Commit 0ef91ccd authored by Dinh Nguyen's avatar Dinh Nguyen

arm: dts: socfpga: add reset-names to spi node

Add reset-names = "spi" to spi dts nodes.
Signed-off-by: default avatarDinh Nguyen <dinguyen@kernel.org>
parent d4ae4dd3
...@@ -829,6 +829,7 @@ spi0: spi@fff00000 { ...@@ -829,6 +829,7 @@ spi0: spi@fff00000 {
num-cs = <4>; num-cs = <4>;
clocks = <&spi_m_clk>; clocks = <&spi_m_clk>;
resets = <&rst SPIM0_RESET>; resets = <&rst SPIM0_RESET>;
reset-names = "spi";
status = "disabled"; status = "disabled";
}; };
...@@ -841,6 +842,7 @@ spi1: spi@fff01000 { ...@@ -841,6 +842,7 @@ spi1: spi@fff01000 {
num-cs = <4>; num-cs = <4>;
clocks = <&spi_m_clk>; clocks = <&spi_m_clk>;
resets = <&rst SPIM1_RESET>; resets = <&rst SPIM1_RESET>;
reset-names = "spi";
status = "disabled"; status = "disabled";
}; };
......
...@@ -613,6 +613,7 @@ spi0: spi@ffda4000 { ...@@ -613,6 +613,7 @@ spi0: spi@ffda4000 {
/*32bit_access;*/ /*32bit_access;*/
clocks = <&spi_m_clk>; clocks = <&spi_m_clk>;
resets = <&rst SPIM0_RESET>; resets = <&rst SPIM0_RESET>;
reset-names = "spi";
status = "disabled"; status = "disabled";
}; };
...@@ -628,6 +629,7 @@ spi1: spi@ffda5000 { ...@@ -628,6 +629,7 @@ spi1: spi@ffda5000 {
rx-dma-channel = <&pdma 17>; rx-dma-channel = <&pdma 17>;
clocks = <&spi_m_clk>; clocks = <&spi_m_clk>;
resets = <&rst SPIM1_RESET>; resets = <&rst SPIM1_RESET>;
reset-names = "spi";
status = "disabled"; status = "disabled";
}; };
......
...@@ -380,6 +380,7 @@ spi0: spi@ffda4000 { ...@@ -380,6 +380,7 @@ spi0: spi@ffda4000 {
reg = <0xffda4000 0x1000>; reg = <0xffda4000 0x1000>;
interrupts = <0 99 4>; interrupts = <0 99 4>;
resets = <&rst SPIM0_RESET>; resets = <&rst SPIM0_RESET>;
reset-names = "spi";
reg-io-width = <4>; reg-io-width = <4>;
num-cs = <4>; num-cs = <4>;
clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
...@@ -393,6 +394,7 @@ spi1: spi@ffda5000 { ...@@ -393,6 +394,7 @@ spi1: spi@ffda5000 {
reg = <0xffda5000 0x1000>; reg = <0xffda5000 0x1000>;
interrupts = <0 100 4>; interrupts = <0 100 4>;
resets = <&rst SPIM1_RESET>; resets = <&rst SPIM1_RESET>;
reset-names = "spi";
reg-io-width = <4>; reg-io-width = <4>;
num-cs = <4>; num-cs = <4>;
clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
......
...@@ -380,6 +380,7 @@ spi0: spi@ffda4000 { ...@@ -380,6 +380,7 @@ spi0: spi@ffda4000 {
reg = <0xffda4000 0x1000>; reg = <0xffda4000 0x1000>;
interrupts = <0 99 4>; interrupts = <0 99 4>;
resets = <&rst SPIM0_RESET>; resets = <&rst SPIM0_RESET>;
reset-names = "spi";
reg-io-width = <4>; reg-io-width = <4>;
num-cs = <4>; num-cs = <4>;
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
...@@ -393,6 +394,7 @@ spi1: spi@ffda5000 { ...@@ -393,6 +394,7 @@ spi1: spi@ffda5000 {
reg = <0xffda5000 0x1000>; reg = <0xffda5000 0x1000>;
interrupts = <0 100 4>; interrupts = <0 100 4>;
resets = <&rst SPIM1_RESET>; resets = <&rst SPIM1_RESET>;
reset-names = "spi";
reg-io-width = <4>; reg-io-width = <4>;
num-cs = <4>; num-cs = <4>;
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment