Bluetooth: hci_qca: Add delay after power-off pulse

During initialization the power-on pulse is currently sent inmediately
after the prior power-off pulse. With this initialization often fails
at boot time:

[   15.205224] Bluetooth: hci0: setting up wcn3990
[   17.341062] Bluetooth: hci0: command 0xfc00 tx timeout
[   22.101453] ERROR: Bluetooth initialization failed
[   25.337740] Bluetooth: hci0: Reading QCA version information failed (-110)

After a power-off pulse wait 10ms to give the controller time to power
off. Remove the previous short settling delay, it isn't needed anymore.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/hci_qca.c

@@ -1031,13 +1031,13 @@ static int qca_send_power_pulse(struct hci_uart *hu, bool on)
 	}
 
 	serdev_device_wait_until_sent(hu->serdev, timeout);
-
-	/* Wait for 100 uS for SoC to settle down */
-	usleep_range(100, 200);
 	hci_uart_set_flow_control(hu, false);
 
+	/* Give to controller time to boot/shutdown */
 	if (on)
 		msleep(100);
+	else
+		msleep(10);
 
 	return 0;
 }