PCI: pciehp: Remove pciehp_set_attention_status()

Remove pciehp_set_attention_status() and use pciehp_set_indicators()
instead, since the code is mostly the same.

Link: https://lore.kernel.org/r/20190903111021.1559-4-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

drivers/pci/hotplug/pciehp.h

@@ -170,7 +170,6 @@ void pciehp_get_power_status(struct controller *ctrl, u8 *status);
 #define INDICATOR_NOOP -1	/* Leave indicator unchanged */
 void pciehp_set_indicators(struct controller *ctrl, int pwr, int attn);
 
-void pciehp_set_attention_status(struct controller *ctrl, u8 status);
 void pciehp_get_latch_status(struct controller *ctrl, u8 *status);
 int pciehp_query_power_fault(struct controller *ctrl);
 void pciehp_green_led_on(struct controller *ctrl);

drivers/pci/hotplug/pciehp_core.c

@@ -95,15 +95,20 @@ static void cleanup_slot(struct controller *ctrl)
 }
 
 /*
- * set_attention_status - Turns the Amber LED for a slot on, off or blink
+ * set_attention_status - Turns the Attention Indicator on, off or blinking
  */
 static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
 {
 	struct controller *ctrl = to_ctrl(hotplug_slot);
 	struct pci_dev *pdev = ctrl->pcie->port;
 
+	if (status)
+		status <<= PCI_EXP_SLTCTL_ATTN_IND_SHIFT;
+	else
+		status = PCI_EXP_SLTCTL_ATTN_IND_OFF;
+
 	pci_config_pm_runtime_get(pdev);
-	pciehp_set_attention_status(ctrl, status);
+	pciehp_set_indicators(ctrl, INDICATOR_NOOP, status);
 	pci_config_pm_runtime_put(pdev);
 	return 0;
 }

drivers/pci/hotplug/pciehp_hpc.c

@@ -418,31 +418,6 @@ int pciehp_set_raw_indicator_status(struct hotplug_slot *hotplug_slot,
 	return 0;
 }
 
-void pciehp_set_attention_status(struct controller *ctrl, u8 value)
-{
-	u16 slot_cmd;
-
-	if (!ATTN_LED(ctrl))
-		return;
-
-	switch (value) {
-	case 0:		/* turn off */
-		slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_OFF;
-		break;
-	case 1:		/* turn on */
-		slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_ON;
-		break;
-	case 2:		/* turn blink */
-		slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_BLINK;
-		break;
-	default:
-		return;
-	}
-	pcie_write_cmd_nowait(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC);
-	ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__,
-		 pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd);
-}
-
 /**
  * pciehp_set_indicators() - set attention indicator, power indicator, or both
  * @ctrl: PCIe hotplug controller

include/uapi/linux/pci_regs.h

@@ -591,6 +591,7 @@
 #define  PCI_EXP_SLTCTL_CCIE	0x0010	/* Command Completed Interrupt Enable */
 #define  PCI_EXP_SLTCTL_HPIE	0x0020	/* Hot-Plug Interrupt Enable */
 #define  PCI_EXP_SLTCTL_AIC	0x00c0	/* Attention Indicator Control */
+#define  PCI_EXP_SLTCTL_ATTN_IND_SHIFT 6      /* Attention Indicator shift */
 #define  PCI_EXP_SLTCTL_ATTN_IND_ON    0x0040 /* Attention Indicator on */
 #define  PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */
 #define  PCI_EXP_SLTCTL_ATTN_IND_OFF   0x00c0 /* Attention Indicator off */