blackfin: fix wrong CTS inversion

The Blackfin serial headers were inverting the CTS value leading to wrong
handling of the CTS line which broke CTS/RTS handling completely.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)