usb: udc: add Faraday fusb300 driver

USB2.0 device controller driver for Faraday fubs300
Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/Kconfig

@@ -176,6 +176,18 @@ config USB_FSL_USB2
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_FUSB300
+	boolean "Faraday FUSB300 USB Peripheral Controller"
+	select USB_GADGET_DUALSPEED
+	help
+	   Faraday usb device controller FUSB300 driver
+
+config USB_FUSB300
+	tristate
+	depends on USB_GADGET_FUSB300
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 config USB_GADGET_LH7A40X
 	boolean "LH7A40X"
 	depends on ARCH_LH7A40X

drivers/usb/gadget/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
 obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o mv_udc_phy.o
 obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
+obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 
 #
 # USB gadget drivers

drivers/usb/gadget/fusb300_udc.c

+/*
+ * Fusb300 UDC (USB gadget)
+ *
+ * Copyright (C) 2010 Faraday Technology Corp.
+ *
+ * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+#include "fusb300_udc.h"
+
+MODULE_DESCRIPTION("FUSB300  USB gadget driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>");
+MODULE_ALIAS("platform:fusb300_udc");
+
+#define DRIVER_VERSION	"20 October 2010"
+
+static const char udc_name[] = "fusb300_udc";
+static const char * const fusb300_ep_name[] = {
+	"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7"
+};
+
+static void done(struct fusb300_ep *ep, struct fusb300_request *req,
+		 int status);
+
+static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset,
+			       u32 value)
+{
+	u32 reg = ioread32(fusb300->reg + offset);
+
+	reg |= value;
+	iowrite32(reg, fusb300->reg + offset);
+}
+
+static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset,
+				u32 value)
+{
+	u32 reg = ioread32(fusb300->reg + offset);
+
+	reg &= ~value;
+	iowrite32(reg, fusb300->reg + offset);
+}
+
+
+static void fusb300_ep_setting(struct fusb300_ep *ep,
+			       struct fusb300_ep_info info)
+{
+	ep->epnum = info.epnum;
+	ep->type = info.type;
+}
+
+static int fusb300_ep_release(struct fusb300_ep *ep)
+{
+	if (!ep->epnum)
+		return 0;
+	ep->epnum = 0;
+	ep->stall = 0;
+	ep->wedged = 0;
+	return 0;
+}
+
+static void fusb300_set_fifo_entry(struct fusb300 *fusb300,
+				   u32 ep)
+{
+	u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+
+	val &= ~FUSB300_EPSET1_FIFOENTRY_MSK;
+	val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM);
+	iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+}
+
+static void fusb300_set_start_entry(struct fusb300 *fusb300,
+				    u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+	u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM;
+
+	reg &= ~FUSB300_EPSET1_START_ENTRY_MSK	;
+	reg |= FUSB300_EPSET1_START_ENTRY(start_entry);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+	if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) {
+		fusb300->fifo_entry_num = 0;
+		fusb300->addrofs = 0;
+		pr_err("fifo entry is over the maximum number!\n");
+	} else
+		fusb300->fifo_entry_num++;
+}
+
+/* set fusb300_set_start_entry first before fusb300_set_epaddrofs */
+static void fusb300_set_epaddrofs(struct fusb300 *fusb300,
+				  struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+
+	reg &= ~FUSB300_EPSET2_ADDROFS_MSK;
+	reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+	fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM;
+}
+
+static void ep_fifo_setting(struct fusb300 *fusb300,
+			    struct fusb300_ep_info info)
+{
+	fusb300_set_fifo_entry(fusb300, info.epnum);
+	fusb300_set_start_entry(fusb300, info.epnum);
+	fusb300_set_epaddrofs(fusb300, info);
+}
+
+static void fusb300_set_eptype(struct fusb300 *fusb300,
+			       struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_TYPE_MSK;
+	reg |= FUSB300_EPSET1_TYPE(info.type);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_epdir(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg;
+
+	if (!info.dir_in)
+		return;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+	reg &= ~FUSB300_EPSET1_DIR_MSK;
+	reg |= FUSB300_EPSET1_DIRIN;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_ep_active(struct fusb300 *fusb300,
+			  u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+
+	reg |= FUSB300_EPSET1_ACTEN;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
+}
+
+static void fusb300_set_epmps(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+
+	reg &= ~FUSB300_EPSET2_MPS_MSK;
+	reg |= FUSB300_EPSET2_MPS(info.maxpacket);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
+}
+
+static void fusb300_set_interval(struct fusb300 *fusb300,
+				 struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_INTERVAL(0x7);
+	reg |= FUSB300_EPSET1_INTERVAL(info.interval);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void fusb300_set_bwnum(struct fusb300 *fusb300,
+			      struct fusb300_ep_info info)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+
+	reg &= ~FUSB300_EPSET1_BWNUM(0x3);
+	reg |= FUSB300_EPSET1_BWNUM(info.bw_num);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
+}
+
+static void set_ep_reg(struct fusb300 *fusb300,
+		      struct fusb300_ep_info info)
+{
+	fusb300_set_eptype(fusb300, info);
+	fusb300_set_epdir(fusb300, info);
+	fusb300_set_epmps(fusb300, info);
+
+	if (info.interval)
+		fusb300_set_interval(fusb300, info);
+
+	if (info.bw_num)
+		fusb300_set_bwnum(fusb300, info);
+
+	fusb300_set_ep_active(fusb300, info.epnum);
+}
+
+static int config_ep(struct fusb300_ep *ep,
+		     const struct usb_endpoint_descriptor *desc)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	struct fusb300_ep_info info;
+
+	ep->desc = desc;
+
+	info.interval = 0;
+	info.addrofs = 0;
+	info.bw_num = 0;
+
+	info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
+	info.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+
+	if ((info.type == USB_ENDPOINT_XFER_INT) ||
+	   (info.type == USB_ENDPOINT_XFER_ISOC)) {
+		info.interval = desc->bInterval;
+		if (info.type == USB_ENDPOINT_XFER_ISOC)
+			info.bw_num = ((desc->wMaxPacketSize & 0x1800) >> 11);
+	}
+
+	ep_fifo_setting(fusb300, info);
+
+	set_ep_reg(fusb300, info);
+
+	fusb300_ep_setting(ep, info);
+
+	fusb300->ep[info.epnum] = ep;
+
+	return 0;
+}
+
+static int fusb300_enable(struct usb_ep *_ep,
+			  const struct usb_endpoint_descriptor *desc)
+{
+	struct fusb300_ep *ep;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	if (ep->fusb300->reenum) {
+		ep->fusb300->fifo_entry_num = 0;
+		ep->fusb300->addrofs = 0;
+		ep->fusb300->reenum = 0;
+	}
+
+	return config_ep(ep, desc);
+}
+
+static int fusb300_disable(struct usb_ep *_ep)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	BUG_ON(!ep);
+
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct fusb300_request, queue);
+		spin_lock_irqsave(&ep->fusb300->lock, flags);
+		done(ep, req, -ECONNRESET);
+		spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+	}
+
+	return fusb300_ep_release(ep);
+}
+
+static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep,
+						gfp_t gfp_flags)
+{
+	struct fusb300_request *req;
+
+	req = kzalloc(sizeof(struct fusb300_request), gfp_flags);
+	if (!req)
+		return NULL;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fusb300_request *req;
+
+	req = container_of(_req, struct fusb300_request, req);
+	kfree(req);
+}
+
+static int enable_fifo_int(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	if (ep->epnum) {
+		fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0,
+			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
+	} else {
+		pr_err("can't enable_fifo_int ep0\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int disable_fifo_int(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	if (ep->epnum) {
+		fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0,
+			FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
+	} else {
+		pr_err("can't disable_fifo_int ep0\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
+	reg &= ~FUSB300_CSR_LEN_MSK;
+	reg |= FUSB300_CSR_LEN(length);
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR);
+}
+
+/* write data to cx fifo */
+static void fusb300_wrcxf(struct fusb300_ep *ep,
+		   struct fusb300_request *req)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data;
+	struct fusb300 *fusb300 = ep->fusb300;
+	u32 length = req->req.length - req->req.actual;
+
+	tmp = req->req.buf + req->req.actual;
+
+	if (length > SS_CTL_MAX_PACKET_SIZE) {
+		fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE);
+		for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) {
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
+				*(tmp + 3) << 24;
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			tmp += 4;
+		}
+		req->req.actual += SS_CTL_MAX_PACKET_SIZE;
+	} else { /* length is less than max packet size */
+		fusb300_set_cxlen(fusb300, length);
+		for (i = length >> 2; i > 0; i--) {
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
+				*(tmp + 3) << 24;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			tmp = tmp + 4;
+		}
+		switch (length % 4) {
+		case 1:
+			data = *tmp;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		case 2:
+			data = *tmp | *(tmp + 1) << 8;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		case 3:
+			data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
+			printk(KERN_DEBUG "    0x%x\n", data);
+			iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
+			break;
+		default:
+			break;
+		}
+		req->req.actual += length;
+	}
+}
+
+static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
+		FUSB300_EPSET0_STL);
+}
+
+static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+
+	if (reg & FUSB300_EPSET0_STL) {
+		printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep);
+		reg &= ~FUSB300_EPSET0_STL;
+		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+	}
+}
+
+static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req)
+{
+	if (ep->fusb300->ep0_dir) { /* if IN */
+		if (req->req.length) {
+			fusb300_wrcxf(ep, req);
+		} else
+			printk(KERN_DEBUG "%s : req->req.length = 0x%x\n",
+				__func__, req->req.length);
+		if ((req->req.length == req->req.actual) ||
+		    (req->req.actual < ep->ep.maxpacket))
+			done(ep, req, 0);
+	} else { /* OUT */
+		if (!req->req.length)
+			done(ep, req, 0);
+		else
+			fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1,
+				FUSB300_IGER1_CX_OUT_INT);
+	}
+}
+
+static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req,
+			 gfp_t gfp_flags)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+	int request  = 0;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+	req = container_of(_req, struct fusb300_request, req);
+
+	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+
+	if (list_empty(&ep->queue))
+		request = 1;
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	req->req.actual = 0;
+	req->req.status = -EINPROGRESS;
+
+	if (ep->desc == NULL) /* ep0 */
+		ep0_queue(ep, req);
+	else if (request && !ep->stall)
+		enable_fifo_int(ep);
+
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+
+	return 0;
+}
+
+static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct fusb300_ep *ep;
+	struct fusb300_request *req;
+	unsigned long flags;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+	req = container_of(_req, struct fusb300_request, req);
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+	if (!list_empty(&ep->queue))
+		done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+
+	return 0;
+}
+
+static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge)
+{
+	struct fusb300_ep *ep;
+	struct fusb300 *fusb300;
+	unsigned long flags;
+	int ret = 0;
+
+	ep = container_of(_ep, struct fusb300_ep, ep);
+
+	fusb300 = ep->fusb300;
+
+	spin_lock_irqsave(&ep->fusb300->lock, flags);
+
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	if (value) {
+		fusb300_set_epnstall(fusb300, ep->epnum);
+		ep->stall = 1;
+		if (wedge)
+			ep->wedged = 1;
+	} else {
+		fusb300_clear_epnstall(fusb300, ep->epnum);
+		ep->stall = 0;
+		ep->wedged = 0;
+	}
+
+out:
+	spin_unlock_irqrestore(&ep->fusb300->lock, flags);
+	return ret;
+}
+
+static int fusb300_set_halt(struct usb_ep *_ep, int value)
+{
+	return fusb300_set_halt_and_wedge(_ep, value, 0);
+}
+
+static int fusb300_set_wedge(struct usb_ep *_ep)
+{
+	return fusb300_set_halt_and_wedge(_ep, 1, 1);
+}
+
+static void fusb300_fifo_flush(struct usb_ep *_ep)
+{
+}
+
+static struct usb_ep_ops fusb300_ep_ops = {
+	.enable		= fusb300_enable,
+	.disable	= fusb300_disable,
+
+	.alloc_request	= fusb300_alloc_request,
+	.free_request	= fusb300_free_request,
+
+	.queue		= fusb300_queue,
+	.dequeue	= fusb300_dequeue,
+
+	.set_halt	= fusb300_set_halt,
+	.fifo_flush	= fusb300_fifo_flush,
+	.set_wedge	= fusb300_set_wedge,
+};
+
+/*****************************************************************************/
+static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset,
+		       u32 value)
+{
+	iowrite32(value, fusb300->reg + offset);
+}
+
+static void fusb300_reset(void)
+{
+}
+
+static void fusb300_set_cxstall(struct fusb300 *fusb300)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
+			   FUSB300_CSR_STL);
+}
+
+static void fusb300_set_cxdone(struct fusb300 *fusb300)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
+			   FUSB300_CSR_DONE);
+}
+
+/* read data from cx fifo */
+void fusb300_rdcxf(struct fusb300 *fusb300,
+		   u8 *buffer, u32 length)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data;
+
+	tmp = buffer;
+
+	for (i = (length >> 2); i > 0; i--) {
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		*(tmp + 3) = (data >> 24) & 0xFF;
+		tmp = tmp + 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		break;
+	case 2:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		break;
+	case 3:
+		data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
+		printk(KERN_DEBUG "    0x%x\n", data);
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		break;
+	default:
+		break;
+	}
+}
+
+#if 0
+static void fusb300_dbg_fifo(struct fusb300_ep *ep,
+				u8 entry, u16 length)
+{
+	u32 reg;
+	u32 i = 0;
+	u32 j = 0;
+
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM);
+	reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) |
+		FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG);
+	reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) |
+		FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG);
+	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM);
+
+	for (i = 0; i < (length >> 2); i++) {
+		if (i * 4 == 1024)
+			break;
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i * 4);
+		printk(KERN_DEBUG"  0x%-8x", reg);
+		j++;
+		if ((j % 4)  == 0)
+			printk(KERN_DEBUG "\n");
+	}
+
+	if (length % 4) {
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i * 4);
+		printk(KERN_DEBUG "  0x%x\n", reg);
+	}
+
+	if ((j % 4)  != 0)
+		printk(KERN_DEBUG "\n");
+
+	fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM,
+		FUSB300_GTM_TST_FIFO_DEG);
+}
+
+static void fusb300_cmp_dbg_fifo(struct fusb300_ep *ep,
+				u8 entry, u16 length, u8 *golden)
+{
+	u32 reg;
+	u32 i = 0;
+	u32 golden_value;
+	u8 *tmp;
+
+	tmp = golden;
+
+	printk(KERN_DEBUG "fusb300_cmp_dbg_fifo (entry %d) : start\n", entry);
+
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM);
+	reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) |
+		FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG);
+	reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) |
+		FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG);
+	iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM);
+
+	for (i = 0; i < (length >> 2); i++) {
+		if (i * 4 == 1024)
+			break;
+		golden_value = *tmp | *(tmp + 1) << 8 |
+				*(tmp + 2) << 16 | *(tmp + 3) << 24;
+
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i*4);
+
+		if (reg != golden_value) {
+			printk(KERN_DEBUG "0x%x  :  ", (u32)(ep->fusb300->reg +
+				FUSB300_OFFSET_BUFDBG_START + i*4));
+			printk(KERN_DEBUG "    golden = 0x%x, reg = 0x%x\n",
+				golden_value, reg);
+		}
+		tmp += 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		golden_value = *tmp;
+	case 2:
+		golden_value = *tmp | *(tmp + 1) << 8;
+	case 3:
+		golden_value = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
+	default:
+		break;
+
+	reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_BUFDBG_START + i*4);
+	if (reg != golden_value) {
+		printk(KERN_DEBUG "0x%x:", (u32)(ep->fusb300->reg +
+			FUSB300_OFFSET_BUFDBG_START + i*4));
+		printk(KERN_DEBUG "  golden = 0x%x, reg = 0x%x\n",
+			golden_value, reg);
+	}
+	}
+
+	printk(KERN_DEBUG "fusb300_cmp_dbg_fifo : end\n");
+	fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM,
+		FUSB300_GTM_TST_FIFO_DEG);
+}
+#endif
+
+static void fusb300_rdfifo(struct fusb300_ep *ep,
+			  struct fusb300_request *req,
+			  u32 length)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data, reg;
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	tmp = req->req.buf + req->req.actual;
+	req->req.actual += length;
+
+	if (req->req.actual > req->req.length)
+		printk(KERN_DEBUG "req->req.actual > req->req.length\n");
+
+	for (i = (length >> 2); i > 0; i--) {
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		*(tmp + 3) = (data >> 24) & 0xFF;
+		tmp = tmp + 4;
+	}
+
+	switch (length % 4) {
+	case 1:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		break;
+	case 2:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		break;
+	case 3:
+		data = ioread32(fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		*tmp = data & 0xFF;
+		*(tmp + 1) = (data >> 8) & 0xFF;
+		*(tmp + 2) = (data >> 16) & 0xFF;
+		break;
+	default:
+		break;
+	}
+
+	do {
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+		reg &= FUSB300_IGR1_SYNF0_EMPTY_INT;
+		if (i)
+			printk(KERN_INFO "sync fifo is not empty!\n");
+		i++;
+	} while (!reg);
+}
+
+/* write data to fifo */
+static void fusb300_wrfifo(struct fusb300_ep *ep,
+			   struct fusb300_request *req)
+{
+	int i = 0;
+	u8 *tmp;
+	u32 data, reg;
+	struct fusb300 *fusb300 = ep->fusb300;
+
+	tmp = req->req.buf;
+	req->req.actual = req->req.length;
+
+	for (i = (req->req.length >> 2); i > 0; i--) {
+		data = *tmp | *(tmp + 1) << 8 |
+			*(tmp + 2) << 16 | *(tmp + 3) << 24;
+
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		tmp += 4;
+	}
+
+	switch (req->req.length % 4) {
+	case 1:
+		data = *tmp;
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		break;
+	case 2:
+		data = *tmp | *(tmp + 1) << 8;
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		break;
+	case 3:
+		data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
+		iowrite32(data, fusb300->reg +
+			FUSB300_OFFSET_EPPORT(ep->epnum));
+		break;
+	default:
+		break;
+	}
+
+	do {
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+		reg &= FUSB300_IGR1_SYNF0_EMPTY_INT;
+		if (i)
+			printk(KERN_INFO"sync fifo is not empty!\n");
+		i++;
+	} while (!reg);
+}
+
+static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep)
+{
+	u8 value;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
+
+	value = reg & FUSB300_EPSET0_STL;
+
+	return value;
+}
+
+static u8 fusb300_get_cxstall(struct fusb300 *fusb300)
+{
+	u8 value;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
+
+	value = (reg & FUSB300_CSR_STL) >> 1;
+
+	return value;
+}
+
+static void request_error(struct fusb300 *fusb300)
+{
+	fusb300_set_cxstall(fusb300);
+	printk(KERN_DEBUG "request error!!\n");
+}
+
+static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+__releases(fusb300->lock)
+__acquires(fusb300->lock)
+{
+	u8 ep;
+	u16 status = 0;
+	u16 w_index = ctrl->wIndex;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		break;
+	case USB_RECIP_INTERFACE:
+		status = 0;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = w_index & USB_ENDPOINT_NUMBER_MASK;
+		if (ep) {
+			if (fusb300_get_epnstall(fusb300, ep))
+				status = 1 << USB_ENDPOINT_HALT;
+		} else {
+			if (fusb300_get_cxstall(fusb300))
+				status = 0;
+		}
+		break;
+
+	default:
+		request_error(fusb300);
+		return;		/* exit */
+	}
+
+	fusb300->ep0_data = cpu_to_le16(status);
+	fusb300->ep0_req->buf = &fusb300->ep0_data;
+	fusb300->ep0_req->length = 2;
+
+	spin_unlock(&fusb300->lock);
+	fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL);
+	spin_lock(&fusb300->lock);
+}
+
+static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	u8 ep;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_INTERFACE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_ENDPOINT: {
+		u16 w_index = le16_to_cpu(ctrl->wIndex);
+
+		ep = w_index & USB_ENDPOINT_NUMBER_MASK;
+		if (ep)
+			fusb300_set_epnstall(fusb300, ep);
+		else
+			fusb300_set_cxstall(fusb300);
+		fusb300_set_cxdone(fusb300);
+		}
+		break;
+	default:
+		request_error(fusb300);
+		break;
+	}
+}
+
+static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep)
+{
+	fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
+			    FUSB300_EPSET0_CLRSEQNUM);
+}
+
+static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	struct fusb300_ep *ep =
+		fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK];
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_INTERFACE:
+		fusb300_set_cxdone(fusb300);
+		break;
+	case USB_RECIP_ENDPOINT:
+		if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) {
+			if (ep->wedged) {
+				fusb300_set_cxdone(fusb300);
+				break;
+			}
+			if (ep->stall) {
+				ep->stall = 0;
+				fusb300_clear_seqnum(fusb300, ep->epnum);
+				fusb300_clear_epnstall(fusb300, ep->epnum);
+				if (!list_empty(&ep->queue))
+					enable_fifo_int(ep);
+			}
+		}
+		fusb300_set_cxdone(fusb300);
+		break;
+	default:
+		request_error(fusb300);
+		break;
+	}
+}
+
+static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR);
+
+	reg &= ~FUSB300_DAR_DRVADDR_MSK;
+	reg |= FUSB300_DAR_DRVADDR(addr);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR);
+}
+
+static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	if (ctrl->wValue >= 0x0100)
+		request_error(fusb300);
+	else {
+		fusb300_set_dev_addr(fusb300, ctrl->wValue);
+		fusb300_set_cxdone(fusb300);
+	}
+}
+
+#define UVC_COPY_DESCRIPTORS(mem, src) \
+	do { \
+		const struct usb_descriptor_header * const *__src; \
+		for (__src = src; *__src; ++__src) { \
+			memcpy(mem, *__src, (*__src)->bLength); \
+			mem += (*__src)->bLength; \
+		} \
+	} while (0)
+
+static void fusb300_ep0_complete(struct usb_ep *ep,
+				struct usb_request *req)
+{
+}
+
+static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
+{
+	u8 *p = (u8 *)ctrl;
+	u8 ret = 0;
+	u8 i = 0;
+
+	fusb300_rdcxf(fusb300, p, 8);
+	fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN;
+	fusb300->ep0_length = ctrl->wLength;
+
+	/* check request */
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_GET_STATUS:
+			get_status(fusb300, ctrl);
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			clear_feature(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_FEATURE:
+			set_feature(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_ADDRESS:
+			set_address(fusb300, ctrl);
+			break;
+		case USB_REQ_SET_CONFIGURATION:
+			fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR,
+					   FUSB300_DAR_SETCONFG);
+			/* clear sequence number */
+			for (i = 1; i <= FUSB300_MAX_NUM_EP; i++)
+				fusb300_clear_seqnum(fusb300, i);
+			fusb300->reenum = 1;
+			ret = 1;
+			break;
+		default:
+			ret = 1;
+			break;
+		}
+	} else
+		ret = 1;
+
+	return ret;
+}
+
+static void fusb300_set_ep_bycnt(struct fusb300_ep *ep, u32 bycnt)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
+
+	reg &= ~FUSB300_FFR_BYCNT;
+	reg |= bycnt & FUSB300_FFR_BYCNT;
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
+}
+
+static void done(struct fusb300_ep *ep, struct fusb300_request *req,
+		 int status)
+{
+	list_del_init(&req->queue);
+
+	/* don't modify queue heads during completion callback */
+	if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
+		req->req.status = -ESHUTDOWN;
+	else
+		req->req.status = status;
+
+	spin_unlock(&ep->fusb300->lock);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&ep->fusb300->lock);
+
+	if (ep->epnum) {
+		disable_fifo_int(ep);
+		if (!list_empty(&ep->queue))
+			enable_fifo_int(ep);
+	} else
+		fusb300_set_cxdone(ep->fusb300);
+}
+
+void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep,
+			struct fusb300_request *req)
+{
+	u32 value;
+	u32 reg;
+
+	/* wait SW owner */
+	do {
+		reg = ioread32(ep->fusb300->reg +
+			FUSB300_OFFSET_EPPRD_W0(ep->epnum));
+		reg &= FUSB300_EPPRD0_H;
+	} while (reg);
+
+	iowrite32((u32) req->req.buf, ep->fusb300->reg +
+		FUSB300_OFFSET_EPPRD_W1(ep->epnum));
+
+	value = FUSB300_EPPRD0_BTC(req->req.length) | FUSB300_EPPRD0_H |
+		FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I;
+	iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum));
+
+	iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum));
+
+	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY,
+		FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum));
+}
+
+static void fusb300_wait_idma_finished(struct fusb300_ep *ep)
+{
+	u32 reg;
+
+	do {
+		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1);
+		if ((reg & FUSB300_IGR1_VBUS_CHG_INT) ||
+		    (reg & FUSB300_IGR1_WARM_RST_INT) ||
+		    (reg & FUSB300_IGR1_HOT_RST_INT) ||
+		    (reg & FUSB300_IGR1_USBRST_INT)
+		)
+			goto IDMA_RESET;
+		reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0);
+		reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum);
+	} while (!reg);
+
+	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0,
+		FUSB300_IGR0_EPn_PRD_INT(ep->epnum));
+IDMA_RESET:
+	fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0,
+		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
+}
+
+static void  fusb300_set_idma(struct fusb300_ep *ep,
+			struct fusb300_request *req)
+{
+	dma_addr_t d;
+	u8 *tmp = NULL;
+
+	d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE);
+
+	if (dma_mapping_error(NULL, d)) {
+		kfree(req->req.buf);
+		printk(KERN_DEBUG "dma_mapping_error\n");
+	}
+
+	dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE);
+
+	fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0,
+		FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
+
+	tmp = req->req.buf;
+	req->req.buf = (u8 *)d;
+
+	fusb300_fill_idma_prdtbl(ep, req);
+	/* check idma is done */
+	fusb300_wait_idma_finished(ep);
+
+	req->req.buf = tmp;
+
+	if (d)
+		dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE);
+}
+
+static void in_ep_fifo_handler(struct fusb300_ep *ep)
+{
+	struct fusb300_request *req = list_entry(ep->queue.next,
+					struct fusb300_request, queue);
+
+	if (req->req.length) {
+#if 0
+		fusb300_set_ep_bycnt(ep, req->req.length);
+		fusb300_wrfifo(ep, req);
+#else
+		fusb300_set_idma(ep, req);
+#endif
+	}
+	done(ep, req, 0);
+}
+
+static void out_ep_fifo_handler(struct fusb300_ep *ep)
+{
+	struct fusb300 *fusb300 = ep->fusb300;
+	struct fusb300_request *req = list_entry(ep->queue.next,
+						 struct fusb300_request, queue);
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
+	u32 length = reg & FUSB300_FFR_BYCNT;
+
+	fusb300_rdfifo(ep, req, length);
+
+	/* finish out transfer */
+	if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket))
+		done(ep, req, 0);
+}
+
+static void check_device_mode(struct fusb300 *fusb300)
+{
+	u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR);
+
+	switch (reg & FUSB300_GCR_DEVEN_MSK) {
+	case FUSB300_GCR_DEVEN_SS:
+		fusb300->gadget.speed = USB_SPEED_SUPER;
+		break;
+	case FUSB300_GCR_DEVEN_HS:
+		fusb300->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case FUSB300_GCR_DEVEN_FS:
+		fusb300->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		fusb300->gadget.speed = USB_SPEED_UNKNOWN;
+		break;
+	}
+	printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK));
+}
+
+
+static void fusb300_ep0out(struct fusb300 *fusb300)
+{
+	struct fusb300_ep *ep = fusb300->ep[0];
+	u32 reg;
+
+	if (!list_empty(&ep->queue)) {
+		struct fusb300_request *req;
+
+		req = list_first_entry(&ep->queue,
+			struct fusb300_request, queue);
+		if (req->req.length)
+			fusb300_rdcxf(ep->fusb300, req->req.buf,
+				req->req.length);
+		done(ep, req, 0);
+		reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
+		reg &= ~FUSB300_IGER1_CX_OUT_INT;
+		iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1);
+	} else
+		pr_err("%s : empty queue\n", __func__);
+}
+
+static void fusb300_ep0in(struct fusb300 *fusb300)
+{
+	struct fusb300_request *req;
+	struct fusb300_ep *ep = fusb300->ep[0];
+
+	if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) {
+		req = list_entry(ep->queue.next,
+				struct fusb300_request, queue);
+		if (req->req.length)
+			fusb300_wrcxf(ep, req);
+		if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
+			done(ep, req, 0);
+	} else
+		fusb300_set_cxdone(fusb300);
+}
+
+static void fusb300_grp2_handler(void)
+{
+}
+
+static void fusb300_grp3_handler(void)
+{
+}
+
+static void fusb300_grp4_handler(void)
+{
+}
+
+static void fusb300_grp5_handler(void)
+{
+}
+
+static irqreturn_t fusb300_irq(int irq, void *_fusb300)
+{
+	struct fusb300 *fusb300 = _fusb300;
+	u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
+	u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
+	u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0);
+	u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0);
+	struct usb_ctrlrequest ctrl;
+	u8 in;
+	u32 reg;
+	int i;
+
+	spin_lock(&fusb300->lock);
+
+	int_grp1 &= int_grp1_en;
+	int_grp0 &= int_grp0_en;
+
+	if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_WARM_RST_INT);
+		printk(KERN_INFO"fusb300_warmreset\n");
+		fusb300_reset();
+	}
+
+	if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_HOT_RST_INT);
+		printk(KERN_INFO"fusb300_hotreset\n");
+		fusb300_reset();
+	}
+
+	if (int_grp1 & FUSB300_IGR1_USBRST_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_USBRST_INT);
+		fusb300_reset();
+	}
+	/* COMABT_INT has a highest priority */
+
+	if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_CX_COMABT_INT);
+		printk(KERN_INFO"fusb300_ep0abt\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_VBUS_CHG_INT);
+		printk(KERN_INFO"fusb300_vbus_change\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_EXIT_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_ENTRY_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_ENTRY_FAIL_INT);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_EXIT_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U3_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n");
+		fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1,
+				   FUSB300_SSCR1_GO_U3_DONE);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U2_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_U1_ENTRY_INT);
+		printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_RESM_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_RESM_INT);
+		printk(KERN_INFO "fusb300_resume\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_SUSP_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_SUSP_INT);
+		printk(KERN_INFO "fusb300_suspend\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_HS_LPM_INT);
+		printk(KERN_INFO "fusb300_HS_LPM_INT\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) {
+		fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
+				  FUSB300_IGR1_DEV_MODE_CHG_INT);
+		check_device_mode(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) {
+		fusb300_set_cxstall(fusb300);
+		printk(KERN_INFO "fusb300_ep0fail\n");
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) {
+		printk(KERN_INFO "fusb300_ep0setup\n");
+		if (setup_packet(fusb300, &ctrl)) {
+			spin_unlock(&fusb300->lock);
+			if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0)
+				fusb300_set_cxstall(fusb300);
+			spin_lock(&fusb300->lock);
+		}
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT)
+		printk(KERN_INFO "fusb300_cmdend\n");
+
+
+	if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) {
+		printk(KERN_INFO "fusb300_cxout\n");
+		fusb300_ep0out(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_CX_IN_INT) {
+		printk(KERN_INFO "fusb300_cxin\n");
+		fusb300_ep0in(fusb300);
+	}
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP5)
+		fusb300_grp5_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP4)
+		fusb300_grp4_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP3)
+		fusb300_grp3_handler();
+
+	if (int_grp1 & FUSB300_IGR1_INTGRP2)
+		fusb300_grp2_handler();
+
+	if (int_grp0) {
+		for (i = 1; i < FUSB300_MAX_NUM_EP; i++) {
+			if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) {
+				reg = ioread32(fusb300->reg +
+					FUSB300_OFFSET_EPSET1(i));
+				in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0;
+				if (in)
+					in_ep_fifo_handler(fusb300->ep[i]);
+				else
+					out_ep_fifo_handler(fusb300->ep[i]);
+			}
+		}
+	}
+
+	spin_unlock(&fusb300->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void fusb300_set_u2_timeout(struct fusb300 *fusb300,
+				   u32 time)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
+	reg &= ~0xff;
+	reg |= FUSB300_SSCR2_U2TIMEOUT(time);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
+}
+
+static void fusb300_set_u1_timeout(struct fusb300 *fusb300,
+				   u32 time)
+{
+	u32 reg;
+
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
+	reg &= ~(0xff << 8);
+	reg |= FUSB300_SSCR2_U1TIMEOUT(time);
+
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
+}
+
+static void init_controller(struct fusb300 *fusb300)
+{
+	u32 reg;
+	u32 mask = 0;
+	u32 val = 0;
+
+	/* split on */
+	mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR);
+	reg &= ~mask;
+	reg |= val;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR);
+
+	/* enable high-speed LPM */
+	mask = val = FUSB300_HSCR_HS_LPM_PERMIT;
+	reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR);
+	reg &= ~mask;
+	reg |= val;
+	iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR);
+
+	/*set u1 u2 timmer*/
+	fusb300_set_u2_timeout(fusb300, 0xff);
+	fusb300_set_u1_timeout(fusb300, 0xff);
+
+	/* enable all grp1 interrupt */
+	iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1);
+}
+/*------------------------------------------------------------------------*/
+static struct fusb300 *the_controller;
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *))
+{
+	struct fusb300 *fusb300 = the_controller;
+	int retval;
+
+	if (!driver
+			|| driver->speed < USB_SPEED_FULL
+			|| !bind
+			|| !driver->setup)
+		return -EINVAL;
+
+	if (!fusb300)
+		return -ENODEV;
+
+	if (fusb300->driver)
+		return -EBUSY;
+
+	/* hook up the driver */
+	driver->driver.bus = NULL;
+	fusb300->driver = driver;
+	fusb300->gadget.dev.driver = &driver->driver;
+
+	retval = device_add(&fusb300->gadget.dev);
+	if (retval) {
+		pr_err("device_add error (%d)\n", retval);
+		goto error;
+	}
+
+	retval = bind(&fusb300->gadget);
+	if (retval) {
+		pr_err("bind to driver error (%d)\n", retval);
+		device_del(&fusb300->gadget.dev);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	fusb300->driver = NULL;
+	fusb300->gadget.dev.driver = NULL;
+
+	return retval;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct fusb300 *fusb300 = the_controller;
+
+	if (driver != fusb300->driver || !driver->unbind)
+		return -EINVAL;
+
+	driver->unbind(&fusb300->gadget);
+	fusb300->gadget.dev.driver = NULL;
+
+	init_controller(fusb300);
+	device_del(&fusb300->gadget.dev);
+	fusb300->driver = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+/*--------------------------------------------------------------------------*/
+
+static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+	return 0;
+}
+
+static struct usb_gadget_ops fusb300_gadget_ops = {
+	.pullup		= fusb300_udc_pullup,
+};
+
+static int __exit fusb300_remove(struct platform_device *pdev)
+{
+	struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev);
+
+	iounmap(fusb300->reg);
+	free_irq(platform_get_irq(pdev, 0), fusb300);
+
+	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	kfree(fusb300);
+
+	return 0;
+}
+
+static int __init fusb300_probe(struct platform_device *pdev)
+{
+	struct resource *res, *ires, *ires1;
+	void __iomem *reg = NULL;
+	struct fusb300 *fusb300 = NULL;
+	struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP];
+	int ret = 0;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		pr_err("platform_get_resource error.\n");
+		goto clean_up;
+	}
+
+	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!ires) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ error.\n");
+		goto clean_up;
+	}
+
+	ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	if (!ires1) {
+		ret = -ENODEV;
+		dev_err(&pdev->dev,
+			"platform_get_resource IORESOURCE_IRQ 1 error.\n");
+		goto clean_up;
+	}
+
+	reg = ioremap(res->start, resource_size(res));
+	if (reg == NULL) {
+		ret = -ENOMEM;
+		pr_err("ioremap error.\n");
+		goto clean_up;
+	}
+
+	/* initialize udc */
+	fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL);
+	if (fusb300 == NULL) {
+		pr_err("kzalloc error\n");
+		goto clean_up;
+	}
+
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++) {
+		_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL);
+		if (_ep[i] == NULL) {
+			pr_err("_ep kzalloc error\n");
+			goto clean_up;
+		}
+		fusb300->ep[i] = _ep[i];
+	}
+
+	spin_lock_init(&fusb300->lock);
+
+	dev_set_drvdata(&pdev->dev, fusb300);
+
+	fusb300->gadget.ops = &fusb300_gadget_ops;
+
+	device_initialize(&fusb300->gadget.dev);
+
+	dev_set_name(&fusb300->gadget.dev, "gadget");
+
+	fusb300->gadget.is_dualspeed = 1;
+	fusb300->gadget.dev.parent = &pdev->dev;
+	fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	fusb300->gadget.dev.release = pdev->dev.release;
+	fusb300->gadget.name = udc_name;
+	fusb300->reg = reg;
+
+	ret = request_irq(ires->start, fusb300_irq, IRQF_DISABLED | IRQF_SHARED,
+			  udc_name, fusb300);
+	if (ret < 0) {
+		pr_err("request_irq error (%d)\n", ret);
+		goto clean_up;
+	}
+
+	ret = request_irq(ires1->start, fusb300_irq,
+			IRQF_DISABLED | IRQF_SHARED, udc_name, fusb300);
+	if (ret < 0) {
+		pr_err("request_irq1 error (%d)\n", ret);
+		goto clean_up;
+	}
+
+	INIT_LIST_HEAD(&fusb300->gadget.ep_list);
+
+	for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) {
+		struct fusb300_ep *ep = fusb300->ep[i];
+
+		if (i != 0) {
+			INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list);
+			list_add_tail(&fusb300->ep[i]->ep.ep_list,
+				     &fusb300->gadget.ep_list);
+		}
+		ep->fusb300 = fusb300;
+		INIT_LIST_HEAD(&ep->queue);
+		ep->ep.name = fusb300_ep_name[i];
+		ep->ep.ops = &fusb300_ep_ops;
+		ep->ep.maxpacket = HS_BULK_MAX_PACKET_SIZE;
+	}
+	fusb300->ep[0]->ep.maxpacket = HS_CTL_MAX_PACKET_SIZE;
+	fusb300->ep[0]->epnum = 0;
+	fusb300->gadget.ep0 = &fusb300->ep[0]->ep;
+	INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list);
+
+	the_controller = fusb300;
+
+	fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
+				GFP_KERNEL);
+	if (fusb300->ep0_req == NULL)
+		goto clean_up3;
+
+	init_controller(fusb300);
+	dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
+
+	return 0;
+
+clean_up3:
+	free_irq(ires->start, fusb300);
+
+clean_up:
+	if (fusb300) {
+		if (fusb300->ep0_req)
+			fusb300_free_request(&fusb300->ep[0]->ep,
+				fusb300->ep0_req);
+		kfree(fusb300);
+	}
+	if (reg)
+		iounmap(reg);
+
+	return ret;
+}
+
+static struct platform_driver fusb300_driver = {
+	.remove =	__exit_p(fusb300_remove),
+	.driver		= {
+		.name =	(char *) udc_name,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init fusb300_udc_init(void)
+{
+	return platform_driver_probe(&fusb300_driver, fusb300_probe);
+}
+
+module_init(fusb300_udc_init);
+
+static void __exit fusb300_udc_cleanup(void)
+{
+	platform_driver_unregister(&fusb300_driver);
+}
+module_exit(fusb300_udc_cleanup);

drivers/usb/gadget/fusb300_udc.h

+/*
+ * Fusb300 UDC (USB gadget)
+ *
+ * Copyright (C) 2010 Faraday Technology Corp.
+ *
+ * Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+
+#ifndef __FUSB300_UDC_H__
+#define __FUSB300_UDC_H_
+
+#include <linux/kernel.h>
+
+#define FUSB300_OFFSET_GCR		0x00
+#define FUSB300_OFFSET_GTM		0x04
+#define FUSB300_OFFSET_DAR		0x08
+#define FUSB300_OFFSET_CSR		0x0C
+#define FUSB300_OFFSET_CXPORT		0x10
+#define FUSB300_OFFSET_EPSET0(n)	(0x20 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSET1(n)	(0x24 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSET2(n)	(0x28 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPFFR(n)		(0x2c + (n - 1) * 0x30)
+#define FUSB300_OFFSET_EPSTRID(n)	(0x40 + (n - 1) * 0x30)
+#define FUSB300_OFFSET_HSPTM		0x300
+#define FUSB300_OFFSET_HSCR		0x304
+#define FUSB300_OFFSET_SSCR0		0x308
+#define FUSB300_OFFSET_SSCR1		0x30C
+#define FUSB300_OFFSET_TT		0x310
+#define FUSB300_OFFSET_DEVNOTF		0x314
+#define FUSB300_OFFSET_DNC1		0x318
+#define FUSB300_OFFSET_CS		0x31C
+#define FUSB300_OFFSET_SOF		0x324
+#define FUSB300_OFFSET_EFCS		0x328
+#define FUSB300_OFFSET_IGR0		0x400
+#define FUSB300_OFFSET_IGR1		0x404
+#define FUSB300_OFFSET_IGR2		0x408
+#define FUSB300_OFFSET_IGR3		0x40C
+#define FUSB300_OFFSET_IGR4		0x410
+#define FUSB300_OFFSET_IGR5		0x414
+#define FUSB300_OFFSET_IGER0		0x420
+#define FUSB300_OFFSET_IGER1		0x424
+#define FUSB300_OFFSET_IGER2		0x428
+#define FUSB300_OFFSET_IGER3		0x42C
+#define FUSB300_OFFSET_IGER4		0x430
+#define FUSB300_OFFSET_IGER5		0x434
+#define FUSB300_OFFSET_DMAHMER		0x500
+#define FUSB300_OFFSET_EPPRDRDY		0x504
+#define FUSB300_OFFSET_DMAEPMR		0x508
+#define FUSB300_OFFSET_DMAENR		0x50C
+#define FUSB300_OFFSET_DMAAPR		0x510
+#define FUSB300_OFFSET_AHBCR		0x514
+#define FUSB300_OFFSET_EPPRD_W0(n)	(0x520 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPPRD_W1(n)	(0x524 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPPRD_W2(n)	(0x528 + (n - 1) * 0x10)
+#define FUSB300_OFFSET_EPRD_PTR(n)	(0x52C + (n - 1) * 0x10)
+#define FUSB300_OFFSET_BUFDBG_START	0x800
+#define FUSB300_OFFSET_BUFDBG_END	0xBFC
+#define FUSB300_OFFSET_EPPORT(n)	(0x1010 + (n - 1) * 0x10)
+
+/*
+ * *	Global Control Register (offset = 000H)
+ * */
+#define FUSB300_GCR_SF_RST		(1 << 8)
+#define FUSB300_GCR_VBUS_STATUS		(1 << 7)
+#define FUSB300_GCR_FORCE_HS_SUSP	(1 << 6)
+#define FUSB300_GCR_SYNC_FIFO1_CLR	(1 << 5)
+#define FUSB300_GCR_SYNC_FIFO0_CLR	(1 << 4)
+#define FUSB300_GCR_FIFOCLR		(1 << 3)
+#define FUSB300_GCR_GLINTEN		(1 << 2)
+#define FUSB300_GCR_DEVEN_FS		0x3
+#define FUSB300_GCR_DEVEN_HS		0x2
+#define FUSB300_GCR_DEVEN_SS		0x1
+#define FUSB300_GCR_DEVDIS		0x0
+#define FUSB300_GCR_DEVEN_MSK		0x3
+
+
+/*
+ * *Global Test Mode (offset = 004H)
+ * */
+#define FUSB300_GTM_TST_DIS_SOFGEN	(1 << 16)
+#define FUSB300_GTM_TST_CUR_EP_ENTRY(n)	((n & 0xF) << 12)
+#define FUSB300_GTM_TST_EP_ENTRY(n)	((n & 0xF) << 8)
+#define FUSB300_GTM_TST_EP_NUM(n)	((n & 0xF) << 4)
+#define FUSB300_GTM_TST_FIFO_DEG	(1 << 1)
+#define FUSB300_GTM_TSTMODE		(1 << 0)
+
+/*
+ * * Device Address Register (offset = 008H)
+ * */
+#define FUSB300_DAR_SETCONFG	(1 << 7)
+#define FUSB300_DAR_DRVADDR(x)	(x & 0x7F)
+#define FUSB300_DAR_DRVADDR_MSK	0x7F
+
+/*
+ * *Control Transfer Configuration and Status Register
+ * (CX_Config_Status, offset = 00CH)
+ * */
+#define FUSB300_CSR_LEN(x)	((x & 0xFFFF) << 8)
+#define FUSB300_CSR_LEN_MSK	(0xFFFF << 8)
+#define FUSB300_CSR_EMP		(1 << 4)
+#define FUSB300_CSR_FUL		(1 << 3)
+#define FUSB300_CSR_CLR		(1 << 2)
+#define FUSB300_CSR_STL		(1 << 1)
+#define FUSB300_CSR_DONE	(1 << 0)
+
+/*
+ * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 )
+ * */
+#define FUSB300_EPSET0_CLRSEQNUM	(1 << 2)
+#define FUSB300_EPSET0_EPn_TX0BYTE	(1 << 1)
+#define FUSB300_EPSET0_STL		(1 << 0)
+
+/*
+ * * EPn Setting 1 (EPn_SET1, offset = 024H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_EPSET1_START_ENTRY(x)	((x & 0xFF) << 24)
+#define FUSB300_EPSET1_START_ENTRY_MSK	(0xFF << 24)
+#define FUSB300_EPSET1_FIFOENTRY(x)	((x & 0x1F) << 12)
+#define FUSB300_EPSET1_FIFOENTRY_MSK	(0x1f << 12)
+#define FUSB300_EPSET1_INTERVAL(x)	((x & 0x7) << 6)
+#define FUSB300_EPSET1_BWNUM(x)		((x & 0x3) << 4)
+#define FUSB300_EPSET1_TYPEISO		(1 << 2)
+#define FUSB300_EPSET1_TYPEBLK		(2 << 2)
+#define FUSB300_EPSET1_TYPEINT		(3 << 2)
+#define FUSB300_EPSET1_TYPE(x)		((x & 0x3) << 2)
+#define FUSB300_EPSET1_TYPE_MSK		(0x3 << 2)
+#define FUSB300_EPSET1_DIROUT		(0 << 1)
+#define FUSB300_EPSET1_DIRIN		(1 << 1)
+#define FUSB300_EPSET1_DIR(x)		((x & 0x1) << 1)
+#define FUSB300_EPSET1_DIRIN		(1 << 1)
+#define FUSB300_EPSET1_DIR_MSK		((0x1) << 1)
+#define FUSB300_EPSET1_ACTDIS		0
+#define FUSB300_EPSET1_ACTEN		1
+
+/*
+ * *EPn Setting 2 (EPn_SET2, offset = 028H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_EPSET2_ADDROFS(x)	((x & 0x7FFF) << 16)
+#define FUSB300_EPSET2_ADDROFS_MSK	(0x7fff << 16)
+#define FUSB300_EPSET2_MPS(x)		(x & 0x7FF)
+#define FUSB300_EPSET2_MPS_MSK		0x7FF
+
+/*
+ * * EPn FIFO Register (offset = 2cH+(n-1)*30H)
+ * */
+#define FUSB300_FFR_RST		(1 << 31)
+#define FUSB300_FF_FUL		(1 << 30)
+#define FUSB300_FF_EMPTY	(1 << 29)
+#define FUSB300_FFR_BYCNT	0x1FFFF
+
+/*
+ * *EPn Stream ID (EPn_STR_ID, offset = 040H+(n-1)*30H, n=1~15)
+ * */
+#define FUSB300_STRID_STREN	(1 << 16)
+#define FUSB300_STRID_STRID(x)	(x & 0xFFFF)
+
+/*
+ * *HS PHY Test Mode (offset = 300H)
+ * */
+#define FUSB300_HSPTM_TSTPKDONE		(1 << 4)
+#define FUSB300_HSPTM_TSTPKT		(1 << 3)
+#define FUSB300_HSPTM_TSTSET0NAK	(1 << 2)
+#define FUSB300_HSPTM_TSTKSTA		(1 << 1)
+#define FUSB300_HSPTM_TSTJSTA		(1 << 0)
+
+/*
+ * *HS Control Register (offset = 304H)
+ * */
+#define FUSB300_HSCR_HS_LPM_PERMIT	(1 << 8)
+#define FUSB300_HSCR_HS_LPM_RMWKUP	(1 << 7)
+#define FUSB300_HSCR_CAP_LPM_RMWKUP	(1 << 6)
+#define FUSB300_HSCR_HS_GOSUSP		(1 << 5)
+#define FUSB300_HSCR_HS_GORMWKU		(1 << 4)
+#define FUSB300_HSCR_CAP_RMWKUP		(1 << 3)
+#define FUSB300_HSCR_IDLECNT_0MS	0
+#define FUSB300_HSCR_IDLECNT_1MS	1
+#define FUSB300_HSCR_IDLECNT_2MS	2
+#define FUSB300_HSCR_IDLECNT_3MS	3
+#define FUSB300_HSCR_IDLECNT_4MS	4
+#define FUSB300_HSCR_IDLECNT_5MS	5
+#define FUSB300_HSCR_IDLECNT_6MS	6
+#define FUSB300_HSCR_IDLECNT_7MS	7
+
+/*
+ * * SS Controller Register 0 (offset = 308H)
+ * */
+#define FUSB300_SSCR0_MAX_INTERVAL(x)	((x & 0x7) << 4)
+#define FUSB300_SSCR0_U2_FUN_EN		(1 << 1)
+#define FUSB300_SSCR0_U1_FUN_EN		(1 << 0)
+
+/*
+ * * SS Controller Register 1 (offset = 30CH)
+ * */
+#define FUSB300_SSCR1_GO_U3_DONE	(1 << 8)
+#define FUSB300_SSCR1_TXDEEMPH_LEVEL	(1 << 7)
+#define FUSB300_SSCR1_DIS_SCRMB		(1 << 6)
+#define FUSB300_SSCR1_FORCE_RECOVERY	(1 << 5)
+#define FUSB300_SSCR1_U3_WAKEUP_EN	(1 << 4)
+#define FUSB300_SSCR1_U2_EXIT_EN	(1 << 3)
+#define FUSB300_SSCR1_U1_EXIT_EN	(1 << 2)
+#define FUSB300_SSCR1_U2_ENTRY_EN	(1 << 1)
+#define FUSB300_SSCR1_U1_ENTRY_EN	(1 << 0)
+
+/*
+ * *SS Controller Register 2  (offset = 310H)
+ * */
+#define FUSB300_SSCR2_SS_TX_SWING		(1 << 25)
+#define FUSB300_SSCR2_FORCE_LINKPM_ACCEPT	(1 << 24)
+#define FUSB300_SSCR2_U2_INACT_TIMEOUT(x)	((x & 0xFF) << 16)
+#define FUSB300_SSCR2_U1TIMEOUT(x)		((x & 0xFF) << 8)
+#define FUSB300_SSCR2_U2TIMEOUT(x)		(x & 0xFF)
+
+/*
+ * *SS Device Notification Control (DEV_NOTF, offset = 314H)
+ * */
+#define FUSB300_DEVNOTF_CONTEXT0(x)		((x & 0xFFFFFF) << 8)
+#define FUSB300_DEVNOTF_TYPE_DIS		0
+#define FUSB300_DEVNOTF_TYPE_FUNCWAKE		1
+#define FUSB300_DEVNOTF_TYPE_LTM		2
+#define FUSB300_DEVNOTF_TYPE_BUSINT_ADJMSG	3
+
+/*
+ * *BFM Arbiter Priority Register (BFM_ARB offset = 31CH)
+ * */
+#define FUSB300_BFMARB_ARB_M1	(1 << 3)
+#define FUSB300_BFMARB_ARB_M0	(1 << 2)
+#define FUSB300_BFMARB_ARB_S1	(1 << 1)
+#define FUSB300_BFMARB_ARB_S0	1
+
+/*
+ * *Vendor Specific IO Control Register (offset = 320H)
+ * */
+#define FUSB300_VSIC_VCTLOAD_N	(1 << 8)
+#define FUSB300_VSIC_VCTL(x)	(x & 0x3F)
+
+/*
+ * *SOF Mask Timer (offset = 324H)
+ * */
+#define FUSB300_SOF_MASK_TIMER_HS	0x044c
+#define FUSB300_SOF_MASK_TIMER_FS	0x2710
+
+/*
+ * *Error Flag and Control Status (offset = 328H)
+ * */
+#define FUSB300_EFCS_PM_STATE_U3	3
+#define FUSB300_EFCS_PM_STATE_U2	2
+#define FUSB300_EFCS_PM_STATE_U1	1
+#define FUSB300_EFCS_PM_STATE_U0	0
+
+/*
+ * *Interrupt Group 0 Register (offset = 400H)
+ * */
+#define FUSB300_IGR0_EP15_PRD_INT	(1 << 31)
+#define FUSB300_IGR0_EP14_PRD_INT	(1 << 30)
+#define FUSB300_IGR0_EP13_PRD_INT	(1 << 29)
+#define FUSB300_IGR0_EP12_PRD_INT	(1 << 28)
+#define FUSB300_IGR0_EP11_PRD_INT	(1 << 27)
+#define FUSB300_IGR0_EP10_PRD_INT	(1 << 26)
+#define FUSB300_IGR0_EP9_PRD_INT	(1 << 25)
+#define FUSB300_IGR0_EP8_PRD_INT	(1 << 24)
+#define FUSB300_IGR0_EP7_PRD_INT	(1 << 23)
+#define FUSB300_IGR0_EP6_PRD_INT	(1 << 22)
+#define FUSB300_IGR0_EP5_PRD_INT	(1 << 21)
+#define FUSB300_IGR0_EP4_PRD_INT	(1 << 20)
+#define FUSB300_IGR0_EP3_PRD_INT	(1 << 19)
+#define FUSB300_IGR0_EP2_PRD_INT	(1 << 18)
+#define FUSB300_IGR0_EP1_PRD_INT	(1 << 17)
+#define FUSB300_IGR0_EPn_PRD_INT(n)	(1 << (n + 16))
+
+#define FUSB300_IGR0_EP15_FIFO_INT	(1 << 15)
+#define FUSB300_IGR0_EP14_FIFO_INT	(1 << 14)
+#define FUSB300_IGR0_EP13_FIFO_INT	(1 << 13)
+#define FUSB300_IGR0_EP12_FIFO_INT	(1 << 12)
+#define FUSB300_IGR0_EP11_FIFO_INT	(1 << 11)
+#define FUSB300_IGR0_EP10_FIFO_INT	(1 << 10)
+#define FUSB300_IGR0_EP9_FIFO_INT	(1 << 9)
+#define FUSB300_IGR0_EP8_FIFO_INT	(1 << 8)
+#define FUSB300_IGR0_EP7_FIFO_INT	(1 << 7)
+#define FUSB300_IGR0_EP6_FIFO_INT	(1 << 6)
+#define FUSB300_IGR0_EP5_FIFO_INT	(1 << 5)
+#define FUSB300_IGR0_EP4_FIFO_INT	(1 << 4)
+#define FUSB300_IGR0_EP3_FIFO_INT	(1 << 3)
+#define FUSB300_IGR0_EP2_FIFO_INT	(1 << 2)
+#define FUSB300_IGR0_EP1_FIFO_INT	(1 << 1)
+#define FUSB300_IGR0_EPn_FIFO_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Group 1 Register (offset = 404H)
+ * */
+#define FUSB300_IGR1_INTGRP5		(1 << 31)
+#define FUSB300_IGR1_VBUS_CHG_INT	(1 << 30)
+#define FUSB300_IGR1_SYNF1_EMPTY_INT	(1 << 29)
+#define FUSB300_IGR1_SYNF0_EMPTY_INT	(1 << 28)
+#define FUSB300_IGR1_U3_EXIT_FAIL_INT	(1 << 27)
+#define FUSB300_IGR1_U2_EXIT_FAIL_INT	(1 << 26)
+#define FUSB300_IGR1_U1_EXIT_FAIL_INT	(1 << 25)
+#define FUSB300_IGR1_U2_ENTRY_FAIL_INT	(1 << 24)
+#define FUSB300_IGR1_U1_ENTRY_FAIL_INT	(1 << 23)
+#define FUSB300_IGR1_U3_EXIT_INT	(1 << 22)
+#define FUSB300_IGR1_U2_EXIT_INT	(1 << 21)
+#define FUSB300_IGR1_U1_EXIT_INT	(1 << 20)
+#define FUSB300_IGR1_U3_ENTRY_INT	(1 << 19)
+#define FUSB300_IGR1_U2_ENTRY_INT	(1 << 18)
+#define FUSB300_IGR1_U1_ENTRY_INT	(1 << 17)
+#define FUSB300_IGR1_HOT_RST_INT	(1 << 16)
+#define FUSB300_IGR1_WARM_RST_INT	(1 << 15)
+#define FUSB300_IGR1_RESM_INT		(1 << 14)
+#define FUSB300_IGR1_SUSP_INT		(1 << 13)
+#define FUSB300_IGR1_HS_LPM_INT		(1 << 12)
+#define FUSB300_IGR1_USBRST_INT		(1 << 11)
+#define FUSB300_IGR1_DEV_MODE_CHG_INT	(1 << 9)
+#define FUSB300_IGR1_CX_COMABT_INT	(1 << 8)
+#define FUSB300_IGR1_CX_COMFAIL_INT	(1 << 7)
+#define FUSB300_IGR1_CX_CMDEND_INT	(1 << 6)
+#define FUSB300_IGR1_CX_OUT_INT		(1 << 5)
+#define FUSB300_IGR1_CX_IN_INT		(1 << 4)
+#define FUSB300_IGR1_CX_SETUP_INT	(1 << 3)
+#define FUSB300_IGR1_INTGRP4		(1 << 2)
+#define FUSB300_IGR1_INTGRP3		(1 << 1)
+#define FUSB300_IGR1_INTGRP2		(1 << 0)
+
+/*
+ * *Interrupt Group 2 Register (offset = 408H)
+ * */
+#define FUSB300_IGR2_EP6_STR_ACCEPT_INT		(1 << 29)
+#define FUSB300_IGR2_EP6_STR_RESUME_INT		(1 << 28)
+#define FUSB300_IGR2_EP6_STR_REQ_INT		(1 << 27)
+#define FUSB300_IGR2_EP6_STR_NOTRDY_INT		(1 << 26)
+#define FUSB300_IGR2_EP6_STR_PRIME_INT		(1 << 25)
+#define FUSB300_IGR2_EP5_STR_ACCEPT_INT		(1 << 24)
+#define FUSB300_IGR2_EP5_STR_RESUME_INT		(1 << 23)
+#define FUSB300_IGR2_EP5_STR_REQ_INT		(1 << 22)
+#define FUSB300_IGR2_EP5_STR_NOTRDY_INT		(1 << 21)
+#define FUSB300_IGR2_EP5_STR_PRIME_INT		(1 << 20)
+#define FUSB300_IGR2_EP4_STR_ACCEPT_INT		(1 << 19)
+#define FUSB300_IGR2_EP4_STR_RESUME_INT		(1 << 18)
+#define FUSB300_IGR2_EP4_STR_REQ_INT		(1 << 17)
+#define FUSB300_IGR2_EP4_STR_NOTRDY_INT		(1 << 16)
+#define FUSB300_IGR2_EP4_STR_PRIME_INT		(1 << 15)
+#define FUSB300_IGR2_EP3_STR_ACCEPT_INT		(1 << 14)
+#define FUSB300_IGR2_EP3_STR_RESUME_INT		(1 << 13)
+#define FUSB300_IGR2_EP3_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR2_EP3_STR_NOTRDY_INT		(1 << 11)
+#define FUSB300_IGR2_EP3_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR2_EP2_STR_ACCEPT_INT		(1 << 9)
+#define FUSB300_IGR2_EP2_STR_RESUME_INT		(1 << 8)
+#define FUSB300_IGR2_EP2_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR2_EP2_STR_NOTRDY_INT		(1 << 6)
+#define FUSB300_IGR2_EP2_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR2_EP1_STR_ACCEPT_INT		(1 << 4)
+#define FUSB300_IGR2_EP1_STR_RESUME_INT		(1 << 3)
+#define FUSB300_IGR2_EP1_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR2_EP1_STR_NOTRDY_INT		(1 << 1)
+#define FUSB300_IGR2_EP1_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR2_EP_STR_ACCEPT_INT(n)	(1 << (5 * n - 1))
+#define FUSB300_IGR2_EP_STR_RESUME_INT(n)	(1 << (5 * n - 2))
+#define FUSB300_IGR2_EP_STR_REQ_INT(n)		(1 << (5 * n - 3))
+#define FUSB300_IGR2_EP_STR_NOTRDY_INT(n)	(1 << (5 * n - 4))
+#define FUSB300_IGR2_EP_STR_PRIME_INT(n)	(1 << (5 * n - 5))
+
+/*
+ * *Interrupt Group 3 Register (offset = 40CH)
+ * */
+#define FUSB300_IGR3_EP12_STR_ACCEPT_INT	(1 << 29)
+#define FUSB300_IGR3_EP12_STR_RESUME_INT	(1 << 28)
+#define FUSB300_IGR3_EP12_STR_REQ_INT		(1 << 27)
+#define FUSB300_IGR3_EP12_STR_NOTRDY_INT	(1 << 26)
+#define FUSB300_IGR3_EP12_STR_PRIME_INT		(1 << 25)
+#define FUSB300_IGR3_EP11_STR_ACCEPT_INT	(1 << 24)
+#define FUSB300_IGR3_EP11_STR_RESUME_INT	(1 << 23)
+#define FUSB300_IGR3_EP11_STR_REQ_INT		(1 << 22)
+#define FUSB300_IGR3_EP11_STR_NOTRDY_INT	(1 << 21)
+#define FUSB300_IGR3_EP11_STR_PRIME_INT		(1 << 20)
+#define FUSB300_IGR3_EP10_STR_ACCEPT_INT	(1 << 19)
+#define FUSB300_IGR3_EP10_STR_RESUME_INT	(1 << 18)
+#define FUSB300_IGR3_EP10_STR_REQ_INT		(1 << 17)
+#define FUSB300_IGR3_EP10_STR_NOTRDY_INT	(1 << 16)
+#define FUSB300_IGR3_EP10_STR_PRIME_INT		(1 << 15)
+#define FUSB300_IGR3_EP9_STR_ACCEPT_INT		(1 << 14)
+#define FUSB300_IGR3_EP9_STR_RESUME_INT		(1 << 13)
+#define FUSB300_IGR3_EP9_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR3_EP9_STR_NOTRDY_INT		(1 << 11)
+#define FUSB300_IGR3_EP9_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR3_EP8_STR_ACCEPT_INT		(1 << 9)
+#define FUSB300_IGR3_EP8_STR_RESUME_INT		(1 << 8)
+#define FUSB300_IGR3_EP8_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR3_EP8_STR_NOTRDY_INT		(1 << 6)
+#define FUSB300_IGR3_EP8_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR3_EP7_STR_ACCEPT_INT		(1 << 4)
+#define FUSB300_IGR3_EP7_STR_RESUME_INT		(1 << 3)
+#define FUSB300_IGR3_EP7_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR3_EP7_STR_NOTRDY_INT		(1 << 1)
+#define FUSB300_IGR3_EP7_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR3_EP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGR3_EP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGR3_EP_STR_REQ_INT(n)		(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGR3_EP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGR3_EP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/*
+ * *Interrupt Group 4 Register (offset = 410H)
+ * */
+#define FUSB300_IGR4_EP15_RX0_INT		(1 << 31)
+#define FUSB300_IGR4_EP14_RX0_INT		(1 << 30)
+#define FUSB300_IGR4_EP13_RX0_INT		(1 << 29)
+#define FUSB300_IGR4_EP12_RX0_INT		(1 << 28)
+#define FUSB300_IGR4_EP11_RX0_INT		(1 << 27)
+#define FUSB300_IGR4_EP10_RX0_INT		(1 << 26)
+#define FUSB300_IGR4_EP9_RX0_INT		(1 << 25)
+#define FUSB300_IGR4_EP8_RX0_INT		(1 << 24)
+#define FUSB300_IGR4_EP7_RX0_INT		(1 << 23)
+#define FUSB300_IGR4_EP6_RX0_INT		(1 << 22)
+#define FUSB300_IGR4_EP5_RX0_INT		(1 << 21)
+#define FUSB300_IGR4_EP4_RX0_INT		(1 << 20)
+#define FUSB300_IGR4_EP3_RX0_INT		(1 << 19)
+#define FUSB300_IGR4_EP2_RX0_INT		(1 << 18)
+#define FUSB300_IGR4_EP1_RX0_INT		(1 << 17)
+#define FUSB300_IGR4_EP_RX0_INT(x)		(1 << (x + 16))
+#define FUSB300_IGR4_EP15_STR_ACCEPT_INT	(1 << 14)
+#define FUSB300_IGR4_EP15_STR_RESUME_INT	(1 << 13)
+#define FUSB300_IGR4_EP15_STR_REQ_INT		(1 << 12)
+#define FUSB300_IGR4_EP15_STR_NOTRDY_INT	(1 << 11)
+#define FUSB300_IGR4_EP15_STR_PRIME_INT		(1 << 10)
+#define FUSB300_IGR4_EP14_STR_ACCEPT_INT	(1 << 9)
+#define FUSB300_IGR4_EP14_STR_RESUME_INT	(1 << 8)
+#define FUSB300_IGR4_EP14_STR_REQ_INT		(1 << 7)
+#define FUSB300_IGR4_EP14_STR_NOTRDY_INT	(1 << 6)
+#define FUSB300_IGR4_EP14_STR_PRIME_INT		(1 << 5)
+#define FUSB300_IGR4_EP13_STR_ACCEPT_INT	(1 << 4)
+#define FUSB300_IGR4_EP13_STR_RESUME_INT	(1 << 3)
+#define FUSB300_IGR4_EP13_STR_REQ_INT		(1 << 2)
+#define FUSB300_IGR4_EP13_STR_NOTRDY_INT	(1 << 1)
+#define FUSB300_IGR4_EP13_STR_PRIME_INT		(1 << 0)
+
+#define FUSB300_IGR4_EP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 12) - 1))
+#define FUSB300_IGR4_EP_STR_RESUME_INT(n)	(1 << (5 * (n - 12) - 2))
+#define FUSB300_IGR4_EP_STR_REQ_INT(n)		(1 << (5 * (n - 12) - 3))
+#define FUSB300_IGR4_EP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 12) - 4))
+#define FUSB300_IGR4_EP_STR_PRIME_INT(n)	(1 << (5 * (n - 12) - 5))
+
+/*
+ * *Interrupt Group 5 Register (offset = 414H)
+ * */
+#define FUSB300_IGR5_EP_STL_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Enable Group 0 Register (offset = 420H)
+ * */
+#define FUSB300_IGER0_EEP15_PRD_INT	(1 << 31)
+#define FUSB300_IGER0_EEP14_PRD_INT	(1 << 30)
+#define FUSB300_IGER0_EEP13_PRD_INT	(1 << 29)
+#define FUSB300_IGER0_EEP12_PRD_INT	(1 << 28)
+#define FUSB300_IGER0_EEP11_PRD_INT	(1 << 27)
+#define FUSB300_IGER0_EEP10_PRD_INT	(1 << 26)
+#define FUSB300_IGER0_EEP9_PRD_INT	(1 << 25)
+#define FUSB300_IGER0_EP8_PRD_INT	(1 << 24)
+#define FUSB300_IGER0_EEP7_PRD_INT	(1 << 23)
+#define FUSB300_IGER0_EEP6_PRD_INT	(1 << 22)
+#define FUSB300_IGER0_EEP5_PRD_INT	(1 << 21)
+#define FUSB300_IGER0_EEP4_PRD_INT	(1 << 20)
+#define FUSB300_IGER0_EEP3_PRD_INT	(1 << 19)
+#define FUSB300_IGER0_EEP2_PRD_INT	(1 << 18)
+#define FUSB300_IGER0_EEP1_PRD_INT	(1 << 17)
+#define FUSB300_IGER0_EEPn_PRD_INT(n)	(1 << (n + 16))
+
+#define FUSB300_IGER0_EEP15_FIFO_INT	(1 << 15)
+#define FUSB300_IGER0_EEP14_FIFO_INT	(1 << 14)
+#define FUSB300_IGER0_EEP13_FIFO_INT	(1 << 13)
+#define FUSB300_IGER0_EEP12_FIFO_INT	(1 << 12)
+#define FUSB300_IGER0_EEP11_FIFO_INT	(1 << 11)
+#define FUSB300_IGER0_EEP10_FIFO_INT	(1 << 10)
+#define FUSB300_IGER0_EEP9_FIFO_INT	(1 << 9)
+#define FUSB300_IGER0_EEP8_FIFO_INT	(1 << 8)
+#define FUSB300_IGER0_EEP7_FIFO_INT	(1 << 7)
+#define FUSB300_IGER0_EEP6_FIFO_INT	(1 << 6)
+#define FUSB300_IGER0_EEP5_FIFO_INT	(1 << 5)
+#define FUSB300_IGER0_EEP4_FIFO_INT	(1 << 4)
+#define FUSB300_IGER0_EEP3_FIFO_INT	(1 << 3)
+#define FUSB300_IGER0_EEP2_FIFO_INT	(1 << 2)
+#define FUSB300_IGER0_EEP1_FIFO_INT	(1 << 1)
+#define FUSB300_IGER0_EEPn_FIFO_INT(n)	(1 << n)
+
+/*
+ * *Interrupt Enable Group 1 Register (offset = 424H)
+ * */
+#define FUSB300_IGER1_EINT_GRP5		(1 << 31)
+#define FUSB300_IGER1_VBUS_CHG_INT	(1 << 30)
+#define FUSB300_IGER1_SYNF1_EMPTY_INT	(1 << 29)
+#define FUSB300_IGER1_SYNF0_EMPTY_INT	(1 << 28)
+#define FUSB300_IGER1_U3_EXIT_FAIL_INT	(1 << 27)
+#define FUSB300_IGER1_U2_EXIT_FAIL_INT	(1 << 26)
+#define FUSB300_IGER1_U1_EXIT_FAIL_INT	(1 << 25)
+#define FUSB300_IGER1_U2_ENTRY_FAIL_INT	(1 << 24)
+#define FUSB300_IGER1_U1_ENTRY_FAIL_INT	(1 << 23)
+#define FUSB300_IGER1_U3_EXIT_INT	(1 << 22)
+#define FUSB300_IGER1_U2_EXIT_INT	(1 << 21)
+#define FUSB300_IGER1_U1_EXIT_INT	(1 << 20)
+#define FUSB300_IGER1_U3_ENTRY_INT	(1 << 19)
+#define FUSB300_IGER1_U2_ENTRY_INT	(1 << 18)
+#define FUSB300_IGER1_U1_ENTRY_INT	(1 << 17)
+#define FUSB300_IGER1_HOT_RST_INT	(1 << 16)
+#define FUSB300_IGER1_WARM_RST_INT	(1 << 15)
+#define FUSB300_IGER1_RESM_INT		(1 << 14)
+#define FUSB300_IGER1_SUSP_INT		(1 << 13)
+#define FUSB300_IGER1_LPM_INT		(1 << 12)
+#define FUSB300_IGER1_HS_RST_INT	(1 << 11)
+#define FUSB300_IGER1_EDEV_MODE_CHG_INT	(1 << 9)
+#define FUSB300_IGER1_CX_COMABT_INT	(1 << 8)
+#define FUSB300_IGER1_CX_COMFAIL_INT	(1 << 7)
+#define FUSB300_IGER1_CX_CMDEND_INT	(1 << 6)
+#define FUSB300_IGER1_CX_OUT_INT	(1 << 5)
+#define FUSB300_IGER1_CX_IN_INT		(1 << 4)
+#define FUSB300_IGER1_CX_SETUP_INT	(1 << 3)
+#define FUSB300_IGER1_INTGRP4		(1 << 2)
+#define FUSB300_IGER1_INTGRP3		(1 << 1)
+#define FUSB300_IGER1_INTGRP2		(1 << 0)
+
+/*
+ * *Interrupt Enable Group 2 Register (offset = 428H)
+ * */
+#define FUSB300_IGER2_EEP_STR_ACCEPT_INT(n)	(1 << (5 * n - 1))
+#define FUSB300_IGER2_EEP_STR_RESUME_INT(n)	(1 << (5 * n - 2))
+#define FUSB300_IGER2_EEP_STR_REQ_INT(n)	(1 << (5 * n - 3))
+#define FUSB300_IGER2_EEP_STR_NOTRDY_INT(n)	(1 << (5 * n - 4))
+#define FUSB300_IGER2_EEP_STR_PRIME_INT(n)	(1 << (5 * n - 5))
+
+/*
+ * *Interrupt Enable Group 3 Register (offset = 42CH)
+ * */
+
+#define FUSB300_IGER3_EEP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGER3_EEP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGER3_EEP_STR_REQ_INT(n)	(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGER3_EEP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGER3_EEP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/*
+ * *Interrupt Enable Group 4 Register (offset = 430H)
+ * */
+
+#define FUSB300_IGER4_EEP_RX0_INT(n)		(1 << (n + 16))
+#define FUSB300_IGER4_EEP_STR_ACCEPT_INT(n)	(1 << (5 * (n - 6) - 1))
+#define FUSB300_IGER4_EEP_STR_RESUME_INT(n)	(1 << (5 * (n - 6) - 2))
+#define FUSB300_IGER4_EEP_STR_REQ_INT(n)	(1 << (5 * (n - 6) - 3))
+#define FUSB300_IGER4_EEP_STR_NOTRDY_INT(n)	(1 << (5 * (n - 6) - 4))
+#define FUSB300_IGER4_EEP_STR_PRIME_INT(n)	(1 << (5 * (n - 6) - 5))
+
+/* EP PRD Ready (EP_PRD_RDY, offset = 504H) */
+
+#define FUSB300_EPPRDR_EP15_PRD_RDY		(1 << 15)
+#define FUSB300_EPPRDR_EP14_PRD_RDY		(1 << 14)
+#define FUSB300_EPPRDR_EP13_PRD_RDY		(1 << 13)
+#define FUSB300_EPPRDR_EP12_PRD_RDY		(1 << 12)
+#define FUSB300_EPPRDR_EP11_PRD_RDY		(1 << 11)
+#define FUSB300_EPPRDR_EP10_PRD_RDY		(1 << 10)
+#define FUSB300_EPPRDR_EP9_PRD_RDY		(1 << 9)
+#define FUSB300_EPPRDR_EP8_PRD_RDY		(1 << 8)
+#define FUSB300_EPPRDR_EP7_PRD_RDY		(1 << 7)
+#define FUSB300_EPPRDR_EP6_PRD_RDY		(1 << 6)
+#define FUSB300_EPPRDR_EP5_PRD_RDY		(1 << 5)
+#define FUSB300_EPPRDR_EP4_PRD_RDY		(1 << 4)
+#define FUSB300_EPPRDR_EP3_PRD_RDY		(1 << 3)
+#define FUSB300_EPPRDR_EP2_PRD_RDY		(1 << 2)
+#define FUSB300_EPPRDR_EP1_PRD_RDY		(1 << 1)
+#define FUSB300_EPPRDR_EP_PRD_RDY(n)		(1 << n)
+
+/* AHB Bus Control Register (offset = 514H) */
+#define FUSB300_AHBBCR_S1_SPLIT_ON		(1 << 17)
+#define FUSB300_AHBBCR_S0_SPLIT_ON		(1 << 16)
+#define FUSB300_AHBBCR_S1_1entry		(0 << 12)
+#define FUSB300_AHBBCR_S1_4entry		(3 << 12)
+#define FUSB300_AHBBCR_S1_8entry		(5 << 12)
+#define FUSB300_AHBBCR_S1_16entry		(7 << 12)
+#define FUSB300_AHBBCR_S0_1entry		(0 << 8)
+#define FUSB300_AHBBCR_S0_4entry		(3 << 8)
+#define FUSB300_AHBBCR_S0_8entry		(5 << 8)
+#define FUSB300_AHBBCR_S0_16entry		(7 << 8)
+#define FUSB300_AHBBCR_M1_BURST_SINGLE		(0 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR		(1 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR4		(3 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR8		(5 << 4)
+#define FUSB300_AHBBCR_M1_BURST_INCR16		(7 << 4)
+#define FUSB300_AHBBCR_M0_BURST_SINGLE		0
+#define FUSB300_AHBBCR_M0_BURST_INCR		1
+#define FUSB300_AHBBCR_M0_BURST_INCR4		3
+#define FUSB300_AHBBCR_M0_BURST_INCR8		5
+#define FUSB300_AHBBCR_M0_BURST_INCR16		7
+#define FUSB300_IGER5_EEP_STL_INT(n)		(1 << n)
+
+/* WORD 0 Data Structure of PRD Table */
+#define FUSB300_EPPRD0_M			(1 << 30)
+#define FUSB300_EPPRD0_O			(1 << 29)
+/* The finished prd */
+#define FUSB300_EPPRD0_F			(1 << 28)
+#define FUSB300_EPPRD0_I			(1 << 27)
+#define FUSB300_EPPRD0_A			(1 << 26)
+/* To decide HW point to first prd at next time */
+#define FUSB300_EPPRD0_L			(1 << 25)
+#define FUSB300_EPPRD0_H			(1 << 24)
+#define FUSB300_EPPRD0_BTC(n)			(n & 0xFFFFFF)
+
+/*----------------------------------------------------------------------*/
+#define FUSB300_MAX_NUM_EP		16
+
+#define FUSB300_FIFO_ENTRY_NUM		8
+#define FUSB300_MAX_FIFO_ENTRY		8
+
+#define SS_CTL_MAX_PACKET_SIZE		0x200
+#define SS_BULK_MAX_PACKET_SIZE		0x400
+#define SS_INT_MAX_PACKET_SIZE		0x400
+#define SS_ISO_MAX_PACKET_SIZE		0x400
+
+#define HS_BULK_MAX_PACKET_SIZE		0x200
+#define HS_CTL_MAX_PACKET_SIZE		0x40
+#define HS_INT_MAX_PACKET_SIZE		0x400
+#define HS_ISO_MAX_PACKET_SIZE		0x400
+
+struct fusb300_ep_info {
+	u8	epnum;
+	u8	type;
+	u8	interval;
+	u8	dir_in;
+	u16	maxpacket;
+	u16	addrofs;
+	u16	bw_num;
+};
+
+struct fusb300_request {
+
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+
+struct fusb300_ep {
+	struct usb_ep		ep;
+	struct fusb300		*fusb300;
+
+	struct list_head	queue;
+	unsigned		stall:1;
+	unsigned		wedged:1;
+	unsigned		use_dma:1;
+
+	unsigned char		epnum;
+	unsigned char		type;
+	const struct usb_endpoint_descriptor	*desc;
+};
+
+struct fusb300 {
+	spinlock_t		lock;
+	void __iomem		*reg;
+
+	unsigned long		irq_trigger;
+
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+
+	struct fusb300_ep	*ep[FUSB300_MAX_NUM_EP];
+
+	struct usb_request	*ep0_req;	/* for internal request */
+	__le16			ep0_data;
+	u32			ep0_length;	/* for internal request */
+	u8			ep0_dir;	/* 0/0x80  out/in */
+
+	u8			fifo_entry_num;	/* next start fifo entry */
+	u32			addrofs;	/* next fifo address offset */
+	u8			reenum;		/* if re-enumeration */
+};
+
+#endif