MIPS: Add support for Mobileye EyeQ5

Introduce support for the MIPS based Mobileye EyeQ5 SoCs.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

arch/mips/Kbuild.platforms

@@ -17,6 +17,7 @@ platform-$(CONFIG_MACH_LOONGSON2EF)	+= loongson2ef/
 platform-$(CONFIG_MACH_LOONGSON32)	+= loongson32/
 platform-$(CONFIG_MACH_LOONGSON64)	+= loongson64/
 platform-$(CONFIG_MIPS_MALTA)		+= mti-malta/
+platform-$(CONFIG_MACH_EYEQ5)		+= mobileye/
 platform-$(CONFIG_MACH_NINTENDO64)	+= n64/
 platform-$(CONFIG_PIC32MZDA)		+= pic32/
 platform-$(CONFIG_RALINK)		+= ralink/

arch/mips/Kconfig

@@ -571,6 +571,59 @@ config MACH_PIC32
 	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
 	  microcontrollers.
 
+config MACH_EYEQ5
+	bool "Mobileye EyeQ5 SoC"
+	select MACH_GENERIC_CORE
+	select ARM_AMBA
+	select PHYSICAL_START_BOOL
+	select ARCH_SPARSEMEM_DEFAULT if 64BIT
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select CLKSRC_MIPS_GIC
+	select COMMON_CLK
+	select CPU_MIPSR2_IRQ_EI
+	select CPU_MIPSR2_IRQ_VI
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select HAVE_PCI
+	select IRQ_MIPS_CPU
+	select MIPS_AUTO_PFN_OFFSET
+	select MIPS_CPU_SCACHE
+	select MIPS_GIC
+	select MIPS_L1_CACHE_SHIFT_7
+	select PCI_DRIVERS_GENERIC
+	select SMP_UP if SMP
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_MIPS64_R6
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_RELOCATABLE
+	select SYS_SUPPORTS_ZBOOT
+	select UHI_BOOT
+	select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select USE_OF
+	help
+	  Select this to build a kernel supporting EyeQ5 SoC from Mobileye.
+
+	bool
+
+config FIT_IMAGE_FDT_EPM5
+	bool "Include FDT for Mobileye EyeQ5 development platforms"
+	depends on MACH_EYEQ5
+	default n
+	help
+	  Enable this to include the FDT for the EyeQ5 development platforms
+	  from Mobileye in the FIT kernel image.
+	  This requires u-boot on the platform.
+
 config MACH_NINTENDO64
 	bool "Nintendo 64 console"
 	select CEVT_R4K

arch/mips/configs/eyeq5_defconfig

+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_TASKSTATS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_MACH_EYEQ5=y
+CONFIG_FIT_IMAGE_FDT_EPM5=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_NR_CPUS=16
+CONFIG_MIPS_RAW_APPENDED_DTB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_USERFAULTFD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_DEBUG=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_SCSI=y
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=y
+CONFIG_IPVLAN=y
+CONFIG_MACB=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_CAN_M_CAN=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_PTP_1588_CLOCK is not set
+CONFIG_PINCTRL=y
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_ITE=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_REDRAGON=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_NVMEM is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_ENCRYPTION=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_CRYPTO_CRC32_MIPS=y
+CONFIG_FRAME_WARN=1024
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon"

arch/mips/mobileye/Makefile

+# SPDX-License-Identifier: GPL-2.0-or-later

arch/mips/mobileye/Platform

+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@mips.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation;  either version 2 of the  License, or (at your
+# option) any later version.
+#
+
+load-$(CONFIG_MACH_EYEQ5)	= 0xa800000808000000
+all-$(CONFIG_MACH_EYEQ5)	+= vmlinux.gz.itb
+
+its-y					:= vmlinux.its.S
+its-$(CONFIG_FIT_IMAGE_FDT_EPM5)	+= board-epm5.its.S

arch/mips/mobileye/board-epm5.its.S

+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/ {
+	images {
+		fdt-mobileye-epm5 {
+			description = "Mobileeye MP5 Device Tree";
+			data = /incbin/("boot/dts/mobileye/eyeq5-epm5.dtb");
+			type = "flat_dt";
+			arch = "mips";
+			compression = "none";
+			hash {
+				algo = "sha1";
+			};
+		};
+	};
+
+    configurations {
+		default = "conf-1";
+		conf-1 {
+			description = "Mobileye EPM5 Linux kernel";
+			kernel = "kernel";
+			fdt = "fdt-mobileye-epm5";
+		};
+	};
+};

arch/mips/mobileye/vmlinux.its.S

+/* SPDX-License-Identifier: GPL-2.0 */
+/dts-v1/;
+
+/ {
+	description = KERNEL_NAME;
+	#address-cells = <ADDR_CELLS>;
+
+	images {
+		kernel {
+			description = KERNEL_NAME;
+			data = /incbin/(VMLINUX_BINARY);
+			type = "kernel";
+			arch = "mips";
+			os = "linux";
+			compression = VMLINUX_COMPRESSION;
+			load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
+			entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
+			hash {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		default = "conf-default";
+
+		conf-default {
+			description = "Generic Linux kernel";
+			kernel = "kernel";
+		};
+	};
+};