl518sm

@@ -5,11 +5,10 @@ Supported chips:
   * Genesys Logic GL518SM release 0x00
     Prefix: 'gl518sm'
     Addresses scanned: I2C 0x2c and 0x2d
-    Datasheet: http://www.genesyslogic.com/pdf
   * Genesys Logic GL518SM release 0x80
     Prefix: 'gl518sm'
     Addresses scanned: I2C 0x2c and 0x2d
-    Datasheet: http://www.genesyslogic.com/pdf
+    Datasheet: http://www.genesyslogic.com/
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,

Documentation/hwmon/k8temp

@@ -5,7 +5,7 @@ Supported chips:
   * AMD Athlon64/FX or Opteron CPUs
     Prefix: 'k8temp'
     Addresses scanned: PCI space
-    Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+    Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf
 
 Author: Rudolf Marek
 Contact: Rudolf Marek <r.marek@assembler.cz>

Documentation/hwmon/lm85

@@ -9,15 +9,15 @@ Supported chips:
   * Analog Devices ADM1027
     Prefix: 'adm1027'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
-    Datasheet: http://www.analog.com/en/prod/0,,766_825_ADM1027,00.html
+    Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADM1027
   * Analog Devices ADT7463
     Prefix: 'adt7463'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
-    Datasheet: http://www.analog.com/en/prod/0,,766_825_ADT7463,00.html
+    Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463
   * SMSC EMC6D100, SMSC EMC6D101
     Prefix: 'emc6d100'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
-    Datasheet: http://www.smsc.com/main/tools/discontinued/6d100.pdf
+    Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf 
   * SMSC EMC6D102
     Prefix: 'emc6d102'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e

Documentation/hwmon/smsc47m1

@@ -7,13 +7,10 @@ Supported chips:
     Addresses scanned: none, address read from Super I/O config space
     Prefix: 'smsc47m1'
     Datasheets:
-        http://www.smsc.com/main/datasheets/47b27x.pdf
-        http://www.smsc.com/main/datasheets/47m10x.pdf
-        http://www.smsc.com/main/datasheets/47m112.pdf
-        http://www.smsc.com/main/tools/discontinued/47m13x.pdf
-        http://www.smsc.com/main/datasheets/47m14x.pdf
-        http://www.smsc.com/main/tools/discontinued/47m15x.pdf
-        http://www.smsc.com/main/datasheets/47m192.pdf
+        http://www.smsc.com/media/Downloads_Public/Data_Sheets/47b272.pdf
+        http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m10x.pdf
+        http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m112.pdf
+        http://www.smsc.com/
   * SMSC LPC47M292
     Addresses scanned: none, address read from Super I/O config space
     Prefix: 'smsc47m2'

Documentation/hwmon/thmc50

@@ -9,7 +9,7 @@ Supported chips:
   * Texas Instruments THMC50
     Prefix: 'thmc50'
     Addresses scanned: I2C 0x2c - 0x2e
-    Datasheet: http://focus.ti.com/docs/prod/folders/print/thmc50.html
+    Datasheet: http://www.ti.com/ 
 
 Author: Krzysztof Helt <krzysztof.h1@wp.pl>
 

Documentation/hwmon/via686a

@@ -5,7 +5,7 @@ Supported chips:
   * Via VT82C686A, VT82C686B  Southbridge Integrated Hardware Monitor
     Prefix: 'via686a'
     Addresses scanned: ISA in PCI-space encoded address
-    Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/)
+    Datasheet: On request through web form (http://www.via.com.tw/en/resources/download-center/)
 
 Authors:
         Kyösti Mälkki <kmalkki@cc.hut.fi>,

Documentation/hwmon/w83627hf

@@ -5,23 +5,19 @@ Supported chips:
   * Winbond W83627HF (ISA accesses ONLY)
     Prefix: 'w83627hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
   * Winbond W83627THF
     Prefix: 'w83627thf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
   * Winbond W83697HF
     Prefix: 'w83697hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/697hf.pdf
   * Winbond W83637HF
     Prefix: 'w83637hf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
   * Winbond W83687THF
     Prefix: 'w83687thf'
     Addresses scanned: ISA address retrieved from Super I/O registers
-    Datasheet: Provided by Winbond on request
+    Datasheet: Provided by Winbond on request(http://www.winbond.com/hq/enu)
 
 Authors:
         Frodo Looijaard <frodol@dds.nl>,

Documentation/hwmon/w83781d

@@ -9,7 +9,7 @@ Supported chips:
   * Winbond W83782D
     Prefix: 'w83782d'
     Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
-    Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
+    Datasheet: http://www.winbond.com
   * Winbond W83783S
     Prefix: 'w83783s'
     Addresses scanned: I2C 0x2d

Documentation/hwmon/w83792d

@@ -5,7 +5,7 @@ Supported chips:
   * Winbond W83792D
     Prefix: 'w83792d'
     Addresses scanned: I2C 0x2c - 0x2f
-    Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/PDFresult.asp?Pname=1035
+    Datasheet: http://www.winbond.com.tw
 
 Author: Chunhao Huang
 Contact: DZShen <DZShen@Winbond.com.tw>

Documentation/i2c/busses/i2c-ali1535

@@ -3,7 +3,7 @@ Kernel driver i2c-ali1535
 Supported adapters:
   * Acer Labs, Inc. ALI 1535 (south bridge)
     Datasheet: Now under NDA
-	http://www.ali.com.tw/eng/support/datasheet_request.php
+	http://www.ali.com.tw/
 
 Authors:
 	Frodo Looijaard <frodol@dds.nl>,

Documentation/i2c/busses/i2c-ali1563

@@ -3,7 +3,7 @@ Kernel driver i2c-ali1563
 Supported adapters:
   * Acer Labs, Inc. ALI 1563 (south bridge)
     Datasheet: Now under NDA
-	http://www.ali.com.tw/eng/support/datasheet_request.php
+	http://www.ali.com.tw/
 
 Author: Patrick Mochel <mochel@digitalimplant.org>
 

Documentation/i2c/busses/i2c-ali15x3

@@ -3,7 +3,7 @@ Kernel driver i2c-ali15x3
 Supported adapters:
   * Acer Labs, Inc. ALI 1533 and 1543C (south bridge)
     Datasheet: Now under NDA
-	http://www.ali.com.tw/eng/support/datasheet_request.php
+	http://www.ali.com.tw/
 
 Authors:
 	Frodo Looijaard <frodol@dds.nl>,

Documentation/i2c/busses/i2c-piix4

@@ -97,4 +97,4 @@ of all affected systems, so the only safe solution was to prevent access to
 the SMBus on all IBM systems (detected using DMI data.)
 
 For additional information, read:
-http://www.lm-sensors.org/browser/lm-sensors/trunk/README.thinkpad
+http://www.lm-sensors.org/browser/lm-sensors/trunk/README

Documentation/i2c/busses/i2c-sis630

@@ -2,7 +2,7 @@ Kernel driver i2c-sis630
 
 Supported adapters:
   * Silicon Integrated Systems Corp (SiS)
-	630 chipset (Datasheet: available at http://amalysh.bei.t-online.de/docs/SIS/)
+	630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux)
 	730 chipset
   * Possible other SiS chipsets ?
 

Documentation/ia64/aliasing.txt

@@ -168,8 +168,6 @@ PAST PROBLEM CASES
 
     mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
 
-      See https://bugzilla.novell.com/show_bug.cgi?id=140858.
-
       The EFI memory map reports the following attributes:
         0x00000-0x9FFFF WB only
         0xA0000-0xBFFFF UC only (VGA frame buffer)

Documentation/ia64/serial.txt

@@ -133,7 +133,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
 
 
 
-[1] http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+[1] http://www.dig64.org/specifications/agreement 
     The table was originally defined as the "HCDP" for "Headless
     Console/Debug Port."  The current version is the "PCDP" for
     "Primary Console and Debug Port Devices."

Documentation/infiniband/user_verbs.txt

@@ -5,7 +5,7 @@ USERSPACE VERBS ACCESS
   described in chapter 11 of the InfiniBand Architecture Specification.
 
   To use the verbs, the libibverbs library, available from
-  <http://openib.org/>, is required.  libibverbs contains a
+  http://www.openfabrics.org/, is required.  libibverbs contains a
   device-independent API for using the ib_uverbs interface.
   libibverbs also requires appropriate device-dependent kernel and
   userspace driver for your InfiniBand hardware.  For example, to use

Documentation/input/appletouch.txt

@@ -82,4 +82,4 @@ Links:
 ------
 
 [1]: http://johannes.sipsolutions.net/PowerBook/touchpad/
-[2]: http://web.telia.com/~u89404340/touchpad/index.html
+[2]: http://web.archive.org/web/*/http://web.telia.com/~u89404340/touchpad/index.html

Documentation/input/bcm5974.txt

@@ -62,4 +62,4 @@ Links
 -----
 
 [1] http://ubuntuforums.org/showthread.php?t=840040
-[2] http://http://bitmath.org/code/
+[2] http://bitmath.org/code/

Documentation/input/iforce-protocol.txt

@@ -251,7 +251,7 @@ Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy.
 
 ** Author of this document **
 Johann Deneux <johann.deneux@gmail.com>
-Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/
+Home page at http://web.archive.org/web/*/http://www.esil.univ-mrs.fr
 
 Additions by Vojtech Pavlik.
 

Documentation/input/sentelic.txt

@@ -341,7 +341,7 @@ Byte 5~8: Don't care (Absolute packet)
 FSP supports basic PS/2 commanding set and modes, refer to following URL for
 details about PS/2 commands:
 
-http://www.computer-engineering.org/index.php?title=PS/2_Mouse_Interface
+http://www.computer-engineering.org/ps2mouse/
 
 ==============================================================================
 * Programming Sequence for Determining Packet Parsing Flow

Documentation/input/xpad.txt

@@ -150,7 +150,7 @@ the basic functionality.
 
 1. http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
 2. http://xpad.xbox-scene.com/
-3. http://www.xboxhackz.com/Hackz-Reference.htm
+3. http://www.markosweb.com/www/xboxhackz.com/ 
 
 4. /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany):
 

Documentation/intel_txt.txt

@@ -25,20 +25,18 @@ which has been updated for the new released platforms.
 Intel TXT has been presented at various events over the past few
 years, some of which are:
       LinuxTAG 2008:
-          http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag/
-          details.html?talkid=110
+          http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag.html
       TRUST2008:
-          http://www.trust2008.eu/downloads/Keynote-Speakers/
+          http://www.trust-conference.eu/downloads/Keynote-Speakers/
           3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
-      IDF 2008, Shanghai:
-          http://inteldeveloperforum.com.edgesuite.net/shanghai_2008/
-          aep/PROS003/index.html
+      IDF, Shanghai:
+          http://www.prcidf.com.cn/index_en.html
       IDFs 2006, 2007 (I'm not sure if/where they are online)
 
 Trusted Boot Project Overview:
 =============================
 
-Trusted Boot (tboot) is an open source, pre- kernel/VMM module that
+Trusted Boot (tboot) is an open source, pre-kernel/VMM module that
 uses Intel TXT to perform a measured and verified launch of an OS
 kernel/VMM.
 

Documentation/ioctl/ioctl-number.txt

@@ -74,7 +74,7 @@ Code  Seq#(hex)	Include File		Comments
 0x10	00-0F	drivers/char/s390/vmcp.h
 0x12	all	linux/fs.h
 		linux/blkpg.h
-0x1b	all	InfiniBand Subsystem	<http://www.openib.org/>
+0x1b	all	InfiniBand Subsystem	<http://infiniband.sourceforge.net/>
 0x20	all	drivers/cdrom/cm206.h
 0x22	all	scsi/sg.h
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
@@ -190,7 +190,7 @@ Code  Seq#(hex)	Include File		Comments
 '['	00-07	linux/usb/tmc.h		USB Test and Measurement Devices
 					<mailto:gregkh@suse.de>
 'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
-					<http://lrcwww.epfl.ch/linux-atm/magic.html>
+					<http://lrcwww.epfl.ch/>
 'b'	00-FF				conflict! bit3 vme host bridge
 					<mailto:natalia@nikhefk.nikhef.nl>
 'b'	00-0F	media/bt819.h		conflict!
@@ -225,7 +225,7 @@ Code  Seq#(hex)	Include File		Comments
 'k'	00-0F	linux/spi/spidev.h	conflict!
 'k'	00-05	video/kyro.h		conflict!
 'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
-					<http://mikonos.dia.unisa.it/tcfs>
+					<http://web.archive.org/web/*/http://mikonos.dia.unisa.it/tcfs>
 'l'	40-7F	linux/udf_fs_i.h	in development:
 					<http://sourceforge.net/projects/linux-udf/>
 'm'	00-09	linux/mmtimer.h		conflict!
@@ -252,7 +252,7 @@ Code  Seq#(hex)	Include File		Comments
 					<mailto:giometti@linux.it>
 'q'	00-1F	linux/serio.h
 'q'	80-FF	linux/telephony.h	Internet PhoneJACK, Internet LineJACK
-		linux/ixjuser.h		<http://www.quicknet.net>
+		linux/ixjuser.h		<http://web.archive.org/web/*/http://www.quicknet.net>
 'r'	00-1F	linux/msdos_fs.h and fs/fat/dir.c
 's'	all	linux/cdk.h
 't'	00-7F	linux/if_ppp.h
@@ -286,7 +286,7 @@ Code  Seq#(hex)	Include File		Comments
 0x89	F0-FF	linux/sockios.h		SIOCDEVPRIVATE range
 0x8B	all	linux/wireless.h
 0x8C	00-3F				WiNRADiO driver
-					<http://www.proximity.com.au/~brian/winradio/>
+					<http://www.winradio.com.au/>
 0x90	00	drivers/cdrom/sbpcd.h
 0x92	00-0F	drivers/usb/mon/mon_bin.c
 0x93	60-7F	linux/auto_fs.h

Documentation/isdn/README

@@ -36,7 +36,7 @@ README for the ISDN-subsystem
      http://www.mhessler.de/i4lfaq/
   It can be viewed online, or downloaded in sgml/text/html format.
   The FAQ can also be viewed online at
-     http://www.isdn4inux.de/faq/
+     http://www.isdn4linux.de/faq/
   or downloaded from
      ftp://ftp.isdn4linux.de/pub/isdn4linux/FAQ/
 

Documentation/isdn/README.HiSax

@@ -486,7 +486,7 @@ Appendix: Teles PCMCIA driver
 -----------------------------
 
 See
-   http://www.stud.uni-wuppertal.de/~ea0141/pcmcia.html
+   http://www.linux.no/teles_cs.txt 
 for instructions.
 
 Appendix: Linux and ISDN-leased lines

Documentation/ja_JP/HOWTO

@@ -223,7 +223,7 @@ web サイトには、コードの構成、サブシステム、現在存在す
 あなたがどこからスタートして良いかわからないが、Linux カーネル開発コミュ
 ニティに参加して何かすることをさがしている場合には、Linux kernel
 Janitor's プロジェクトにいけば良いでしょう -
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 ここはそのようなスタートをするのにうってつけの場所です。ここには、
 Linux カーネルソースツリーの中に含まれる、きれいにし、修正しなければな
 らない、単純な問題のリストが記述されています。このプロジェクトに関わる

Documentation/ja_JP/SubmittingPatches

@@ -97,7 +97,7 @@ Quilt:
 http://savannah.nongnu.org/projects/quilt
 
 Andrew Morton's patch scripts:
-http://www.zip.com.au/~akpm/linux/patches/
+http://userweb.kernel.org/~akpm/stuff/tpp.txt
 このリンクの先のスクリプトの代わりとして、quilt がパッチマネジメント
 ツールとして推奨されています(上のリンクを見てください)。
 
@@ -210,7 +210,7 @@ VGER.KERNEL.ORG でホスティングされているメーリングリストの
  ・移植性のないコードから移植性のあるコードへの置き換え(小さい範囲で
    あればアーキテクチャ特有のことでも他の人がコピーできます)
  ・作者やメンテナによる修正(すなわち patch monkey の再転送モード)
-URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+EMAIL: <trivial@kernel.org>
 
 7) MIME やリンクや圧縮ファイルや添付ファイルではなくプレインテキストのみ
 
@@ -534,7 +534,7 @@ gcc においては、マクロと同じくらい軽いです。
 ----------------------
 
 Andrew Morton, "The perfect patch" (tpp).
-  <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+  <http://userweb.kernel.org/~akpm/stuff/tpp.txt>
 
 Jeff Garzik, "Linux kernel patch submission format".
   <http://linux.yyz.us/patch-format.html>

Documentation/kernel-docs.txt

@@ -75,7 +75,7 @@
 
      * Title: "Conceptual Architecture of the Linux Kernel"
        Author: Ivan T. Bowman.
-       URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a1.html
+       URL: http://plg.uwaterloo.ca/
        Keywords: conceptual software architecture, extracted design,
        reverse engineering, system structure.
        Description: Conceptual software architecture of the Linux kernel,
@@ -84,7 +84,7 @@
 
      * Title: "Concrete Architecture of the Linux Kernel"
        Author: Ivan T. Bowman, Saheem Siddiqi, and Meyer C. Tanuan.
-       URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a2.html
+       URL: http://plg.uwaterloo.ca/
        Keywords: concrete architecture, extracted design, reverse
        engineering, system structure, dependencies.
        Description: Concrete architecture of the Linux kernel,
@@ -95,7 +95,7 @@
      * Title: "Linux as a Case Study: Its Extracted Software
        Architecture"
        Author: Ivan T. Bowman, Richard C. Holt and Neil V. Brewster.
-       URL: http://plg.uwaterloo.ca/~itbowman/papers/linuxcase.html
+       URL: http://plg.uwaterloo.ca/
        Keywords: software architecture, architecture recovery,
        redocumentation.
        Description: Paper appeared at ICSE'99, Los Angeles, May 16-22,
@@ -104,7 +104,7 @@
 
      * Title: "Overview of the Virtual File System"
        Author: Richard Gooch.
-       URL: http://www.atnf.csiro.au/~rgooch/linux/vfs.txt
+       URL: http://www.mjmwired.net/kernel/Documentation/filesystems/vfs.txt
        Keywords: VFS, File System, mounting filesystems, opening files,
        dentries, dcache.
        Description: Brief introduction to the Linux Virtual File System.
@@ -267,15 +267,13 @@
      * Title: "Kernel API changes from 2.0 to 2.2"
        Author: Richard Gooch.
        URL:
-       http://www.atnf.csiro.au/~rgooch/linux/docs/porting-to-2.2.html
+       http://www.linuxhq.com/guides/LKMPG/node28.html 
        Keywords: 2.2, changes.
        Description: Kernel functions/structures/variables which changed
        from 2.0.x to 2.2.x.
 
      * Title: "Kernel API changes from 2.2 to 2.4"
        Author: Richard Gooch.
-       URL:
-       http://www.atnf.csiro.au/~rgooch/linux/docs/porting-to-2.4.html
        Keywords: 2.4, changes.
        Description: Kernel functions/structures/variables which changed
        from 2.2.x to 2.4.x.
@@ -290,7 +288,6 @@
        
      * Title: "I/O Event Handling Under Linux"
        Author: Richard Gooch.
-       URL: http://www.atnf.csiro.au/~rgooch/linux/docs/io-events.html
        Keywords: IO, I/O, select(2), poll(2), FDs, aio_read(2), readiness
        event queues.
        Description: From the Introduction: "I/O Event handling is about
@@ -386,64 +383,64 @@
 
      * Title: "Porting Device Drivers To Linux 2.2: part II"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-06/gear_01.html
+       URL: http://www.linux-mag.com/id/238 
        Keywords: ports, porting.
        Description: Second part on porting from 2.0 to 2.2 kernels.
 
      * Title: "How To Make Sure Your Driver Will Work On The Power
        Macintosh"
        Author: Paul Mackerras.
-       URL: http://www.linux-mag.com/1999-07/gear_01.html
+       URL: http://www.linux-mag.com/id/261
        Keywords: Mac, Power Macintosh, porting, drivers, compatibility.
        Description: The title says it all.
 
      * Title: "An Introduction to SCSI Drivers"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-08/gear_01.html
+       URL: http://www.linux-mag.com/id/284
        Keywords: SCSI, device, driver.
        Description: The title says it all.
 
      * Title: "Advanced SCSI Drivers And Other Tales"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-09/gear_01.html
+       URL: http://www.linux-mag.com/id/307
        Keywords: SCSI, device, driver, advanced.
        Description: The title says it all.
 
      * Title: "Writing Linux Mouse Drivers"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-10/gear_01.html
+       URL: http://www.linux-mag.com/id/330
        Keywords: mouse, driver, gpm.
        Description: The title says it all.
 
      * Title: "More on Mouse Drivers"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-11/gear_01.html
+       URL: http://www.linux-mag.com/id/356
        Keywords: mouse, driver, gpm, races, asynchronous I/O.
        Description: The title still says it all.
 
      * Title: "Writing Video4linux Radio Driver"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/1999-12/gear_01.html
+       URL: http://www.linux-mag.com/id/381
        Keywords: video4linux, driver, radio, radio devices.
        Description: The title says it all.
 
      * Title: "Video4linux Drivers, Part 1: Video-Capture Device"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/2000-01/gear_01.html
+       URL: http://www.linux-mag.com/id/406
        Keywords: video4linux, driver, video capture, capture devices,
        camera driver.
        Description: The title says it all.
 
      * Title: "Video4linux Drivers, Part 2: Video-capture Devices"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/2000-02/gear_01.html
+       URL: http://www.linux-mag.com/id/429
        Keywords: video4linux, driver, video capture, capture devices,
        camera driver, control, query capabilities, capability, facility.
        Description: The title says it all.
 
      * Title: "PCI Management in Linux 2.2"
        Author: Alan Cox.
-       URL: http://www.linux-mag.com/2000-03/gear_01.html
+       URL: http://www.linux-mag.com/id/452
        Keywords: PCI, bus, bus-mastering.
        Description: The title says it all.
 
@@ -502,7 +499,7 @@
        
      * Title: "A Linux vm README"
        Author: Kanoj Sarcar.
-       URL: http://reality.sgi.com/kanoj_engr/vm229.html
+       URL: http://kos.enix.org/pub/linux-vmm.html
        Keywords: virtual memory, mm, pgd, vma, page, page flags, page
        cache, swap cache, kswapd.
        Description: Telegraphic, short descriptions and definitions
@@ -659,7 +656,7 @@
 
      * Name: "Linux Kernel Source Reference"
        Author: Thomas Graichen.
-       URL: http://innominate.org/~graichen/projects/lksr/
+       URL: http://marc.info/?l=linux-kernel&m=96446640102205&w=4
        Keywords: CVS, web, cvsweb, browsing source code.
        Description: Web interface to a CVS server with the kernel
        sources. "Here you can have a look at any file of the Linux kernel
@@ -682,7 +679,7 @@
        produced during the week. Published every Thursday.
 
      * Name: "Kernel Traffic"
-       URL: http://kt.zork.net/kernel-traffic/
+       URL: http://kt.earth.li/kernel-traffic/index.html
        Keywords: linux-kernel mailing list, weekly kernel news.
        Description: Weekly newsletter covering the most relevant
        discussions of the linux-kernel mailing list.

Documentation/ko_KR/HOWTO

@@ -122,7 +122,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
 
     올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다.
     "The Perfect Patch"
-        http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+        http://userweb.kernel.org/~akpm/stuff/tpp.txt
     "Linux kernel patch submission format"
         http://linux.yyz.us/patch-format.html
 
@@ -192,7 +192,7 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H
 
 여러분이 어디서 시작해야 할진 모르지만 커널 개발 커뮤니티에 참여할 수
 있는 일들을 찾길 원한다면 리눅스 커널 Janitor 프로젝트를 살펴봐라.
-         http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 그곳은 시작하기에 훌륭한 장소이다. 그곳은 리눅스 커널 소스 트리내에
 간단히 정리되고 수정될 수 있는 문제들에 관하여 설명한다. 여러분은 이
 프로젝트를 대표하는 개발자들과 일하면서 자신의 패치를 리눅스 커널 트리에
@@ -596,7 +596,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅
 
 이것이 무엇인지 더 자세한 것을 알고 싶다면 다음 문서의 ChageLog 항을 봐라.
    "The Perfect Patch"
-    http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+    http://userweb.kernel.org/~akpm/stuff/tpp.txt
 
 
 
@@ -610,7 +610,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅
 
 
 ----------
-"개발 프로세스"(http://linux.tar.gz/articles/2.6-development_process) 섹션을
+"개발 프로세스"(http://lwn.net/Articles/94386/) 섹션을
 작성하는데 있어 참고할 문서를 사용하도록 허락해준 Paolo Ciarrocchi에게
 감사한다. 여러분들이 말해야 할 것과 말해서는 안되는 것의 목록 중 일부를 제공해준
 Randy Dunlap과 Gerrit Huizenga에게 감사한다. 또한 검토와 의견 그리고

Documentation/laptops/acer-wmi.txt

@@ -173,7 +173,7 @@ Credits
 *******
 
 Olaf Tauber, who did the real hard work when he developed acerhk
-http://www.informatik.hu-berlin.de/~tauber/acerhk
+http://www.cakey.de/acerhk/
 All the authors of laptop ACPI modules in the kernel, whose work
 was an inspiration in the early days of acer_acpi
 Mathieu Segaud, who solved the problem with having to modprobe the driver

Documentation/ldm.txt

@@ -98,7 +98,7 @@ More Documentation
 There is an Overview of the LDM together with complete Technical Documentation.
 It is available for download.
 
-  http://www.linux-ntfs.org/content/view/19/37/
+  http://www.linux-ntfs.org/
 
 If you have any LDM questions that aren't answered in the documentation, email
 me.

Documentation/md.txt

 Tools that manage md devices can be found at
-   http://www.<country>.kernel.org/pub/linux/utils/raid/....
+   http://www.kernel.org/pub/linux/utils/raid/ 
 
 
 Boot time assembly of RAID arrays

Documentation/misc-devices/c2port.txt

@@ -32,10 +32,10 @@ The C2 Interface main references are at (http://www.silabs.com)
 Silicon Laboratories site], see:
 
 - AN127: FLASH Programming via the C2 Interface at
-http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and
+http://www.silabs.com/Support Documents/TechnicalDocs/an127.pdf 
 
 - C2 Specification at
-http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf,
+http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/an127.pdf&src=SearchResults
 
 however it implements a two wire serial communication protocol (bit
 banging) designed to enable in-system programming, debugging, and

Documentation/mtd/nand_ecc.txt

@@ -91,7 +91,7 @@ ECC 1   rp15  rp14  rp13  rp12  rp11  rp10  rp09  rp08
 ECC 2   cp5   cp4   cp3   cp2   cp1   cp0      1     1
 
 I detected after writing this that ST application note AN1823
-(http://www.st.com/stonline/books/pdf/docs/10123.pdf) gives a much
+(http://www.st.com/stonline/) gives a much
 nicer picture.(but they use line parity as term where I use row parity)
 Oh well, I'm graphically challenged, so suffer with me for a moment :-)
 And I could not reuse the ST picture anyway for copyright reasons.

Documentation/networking/3c509.txt

@@ -31,7 +31,7 @@ models:
 Large portions of this documentation were heavily borrowed from the guide
 written the original author of the 3c509 driver, Donald Becker. The master
 copy of that document, which contains notes on older versions of the driver,
-currently resides on Scyld web server: http://www.scyld.com/network/3c509.html.
+currently resides on Scyld web server: http://www.scyld.com/.
 
 
 (1) Special Driver Features

Documentation/networking/README.ipw2100

@@ -72,8 +72,7 @@ such, if you are interested in deploying or shipping a driver as part of
 solution intended to be used for purposes other than development, please
 obtain a tested driver from Intel Customer Support at:
 
-http://support.intel.com/support/notebook/sb/CS-006408.htm
-
+http://www.intel.com/support/wireless/sb/CS-006408.htm
 
 1. Introduction
 -----------------------------------------------

Documentation/networking/README.ipw2200

@@ -85,7 +85,7 @@ such, if you are interested in deploying or shipping a driver as part of
 solution intended to be used for purposes other than development, please 
 obtain a tested driver from Intel Customer Support at:
 
-http://support.intel.com/support/notebook/sb/CS-006408.htm
+http://support.intel.com
 
 
 1.   Introduction

Documentation/networking/README.sb1000

@@ -27,8 +27,8 @@ cable modem easy.
    in Franco's original source code distribution .tar.gz file.  Support for
    the sb1000 driver can be found at:
 
-      http://home.adelphia.net/~siglercm/sb1000.html
-      http://linuxpower.cx/~cable/
+      http://web.archive.org/web/*/http://home.adelphia.net/~siglercm/sb1000.html
+      http://web.archive.org/web/*/http://linuxpower.cx/~cable/
 
    along with these utilities.
 

Documentation/networking/arcnet.txt

@@ -68,7 +68,7 @@ REAL NAME" to listserv@tichy.ch.uj.edu.pl.  Then, to submit messages to the
 list, mail to linux-arcnet@tichy.ch.uj.edu.pl.
 
 There are archives of the mailing list at:
-	http://tichy.ch.uj.edu.pl/lists/linux-arcnet
+	http://epistolary.org/mailman/listinfo.cgi/arcnet
 
 The people on linux-net@vger.kernel.org have also been known to be very
 helpful, especially when we're talking about ALPHA Linux kernels that may or
@@ -79,7 +79,7 @@ Other Drivers and Info
 ----------------------
 
 You can try my ARCNET page on the World Wide Web at:
-	http://www.worldvisions.ca/~apenwarr/arcnet/
+	http://www.qis.net/~jschmitz/arcnet/	
 
 Also, SMC (one of the companies that makes ARCnet cards) has a WWW site you
 might be interested in, which includes several drivers for various cards

Documentation/networking/bonding.txt

@@ -2432,7 +2432,7 @@ be found at:
 https://lists.sourceforge.net/lists/listinfo/bonding-devel
 
 Donald Becker's Ethernet Drivers and diag programs may be found at :
- - http://www.scyld.com/network/
+ - http://web.archive.org/web/*/http://www.scyld.com/network/ 
 
 You will also find a lot of information regarding Ethernet, NWay, MII,
 etc. at www.scyld.com.

Documentation/networking/decnet.txt

@@ -4,7 +4,7 @@
 1) Other documentation....
 
    o Project Home Pages
-       http://www.chygwyn.com/DECnet/                      - Kernel info
+       http://www.chygwyn.com/                      	    - Kernel info
        http://linux-decnet.sourceforge.net/                - Userland tools
        http://www.sourceforge.net/projects/linux-decnet/   - Status page
 

Documentation/networking/fore200e.txt

@@ -39,7 +39,7 @@ version. Alternative binary firmware images can be found somewhere on the
 ForeThought CD-ROM supplied with your adapter by FORE Systems.
 
 You can also get the latest firmware images from FORE Systems at
-http://www.fore.com. Register TACTics Online and go to
+http://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
 the 'software updates' pages. The firmware binaries are part of
 the various ForeThought software distributions.
 

Documentation/networking/ipddp.txt

@@ -36,11 +36,6 @@ AppleTalk-IP to IP decapsulation.
 Basic instructions for user space tools
 =======================================
 
-To enable AppleTalk-IP decapsulation/encapsulation you will need the 
-proper tools. You can get the tools for decapsulation from
-http://spacs1.spacs.k12.wi.us/~jschlst/index.html and for encapsulation
-from http://www.maths.unm.edu/~bradford/ltpc.html
-
 I will briefly describe the operation of the tools, but you will
 need to consult the supporting documentation for each set of tools.
 

Documentation/networking/iphase.txt

@@ -22,7 +22,7 @@ The features and limitations of this driver are as follows:
     - All variants of Interphase ATM PCI (i)Chip adapter cards are supported, 
       including x575 (OC3, control memory 128K , 512K and packet memory 128K, 
       512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See 
-      http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0
+      http://www.iphase.com/
       for details.
     - Only x86 platforms are supported.
     - SMP is supported.

Documentation/networking/packet_mmap.txt

@@ -8,7 +8,7 @@ capture network traffic with utilities like tcpdump or any other that needs
 raw access to network interface.
 
 You can find the latest version of this document at:
-    http://pusa.uv.es/~ulisses/packet_mmap/
+    http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap
 
 Howto can be found at:
     http://wiki.gnu-log.net (packet_mmap)
@@ -56,7 +56,7 @@ support for PACKET_MMAP, and also probably the libpcap included in your distribu
 
 I'm aware of two implementations of PACKET_MMAP in libpcap:
 
-    http://pusa.uv.es/~ulisses/packet_mmap/  (by Simon Patarin, based on libpcap 0.6.2)
+    http://wiki.ipxwarzone.com/		     (by Simon Patarin, based on libpcap 0.6.2)
     http://public.lanl.gov/cpw/              (by Phil Wood, based on lastest libpcap)
 
 The rest of this document is intended for people who want to understand

Documentation/networking/ray_cs.txt

@@ -13,8 +13,8 @@ wireless LAN cards.
 
 As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
 source.  My web page for the development of ray_cs is at
-http://world.std.com/~corey/raylink.html and I can be emailed at
-corey@world.std.com
+http://web.ralinktech.com/ralink/Home/Support/Linux.html 
+and I can be emailed at corey@world.std.com
 
 The kernel driver is based on ray_cs-1.62.tgz
 

Documentation/networking/s2io.txt

@@ -133,7 +133,8 @@ bring down CPU utilization.
 ** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are 
 recommended as safe parameters.
 For more information, please review the AMD8131 errata at
-http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf
+http://vip.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/
+26310_AMD-8131_HyperTransport_PCI-X_Tunnel_Revision_Guide_rev_3_18.pdf
 
 6.  Available Downloads
 Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up 

Documentation/networking/tlan.txt

@@ -2,7 +2,7 @@
 (C) 1998 James Banks
 (C) 1999-2001 Torben Mathiasen <tmm@image.dk, torben.mathiasen@compaq.com>
 
-For driver information/updates visit http://opensource.compaq.com
+For driver information/updates visit http://www.compaq.com
 
 
 TLAN driver for Linux, version 1.14a
@@ -113,5 +113,5 @@ III.  Things to try if you have problems.
 
 There is also a tlan mailing list which you can join by sending "subscribe tlan"
 in the body of an email to majordomo@vuser.vu.union.edu.
-There is also a tlan website at http://opensource.compaq.com
+There is also a tlan website at http://www.compaq.com
 

Documentation/networking/udplite.txt

@@ -11,11 +11,13 @@
   This file briefly describes the existing kernel support and the socket API.
   For in-depth information, you can consult:
 
-   o The UDP-Lite Homepage: http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
+   o The UDP-Lite Homepage:
+	http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/ 
        From here you can also download some example application source code.
 
    o The UDP-Lite HOWTO on
-       http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/UDP-Lite-HOWTO.txt
+       http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
+	files/UDP-Lite-HOWTO.txt
 
    o The Wireshark UDP-Lite WiKi (with capture files):
        http://wiki.wireshark.org/Lightweight_User_Datagram_Protocol
@@ -26,12 +28,7 @@
   I) APPLICATIONS
 
   Several applications have been ported successfully to UDP-Lite. Ethereal
-  (now called wireshark) has UDP-Litev4/v6 support by default. The tarball on
-
-   http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/udplite_linux.tar.gz
-
-  has source code for several v4/v6 client-server and network testing examples.
-
+  (now called wireshark) has UDP-Litev4/v6 support by default. 
   Porting applications to UDP-Lite is straightforward: only socket level and
   IPPROTO need to be changed; senders additionally set the checksum coverage
   length (default = header length = 8). Details are in the next section.

Documentation/networking/wavelan.txt

@@ -50,7 +50,8 @@ and a Lucent Modem, and NOT 802.11 compatible.
 -----------------
 	o Config :	Not yet in kernel
 	o Location :	Pcmcia package 3.1.10+
-	o on-line doc :	http://www.fasta.fh-dortmund.de/users/andy/wvlan/
+	o on-line doc :
+	http://web.archive.org/web/*/http://www.fasta.fh-dortmund.de/users/andy/wvlan/	
 
 	This is the driver for the current generation of Wavelan IEEE,
 which is 802.11 compatible. Depending on version, it is 2 Mb/s or 11

Documentation/power/apm-acpi.txt

@@ -28,5 +28,5 @@ and be sure that they are started sometime in the system boot process.
 Go ahead and start both.  If ACPI or APM is not available on your
 system the associated daemon will exit gracefully.
 
-  apmd:   http://worldvisions.ca/~apenwarr/apmd/
+  apmd:   http://ftp.debian.org/pool/main/a/apmd/
   acpid:  http://acpid.sf.net/

Documentation/power/basic-pm-debugging.txt

@@ -179,8 +179,7 @@ use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
 
 To verify that the STR works, it is generally more convenient to use the s2ram
 tool available from http://suspend.sf.net and documented at
-http://en.opensuse.org/s2ram .  However, before doing that it is recommended to
-carry out STR testing using the facility described in section 1.
+http://en.opensuse.org/SDB:Suspend_to_RAM.
 
 Namely, after writing "freezer", "devices", "platform", "processors", or "core"
 into /sys/power/pm_test (available if the kernel is compiled with

Documentation/power/video.txt

@@ -67,11 +67,11 @@ There are a few types of systems where video works after S3 resume:
   POSTing bios works. Ole Rohne has patch to do just that at
   http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
 
-(8) on some systems, you can use the video_post utility mentioned here:
-  http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
-  && /usr/sbin/video_post - which will initialize the display in console mode.
-  If  you are in X, you can switch to a virtual terminal and back to X using
-  CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.
+(8) on some systems, you can use the video_post utility and or 
+  do echo 3 > /sys/power/state  && /usr/sbin/video_post - which will 
+  initialize the display in console mode. If you are in X, you can switch
+  to a virtual terminal and back to X using  CTRL+ALT+F1 - CTRL+ALT+F7 to get
+  the display working in graphical mode again.
 
 Now, if you pass acpi_sleep=something, and it does not work with your
 bios, you'll get a hard crash during resume. Be careful. Also it is
@@ -177,7 +177,7 @@ Mainboard	    Graphics card                 hack (or "how to do it")
 Asus A7V8X	    nVidia RIVA TNT2 model 64	  s3_bios,s3_mode (4)
 
 
-(*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
+(*) from https://wiki.ubuntu.com/HoaryPMResults, not sure
     which options to use. If you know, please tell me.
 
 (***) To be tested with a newer kernel.

Documentation/powerpc/booting-without-of.txt

@@ -1048,7 +1048,7 @@ IV - "dtc", the device tree compiler
 
 
 dtc source code can be found at
-<http://ozlabs.org/~dgibson/dtc/dtc.tar.gz>
+<http://git.jdl.com/gitweb/?p=dtc.git>
 
 WARNING: This version is still in early development stage; the
 resulting device-tree "blobs" have not yet been validated with the

Documentation/s390/Debugging390.txt

@@ -2531,5 +2531,5 @@ Special Thanks
 ==============
 Special thanks to Neale Ferguson who maintains a much
 prettier HTML version of this page at
-http://penguinvm.princeton.edu/notes.html#Debug390
+http://linuxvm.org/penguinvm/
 Bob Grainger Stefan Bader & others for reporting bugs

Documentation/scsi/BusLogic.txt

@@ -47,7 +47,7 @@ tune driver performance and error recovery to their particular needs.
 The latest information on Linux support for BusLogic SCSI Host Adapters, as
 well as the most recent release of this driver and the latest firmware for the
 BT-948/958/958D, will always be available from my Linux Home Page at URL
-"http://www.dandelion.com/Linux/".
+"http://sourceforge.net/projects/dandelion/".
 
 Bug reports should be sent via electronic mail to "lnz@dandelion.com".  Please
 include with the bug report the complete configuration messages reported by the

Documentation/scsi/ChangeLog.megaraid

@@ -215,7 +215,7 @@ Older Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
 
 3.	Convert pci_module_init to pci_register_driver
 	Convert from pci_module_init to pci_register_driver
-	(from:http://kerneljanitors.org/TODO)
+	(from:http://kernelnewbies.org/KernelJanitors/TODO)
 		- Signed-off-by: Domen Puncer <domen@coderock.org>
 
 4.	Use the pre defined DMA mask constants from dma-mapping.h

Documentation/scsi/FlashPoint.txt

@@ -13,7 +13,7 @@ operating system support to its BusLogic brand of FlashPoint Ultra SCSI
 host adapters.  All of BusLogic's other SCSI host adapters, including the
 MultiMaster line, currently support the Linux operating system.  Linux
 drivers and information will be available on October 15th at
-http://www.dandelion.com/Linux/.
+http://sourceforge.net/projects/dandelion/.
 
 "Mylex is committed to supporting the Linux community," says Peter Shambora,
 vice president of marketing for Mylex.  "We have supported Linux driver
@@ -27,7 +27,7 @@ Linux is a freely-distributed implementation of UNIX for Intel x86, Sun
 SPARC, SGI MIPS, Motorola 68k, Digital Alpha AXP and Motorola PowerPC
 machines.  It supports a wide range of software, including the X Window
 System, Emacs, and TCP/IP networking.  Further information is available at
-http://www.linux.org and http://www.ssc.com/linux.
+http://www.linux.org and http://www.ssc.com/.
 
 FlashPoint Host Adapters
 

Documentation/scsi/Mylex.txt

@@ -2,4 +2,4 @@ Please see the file README.BusLogic for information about Linux support for
 Mylex (formerly BusLogic) MultiMaster and FlashPoint SCSI Host Adapters.
 
 The Mylex DAC960 PCI RAID Controllers are now supported.  Please consult
-http://www.dandelion.com/Linux/ for further information on the DAC960 driver.
+http://sourceforge.net/projects/dandelion for further information on the DAC960 driver.

Documentation/scsi/NinjaSCSI.txt

@@ -3,8 +3,6 @@
 
 1. Comment
  This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3
-(http://www.workbit.co.jp/ts/z_nj3r.html) and NinjaSCSI-32Bi
-(http://www.workbit.co.jp/ts/z_njsc32bi.html) PCMCIA card driver module
 for Linux.
 
 2. My Linux environment

Documentation/scsi/aic79xx.txt

@@ -447,7 +447,7 @@ The following information is available in this file:
       http://www.adaptec.com/buy-cables/.
 
    Europe
-    - Visit our Web site at http://www.adaptec-europe.com/.
+    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
     - To speak with a Technical Support Specialist, call, or email,
       * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
         http://ask-de.adaptec.com/.

Documentation/scsi/aic7xxx.txt

@@ -344,7 +344,7 @@ The following information is available in this file:
       http://www.adaptec.com/buy-cables/.
 
    Europe
-    - Visit our Web site at http://www.adaptec-europe.com/.
+    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
     - To speak with a Technical Support Specialist, call, or email,
       * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
         http://ask-de.adaptec.com/.

Documentation/scsi/ibmmca.txt

@@ -1109,7 +1109,7 @@
      Q: Where can I find the latest info about this driver?
      A: See the file MAINTAINERS for the current WWW-address, which offers
         updates, info and Q/A lists. At this file's origin, the webaddress
-	was: http://www.uni-mainz.de/~langm000/linux.html
+	was: http://www.staff.uni-mainz.de/mlang/linux.html
      Q: My SCSI-adapter is not recognized by the driver, what can I do?
      A: Just force it to be recognized by kernel parameters. See section 5.1.
         If this really happens, do also send e-mail to the maintainer, as

Documentation/scsi/osst.txt

@@ -135,7 +135,7 @@ The driver development is coordinated through a mailing list
 a CVS repository and some web pages. 
 The tester's pages which contain recent news and updated drivers to download
 can be found on
-http://linux1.onstream.nl/test/
+http://sourceforge.net/projects/osst/
 
 If you find any problems, please have a look at the tester's page in order
 to see whether the problem is already known and solved. Otherwise, please

Documentation/scsi/ppa.txt

 -------- Terse where to get ZIP Drive help info --------
 
 General Iomega ZIP drive page for Linux:
-http://www.torque.net/~campbell/
+http://web.archive.org/web/*/http://www.torque.net/~campbell/
 
 Driver archive for old drivers:
-http://www.torque.net/~campbell/ppa/
+http://web.archive.org/web/*/http://www.torque.net/~campbell/ppa
 
 Linux Parport page (parallel port)
-http://www.torque.net/parport/
+http://web.archive.org/web/*/http://www.torque.net/parport/
 
 Email list for Linux Parport
 linux-parport@torque.net

Documentation/scsi/scsi-generic.txt

@@ -34,11 +34,11 @@ http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO
 This describes the sg version 3 driver found in the lk 2.4 series.
 The LDP renders documents in single and multiple page HTML, postscript
 and pdf. This document can also be found at:
-http://www.torque.net/sg/p/sg_v3_ho.html
+http://sg.danny.cz/sg/p/sg_v3_ho.html
 
 Documentation for the version 2 sg driver found in the lk 2.2 series can
-be found at http://www.torque.net/sg/p/scsi-generic.txt . A larger version
-is at:  http://www.torque.net/sg/p/scsi-generic_long.txt .
+be found at http://sg.danny.cz/sg/. A larger version
+is at: http://sg.danny.cz/sg/p/scsi-generic_long.txt.
 
 The original documentation for the sg driver (prior to lk 2.2.6) can be
 found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt
@@ -61,7 +61,7 @@ There are two packages of sg utilities:
   - sg_utils    for the sg version 2 (and original) driver found in lk 2.2
                 and earlier
 Both packages will work in the lk 2.4 series however sg3_utils offers more
-capabilities. They can be found at: http://www.torque.net/sg and 
+capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and 
 freshmeat.net
 
 Another approach is to look at the applications that use the sg driver.

Documentation/scsi/scsi.txt

@@ -4,8 +4,8 @@ The Linux Documentation Project (LDP) maintains a document describing
 the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
 http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
 and multiple page HTML renderings as well as postscript and pdf.
-It can also be found at http://www.torque.net/scsi/SCSI-2.4-HOWTO .
-
+It can also be found at:
+http://web.archive.org/web/*/http://www.torque.net/scsi/SCSI-2.4-HOWTO
 
 Notes on using modules in the SCSI subsystem
 ============================================

Documentation/scsi/scsi_mid_low_api.txt

@@ -43,7 +43,7 @@ There is a SCSI documentation directory within the kernel source tree,
 typically Documentation/scsi . Most documents are in plain
 (i.e. ASCII) text. This file is named scsi_mid_low_api.txt and can be 
 found in that directory. A more recent copy of this document may be found
-at http://www.torque.net/scsi/scsi_mid_low_api.txt.gz . 
+at http://web.archive.org/web/20070107183357rn_1/sg.torque.net/scsi/. 
 Many LLDs are documented there (e.g. aic7xxx.txt). The SCSI mid-level is
 briefly described in scsi.txt which contains a url to a document 
 describing the SCSI subsystem in the lk 2.4 series. Two upper level 

Documentation/serial/moxa-smartio

@@ -76,7 +76,7 @@ Content
    GNU General Public License in this version. Please refer to GNU General
    Public License announcement in each source code file for more detail.
 
-   In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
+   In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/.
 
    This version of driver can be installed as Loadable Module (Module driver)
    or built-in into kernel (Static driver). You may refer to following

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1285,7 +1285,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     about this driver.  Note that it has been discontinued, but the 
     Voyetra Turtle Beach knowledge base entry for it is still available
     at
-	http://www.turtlebeach.com/site/kb_ftp/790.asp
+	http://www.turtlebeach.com
 
   Module snd-msnd-pinnacle
   ------------------------

Documentation/sound/alsa/HD-Audio.txt

@@ -562,7 +562,7 @@ compare the codec registers directly.
 Send a bug report either the followings:
 
 kernel-bugzilla::
-  http://bugme.linux-foundation.org/
+  https://bugzilla.kernel.org/
 alsa-devel ML::
   alsa-devel@alsa-project.org
 

Documentation/sound/alsa/soc/DAI.txt

@@ -13,7 +13,7 @@ frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
 frame is 21uS long and is divided into 13 time slots.
 
 The AC97 specification can be found at :-
-http://www.intel.com/design/chipsets/audio/ac97_r23.pdf
+http://www.intel.com/p/en_US/business/design
 
 
 I2S

Documentation/sound/alsa/soc/codec.txt

@@ -143,7 +143,7 @@ struct snd_soc_ops {
 };
 
 Please refer to the ALSA driver PCM documentation for details.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 
 5 - DAPM description.

Documentation/sound/alsa/soc/platform.txt

@@ -39,7 +39,7 @@ struct snd_soc_platform {
 };
 
 Please refer to the ALSA driver documentation for details of audio DMA.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
 
 An example DMA driver is soc/pxa/pxa2xx-pcm.c
 

Documentation/sound/oss/README.OSS

@@ -36,7 +36,7 @@ with OSS API.
 
 Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z"
 contain useful utilities to be used with this driver.
-See http://www.opensound.com/ossfree/getting.html for
+See http://www.opensound.com/ossfree/ for
 download instructions.
 
 If you are looking for the installation instructions, please
@@ -1438,7 +1438,7 @@ of this driver (see http://www.4Front-tech.com/oss.html for more info).
 There are some common audio chipsets that are not supported yet. For example
 Sierra Aria and IBM Mwave. It's possible that these architectures
 get some support in future but I can't make any promises. Just look
-at the home page (http://www.opensound.com/ossfree/new_cards.html)
+at the home page (http://www.opensound.com/ossfree/)
 for latest info.
 
 Information about unsupported sound cards and chipsets is welcome as well
@@ -1449,7 +1449,6 @@ If you have any corrections and/or comments, please contact me.
 Hannu Savolainen
 hannu@opensound.com
 
-Personal home page:	   http://www.compusonic.fi/~hannu
 home page of OSS/Free: http://www.opensound.com/ossfree
 
 home page of commercial OSS

Documentation/telephony/ixj.txt

@@ -108,14 +108,9 @@ applications.
 
 1.4  Where to get things
 
-You can download the latest versions of the driver from:
-
-http://www.quicknet.net/develop.htm
-
-You can download the latest version of this document from:
-
-http://www.quicknet.net/develop.htm
+Info on latest versions of the driver are here:
 
+http://web.archive.org/web/*/http://www.quicknet.net/develop.htm
 
 1.5  Mailing List
 

Documentation/uml/UserModeLinux-HOWTO.txt

@@ -8,62 +8,6 @@
 
   Table of Contents
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
   1. Introduction
 
      1.1 How is User Mode Linux Different?
@@ -277,8 +221,7 @@
 
   1. Download the latest UML patch from
 
-     the download page <http://user-mode-linux.sourceforge.net/dl-
-     sf.html>
+     the download page <http://user-mode-linux.sourceforge.net/
 
      In this example, the file is uml-patch-2.4.0-prerelease.bz2.
 
@@ -438,7 +381,7 @@
   as modules, especially filesystems and network protocols and filters,
   so most symbols which need to be exported probably already are.
   However, if you do find symbols that need exporting, let  us
-  <http://user-mode-linux.sourceforge.net/contacts.html>  know, and
+  <http://user-mode-linux.sourceforge.net/>  know, and
   they'll be "taken care of".
 
 
@@ -498,8 +441,8 @@
 
   You will need a filesystem to boot UML from.  There are a number
   available for download from  here  <http://user-mode-
-  linux.sourceforge.net/dl-sf.html> .  There are also  several tools
-  <http://user-mode-linux.sourceforge.net/fs_making.html>  which can be
+  linux.sourceforge.net/> .  There are also  several tools
+  <http://user-mode-linux.sourceforge.net/>  which can be
   used to generate UML-compatible filesystem images from media.
   The kernel will boot up and present you with a login prompt.
 
@@ -1236,7 +1179,7 @@
 
 
   Harald's original README is here <http://user-mode-linux.source-
-  forge.net/text/mcast.txt>  and explains these in detail, as well as
+  forge.net/>  and explains these in detail, as well as
   some other issues.
 
 
@@ -1311,7 +1254,7 @@
   kernel.
 
   These were pointed out by Tim Robinson <timro at trkr dot net> in
-  <http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="this uml-
+  <http://www.geocrawler.com/> name="this uml-
   user post"> .
 
 
@@ -2038,7 +1981,7 @@
 
   uml_moo is installed with the UML deb and RPM.  If you didn't install
   UML from one of those packages, you can also get it from the UML
-  utilities <http://user-mode-linux.sourceforge.net/dl-sf.html#UML
+  utilities <http://user-mode-linux.sourceforge.net/
   utilities>  tar file in tools/moo.
 
 
@@ -4599,7 +4542,7 @@
 
   Michael Jennings <mikejen at hevanet.com>  sent in some material which
   is now gracing the top of the  index  page <http://user-mode-
-  linux.sourceforge.net/index.html>  of this site.
+  linux.sourceforge.net/>  of this site.
 
   SGI <http://www.sgi.com>  (and more specifically Ralf Baechle <ralf at
   uni-koblenz.de> ) gave me an account on oss.sgi.com

Documentation/usb/linux.inf

@@ -9,7 +9,7 @@
 ;
 ; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
 ; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
-;   http://www.microsoft.com/whdc/hwdev/resources/HWservices/rndis.mspx
+;   http://www.microsoft.com/whdc/device/network/ndis/rmndis.mspx
 
 
 [Version]

Documentation/usb/mtouchusb.txt

@@ -54,10 +54,6 @@ generic functions like calibrations, resets, and vendor information can be
 requested from the userspace (And the drivers would handle the vendor specific
 tasks).
 
-ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
-
-http://groomlakelabs.com/grandamp/code/microtouch/
-
 TODO:
 
 Implement a control urb again to handle requests to and from the device
@@ -68,7 +64,7 @@ DISCLAIMER:
 I am not a MicroTouch/3M employee, nor have I ever been.  3M does not support 
 this driver!  If you want touch drivers only supported within X, please go to:
 
-http://www.3m.com/3MTouchSystems/downloads/
+http://www.3m.com/3MTouchSystems/
 
 THANKS:
 

Documentation/usb/usb-serial.txt

@@ -83,7 +83,7 @@ HandSpring Visor, Palm USB, and Clié USB driver
   parameters.  e.g. modprobe visor vendor=0x54c product=0x66
   
   There is a webpage and mailing lists for this portion of the driver at:
-  http://usbvisor.sourceforge.net/
+  http://sourceforge.net/projects/usbvisor/
 
   For any questions or problems with this driver, please contact Greg
   Kroah-Hartman at greg@kroah.com
@@ -184,7 +184,7 @@ Keyspan USA-series Serial Adapters
     functionality.
   
   More information is available at:
-        http://misc.nu/hugh/keyspan.html
+        http://www.carnationsoftware.com/carnation/Keyspan.html
    
   For any questions or problems with this driver, please contact Hugh
   Blemings at hugh@misc.nu

Documentation/video4linux/API.html

@@ -17,7 +17,7 @@
    </tr>
    <tr>
     <td>
-     <a href="http://www.linuxtv.org/downloads/video4linux/API/V4L2_API">V4L2 API</a>
+     <a href="http://v4l2spec.bytesex.org/spec-single/v4l2.html">V4L2 API</a>
     </td>
     <td>Should be used for new projects
     </td>

Documentation/video4linux/CQcam.txt

@@ -203,11 +203,11 @@ The V4L2 API spec:
   http://v4l2spec.bytesex.org/
 
 Some web pages about the quickcams:
-   http://www.dkfz-heidelberg.de/Macromol/wedemann/mini-HOWTO-cqcam.html
+   http://www.pingouin-land.com/howto/QuickCam-HOWTO.html
 
    http://www.crynwr.com/qcpc/            QuickCam Third-Party Drivers
    http://www.crynwr.com/qcpc/re.html     Some Reverse Engineering
-   http://cse.unl.edu/~cluening/gqcam/    v4l client
+   http://www.wirelesscouch.net/software/gqcam/   v4l client
    http://phobos.illtel.denver.co.us/pub/qcread/ doesn't use v4l
    ftp://ftp.cs.unm.edu/pub/chris/quickcam/   Has lots of drivers
    http://www.cs.duke.edu/~reynolds/quickcam/ Has lots of information

Documentation/video4linux/README.cpia

@@ -185,7 +185,7 @@ THANKS (in no particular order):
 ---------------------------------------------------------------------------
 REFERENCES
 
-   1. http://www.risc.uni-linz.ac.at/people/ppregler
+   1. http://www.risc.uni-linz.ac.at/
       mailto:Peter_Pregler@email.com
    2. see the file COPYING in the top directory of the kernel tree
    3. http://webcam.sourceforge.net/

Documentation/video4linux/README.ivtv

@@ -10,7 +10,7 @@ Hauppauge PVR-350.
 NOTE: this driver requires the latest encoder firmware (version 2.06.039, size
 376836 bytes). Get the firmware from here:
 
-http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz
+http://dl.ivtvdriver.org/ivtv/firmware/
 
 NOTE: 'normal' TV applications do not work with this driver, you need
 an application that can handle MPEG input such as mplayer, xine, MythTV,

Documentation/video4linux/Zoran

@@ -174,7 +174,7 @@ and is used in Argentinia, Uruguay, an a few others
 We do not talk about how the audio is broadcast !
 
 A rather good sites about the TV standards are:
-http://www.sony.jp/ServiceArea/Voltage_map/
+http://www.sony.jp/support/
 http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/
 and http://www.cabl.com/restaurant/channel.html
 
@@ -330,7 +330,7 @@ These extensions are known as the v4l/mjpeg extensions. See zoran.h for
 details (structs/ioctls).
 
 Information - video4linux:
-http://roadrunner.swansea.linux.org.uk/v4lapi.shtml
+http://linux.bytesex.org/v4l2/API.html
 Documentation/video4linux/API.html
 /usr/include/linux/videodev.h
 
@@ -390,7 +390,7 @@ BUZIOC_G_STATUS
 Get the status of the input lines (video source connected/norm).
 
 For programming example, please, look at lavrec.c and lavplay.c code in
-lavtools-1.2p2 package (URL: http://www.cicese.mx/~mirsev/DC10plus/)
+lavtools-1.2p2 package (URL: http://www.cicese.mx/)
 and the 'examples' directory in the original Buz driver distribution.
 
 Additional notes for software developers:

Documentation/video4linux/bttv/Cards

@@ -802,7 +802,7 @@ Kworld (www.kworld.com.tw)
 
 
 
-JTT/ Justy Corp.http://www.justy.co.jp/ (www.jtt.com.jp website down)
+JTT/ Justy Corp.(http://www.jtt.ne.jp/)
 ---------------------------------------------------------------------
    JTT-02 (JTT TV) "TV watchmate pro" (bt848)
 
@@ -828,7 +828,7 @@ Eline www.eline-net.com/
    Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26  (bt878)
    Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x)
 
-Spirit http://www.spiritmodems.com.au/
+Spirit 
 ------
    Spirit TV Tuner/Video Capture Card (bt848)
 
@@ -959,6 +959,6 @@ Asus www.asuscom.com
 
 Hoontech
 --------
-http://www.hoontech.com/korean/download/down_driver_list03.html
+http://www.hoontech.de/
    HART Vision 848 (H-ART Vision 848)
    HART Vision 878 (H-Art Vision 878)

Documentation/video4linux/bttv/MAKEDEV

@@ -14,7 +14,7 @@ function makedev () {
 	ln -s /dev/${1}0 /dev/$1
 }
 
-# see http://roadrunner.swansea.uk.linux.org/v4lapi.shtml
+# see http://linux.bytesex.org/v4l2/API.html
 
 echo "*** new device names ***"
 makedev video 0

Documentation/video4linux/bttv/Specs

 Philips		http://www.Semiconductors.COM/pip/
-Conexant	http://www.conexant.com/techinfo/default.asp
-Micronas	http://www.micronas.de/pages/product_documentation/index.html
+Conexant	http://www.conexant.com/
+Micronas	http://www.micronas.com/en/home/index.html

Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt

@@ -44,7 +44,7 @@ http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
 This data sheet (google search) seems to have a lovely description of the
 RC5 basics
 
-http://users.pandora.be/nenya/electronics/rc5/  and more data
+http://www.nenya.be/beor/electronics/rc5.htm  and more data
 
 http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
 and even a reference to how to decode a bi-phase data stream.

Documentation/video4linux/hauppauge-wintv-cx88-ir.txt

@@ -44,7 +44,7 @@ http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
 This data sheet (google search) seems to have a lovely description of the
 RC5 basics
 
-http://users.pandora.be/nenya/electronics/rc5/  and more data
+http://www.nenya.be/beor/electronics/rc5.htm and more data
 
 http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
 and even a reference to how to decode a bi-phase data stream.

Documentation/video4linux/ibmcam.txt

@@ -27,9 +27,8 @@ SUPPORTED CAMERAS:
 
 Xirlink "C-It" camera, also known as "IBM PC Camera".
 The device uses proprietary ASIC (and compression method);
-it is manufactured by Xirlink. See http://www.xirlink.com/
-(renamed to http://www.veo.com), http://www.ibmpccamera.com,
-or http://www.c-itnow.com/ for details and pictures.
+it is manufactured by Xirlink. See http://xirlinkwebcam.sourceforge.net, 
+http://www.ibmpccamera.com, or http://www.c-itnow.com/ for details and pictures.
 
 This very chipset ("X Chip", as marked at the factory)
 is used in several other cameras, and they are supported

Documentation/video4linux/se401.txt

@@ -49,6 +49,6 @@ order to increase the throughput (and thus framerate).
 HELP:
 
 The latest info on this driver can be found at:
-http://www.chello.nl/~j.vreeken/se401/
+http://members.chello.nl/~j.vreeken/se401/
 And questions to me can be send to:
 pe1rxq@amsat.org

Documentation/video4linux/w9966.txt

@@ -24,7 +24,7 @@ where every two pixels take 4 bytes. In SDL (www.libsdl.org) this format
 is called VIDEO_PALETTE_YUV422 (16 bpp).
 
 A minimal test application (with source) is available from:
-  http://hem.fyristorg.com/mogul/w9966.html
+  http://www.slackwaresupport.com/howtos/Webcam-HOWTO
 
 The slow framerate is due to missing DMA ECP read support in the
 parport drivers. I might add working EPP support later.

Documentation/w1/masters/ds2482

@@ -6,8 +6,8 @@ Supported chips:
     Prefix: 'ds2482'
     Addresses scanned: None
     Datasheets:
-        http://pdfserv.maxim-ic.com/en/ds/DS2482-100-DS2482S-100.pdf
-        http://pdfserv.maxim-ic.com/en/ds/DS2482-800-DS2482S-800.pdf
+        http://datasheets.maxim-ic.com/en/ds/DS2482-100.pdf
+        http://datasheets.maxim-ic.com/en/ds/DS2482-800.pdf
 
 Author: Ben Gardner <bgardner@wabtec.com>
 

Documentation/w1/masters/mxc-w1

@@ -5,7 +5,8 @@ Supported chips:
   * Freescale MX27, MX31 and probably other i.MX SoCs
     Datasheets:
         http://www.freescale.com/files/32bit/doc/data_sheet/MCIMX31.pdf?fpsp=1
-	http://www.freescale.com/files/dsp/MCIMX27.pdf?fpsp=1
+	http://cache.freescale.com/files/dsp/doc/archive/MCIMX27.pdf?fsrch=1&WT_TYPE=
+	Data%20Sheets&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation
 
 Author: Originally based on Freescale code, prepared for mainline by
 	Sascha Hauer <s.hauer@pengutronix.de>

Documentation/w1/masters/omap-hdq

@@ -7,7 +7,7 @@ Supported chips:
 
 A useful link about HDQ basics:
 ===============================
-http://focus.ti.com/lit/an/slua408/slua408.pdf
+http://focus.ti.com/lit/an/slua408a/slua408a.pdf
 
 Description:
 ============

Documentation/zh_CN/HOWTO

@@ -112,7 +112,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与
 
     其他关于如何正确地生成补丁的优秀文档包括：
     "The Perfect Patch"
-        http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+        http://userweb.kernel.org/~akpm/stuff/tpp.txt
     "Linux kernel patch submission format"
         http://linux.yyz.us/patch-format.html
 
@@ -168,7 +168,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与
 
 如果你想加入内核开发社区并协助完成一些任务，却找不到从哪里开始，可以访问
 “Linux内核房管员”计划：
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors
 这是极佳的起点。它提供一个相对简单的任务列表，列出内核代码中需要被重新
 整理或者改正的地方。通过和负责这个计划的开发者们一同工作，你会学到将补丁
 集成进内核的基本原理。如果还没有决定下一步要做什么的话，你还可能会得到方
@@ -515,7 +515,7 @@ Linux内核社区并不喜欢一下接收大段的代码。修改需要被恰当
 
 想了解它具体应该看起来像什么，请查阅以下文档中的“ChangeLog”章节：
   “The Perfect Patch”
-      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+  	 http://userweb.kernel.org/~akpm/stuff/tpp.txt
 
 
 这些事情有时候做起来很难。要在任何方面都做到完美可能需要好几年时间。这是
@@ -525,7 +525,7 @@ Linux内核社区并不喜欢一下接收大段的代码。修改需要被恰当
 
 ---------------
 感谢Paolo Ciarrocchi允许“开发流程”部分基于他所写的文章
-(http://linux.tar.bz/articles/2.6-development_process)，感谢Randy
+(http://www.kerneltravel.net/newbie/2.6-development_process)，感谢Randy
 Dunlap和Gerrit Huizenga完善了应该说和不该说的列表。感谢Pat Mochel, Hanna
 Linder, Randy Dunlap, Kay Sievers, Vojtech Pavlik, Jan Kara, Josh Boyer,
 Kees Cook, Andrew Morton, Andi Kleen, Vadim Lobanov, Jesper Juhl, Adrian

Documentation/zh_CN/SubmittingDrivers

@@ -165,4 +165,4 @@ Linux USB项目：
 	http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
 
 内核清洁工 (Kernel Janitor):
-	http://janitor.kernelnewbies.org/
+	http://kernelnewbies.org/KernelJanitors

Documentation/zh_CN/SubmittingPatches

@@ -83,7 +83,7 @@ Quilt:
 http://savannah.nongnu.org/projects/quilt
 
 Andrew Morton 的补丁脚本:
-http://www.zip.com.au/~akpm/linux/patches/
+http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz
 作为这些脚本的替代，quilt 是值得推荐的补丁管理工具(看上面的链接)。
 
 2)描述你的改动。
@@ -166,7 +166,7 @@ MAITAINERS 文件里的）发送一个手册页（man-pages）补丁，或者至
   人拷贝，只要它是琐碎的）
   任何文件的作者/维护者对该文件的改动（例如 patch monkey 在重传模式下）
 
-URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+EMAIL: trivial@kernel.org
 
 (译注，关于“琐碎补丁”的一些说明：因为原文的这一部分写得比较简单，所以不得不
 违例写一下译注。"trivial"这个英文单词的本意是“琐碎的，不重要的。”但是在这里
@@ -394,7 +394,7 @@ Static inline 函数相比宏来说，是好得多的选择。Static inline 函
 ----------------
 
 Andrew Morton, "The perfect patch" (tpp).
-  <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+  <http://userweb.kernel.org/~akpm/stuff/tpp.txt>
 
 Jeff Garzik, "Linux kernel patch submission format".
   <http://linux.yyz.us/patch-format.html>