Skip to content

L
linux
Commit 10e4b227 authored by Hawking Zhang's avatar Hawking Zhang Committed by Alex Deucher
Browse files
Options

drm/amdgpu: atomfirmware.h updates for navi10 

Updated tables for Navi10.
Signed-off-by: default avatarHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent efd8725f
Hide whitespace changes
Inline Side-by-side
Showing with 180 additions and 8 deletions
drivers/gpu/drm/amd/include/atomfirmware.h
View file @ 10e4b227
......@@ -177,9 +177,10 @@ enum atom_voltage_type
VOLTAGE_TYPE_GENERIC_I2C_10 = 0x1A,
};
enum atom_dgpu_vram_type{
enum atom_dgpu_vram_type {
ATOM_DGPU_VRAM_TYPE_GDDR5 = 0x50,
ATOM_DGPU_VRAM_TYPE_HBM2 = 0x60,
ATOM_DGPU_VRAM_TYPE_GDDR6 = 0x70,
};
enum atom_dp_vs_preemph_def{
......@@ -1657,6 +1658,137 @@ struct atom_smc_dpm_info_v4_4
uint32_t boardreserved[10];
};
enum smudpm_v4_5_i2ccontrollername_e{
SMC_V4_5_I2C_CONTROLLER_NAME_VR_GFX = 0,
SMC_V4_5_I2C_CONTROLLER_NAME_VR_SOC,
SMC_V4_5_I2C_CONTROLLER_NAME_VR_VDDCI,
SMC_V4_5_I2C_CONTROLLER_NAME_VR_MVDD,
SMC_V4_5_I2C_CONTROLLER_NAME_LIQUID0,
SMC_V4_5_I2C_CONTROLLER_NAME_LIQUID1,
SMC_V4_5_I2C_CONTROLLER_NAME_PLX,
SMC_V4_5_I2C_CONTROLLER_NAME_SPARE,
SMC_V4_5_I2C_CONTROLLER_NAME_COUNT,
};
enum smudpm_v4_5_i2ccontrollerthrottler_e{
SMC_V4_5_I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_GFX,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_SOC,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_VDDCI,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_MVDD,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_LIQUID0,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_LIQUID1,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_PLX,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_COUNT,
};
enum smudpm_v4_5_i2ccontrollerprotocol_e{
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_VR_0,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_VR_1,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_TMP_0,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_TMP_1,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_SPARE_0,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_SPARE_1,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_COUNT,
};
struct smudpm_i2c_controller_config_v2
{
uint8_t Enabled;
uint8_t Speed;
uint8_t Padding[2];
uint32_t SlaveAddress;
uint8_t ControllerPort;
uint8_t ControllerName;
uint8_t ThermalThrotter;
uint8_t I2cProtocol;
};
struct atom_smc_dpm_info_v4_5
{
struct atom_common_table_header table_header;
// SECTION: BOARD PARAMETERS
// I2C Control
struct smudpm_i2c_controller_config_v2 I2cControllers[8];
// SVI2 Board Parameters
uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
uint8_t Padding8_V;
// Telemetry Settings
uint16_t GfxMaxCurrent; // in Amps
uint8_t GfxOffset; // in Amps
uint8_t Padding_TelemetryGfx;
uint16_t SocMaxCurrent; // in Amps
uint8_t SocOffset; // in Amps
uint8_t Padding_TelemetrySoc;
uint16_t Mem0MaxCurrent; // in Amps
uint8_t Mem0Offset; // in Amps
uint8_t Padding_TelemetryMem0;
uint16_t Mem1MaxCurrent; // in Amps
uint8_t Mem1Offset; // in Amps
uint8_t Padding_TelemetryMem1;
// GPIO Settings
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
// LED Display Settings
uint8_t LedPin0; // GPIO number for LedPin[0]
uint8_t LedPin1; // GPIO number for LedPin[1]
uint8_t LedPin2; // GPIO number for LedPin[2]
uint8_t padding8_4;
// GFXCLK PLL Spread Spectrum
uint8_t PllGfxclkSpreadEnabled; // on or off
uint8_t PllGfxclkSpreadPercent; // Q4.4
uint16_t PllGfxclkSpreadFreq; // kHz
// GFXCLK DFLL Spread Spectrum
uint8_t DfllGfxclkSpreadEnabled; // on or off
uint8_t DfllGfxclkSpreadPercent; // Q4.4
uint16_t DfllGfxclkSpreadFreq; // kHz
// UCLK Spread Spectrum
uint8_t UclkSpreadEnabled; // on or off
uint8_t UclkSpreadPercent; // Q4.4
uint16_t UclkSpreadFreq; // kHz
// SOCCLK Spread Spectrum
uint8_t SoclkSpreadEnabled; // on or off
uint8_t SocclkSpreadPercent; // Q4.4
uint16_t SocclkSpreadFreq; // kHz
// Total board power
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
uint16_t BoardPadding;
// Mvdd Svi2 Div Ratio Setting
uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
uint32_t BoardReserved[9];
};
/*
***************************************************************************
Data Table asic_profiling_info structure
......@@ -1870,8 +2002,7 @@ struct atom_umc_info_v3_3
Data Table vram_info structure
***************************************************************************
*/
struct atom_vram_module_v9
{
struct atom_vram_module_v9 {
// Design Specific Values
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
......@@ -1887,13 +2018,12 @@ struct atom_vram_module_v9
uint8_t tunningset_id; // MC phy registers set per.
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
uint8_t hbm_ven_rev_id; // hbm_ven_rev_id
uint8_t vram_rsd2; // reserved
uint8_t hbm_ven_rev_id; // hbm_ven_rev_id
uint8_t vram_rsd2; // reserved
char dram_pnstring[20]; // part number end with '0'.
};
struct atom_vram_info_header_v2_3
{
struct atom_vram_info_header_v2_3 {
struct atom_common_table_header table_header;
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust setting
uint16_t mem_clk_patch_tbloffset; // offset of atom_umc_init_reg_block structure for memory clock specific UMC setting
......@@ -1904,7 +2034,8 @@ struct atom_vram_info_header_v2_3
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
uint16_t vram_rsd2;
uint8_t vram_module_num; // indicate number of VRAM module
uint8_t vram_rsd1[2];
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
struct atom_vram_module_v9 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
};
......@@ -1949,6 +2080,47 @@ struct atom_umc_init_reg_block{
struct atom_umc_reg_setting_data_block umc_reg_setting_list[1];
};
struct atom_vram_module_v10 {
// Design Specific Values
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
uint32_t max_mem_clk; // max memory clock of this memory in unit of 10kHz, =0 means it is not defined
uint16_t reserved[3];
uint16_t mem_voltage; // mem_voltage
uint16_t vram_module_size; // Size of atom_vram_module_v9
uint8_t ext_memory_id; // Current memory module ID
uint8_t memory_type; // enum of atom_dgpu_vram_type
uint8_t channel_num; // Number of mem. channels supported in this module
uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
uint8_t tunningset_id; // MC phy registers set per
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
uint8_t vram_flags; // bit0= bankgroup enable
uint8_t vram_rsd2; // reserved
uint16_t gddr6_mr10; // gddr6 mode register10 value
uint16_t gddr6_mr1; // gddr6 mode register1 value
uint16_t gddr6_mr2; // gddr6 mode register2 value
uint16_t gddr6_mr7; // gddr6 mode register7 value
char dram_pnstring[20]; // part number end with '0'
};
struct atom_vram_info_header_v2_4 {
struct atom_common_table_header table_header;
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust setting
uint16_t mem_clk_patch_tbloffset; // offset of atom_umc_init_reg_block structure for memory clock specific UMC setting
uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set
uint16_t dram_data_remap_tbloffset; // reserved for now
uint16_t reserved; // offset of reserved
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
uint16_t vram_rsd2;
uint8_t vram_module_num; // indicate number of VRAM module
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
struct atom_vram_module_v10 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
};
/*
***************************************************************************
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7