Commit 0ebbb957 authored by Ralph Sennhauser's avatar Ralph Sennhauser Committed by Gregory CLEMENT

ARM: dts: armada-385-linksys: use binary unit prefixes

Use IEEE 1541-2002 unit prefixes for sizes.
Signed-off-by: default avatarRalph Sennhauser <ralph.sennhauser@gmail.com>
Signed-off-by: default avatarImre Kaloz <kaloz@openwrt.org>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 4c38d10c
......@@ -52,7 +52,7 @@ chosen {
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
reg = <0x00000000 0x20000000>; /* 512 MiB */
};
soc {
......@@ -180,50 +180,50 @@ &nand {
partition@0 {
label = "u-boot";
reg = <0x0000000 0x200000>; /* 2MB */
reg = <0x0000000 0x200000>; /* 2MiB */
read-only;
};
partition@100000 {
label = "u_env";
reg = <0x200000 0x40000>; /* 256KB */
reg = <0x200000 0x40000>; /* 256KiB */
};
partition@140000 {
label = "s_env";
reg = <0x240000 0x40000>; /* 256KB */
reg = <0x240000 0x40000>; /* 256KiB */
};
partition@900000 {
label = "devinfo";
reg = <0x900000 0x100000>; /* 1MB */
reg = <0x900000 0x100000>; /* 1MiB */
read-only;
};
/* kernel1 overlaps with rootfs1 by design */
partition@a00000 {
label = "kernel1";
reg = <0xa00000 0x2800000>; /* 40MB */
reg = <0xa00000 0x2800000>; /* 40MiB */
};
partition@1000000 {
label = "rootfs1";
reg = <0x1000000 0x2200000>; /* 34MB */
reg = <0x1000000 0x2200000>; /* 34MiB */
};
/* kernel2 overlaps with rootfs2 by design */
partition@3200000 {
label = "kernel2";
reg = <0x3200000 0x2800000>; /* 40MB */
reg = <0x3200000 0x2800000>; /* 40MiB */
};
partition@3800000 {
label = "rootfs2";
reg = <0x3800000 0x2200000>; /* 34MB */
reg = <0x3800000 0x2200000>; /* 34MiB */
};
/*
* 38MB, last MB is for the BBT, not writable
* 38MiB, last MiB is for the BBT, not writable
*/
partition@5a00000 {
label = "syscfg";
......@@ -238,7 +238,7 @@ partition@5a00000 {
*/
partition@180000 {
label = "unused_area";
reg = <0x280000 0x680000>; /* 6.5MB */
reg = <0x280000 0x680000>; /* 6.5MiB */
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment