USB: serial: remove redundant OOM messages

Remove redundant error messages on allocation failures, which have
already been logged.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/serial/ch341.c

@@ -384,10 +384,8 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	uint8_t *break_reg;
 
 	break_reg = kmalloc(2, GFP_KERNEL);
-	if (!break_reg) {
-		dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
+	if (!break_reg)
 		return;
-	}
 
 	r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
 			ch341_break_reg, 0, break_reg, 2);

drivers/usb/serial/console.c

@@ -135,7 +135,6 @@ static int usb_console_setup(struct console *co, char *options)
 			tty = kzalloc(sizeof(*tty), GFP_KERNEL);
 			if (!tty) {
 				retval = -ENOMEM;
-				dev_err(&port->dev, "no more memory\n");
 				goto reset_open_count;
 			}
 			kref_init(&tty->kref);
@@ -144,7 +143,6 @@ static int usb_console_setup(struct console *co, char *options)
 			tty->index = co->index;
 			if (tty_init_termios(tty)) {
 				retval = -ENOMEM;
-				dev_err(&port->dev, "no more memory\n");
 				goto free_tty;
 			}
 		}

drivers/usb/serial/cp210x.c

@@ -305,10 +305,8 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request,
 	length = (((size - 1) | 3) + 1) / 4;
 
 	buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
-	if (!buf) {
-		dev_err(&port->dev, "%s - out of memory.\n", __func__);
+	if (!buf)
 		return -ENOMEM;
-	}
 
 	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
@@ -352,10 +350,8 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request,
 	length = (((size - 1) | 3) + 1) / 4;
 
 	buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
-	if (!buf) {
-		dev_err(&port->dev, "%s - out of memory.\n", __func__);
+	if (!buf)
 		return -ENOMEM;
-	}
 
 	/* Array of integers into bytes */
 	for (i = 0; i < length; i++)

drivers/usb/serial/ftdi_sio.c

@@ -1695,11 +1695,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
-	if (!priv) {
-		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
-					sizeof(struct ftdi_private));
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	mutex_init(&priv->cfg_lock);
 

drivers/usb/serial/garmin_gps.c

@@ -279,10 +279,9 @@ static int pkt_add(struct garmin_data *garmin_data_p,
 	if (data_length) {
 		pkt = kmalloc(sizeof(struct garmin_packet)+data_length,
 								GFP_ATOMIC);
-		if (pkt == NULL) {
-			dev_err(&garmin_data_p->port->dev, "out of memory\n");
+		if (!pkt)
 			return 0;
-		}
+
 		pkt->size = data_length;
 		memcpy(pkt->data, data, data_length);
 
@@ -1006,14 +1005,11 @@ static int garmin_write_bulk(struct usb_serial_port *port,
 	spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 
 	buffer = kmalloc(count, GFP_ATOMIC);
-	if (!buffer) {
-		dev_err(&port->dev, "out of memory\n");
+	if (!buffer)
 		return -ENOMEM;
-	}
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		dev_err(&port->dev, "no more free urbs\n");
 		kfree(buffer);
 		return -ENOMEM;
 	}
@@ -1393,10 +1389,9 @@ static int garmin_port_probe(struct usb_serial_port *port)
 	struct garmin_data *garmin_data_p;
 
 	garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
-	if (garmin_data_p == NULL) {
-		dev_err(&port->dev, "%s - Out of memory\n", __func__);
+	if (!garmin_data_p)
 		return -ENOMEM;
-	}
+
 	init_timer(&garmin_data_p->timer);
 	spin_lock_init(&garmin_data_p->lock);
 	INIT_LIST_HEAD(&garmin_data_p->pktlist);

drivers/usb/serial/io_edgeport.c

@@ -898,7 +898,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	edge_port->txfifo.fifo	= kmalloc(edge_port->maxTxCredits, GFP_KERNEL);
 
 	if (!edge_port->txfifo.fifo) {
-		dev_dbg(dev, "%s - no memory\n", __func__);
 		edge_close(port);
 		return -ENOMEM;
 	}
@@ -908,7 +907,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	edge_port->write_in_progress = false;
 
 	if (!edge_port->write_urb) {
-		dev_dbg(dev, "%s - no memory\n", __func__);
 		edge_close(port);
 		return -ENOMEM;
 	}
@@ -1245,9 +1243,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial,
 	   to send out */
 	count = fifo->count;
 	buffer = kmalloc(count+2, GFP_ATOMIC);
-	if (buffer == NULL) {
-		dev_err_console(edge_port->port,
-				"%s - no more kernel memory...\n", __func__);
+	if (!buffer) {
 		edge_port->write_in_progress = false;
 		goto exit_send;
 	}
@@ -2025,11 +2021,8 @@ static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 	dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length);
 
 	transfer_buffer =  kmalloc(64, GFP_KERNEL);
-	if (!transfer_buffer) {
-		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
-							__func__, 64);
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
 
 	/* need to split these writes up into 64 byte chunks */
 	result = 0;
@@ -2073,11 +2066,8 @@ static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr,
 	unsigned char *transfer_buffer;
 
 	transfer_buffer =  kmalloc(64, GFP_KERNEL);
-	if (!transfer_buffer) {
-		dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n",
-								__func__, 64);
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
 
 	/* need to split these writes up into 64 byte chunks */
 	result = 0;
@@ -2119,11 +2109,8 @@ static int rom_read(struct usb_serial *serial, __u16 extAddr,
 	unsigned char *transfer_buffer;
 
 	transfer_buffer =  kmalloc(64, GFP_KERNEL);
-	if (!transfer_buffer) {
-		dev_err(&serial->dev->dev,
-			"%s - kmalloc(%d) failed.\n", __func__, 64);
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
 
 	/* need to split these reads up into 64 byte chunks */
 	result = 0;
@@ -2163,11 +2150,8 @@ static int send_iosp_ext_cmd(struct edgeport_port *edge_port,
 	int             status = 0;
 
 	buffer = kmalloc(10, GFP_ATOMIC);
-	if (!buffer) {
-		dev_err(&edge_port->port->dev,
-				"%s - kmalloc(%d) failed.\n", __func__, 10);
+	if (!buffer)
 		return -ENOMEM;
-	}
 
 	currentCommand = buffer;
 
@@ -2274,10 +2258,9 @@ static int send_cmd_write_baud_rate(struct edgeport_port *edge_port,
 
 	/* Alloc memory for the string of commands. */
 	cmdBuffer =  kmalloc(0x100, GFP_ATOMIC);
-	if (!cmdBuffer) {
-		dev_err(dev, "%s - kmalloc(%d) failed.\n", __func__, 0x100);
+	if (!cmdBuffer)
 		return -ENOMEM;
-	}
+
 	currCmd = cmdBuffer;
 
 	/* Enable access to divisor latch */
@@ -2783,10 +2766,9 @@ static int edge_startup(struct usb_serial *serial)
 
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
-	if (edge_serial == NULL) {
-		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+	if (!edge_serial)
 		return -ENOMEM;
-	}
+
 	spin_lock_init(&edge_serial->es_lock);
 	edge_serial->serial = serial;
 	usb_set_serial_data(serial, edge_serial);
@@ -2875,14 +2857,12 @@ static int edge_startup(struct usb_serial *serial)
 				/* not set up yet, so do it now */
 				edge_serial->interrupt_read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
-				if (!edge_serial->interrupt_read_urb) {
-					dev_err(ddev, "out of memory\n");
+				if (!edge_serial->interrupt_read_urb)
 					return -ENOMEM;
-				}
+
 				edge_serial->interrupt_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->interrupt_in_buffer) {
-					dev_err(ddev, "out of memory\n");
 					usb_free_urb(edge_serial->interrupt_read_urb);
 					return -ENOMEM;
 				}
@@ -2912,14 +2892,12 @@ static int edge_startup(struct usb_serial *serial)
 				/* not set up yet, so do it now */
 				edge_serial->read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
-				if (!edge_serial->read_urb) {
-					dev_err(ddev, "out of memory\n");
+				if (!edge_serial->read_urb)
 					return -ENOMEM;
-				}
+
 				edge_serial->bulk_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->bulk_in_buffer) {
-					dev_err(&dev->dev, "out of memory\n");
 					usb_free_urb(edge_serial->read_urb);
 					return -ENOMEM;
 				}

drivers/usb/serial/io_ti.c

@@ -364,11 +364,9 @@ static int write_boot_mem(struct edgeport_serial *serial,
 	/* Must do a read before write */
 	if (!serial->TiReadI2C) {
 		temp = kmalloc(1, GFP_KERNEL);
-		if (!temp) {
-			dev_err(&serial->serial->dev->dev,
-					"%s - out of memory\n", __func__);
+		if (!temp)
 			return -ENOMEM;
-		}
+
 		status = read_boot_mem(serial, 0, 1, temp);
 		kfree(temp);
 		if (status)
@@ -471,10 +469,8 @@ static int tx_active(struct edgeport_port *port)
 	int bytes_left = 0;
 
 	oedb = kmalloc(sizeof(*oedb), GFP_KERNEL);
-	if (!oedb) {
-		dev_err(&port->port->dev, "%s - out of memory\n", __func__);
+	if (!oedb)
 		return -ENOMEM;
-	}
 
 	lsr = kmalloc(1, GFP_KERNEL);	/* Sigh, that's right, just one byte,
 					   as not all platforms can do DMA
@@ -625,14 +621,11 @@ static int check_i2c_image(struct edgeport_serial *serial)
 	__u16 ttype;
 
 	rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
-	if (!rom_desc) {
-		dev_err(dev, "%s - out of memory\n", __func__);
+	if (!rom_desc)
 		return -ENOMEM;
-	}
+
 	buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL);
 	if (!buffer) {
-		dev_err(dev, "%s - out of memory when allocating buffer\n",
-								__func__);
 		kfree(rom_desc);
 		return -ENOMEM;
 	}
@@ -706,10 +699,9 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer)
 	struct device *dev = &serial->serial->dev->dev;
 
 	rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
-	if (!rom_desc) {
-		dev_err(dev, "%s - out of memory\n", __func__);
+	if (!rom_desc)
 		return -ENOMEM;
-	}
+
 	start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION,
 								rom_desc);
 
@@ -769,10 +761,8 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
 			sizeof(struct ti_i2c_firmware_rec));
 
 	buffer = kmalloc(buffer_size, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(dev, "%s - out of memory\n", __func__);
+	if (!buffer)
 		return -ENOMEM;
-	}
 
 	// Set entire image of 0xffs
 	memset(buffer, 0xff, buffer_size);
@@ -832,10 +822,8 @@ static int i2c_type_bootmode(struct edgeport_serial *serial)
 	u8 *data;
 
 	data = kmalloc(1, GFP_KERNEL);
-	if (!data) {
-		dev_err(dev, "%s - out of memory\n", __func__);
+	if (!data)
 		return -ENOMEM;
-	}
 
 	/* Try to read type 2 */
 	status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
@@ -986,10 +974,9 @@ static int download_fw(struct edgeport_serial *serial)
 		 * Read Manufacturing Descriptor from TI Based Edgeport
 		 */
 		ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
-		if (!ti_manuf_desc) {
-			dev_err(dev, "%s - out of memory.\n", __func__);
+		if (!ti_manuf_desc)
 			return -ENOMEM;
-		}
+
 		status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
 		if (status) {
 			kfree(ti_manuf_desc);
@@ -1006,7 +993,6 @@ static int download_fw(struct edgeport_serial *serial)
 
 		rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
 		if (!rom_desc) {
-			dev_err(dev, "%s - out of memory.\n", __func__);
 			kfree(ti_manuf_desc);
 			return -ENOMEM;
 		}
@@ -1023,7 +1009,6 @@ static int download_fw(struct edgeport_serial *serial)
 			firmware_version = kmalloc(sizeof(*firmware_version),
 								GFP_KERNEL);
 			if (!firmware_version) {
-				dev_err(dev, "%s - out of memory.\n", __func__);
 				kfree(rom_desc);
 				kfree(ti_manuf_desc);
 				return -ENOMEM;
@@ -1068,8 +1053,6 @@ static int download_fw(struct edgeport_serial *serial)
 
 				record = kmalloc(1, GFP_KERNEL);
 				if (!record) {
-					dev_err(dev, "%s - out of memory.\n",
-							__func__);
 					kfree(firmware_version);
 					kfree(rom_desc);
 					kfree(ti_manuf_desc);
@@ -1153,7 +1136,6 @@ static int download_fw(struct edgeport_serial *serial)
 
 			header = kmalloc(HEADER_SIZE, GFP_KERNEL);
 			if (!header) {
-				dev_err(dev, "%s - out of memory.\n", __func__);
 				kfree(rom_desc);
 				kfree(ti_manuf_desc);
 				return -ENOMEM;
@@ -1161,7 +1143,6 @@ static int download_fw(struct edgeport_serial *serial)
 
 			vheader = kmalloc(HEADER_SIZE, GFP_KERNEL);
 			if (!vheader) {
-				dev_err(dev, "%s - out of memory.\n", __func__);
 				kfree(header);
 				kfree(rom_desc);
 				kfree(ti_manuf_desc);
@@ -1290,10 +1271,9 @@ static int download_fw(struct edgeport_serial *serial)
 		 * Read Manufacturing Descriptor from TI Based Edgeport
 		 */
 		ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
-		if (!ti_manuf_desc) {
-			dev_err(dev, "%s - out of memory.\n", __func__);
+		if (!ti_manuf_desc)
 			return -ENOMEM;
-		}
+
 		status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
 		if (status) {
 			kfree(ti_manuf_desc);
@@ -1328,10 +1308,8 @@ static int download_fw(struct edgeport_serial *serial)
 		buffer_size = (((1024 * 16) - 512) +
 					sizeof(struct ti_i2c_image_header));
 		buffer = kmalloc(buffer_size, GFP_KERNEL);
-		if (!buffer) {
-			dev_err(dev, "%s - out of memory\n", __func__);
+		if (!buffer)
 			return -ENOMEM;
-		}
 
 		/* Initialize the buffer to 0xff (pad the buffer) */
 		memset(buffer, 0xff, buffer_size);
@@ -2122,7 +2100,6 @@ static void change_port_settings(struct tty_struct *tty,
 	config = kmalloc (sizeof (*config), GFP_KERNEL);
 	if (!config) {
 		tty->termios = *old_termios;
-		dev_err(dev, "%s - out of memory\n", __func__);
 		return;
 	}
 
@@ -2393,10 +2370,9 @@ static int edge_startup(struct usb_serial *serial)
 
 	/* create our private serial structure */
 	edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL);
-	if (edge_serial == NULL) {
-		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+	if (!edge_serial)
 		return -ENOMEM;
-	}
+
 	mutex_init(&edge_serial->es_lock);
 	edge_serial->serial = serial;
 	usb_set_serial_data(serial, edge_serial);

drivers/usb/serial/ir-usb.c

@@ -377,15 +377,12 @@ static void ir_set_termios(struct tty_struct *tty,
 	 * send the baud change out on an "empty" data packet
 	 */
 	urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!urb) {
-		dev_err(&port->dev, "%s - no more urbs\n", __func__);
+	if (!urb)
 		return;
-	}
+
 	transfer_buffer = kmalloc(1, GFP_KERNEL);
-	if (!transfer_buffer) {
-		dev_err(&port->dev, "%s - out of memory\n", __func__);
+	if (!transfer_buffer)
 		goto err_buf;
-	}
 
 	*transfer_buffer = ir_xbof | ir_baud;
 

drivers/usb/serial/keyspan.c

@@ -1226,10 +1226,8 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint,
 
 	dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint);
 	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
-	if (urb == NULL) {
-		dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d failed.\n", __func__, endpoint);
+	if (!urb)
 		return NULL;
-	}
 
 	if (endpoint == 0) {
 		/* control EP filled in when used */
@@ -2312,10 +2310,8 @@ static int keyspan_startup(struct usb_serial *serial)
 
 	/* Setup private data for serial driver */
 	s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
-	if (!s_priv) {
-		dev_dbg(&serial->dev->dev, "%s - kmalloc for keyspan_serial_private failed.\n", __func__);
+	if (!s_priv)
 		return -ENOMEM;
-	}
 
 	s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL);
 	if (!s_priv->instat_buf)

drivers/usb/serial/kl5kusb105.c

@@ -182,11 +182,9 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
 
 	status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
-	if (!status_buf) {
-		dev_err(&port->dev, "%s - out of memory for status buffer.\n",
-				__func__);
+	if (!status_buf)
 		return -ENOMEM;
-	}
+
 	status_buf[0] = 0xff;
 	status_buf[1] = 0xff;
 	rc = usb_control_msg(port->serial->dev,
@@ -273,11 +271,9 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * priv->line_state.
 	 */
 	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
-	if (!cfg) {
-		dev_err(&port->dev, "%s - out of memory for config buffer.\n",
-				__func__);
+	if (!cfg)
 		return -ENOMEM;
-	}
+
 	cfg->pktlen   = 5;
 	cfg->baudrate = kl5kusb105a_sio_b9600;
 	cfg->databits = kl5kusb105a_dtb_8;
@@ -417,10 +413,8 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	speed_t baud;
 
 	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
-	if (!cfg) {
-		dev_err(dev, "%s - out of memory for config buffer.\n", __func__);
+	if (!cfg)
 		return;
-	}
 
 	/* lock while we are modifying the settings */
 	spin_lock_irqsave(&priv->lock, flags);

drivers/usb/serial/mos7720.c

@@ -362,15 +362,13 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
 
 	/* create and initialize the control urb and containing urbtracker */
 	urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC);
-	if (urbtrack == NULL) {
-		dev_err(&usbdev->dev, "out of memory");
+	if (!urbtrack)
 		return -ENOMEM;
-	}
+
 	kref_get(&mos_parport->ref_count);
 	urbtrack->mos_parport = mos_parport;
 	urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (urbtrack->urb == NULL) {
-		dev_err(&usbdev->dev, "out of urbs");
+	if (!urbtrack->urb) {
 		kfree(urbtrack);
 		return -ENOMEM;
 	}
@@ -702,10 +700,9 @@ static int mos7715_parport_init(struct usb_serial *serial)
 
 	/* allocate and initialize parallel port control struct */
 	mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL);
-	if (mos_parport == NULL) {
-		dev_dbg(&serial->dev->dev, "%s: kzalloc failed\n", __func__);
+	if (!mos_parport)
 		return -ENOMEM;
-	}
+
 	mos_parport->msg_pending = false;
 	kref_init(&mos_parport->ref_count);
 	spin_lock_init(&mos_parport->listlock);
@@ -1018,18 +1015,12 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	for (j = 0; j < NUM_URBS; ++j) {
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		mos7720_port->write_urb_pool[j] = urb;
-
-		if (urb == NULL) {
-			dev_err(&port->dev, "No more urbs???\n");
+		if (!urb)
 			continue;
-		}
 
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 					       GFP_KERNEL);
 		if (!urb->transfer_buffer) {
-			dev_err(&port->dev,
-				"%s-out of memory for urb buffers.\n",
-				__func__);
 			usb_free_urb(mos7720_port->write_urb_pool[j]);
 			mos7720_port->write_urb_pool[j] = NULL;
 			continue;
@@ -1250,12 +1241,9 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (urb->transfer_buffer == NULL) {
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 					       GFP_KERNEL);
-		if (urb->transfer_buffer == NULL) {
-			dev_err_console(port, "%s no more kernel memory...\n",
-				__func__);
+		if (!urb->transfer_buffer)
 			goto exit;
 	}
-	}
 	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
 
 	memcpy(urb->transfer_buffer, current_position, transfer_size);

drivers/usb/serial/mos7840.c

@@ -876,20 +876,14 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	for (j = 0; j < NUM_URBS; ++j) {
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		mos7840_port->write_urb_pool[j] = urb;
-
-		if (urb == NULL) {
-			dev_err(&port->dev, "No more urbs???\n");
+		if (!urb)
 			continue;
-		}
 
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 								GFP_KERNEL);
 		if (!urb->transfer_buffer) {
 			usb_free_urb(urb);
 			mos7840_port->write_urb_pool[j] = NULL;
-			dev_err(&port->dev,
-				"%s-out of memory for urb buffers.\n",
-				__func__);
 			continue;
 		}
 	}
@@ -1381,13 +1375,9 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	if (urb->transfer_buffer == NULL) {
 		urb->transfer_buffer =
 		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
-		if (urb->transfer_buffer == NULL) {
-			dev_err_console(port, "%s no more kernel memory...\n",
-				__func__);
+		if (!urb->transfer_buffer)
 			goto exit;
 	}
-	}
 	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
 
 	memcpy(urb->transfer_buffer, current_position, transfer_size);
@@ -2206,10 +2196,8 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 
 	dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
 	mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
-	if (mos7840_port == NULL) {
-		dev_err(&port->dev, "%s - Out of memory\n", __func__);
+	if (!mos7840_port)
 		return -ENOMEM;
-	}
 
 	/* Initialize all port interrupt end point to port 0 int
 	 * endpoint. Our device has only one interrupt end point

drivers/usb/serial/opticon.c

@@ -200,15 +200,12 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	buffer = kmalloc(count, GFP_ATOMIC);
 	if (!buffer) {
-		dev_err(&port->dev, "out of memory\n");
 		count = -ENOMEM;
-
 		goto error_no_buffer;
 	}
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		dev_err(&port->dev, "no more free urbs\n");
 		count = -ENOMEM;
 		goto error_no_urb;
 	}
@@ -221,7 +218,6 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 	 * to transmit data to de barcode device the control endpoint is used */
 	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
 	if (!dr) {
-		dev_err(&port->dev, "out of memory\n");
 		count = -ENOMEM;
 		goto error_no_dr;
 	}

drivers/usb/serial/oti6858.c

@@ -200,8 +200,7 @@ static void setup_line(struct work_struct *work)
 	int result;
 
 	new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
-	if (new_setup == NULL) {
-		dev_err(&port->dev, "%s(): out of memory!\n", __func__);
+	if (!new_setup) {
 		/* we will try again */
 		schedule_delayed_work(&priv->delayed_setup_work,
 						msecs_to_jiffies(2));
@@ -287,11 +286,9 @@ static void send_data(struct work_struct *work)
 
 	if (count != 0) {
 		allow = kmalloc(1, GFP_KERNEL);
-		if (!allow) {
-			dev_err_console(port, "%s(): kmalloc failed\n",
-					__func__);
+		if (!allow)
 			return;
-		}
+
 		result = usb_control_msg(port->serial->dev,
 				usb_rcvctrlpipe(port->serial->dev, 0),
 				OTI6858_REQ_T_CHECK_TXBUFF,
@@ -517,10 +514,8 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
 	buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
-	if (buf == NULL) {
-		dev_err(&port->dev, "%s(): out of memory!\n", __func__);
+	if (!buf)
 		return -ENOMEM;
-	}
 
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				OTI6858_REQ_T_GET_STATUS,

drivers/usb/serial/pl2303.c

@@ -346,7 +346,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 
 	buf = kzalloc(7, GFP_KERNEL);
 	if (!buf) {
-		dev_err(&port->dev, "%s - out of memory.\n", __func__);
 		/* Report back no change occurred */
 		if (old_termios)
 			tty->termios = *old_termios;

drivers/usb/serial/quatech2.c

@@ -676,10 +676,8 @@ static int qt2_setup_urbs(struct usb_serial *serial)
 
 	serial_priv = usb_get_serial_data(serial);
 	serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!serial_priv->read_urb) {
-		dev_err(&serial->dev->dev, "No free urbs available\n");
+	if (!serial_priv->read_urb)
 		return -ENOMEM;
-	}
 
 	usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
 			  usb_rcvbulkpipe(serial->dev,
@@ -715,10 +713,8 @@ static int qt2_attach(struct usb_serial *serial)
 	}
 
 	serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
-	if (!serial_priv) {
-		dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__);
+	if (!serial_priv)
 		return -ENOMEM;
-	}
 
 	serial_priv->read_buffer = kmalloc(QT2_READ_BUFFER_SIZE, GFP_KERNEL);
 	if (!serial_priv->read_buffer) {

drivers/usb/serial/sierra.c

@@ -497,14 +497,12 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	buffer = kmalloc(writesize, GFP_ATOMIC);
 	if (!buffer) {
-		dev_err(&port->dev, "out of memory\n");
 		retval = -ENOMEM;
 		goto error_no_buffer;
 	}
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		dev_err(&port->dev, "no more free urbs\n");
 		retval = -ENOMEM;
 		goto error_no_urb;
 	}
@@ -736,11 +734,8 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
 		return NULL;
 
 	urb = usb_alloc_urb(0, mem_flags);
-	if (urb == NULL) {
-		dev_dbg(&serial->dev->dev, "%s: alloc for endpoint %d failed\n",
-			__func__, endpoint);
+	if (!urb)
 		return NULL;
-	}
 
 	buf = kmalloc(len, mem_flags);
 	if (buf) {
@@ -752,9 +747,6 @@ static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint,
 		dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__,
 				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
 	} else {
-		dev_dbg(&serial->dev->dev, "%s %c u:%p d:%p\n", __func__,
-				dir == USB_DIR_IN ? 'i' : 'o', urb, buf);
-
 		sierra_release_urb(urb);
 		urb = NULL;
 	}

drivers/usb/serial/ti_usb_3410_5052.c

@@ -301,10 +301,9 @@ static int ti_startup(struct usb_serial *serial)
 
 	/* create device structure */
 	tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
-	if (tdev == NULL) {
-		dev_err(&dev->dev, "%s - out of memory\n", __func__);
+	if (!tdev)
 		return -ENOMEM;
-	}
+
 	mutex_init(&tdev->td_open_close_lock);
 	tdev->td_serial = serial;
 	usb_set_serial_data(serial, tdev);
@@ -722,10 +721,8 @@ static void ti_set_termios(struct tty_struct *tty,
 		return;
 
 	config = kmalloc(sizeof(*config), GFP_KERNEL);
-	if (!config) {
-		dev_err(&port->dev, "%s - out of memory\n", __func__);
+	if (!config)
 		return;
-	}
 
 	config->wFlags = 0;
 
@@ -1194,10 +1191,8 @@ static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
 
 	size = sizeof(struct ti_port_status);
 	data = kmalloc(size, GFP_KERNEL);
-	if (!data) {
-		dev_err(&port->dev, "%s - out of memory\n", __func__);
+	if (!data)
 		return -ENOMEM;
-	}
 
 	status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
 		(__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
@@ -1397,10 +1392,8 @@ static int ti_write_byte(struct usb_serial_port *port,
 
 	size = sizeof(struct ti_write_data_bytes) + 2;
 	data = kmalloc(size, GFP_KERNEL);
-	if (!data) {
-		dev_err(&port->dev, "%s - out of memory\n", __func__);
+	if (!data)
 		return -ENOMEM;
-	}
 
 	data->bAddrType = TI_RW_DATA_ADDR_XDATA;
 	data->bDataType = TI_RW_DATA_BYTE;
@@ -1516,7 +1509,6 @@ static int ti_download_firmware(struct ti_device *tdev)
 		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
 	} else {
-		dev_dbg(&dev->dev, "%s ENOMEM\n", __func__);
 		status = -ENOMEM;
 	}
 	release_firmware(fw_p);

drivers/usb/serial/usb_wwan.c

@@ -447,12 +447,8 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
 	struct urb *urb;
 
 	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
-	if (urb == NULL) {
-		dev_dbg(&serial->interface->dev,
-			"%s: alloc for endpoint %d failed.\n", __func__,
-			endpoint);
+	if (!urb)
 		return NULL;
-	}
 
 	/* Fill URB using supplied data. */
 	usb_fill_bulk_urb(urb, serial->dev,

drivers/usb/serial/visor.c

@@ -324,11 +324,8 @@ static int palm_os_3_probe(struct usb_serial *serial,
 	int num_ports = 0;
 
 	transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL);
-	if (!transfer_buffer) {
-		dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
-			sizeof(*connection_info));
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
 
 	/* send a get connection info request */
 	retval = usb_control_msg(serial->dev,
@@ -419,11 +416,8 @@ static int palm_os_4_probe(struct usb_serial *serial,
 	int retval;
 
 	transfer_buffer =  kmalloc(sizeof(*connection_info), GFP_KERNEL);
-	if (!transfer_buffer) {
-		dev_err(dev, "%s - kmalloc(%Zd) failed.\n", __func__,
-			sizeof(*connection_info));
+	if (!transfer_buffer)
 		return -ENOMEM;
-	}
 
 	retval = usb_control_msg(serial->dev,
 				  usb_rcvctrlpipe(serial->dev, 0),

drivers/usb/serial/whiteheat.c

@@ -288,12 +288,8 @@ static int whiteheat_attach(struct usb_serial *serial)
 
 	command_info = kmalloc(sizeof(struct whiteheat_command_private),
 								GFP_KERNEL);
-	if (command_info == NULL) {
-		dev_err(&serial->dev->dev,
-			"%s: Out of memory for port structures\n",
-			serial->type->description);
+	if (!command_info)
 		goto no_command_private;
-	}
 
 	mutex_init(&command_info->mutex);
 	command_info->port_running = 0;