Commit 0fff6b9a authored by Russell King's avatar Russell King

Merge branch 'pmu-for-rmk' of...

Merge branch 'pmu-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into devel-stable
parents 0cc9d525 aa90eb9d
......@@ -12,11 +12,25 @@
#ifndef __ARM_PMU_H__
#define __ARM_PMU_H__
#include <linux/interrupt.h>
enum arm_pmu_type {
ARM_PMU_DEVICE_CPU = 0,
ARM_NUM_PMU_DEVICES,
};
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
* @handle_irq: an optional handler which will be called from the interrupt and
* passed the address of the low level handler, and can be used to implement
* any platform specific handling before or after calling it.
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
};
#ifdef CONFIG_CPU_HAS_PMU
/**
......
......@@ -377,9 +377,18 @@ validate_group(struct perf_event *event)
return 0;
}
static irqreturn_t armpmu_platform_irq(int irq, void *dev)
{
struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev);
return plat->handle_irq(irq, dev, armpmu->handle_irq);
}
static int
armpmu_reserve_hardware(void)
{
struct arm_pmu_platdata *plat;
irq_handler_t handle_irq;
int i, err = -ENODEV, irq;
pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
......@@ -390,6 +399,12 @@ armpmu_reserve_hardware(void)
init_pmu(ARM_PMU_DEVICE_CPU);
plat = dev_get_platdata(&pmu_device->dev);
if (plat && plat->handle_irq)
handle_irq = armpmu_platform_irq;
else
handle_irq = armpmu->handle_irq;
if (pmu_device->num_resources < 1) {
pr_err("no irqs for PMUs defined\n");
return -ENODEV;
......@@ -400,7 +415,7 @@ armpmu_reserve_hardware(void)
if (irq < 0)
continue;
err = request_irq(irq, armpmu->handle_irq,
err = request_irq(irq, handle_irq,
IRQF_DISABLED | IRQF_NOBALANCING,
"armpmu", NULL);
if (err) {
......
......@@ -12,22 +12,20 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include "devices-db8500.h"
static struct platform_device *platform_devs[] __initdata = {
&u8500_dma40_device,
};
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
......@@ -89,6 +87,51 @@ void __init u8500_map_io(void)
iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
}
static struct resource db8500_pmu_resources[] = {
[0] = {
.start = IRQ_DB8500_PMU,
.end = IRQ_DB8500_PMU,
.flags = IORESOURCE_IRQ,
},
};
/*
* The PMU IRQ lines of two cores are wired together into a single interrupt.
* Bounce the interrupt to the other core if it's not ours.
*/
static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
{
irqreturn_t ret = handler(irq, dev);
int other = !smp_processor_id();
if (ret == IRQ_NONE && cpu_online(other))
irq_set_affinity(irq, cpumask_of(other));
/*
* We should be able to get away with the amount of IRQ_NONEs we give,
* while still having the spurious IRQ detection code kick in if the
* interrupt really starts hitting spuriously.
*/
return ret;
}
static struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
};
static struct platform_device db8500_pmu_device = {
.name = "arm-pmu",
.id = ARM_PMU_DEVICE_CPU,
.num_resources = ARRAY_SIZE(db8500_pmu_resources),
.resource = db8500_pmu_resources,
.dev.platform_data = &db8500_pmu_platdata,
};
static struct platform_device *platform_devs[] __initdata = {
&u8500_dma40_device,
&db8500_pmu_device,
};
static resource_size_t __initdata db8500_gpio_base[] = {
U8500_GPIOBANK0_BASE,
U8500_GPIOBANK1_BASE,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment