ipmi: Convert the IPMI SI ACPI handling to a platform device

The IPMI SI driver was using direct PNP, but that was not really
ideal because the IPMI device is a platform device.  There was
some special handling in the acpi_pnp.c code for making this work,
but that was breaking ACPI handling for the IPMI SSIF driver.

So without this patch there were significant issues getting the
SSIF driver to work with ACPI.

So use a platform device for ACPI detection and remove the
entry from acpi_pnp.c.
Signed-off-by: Corey Minyard <cminyard@mvista.com>

drivers/acpi/acpi_pnp.c

@@ -19,8 +19,6 @@ static const struct acpi_device_id acpi_pnp_device_ids[] = {
 	{"PNP0600"},		/* Generic ESDI/IDE/ATA compatible hard disk controller */
 	/* floppy */
 	{"PNP0700"},
-	/* ipmi_si */
-	{"IPI0001"},
 	/* tpm_inf_pnp */
 	{"IFX0101"},		/* Infineon TPMs */
 	{"IFX0102"},		/* Infineon TPMs */

drivers/char/ipmi/ipmi_si_intf.c

@@ -64,7 +64,6 @@
 #include <linux/dmi.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
-#include <linux/pnp.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
@@ -309,9 +308,6 @@ static int num_force_kipmid;
 #ifdef CONFIG_PCI
 static bool pci_registered;
 #endif
-#ifdef CONFIG_ACPI
-static bool pnp_registered;
-#endif
 #ifdef CONFIG_PARISC
 static bool parisc_registered;
 #endif
@@ -2233,134 +2229,6 @@ static void spmi_find_bmc(void)
 		try_init_spmi(spmi);
 	}
 }
-
-static int ipmi_pnp_probe(struct pnp_dev *dev,
-				    const struct pnp_device_id *dev_id)
-{
-	struct acpi_device *acpi_dev;
-	struct smi_info *info;
-	struct resource *res, *res_second;
-	acpi_handle handle;
-	acpi_status status;
-	unsigned long long tmp;
-	int rv = -EINVAL;
-
-	acpi_dev = pnp_acpi_device(dev);
-	if (!acpi_dev)
-		return -ENODEV;
-
-	info = smi_info_alloc();
-	if (!info)
-		return -ENOMEM;
-
-	info->addr_source = SI_ACPI;
-	printk(KERN_INFO PFX "probing via ACPI\n");
-
-	handle = acpi_dev->handle;
-	info->addr_info.acpi_info.acpi_handle = handle;
-
-	/* _IFT tells us the interface type: KCS, BT, etc */
-	status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
-	if (ACPI_FAILURE(status)) {
-		dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
-		goto err_free;
-	}
-
-	switch (tmp) {
-	case 1:
-		info->si_type = SI_KCS;
-		break;
-	case 2:
-		info->si_type = SI_SMIC;
-		break;
-	case 3:
-		info->si_type = SI_BT;
-		break;
-	case 4: /* SSIF, just ignore */
-		rv = -ENODEV;
-		goto err_free;
-	default:
-		dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
-		goto err_free;
-	}
-
-	res = pnp_get_resource(dev, IORESOURCE_IO, 0);
-	if (res) {
-		info->io_setup = port_setup;
-		info->io.addr_type = IPMI_IO_ADDR_SPACE;
-	} else {
-		res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
-		if (res) {
-			info->io_setup = mem_setup;
-			info->io.addr_type = IPMI_MEM_ADDR_SPACE;
-		}
-	}
-	if (!res) {
-		dev_err(&dev->dev, "no I/O or memory address\n");
-		goto err_free;
-	}
-	info->io.addr_data = res->start;
-
-	info->io.regspacing = DEFAULT_REGSPACING;
-	res_second = pnp_get_resource(dev,
-			       (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
-					IORESOURCE_IO : IORESOURCE_MEM,
-			       1);
-	if (res_second) {
-		if (res_second->start > info->io.addr_data)
-			info->io.regspacing = res_second->start - info->io.addr_data;
-	}
-	info->io.regsize = DEFAULT_REGSPACING;
-	info->io.regshift = 0;
-
-	/* If _GPE exists, use it; otherwise use standard interrupts */
-	status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
-	if (ACPI_SUCCESS(status)) {
-		info->irq = tmp;
-		info->irq_setup = acpi_gpe_irq_setup;
-	} else if (pnp_irq_valid(dev, 0)) {
-		info->irq = pnp_irq(dev, 0);
-		info->irq_setup = std_irq_setup;
-	}
-
-	info->dev = &dev->dev;
-	pnp_set_drvdata(dev, info);
-
-	dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
-		 res, info->io.regsize, info->io.regspacing,
-		 info->irq);
-
-	rv = add_smi(info);
-	if (rv)
-		kfree(info);
-
-	return rv;
-
-err_free:
-	kfree(info);
-	return rv;
-}
-
-static void ipmi_pnp_remove(struct pnp_dev *dev)
-{
-	struct smi_info *info = pnp_get_drvdata(dev);
-
-	cleanup_one_si(info);
-}
-
-static const struct pnp_device_id pnp_dev_table[] = {
-	{"IPI0001", 0},
-	{"", 0},
-};
-
-static struct pnp_driver ipmi_pnp_driver = {
-	.name		= DEVICE_NAME,
-	.probe		= ipmi_pnp_probe,
-	.remove		= ipmi_pnp_remove,
-	.id_table	= pnp_dev_table,
-};
-
-MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
 #endif
 
 #ifdef CONFIG_DMI
@@ -2669,10 +2537,19 @@ static struct pci_driver ipmi_pci_driver = {
 };
 #endif /* CONFIG_PCI */
 
-static const struct of_device_id ipmi_match[];
-static int ipmi_probe(struct platform_device *dev)
-{
 #ifdef CONFIG_OF
+static const struct of_device_id of_ipmi_match[] = {
+	{ .type = "ipmi", .compatible = "ipmi-kcs",
+	  .data = (void *)(unsigned long) SI_KCS },
+	{ .type = "ipmi", .compatible = "ipmi-smic",
+	  .data = (void *)(unsigned long) SI_SMIC },
+	{ .type = "ipmi", .compatible = "ipmi-bt",
+	  .data = (void *)(unsigned long) SI_BT },
+	{},
+};
+
+static int of_ipmi_probe(struct platform_device *dev)
+{
 	const struct of_device_id *match;
 	struct smi_info *info;
 	struct resource resource;
@@ -2683,9 +2560,9 @@ static int ipmi_probe(struct platform_device *dev)
 
 	dev_info(&dev->dev, "probing via device tree\n");
 
-	match = of_match_device(ipmi_match, &dev->dev);
+	match = of_match_device(of_ipmi_match, &dev->dev);
 	if (!match)
-		return -EINVAL;
+		return -ENODEV;
 
 	if (!of_device_is_available(np))
 		return -EINVAL;
@@ -2754,33 +2631,161 @@ static int ipmi_probe(struct platform_device *dev)
 		kfree(info);
 		return ret;
 	}
-#endif
 	return 0;
 }
+#else
+#define of_ipmi_match NULL
+static int of_ipmi_probe(struct platform_device *dev)
+{
+	return -ENODEV;
+}
+#endif
 
-static int ipmi_remove(struct platform_device *dev)
+#ifdef CONFIG_ACPI
+static int acpi_ipmi_probe(struct platform_device *dev)
 {
-#ifdef CONFIG_OF
-	cleanup_one_si(dev_get_drvdata(&dev->dev));
+	struct smi_info *info;
+	struct resource *res, *res_second;
+	acpi_handle handle;
+	acpi_status status;
+	unsigned long long tmp;
+	int rv = -EINVAL;
+
+	handle = ACPI_HANDLE(&dev->dev);
+	if (!handle)
+		return -ENODEV;
+
+	info = smi_info_alloc();
+	if (!info)
+		return -ENOMEM;
+
+	info->addr_source = SI_ACPI;
+	dev_info(&dev->dev, PFX "probing via ACPI\n");
+
+	info->addr_info.acpi_info.acpi_handle = handle;
+
+	/* _IFT tells us the interface type: KCS, BT, etc */
+	status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&dev->dev, "Could not find ACPI IPMI interface type\n");
+		goto err_free;
+	}
+
+	switch (tmp) {
+	case 1:
+		info->si_type = SI_KCS;
+		break;
+	case 2:
+		info->si_type = SI_SMIC;
+		break;
+	case 3:
+		info->si_type = SI_BT;
+		break;
+	case 4: /* SSIF, just ignore */
+		rv = -ENODEV;
+		goto err_free;
+	default:
+		dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
+		goto err_free;
+	}
+
+	res = platform_get_resource(dev, IORESOURCE_IO, 0);
+	if (res) {
+		info->io_setup = port_setup;
+		info->io.addr_type = IPMI_IO_ADDR_SPACE;
+	} else {
+		res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+		if (res) {
+			info->io_setup = mem_setup;
+			info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+		}
+	}
+	if (!res) {
+		dev_err(&dev->dev, "no I/O or memory address\n");
+		goto err_free;
+	}
+	info->io.addr_data = res->start;
+
+	info->io.regspacing = DEFAULT_REGSPACING;
+	res_second = platform_get_resource(dev,
+			       (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
+					IORESOURCE_IO : IORESOURCE_MEM,
+			       1);
+	if (res_second) {
+		if (res_second->start > info->io.addr_data)
+			info->io.regspacing =
+				res_second->start - info->io.addr_data;
+	}
+	info->io.regsize = DEFAULT_REGSPACING;
+	info->io.regshift = 0;
+
+	/* If _GPE exists, use it; otherwise use standard interrupts */
+	status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
+	if (ACPI_SUCCESS(status)) {
+		info->irq = tmp;
+		info->irq_setup = acpi_gpe_irq_setup;
+	} else {
+		int irq = platform_get_irq(dev, 0);
+
+		if (irq > 0) {
+			info->irq = irq;
+			info->irq_setup = std_irq_setup;
+		}
+	}
+
+	info->dev = &dev->dev;
+	platform_set_drvdata(dev, info);
+
+	dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
+		 res, info->io.regsize, info->io.regspacing,
+		 info->irq);
+
+	rv = add_smi(info);
+	if (rv)
+		kfree(info);
+
+	return rv;
+
+err_free:
+	kfree(info);
+	return rv;
+}
+
+static struct acpi_device_id acpi_ipmi_match[] = {
+	{ "IPI0001", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, acpi_ipmi_match);
+#else
+static int acpi_ipmi_probe(struct platform_device *dev)
+{
+	return -ENODEV;
+}
 #endif
+
+static int ipmi_probe(struct platform_device *dev)
+{
+	if (of_ipmi_probe(dev) == 0)
 		return 0;
+
+	return acpi_ipmi_probe(dev);
 }
 
-static const struct of_device_id ipmi_match[] =
+static int ipmi_remove(struct platform_device *dev)
 {
-	{ .type = "ipmi", .compatible = "ipmi-kcs",
-	  .data = (void *)(unsigned long) SI_KCS },
-	{ .type = "ipmi", .compatible = "ipmi-smic",
-	  .data = (void *)(unsigned long) SI_SMIC },
-	{ .type = "ipmi", .compatible = "ipmi-bt",
-	  .data = (void *)(unsigned long) SI_BT },
-	{},
-};
+	struct smi_info *info = dev_get_drvdata(&dev->dev);
+
+	if (info)
+		cleanup_one_si(info);
+
+	return 0;
+}
 
 static struct platform_driver ipmi_driver = {
 	.driver = {
 		.name = DEVICE_NAME,
-		.of_match_table = ipmi_match,
+		.of_match_table = of_ipmi_match,
+		.acpi_match_table = ACPI_PTR(acpi_ipmi_match),
 	},
 	.probe		= ipmi_probe,
 	.remove		= ipmi_remove,
@@ -3692,13 +3697,6 @@ static int init_ipmi_si(void)
 	}
 #endif
 
-#ifdef CONFIG_ACPI
-	if (si_tryacpi) {
-		pnp_register_driver(&ipmi_pnp_driver);
-		pnp_registered = true;
-	}
-#endif
-
 #ifdef CONFIG_DMI
 	if (si_trydmi)
 		dmi_find_bmc();
@@ -3850,10 +3848,6 @@ static void cleanup_ipmi_si(void)
 	if (pci_registered)
 		pci_unregister_driver(&ipmi_pci_driver);
 #endif
-#ifdef CONFIG_ACPI
-	if (pnp_registered)
-		pnp_unregister_driver(&ipmi_pnp_driver);
-#endif
 #ifdef CONFIG_PARISC
 	if (parisc_registered)
 		unregister_parisc_driver(&ipmi_parisc_driver);