MIPS: Malta: Use syscon-reboot driver to reboot

Make use of the generic syscon-reboot driver to reboot the Malta board,
reducing the amount of platform code it requires.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Stephan Linz <linz@li-pro.net>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14279/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/boot/dts/mti/malta.dts

@@ -81,6 +81,18 @@ board-config@3e0000 {
 		};
 	};
 
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x1000>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x500>;
+			mask = <0x4d>;
+		};
+	};
+
 	isa {
 		compatible = "isa";
 		#address-cells = <2>;

arch/mips/configs/malta_defconfig

@@ -318,6 +318,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/configs/malta_kvm_defconfig

@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/configs/malta_kvm_guest_defconfig

@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/configs/malta_qemu_32r6_defconfig

@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y

arch/mips/configs/maltaaprp_defconfig

@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y

arch/mips/configs/maltasmvp_defconfig

@@ -134,6 +134,8 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y

arch/mips/configs/maltasmvp_eva_defconfig

@@ -137,6 +137,8 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y

arch/mips/configs/maltaup_defconfig

@@ -131,6 +131,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y

arch/mips/configs/maltaup_xpa_defconfig

@@ -326,6 +326,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/mti-malta/malta-reset.c

@@ -8,21 +8,11 @@
  */
 #include <linux/io.h>
 #include <linux/pm.h>
+#include <linux/reboot.h>
 
 #include <asm/reboot.h>
 #include <asm/mach-malta/malta-pm.h>
 
-#define SOFTRES_REG	0x1f000500
-#define GORESET		0x42
-
-static void mips_machine_restart(char *command)
-{
-	unsigned int __iomem *softres_reg =
-		ioremap(SOFTRES_REG, sizeof(unsigned int));
-
-	__raw_writel(GORESET, softres_reg);
-}
-
 static void mips_machine_halt(void)
 {
 	while (true);
@@ -33,12 +23,11 @@ static void mips_machine_power_off(void)
 	mips_pm_suspend(PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF);
 
 	pr_info("Failed to power down, resetting\n");
-	mips_machine_restart(NULL);
+	machine_restart(NULL);
 }
 
 static int __init mips_reboot_setup(void)
 {
-	_machine_restart = mips_machine_restart;
 	_machine_halt = mips_machine_halt;
 	pm_power_off = mips_machine_power_off;