Merge tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Use common polling loop for CMD1
   - Add support for DT compatibles for card quirks and use it for ti,wl1251
   - Fixup storing of the OCR mask for MMC_QUIRK_NONSTD_SDIO

  MMC host:
   - dw_mmc: Add support for MMC_GEN_CMDs
   - dw_mmc: Fixup calculation of the data timeout
   - dw_mmc-exynos: Add support for the ARTPEC-8 variant
   - jz4740: Add support for bi-directional DMA channels
   - mmci: Add support for eMMC HS200 mode for the stm32 sdmmc variant
   - mmci: Add support for stm32 sdmmc variant revision v2.2
   - mtk-sd: A couple of various minor improvements
   - omap_hsmmc: Drop redundant initialization for the ti,wl1251 chip
   - sdhci-esdhc-imx: Add support for the i.MXRT series variant
   - sdhci-esdhc-imx: Add Haibo Chen as maintainer
   - sdhci-pci: Add support for the Intel ADL variant
   - sdhci-pci-gli: GL975[50]: Add support for the Apple ARM64 variant
   - sdhci-pci-o2micro: Improve support for SDR104/HS200"

* tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (54 commits)
  dt-bindings: mmc: synopsys-dw-mshc: integrate Altera and Imagination
  mmc: pwrseq: Use bitmap_free() to free bitmap
  dt-bindings: mmc: PL18x stop relying on order of dma-names
  dt-bindings: mmc: sdhci-msm: Add compatible string for msm8994
  mmc: au1xmmc: propagate errors from platform_get_irq()
  mmc: sdhci-pci-o2micro: Restore the SD clock's base clock frequency
  mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode
  mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs
  mmc: mtk-sd: Fix usage of devm_clk_get_optional()
  mmc: mtk-sd: Take action for no-sdio device-tree parameter
  mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fields
  mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling
  MAINTAINERS: Add i.MX sdhci maintainer
  mmc: jz4740: Support using a bi-directional DMA channel
  dt-bindings: mmc: ingenic: Support using bi-directional DMA channel
  mmc: dw_mmc: Do not wait for DTO in case of error
  mmc: dw_mmc: Add driver callbacks for data read timeout
  mmc: dw_mmc-exynos: Add support for ARTPEC-8
  dt-bindings: mmc: exynos-dw-mshc: Add support for ARTPEC-8
  mmc: meson-mx-sdio: add IRQ check
  ...

Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml

@@ -118,6 +118,9 @@ properties:
   phy-names:
     const: phy_arasan
 
+  resets:
+    maxItems: 1
+
   arasan,soc-ctl-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:

Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

@@ -53,6 +53,12 @@ properties:
         items:
           - const: arm,pl18x
           - const: arm,primecell
+      - description: Entry for STMicroelectronics variant of PL18x.
+          This dedicated compatible is used by bootloaders.
+        items:
+          - const: st,stm32-sdmmc2
+          - const: arm,pl18x
+          - const: arm,primecell
 
   clocks:
     description: One or two clocks, the "apb_pclk" and the "MCLK"
@@ -60,6 +66,18 @@ properties:
     minItems: 1
     maxItems: 2
 
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rx
+          - const: tx
+
   power-domains: true
 
   resets:
@@ -213,7 +231,6 @@ examples:
       arm,primecell-periphid = <0x10153180>;
       reg = <0x52007000 0x1000>;
       interrupts = <49>;
-      interrupt-names = "cmd_irq";
       clocks = <&rcc 0>;
       clock-names = "apb_pclk";
       resets = <&rcc 1>;

Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt

-* BROADCOM BRCMSTB/BMIPS SDHCI Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-brcmstb driver.
-
-NOTE: The driver disables all UHS speed modes by default and depends
-on Device Tree properties to enable them for SoC/Board combinations
-that support them.
-
-Required properties:
-- compatible: should be one of the following
-  - "brcm,bcm7425-sdhci"
-  - "brcm,bcm7445-sdhci"
-  - "brcm,bcm7216-sdhci"
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-	sdhci@84b0000 {
-		sd-uhs-sdr50;
-		sd-uhs-ddr50;
-		sd-uhs-sdr104;
-		sdhci,auto-cmd12;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b0000 0x260 0x84b0300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x26 0x4>;
-		interrupt-names = "sdio0_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};
-
-	sdhci@84b1000 {
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		mmc-hs400-enhanced-strobe;
-		supports-cqe;
-		non-removable;
-		bus-width = <0x8>;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b1000 0x260 0x84b1300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x27 0x4>;
-		interrupt-names = "sdio1_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};

Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BRCMSTB/BMIPS SDHCI Controller binding
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sdhci
+          - const: brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7425-sdhci
+          - const: brcm,sdhci-brcmstb
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: host
+      - const: cfg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      handle to core clock for the sdhci controller.
+
+  clock-names:
+    items:
+      - const: sw_sdio
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@84b0000 {
+      sd-uhs-sdr50;
+      sd-uhs-ddr50;
+      sd-uhs-sdr104;
+      sdhci,auto-cmd12;
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
+      reg-names = "host", "cfg";
+      interrupts = <0x0 0x26 0x4>;
+      interrupt-names = "sdio0_0";
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
+
+    mmc@84b1000 {
+      mmc-ddr-1_8v;
+      mmc-hs200-1_8v;
+      mmc-hs400-1_8v;
+      mmc-hs400-enhanced-strobe;
+      supports-cqe;
+      non-removable;
+      bus-width = <0x8>;
+      compatible = "brcm,bcm7216-sdhci",
+           "brcm,bcm7445-sdhci",
+            "brcm,sdhci-brcmstb";
+      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
+      reg-names = "host", "cfg";
+      interrupts = <0x0 0x27 0x4>;
+      interrupt-names = "sdio1_0";
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };

Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt

@@ -22,6 +22,8 @@ Required Properties:
 	  specific extensions.
 	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
 	  specific extensions having an SMU.
+	- "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific
+	  extensions.
 
 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
   unit (ciu) clock. This property is applicable only for Exynos5 SoC's and

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml

@@ -34,6 +34,7 @@ properties:
           - fsl,imx6ull-usdhc
           - fsl,imx7d-usdhc
           - fsl,imx7ulp-usdhc
+          - fsl,imxrt1050-usdhc
           - nxp,s32g2-usdhc
       - items:
           - enum:
@@ -44,6 +45,10 @@ properties:
               - fsl,imx8qm-usdhc
               - fsl,imx8qxp-usdhc
           - const: fsl,imx7d-usdhc
+      - items:
+          - enum:
+              - fsl,imx8ulp-usdhc
+          - const: fsl,imx8mm-usdhc
 
   reg:
     maxItems: 1
@@ -116,6 +121,9 @@ properties:
       - const: ahb
       - const: per
 
+  power-domains:
+    maxItems: 1
+
   pinctrl-names:
     oneOf:
       - minItems: 3

Documentation/devicetree/bindings/mmc/img-dw-mshc.txt

-* Imagination specific extensions to the Synopsys Designware Mobile Storage
-  Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Imagination specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "img,pistachio-dw-mshc": for Pistachio SoCs
-
-Example:
-
-	mmc@18142000 {
-		compatible = "img,pistachio-dw-mshc";
-		reg = <0x18142000 0x400>;
-		interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&system_clk>, <&sdhost_clk>;
-		clock-names = "biu", "ciu";
-
-		fifo-depth = <0x20>;
-		bus-width = <4>;
-		disable-wp;
-	};

Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml

@@ -39,14 +39,15 @@ properties:
     const: mmc
 
   dmas:
-    items:
-      - description: DMA controller phandle and request line for RX
-      - description: DMA controller phandle and request line for TX
+    minItems: 1
+    maxItems: 2
 
   dma-names:
-    items:
+    oneOf:
+      - items:
           - const: rx
           - const: tx
+      - const: tx-rx
 
 required:
   - compatible
@@ -80,3 +81,27 @@ examples:
              <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
       dma-names = "rx", "tx";
     };
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    /*
+     * Alternative version of the example above,
+     * but using one single DMA channel for both
+     * TX and RX.
+     */
+    mmc1: mmc@13460000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13460000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <36>;
+
+      clocks = <&cgu JZ4780_CLK_MSC1>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC1_TX JZ4780_DMA_MSC1_RX 0xffffffff>;
+      dma-names = "tx-rx";
+    };

Documentation/devicetree/bindings/mmc/mtk-sd.yaml

@@ -36,6 +36,9 @@ properties:
           - const: mediatek,mt8195-mmc
           - const: mediatek,mt8183-mmc
 
+  reg:
+    maxItems: 1
+
   clocks:
     description:
       Should contain phandle for the clock feeding the MMC controller.
@@ -62,6 +65,9 @@ properties:
       - const: axi_cg
       - const: ahb_cg
 
+  interrupts:
+    maxItems: 1
+
   pinctrl-names:
     items:
       - const: default

Documentation/devicetree/bindings/mmc/sdhci-am654.yaml

@@ -48,6 +48,8 @@ properties:
       - const: clk_ahb
       - const: clk_xin
 
+  sdhci-caps-mask: true
+
   # PHY output tap delays:
   # Used to delay the data valid window and align it to the sampling clock.
   # Binding needs to be provided for each supported speed mode otherwise the

Documentation/devicetree/bindings/mmc/sdhci-msm.txt

@@ -17,6 +17,7 @@ Required properties:
 		"qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
+		"qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
 		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
 		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";

Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt

-* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
-
-Example:
-
-	mmc: dwmmc0@ff704000 {
-		compatible = "altr,socfpga-dw-mshc";
-		reg = <0xff704000 0x1000>;
-		interrupts = <0 129 4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};

Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml

@@ -26,6 +26,12 @@ properties:
   clocks:
     maxItems: 1
 
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
   reset-names:
     description: |
       There are three reset signals at maximum

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml

@@ -15,7 +15,10 @@ maintainers:
 # Everything else is described in the common file
 properties:
   compatible:
-    const: snps,dw-mshc
+    enum:
+      - altr,socfpga-dw-mshc
+      - img,pistachio-dw-mshc
+      - snps,dw-mshc
 
   reg:
     maxItems: 1

MAINTAINERS

@@ -17251,6 +17251,13 @@ L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/sdhci-omap.c
 
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) NXP i.MX DRIVER
+M:	Haibo Chen <haibo.chen@nxp.com>
+L:	linux-imx@nxp.com
+L:	linux-mmc@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/sdhci-esdhc-imx.c
+
 SECURE ENCRYPTING DEVICE (SED) OPAL DRIVER
 M:	Jonathan Derrick <jonathan.derrick@intel.com>
 M:	Revanth Rajashekar <revanth.rajashekar@intel.com>

drivers/mmc/core/block.c

@@ -1908,8 +1908,8 @@ static int mmc_blk_card_busy(struct mmc_card *card, struct request *req)
 
 	cb_data.card = card;
 	cb_data.status = 0;
-	err = __mmc_poll_for_busy(card, MMC_BLK_TIMEOUT_MS, &mmc_blk_busy_cb,
-				  &cb_data);
+	err = __mmc_poll_for_busy(card->host, MMC_BLK_TIMEOUT_MS,
+				  &mmc_blk_busy_cb, &cb_data);
 
 	/*
 	 * Do not assume data transferred correctly if there are any error bits

drivers/mmc/core/bus.c

@@ -53,16 +53,6 @@ static struct attribute *mmc_dev_attrs[] = {
 };
 ATTRIBUTE_GROUPS(mmc_dev);
 
-/*
- * This currently matches any MMC driver to any MMC card - drivers
- * themselves make the decision whether to drive this card in their
- * probe method.
- */
-static int mmc_bus_match(struct device *dev, struct device_driver *drv)
-{
-	return 1;
-}
-
 static int
 mmc_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
@@ -226,7 +216,6 @@ static const struct dev_pm_ops mmc_bus_pm_ops = {
 static struct bus_type mmc_bus_type = {
 	.name		= "mmc",
 	.dev_groups	= mmc_dev_groups,
-	.match		= mmc_bus_match,
 	.uevent		= mmc_bus_uevent,
 	.probe		= mmc_bus_probe,
 	.remove		= mmc_bus_remove,

drivers/mmc/core/card.h

@@ -59,6 +59,9 @@ struct mmc_fixup {
 	/* for MMC cards */
 	unsigned int ext_csd_rev;
 
+	/* Match against functions declared in device tree */
+	const char *of_compatible;
+
 	void (*vendor_fixup)(struct mmc_card *card, int data);
 	int data;
 };
@@ -119,6 +122,21 @@ struct mmc_fixup {
 		   _vendor, _device,					\
 		   _fixup, _data, EXT_CSD_REV_ANY)			\
 
+#define SDIO_FIXUP_COMPATIBLE(_compatible, _fixup, _data)		\
+	{						\
+		.name = CID_NAME_ANY,			\
+		.manfid = CID_MANFID_ANY,		\
+		.oemid = CID_OEMID_ANY,			\
+		.rev_start = 0,				\
+		.rev_end = -1ull,			\
+		.cis_vendor = SDIO_ANY_ID,		\
+		.cis_device = SDIO_ANY_ID,		\
+		.vendor_fixup = (_fixup),		\
+		.data = (_data),			\
+		.ext_csd_rev = EXT_CSD_REV_ANY,		\
+		.of_compatible = _compatible,	\
+	}
+
 #define cid_rev(hwrev, fwrev, year, month)	\
 	(((u64) hwrev) << 40 |			\
 	 ((u64) fwrev) << 32 |			\
@@ -150,6 +168,24 @@ static inline void __maybe_unused add_limit_rate_quirk(struct mmc_card *card,
 	card->quirk_max_rate = data;
 }
 
+static inline void __maybe_unused wl1251_quirk(struct mmc_card *card,
+					       int data)
+{
+	/*
+	 * We have TI wl1251 attached to this mmc. Pass this
+	 * information to the SDIO core because it can't be
+	 * probed by normal methods.
+	 */
+
+	dev_info(card->host->parent, "found wl1251\n");
+	card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+	card->cccr.wide_bus = 1;
+	card->cis.vendor = 0x104c;
+	card->cis.device = 0x9066;
+	card->cis.blksize = 512;
+	card->cis.max_dtr = 24000000;
+}
+
 /*
  * Quirk add/remove for MMC products.
  */

drivers/mmc/core/mmc.c

@@ -1962,7 +1962,7 @@ static int mmc_sleep(struct mmc_host *host)
 		goto out_release;
 	}
 
-	err = __mmc_poll_for_busy(card, timeout_ms, &mmc_sleep_busy_cb, host);
+	err = __mmc_poll_for_busy(host, timeout_ms, &mmc_sleep_busy_cb, host);
 
 out_release:
 	mmc_retune_release(host);

drivers/mmc/core/mmc_ops.c

@@ -58,6 +58,12 @@ struct mmc_busy_data {
 	enum mmc_busy_cmd busy_cmd;
 };
 
+struct mmc_op_cond_busy_data {
+	struct mmc_host *host;
+	u32 ocr;
+	struct mmc_command *cmd;
+};
+
 int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries)
 {
 	int err;
@@ -173,32 +179,31 @@ int mmc_go_idle(struct mmc_host *host)
 	return err;
 }
 
-int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+static int __mmc_send_op_cond_cb(void *cb_data, bool *busy)
 {
-	struct mmc_command cmd = {};
-	int i, err = 0;
+	struct mmc_op_cond_busy_data *data = cb_data;
+	struct mmc_host *host = data->host;
+	struct mmc_command *cmd = data->cmd;
+	u32 ocr = data->ocr;
+	int err = 0;
 
-	cmd.opcode = MMC_SEND_OP_COND;
-	cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
-	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
-
-	for (i = 100; i; i--) {
-		err = mmc_wait_for_cmd(host, &cmd, 0);
+	err = mmc_wait_for_cmd(host, cmd, 0);
 	if (err)
-			break;
+		return err;
 
-		/* wait until reset completes */
 	if (mmc_host_is_spi(host)) {
-			if (!(cmd.resp[0] & R1_SPI_IDLE))
-				break;
+		if (!(cmd->resp[0] & R1_SPI_IDLE)) {
+			*busy = false;
+			return 0;
+		}
 	} else {
-			if (cmd.resp[0] & MMC_CARD_BUSY)
-				break;
+		if (cmd->resp[0] & MMC_CARD_BUSY) {
+			*busy = false;
+			return 0;
+		}
 	}
 
-		err = -ETIMEDOUT;
-
-		mmc_delay(10);
+	*busy = true;
 
 	/*
 	 * According to eMMC specification v5.1 section 6.4.3, we
@@ -208,8 +213,28 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 	 * the eMMC device is busy.
 	 */
 	if (!ocr && !mmc_host_is_spi(host))
-			cmd.arg = cmd.resp[0] | BIT(30);
-	}
+		cmd->arg = cmd->resp[0] | BIT(30);
+
+	return 0;
+}
+
+int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
+{
+	struct mmc_command cmd = {};
+	int err = 0;
+	struct mmc_op_cond_busy_data cb_data = {
+		.host = host,
+		.ocr = ocr,
+		.cmd = &cmd
+	};
+
+	cmd.opcode = MMC_SEND_OP_COND;
+	cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
+
+	err = __mmc_poll_for_busy(host, 1000, &__mmc_send_op_cond_cb, &cb_data);
+	if (err)
+		return err;
 
 	if (rocr && !mmc_host_is_spi(host))
 		*rocr = cmd.resp[0];
@@ -470,11 +495,10 @@ static int mmc_busy_cb(void *cb_data, bool *busy)
 	return 0;
 }
 
-int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+int __mmc_poll_for_busy(struct mmc_host *host, unsigned int timeout_ms,
 			int (*busy_cb)(void *cb_data, bool *busy),
 			void *cb_data)
 {
-	struct mmc_host *host = card->host;
 	int err;
 	unsigned long timeout;
 	unsigned int udelay = 32, udelay_max = 32768;
@@ -515,13 +539,14 @@ EXPORT_SYMBOL_GPL(__mmc_poll_for_busy);
 int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
 		      bool retry_crc_err, enum mmc_busy_cmd busy_cmd)
 {
+	struct mmc_host *host = card->host;
 	struct mmc_busy_data cb_data;
 
 	cb_data.card = card;
 	cb_data.retry_crc_err = retry_crc_err;
 	cb_data.busy_cmd = busy_cmd;
 
-	return __mmc_poll_for_busy(card, timeout_ms, &mmc_busy_cb, &cb_data);
+	return __mmc_poll_for_busy(host, timeout_ms, &mmc_busy_cb, &cb_data);
 }
 EXPORT_SYMBOL_GPL(mmc_poll_for_busy);
 

drivers/mmc/core/mmc_ops.h

@@ -41,7 +41,7 @@ int mmc_can_ext_csd(struct mmc_card *card);
 int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
 bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
 			  unsigned int timeout_ms);
-int __mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
+int __mmc_poll_for_busy(struct mmc_host *host, unsigned int timeout_ms,
 			int (*busy_cb)(void *cb_data, bool *busy),
 			void *cb_data);
 int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,

drivers/mmc/core/pwrseq_simple.c

@@ -54,7 +54,7 @@ static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
 		gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
 					       reset_gpios->info, values);
 
-		kfree(values);
+		bitmap_free(values);
 	}
 }
 

drivers/mmc/core/queue.c

@@ -234,7 +234,7 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx,
 	enum mmc_issue_type issue_type;
 	enum mmc_issued issued;
 	bool get_card, cqe_retune_ok;
-	int ret;
+	blk_status_t ret;
 
 	if (mmc_card_removed(mq->card)) {
 		req->rq_flags |= RQF_QUIET;

drivers/mmc/core/quirks.h

@@ -10,6 +10,7 @@
  *
  */
 
+#include <linux/of.h>
 #include <linux/mmc/sdio_ids.h>
 
 #include "card.h"
@@ -145,6 +146,25 @@ static const struct mmc_fixup __maybe_unused sdio_fixup_methods[] = {
 	END_FIXUP
 };
 
+static const struct mmc_fixup __maybe_unused sdio_card_init_methods[] = {
+	SDIO_FIXUP_COMPATIBLE("ti,wl1251", wl1251_quirk, 0),
+
+	END_FIXUP
+};
+
+static inline bool mmc_fixup_of_compatible_match(struct mmc_card *card,
+						 const char *compatible)
+{
+	struct device_node *np;
+
+	for_each_child_of_node(mmc_dev(card->host)->of_node, np) {
+		if (of_device_is_compatible(np, compatible))
+			return true;
+	}
+
+	return false;
+}
+
 static inline void mmc_fixup_device(struct mmc_card *card,
 				    const struct mmc_fixup *table)
 {
@@ -152,22 +172,32 @@ static inline void mmc_fixup_device(struct mmc_card *card,
 	u64 rev = cid_rev_card(card);
 
 	for (f = table; f->vendor_fixup; f++) {
-		if ((f->manfid == CID_MANFID_ANY ||
-		     f->manfid == card->cid.manfid) &&
-		    (f->oemid == CID_OEMID_ANY ||
-		     f->oemid == card->cid.oemid) &&
-		    (f->name == CID_NAME_ANY ||
-		     !strncmp(f->name, card->cid.prod_name,
-			      sizeof(card->cid.prod_name))) &&
-		    (f->cis_vendor == card->cis.vendor ||
-		     f->cis_vendor == (u16) SDIO_ANY_ID) &&
-		    (f->cis_device == card->cis.device ||
-		     f->cis_device == (u16) SDIO_ANY_ID) &&
-		    (f->ext_csd_rev == EXT_CSD_REV_ANY ||
-		     f->ext_csd_rev == card->ext_csd.rev) &&
-		    rev >= f->rev_start && rev <= f->rev_end) {
+		if (f->manfid != CID_MANFID_ANY &&
+		    f->manfid != card->cid.manfid)
+			continue;
+		if (f->oemid != CID_OEMID_ANY &&
+		    f->oemid != card->cid.oemid)
+			continue;
+		if (f->name != CID_NAME_ANY &&
+		    strncmp(f->name, card->cid.prod_name,
+			    sizeof(card->cid.prod_name)))
+			continue;
+		if (f->cis_vendor != (u16)SDIO_ANY_ID &&
+		    f->cis_vendor != card->cis.vendor)
+			continue;
+		if (f->cis_device != (u16)SDIO_ANY_ID &&
+		    f->cis_device != card->cis.device)
+			continue;
+		if (f->ext_csd_rev != EXT_CSD_REV_ANY &&
+		    f->ext_csd_rev != card->ext_csd.rev)
+			continue;
+		if (rev < f->rev_start || rev > f->rev_end)
+			continue;
+		if (f->of_compatible &&
+		    !mmc_fixup_of_compatible_match(card, f->of_compatible))
+			continue;
+
 		dev_dbg(&card->dev, "calling %ps\n", f->vendor_fixup);
 		f->vendor_fixup(card, f->data);
 	}
-	}
 }

drivers/mmc/core/sd.c

@@ -1666,7 +1666,7 @@ static int sd_poweroff_notify(struct mmc_card *card)
 
 	cb_data.card = card;
 	cb_data.reg_buf = reg_buf;
-	err = __mmc_poll_for_busy(card, SD_POWEROFF_NOTIFY_TIMEOUT_MS,
+	err = __mmc_poll_for_busy(card->host, SD_POWEROFF_NOTIFY_TIMEOUT_MS,
 				  &sd_busy_poweroff_notify_cb, &cb_data);
 
 out:

drivers/mmc/core/sdio.c

@@ -707,6 +707,9 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if (host->ops->init_card)
 		host->ops->init_card(host, card);
+	mmc_fixup_device(card, sdio_card_init_methods);
+
+	card->ocr = ocr_card;
 
 	/*
 	 * If the host and card support UHS-I mode request the card
@@ -820,7 +823,7 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 			goto mismatch;
 		}
 	}
-	card->ocr = ocr_card;
+
 	mmc_fixup_device(card, sdio_fixup_methods);
 
 	if (card->type == MMC_TYPE_SD_COMBO) {

drivers/mmc/host/au1xmmc.c

@@ -969,8 +969,10 @@ static int au1xmmc_probe(struct platform_device *pdev)
 	}
 
 	host->irq = platform_get_irq(pdev, 0);
-	if (host->irq < 0)
+	if (host->irq < 0) {
+		ret = host->irq;
 		goto out3;
+	}
 
 	mmc->ops = &au1xmmc_ops;
 

drivers/mmc/host/dw_mmc-exynos.c

@@ -28,6 +28,7 @@ enum dw_mci_exynos_type {
 	DW_MCI_TYPE_EXYNOS5420_SMU,
 	DW_MCI_TYPE_EXYNOS7,
 	DW_MCI_TYPE_EXYNOS7_SMU,
+	DW_MCI_TYPE_ARTPEC8,
 };
 
 /* Exynos implementation specific driver private data */
@@ -69,6 +70,9 @@ static struct dw_mci_exynos_compatible {
 	}, {
 		.compatible	= "samsung,exynos7-dw-mshc-smu",
 		.ctrl_type	= DW_MCI_TYPE_EXYNOS7_SMU,
+	}, {
+		.compatible	= "axis,artpec8-dw-mshc",
+		.ctrl_type	= DW_MCI_TYPE_ARTPEC8,
 	},
 };
 
@@ -81,7 +85,8 @@ static inline u8 dw_mci_exynos_get_ciu_div(struct dw_mci *host)
 	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
 		return EXYNOS4210_FIXED_CIU_CLK_DIV;
 	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-			priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+			priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+			priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL64)) + 1;
 	else
 		return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL)) + 1;
@@ -122,6 +127,11 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
 				DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl);
 	}
 
+	if (priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) {
+		/* Quirk needed for the ARTPEC-8 SoC */
+		host->quirks |= DW_MMC_QUIRK_EXTENDED_TMOUT;
+	}
+
 	host->bus_hz /= (priv->ciu_div + 1);
 
 	return 0;
@@ -133,7 +143,8 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
 	u32 clksel;
 
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		clksel = mci_readl(host, CLKSEL64);
 	else
 		clksel = mci_readl(host, CLKSEL);
@@ -141,7 +152,8 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
 	clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing;
 
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		mci_writel(host, CLKSEL64, clksel);
 	else
 		mci_writel(host, CLKSEL, clksel);
@@ -210,14 +222,16 @@ static int dw_mci_exynos_resume_noirq(struct device *dev)
 		return ret;
 
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		clksel = mci_readl(host, CLKSEL64);
 	else
 		clksel = mci_readl(host, CLKSEL);
 
 	if (clksel & SDMMC_CLKSEL_WAKEUP_INT) {
 		if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-			priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+			priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+			priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 			mci_writel(host, CLKSEL64, clksel);
 		else
 			mci_writel(host, CLKSEL, clksel);
@@ -238,7 +252,8 @@ static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
 	 * Not supported to configure register
 	 * related to HS400
 	 */
-	if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) {
+	if ((priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420) ||
+		(priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)) {
 		if (timing == MMC_TIMING_MMC_HS400)
 			dev_warn(host->dev,
 				 "cannot configure HS400, unsupported chipset\n");
@@ -394,7 +409,8 @@ static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)
 	struct dw_mci_exynos_priv_data *priv = host->priv;
 
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64));
 	else
 		return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
@@ -406,13 +422,15 @@ static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
 	struct dw_mci_exynos_priv_data *priv = host->priv;
 
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		clksel = mci_readl(host, CLKSEL64);
 	else
 		clksel = mci_readl(host, CLKSEL);
 	clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		mci_writel(host, CLKSEL64, clksel);
 	else
 		mci_writel(host, CLKSEL, clksel);
@@ -425,7 +443,8 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
 	u8 sample;
 
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		clksel = mci_readl(host, CLKSEL64);
 	else
 		clksel = mci_readl(host, CLKSEL);
@@ -434,7 +453,8 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
 	clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
 
 	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU ||
+		priv->ctrl_type == DW_MCI_TYPE_ARTPEC8)
 		mci_writel(host, CLKSEL64, clksel);
 	else
 		mci_writel(host, CLKSEL, clksel);
@@ -524,17 +544,65 @@ static int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host,
 	return 0;
 }
 
+static void dw_mci_exynos_set_data_timeout(struct dw_mci *host,
+					   unsigned int timeout_ns)
+{
+	u32 clk_div, tmout;
+	u64 tmp;
+	unsigned int tmp2;
+
+	clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2;
+	if (clk_div == 0)
+		clk_div = 1;
+
+	tmp = DIV_ROUND_UP_ULL((u64)timeout_ns * host->bus_hz, NSEC_PER_SEC);
+	tmp = DIV_ROUND_UP_ULL(tmp, clk_div);
+
+	/* TMOUT[7:0] (RESPONSE_TIMEOUT) */
+	tmout = 0xFF; /* Set maximum */
+
+	/*
+	 * Extended HW timer (max = 0x6FFFFF2):
+	 * ((TMOUT[10:8] - 1) * 0xFFFFFF + TMOUT[31:11] * 8)
+	 */
+	if (!tmp || tmp > 0x6FFFFF2)
+		tmout |= (0xFFFFFF << 8);
+	else {
+		/* TMOUT[10:8] */
+		tmp2 = (((unsigned int)tmp / 0xFFFFFF) + 1) & 0x7;
+		tmout |= tmp2 << 8;
+
+		/* TMOUT[31:11] */
+		tmp = tmp - ((tmp2 - 1) * 0xFFFFFF);
+		tmout |= (tmp & 0xFFFFF8) << 8;
+	}
+
+	mci_writel(host, TMOUT, tmout);
+	dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: %#08x",
+		timeout_ns, tmout >> 8);
+}
+
+static u32 dw_mci_exynos_get_drto_clks(struct dw_mci *host)
+{
+	u32 drto_clks;
+
+	drto_clks = mci_readl(host, TMOUT) >> 8;
+
+	return (((drto_clks & 0x7) - 1) * 0xFFFFFF) + ((drto_clks & 0xFFFFF8));
+}
+
 /* Common capabilities of Exynos4/Exynos5 SoC */
 static unsigned long exynos_dwmmc_caps[4] = {
-	MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
-	MMC_CAP_CMD23,
-	MMC_CAP_CMD23,
-	MMC_CAP_CMD23,
+	MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA,
+	0,
+	0,
+	0,
 };
 
 static const struct dw_mci_drv_data exynos_drv_data = {
 	.caps			= exynos_dwmmc_caps,
 	.num_caps		= ARRAY_SIZE(exynos_dwmmc_caps),
+	.common_caps		= MMC_CAP_CMD23,
 	.init			= dw_mci_exynos_priv_init,
 	.set_ios		= dw_mci_exynos_set_ios,
 	.parse_dt		= dw_mci_exynos_parse_dt,
@@ -542,6 +610,16 @@ static const struct dw_mci_drv_data exynos_drv_data = {
 	.prepare_hs400_tuning	= dw_mci_exynos_prepare_hs400_tuning,
 };
 
+static const struct dw_mci_drv_data artpec_drv_data = {
+	.common_caps		= MMC_CAP_CMD23,
+	.init			= dw_mci_exynos_priv_init,
+	.set_ios		= dw_mci_exynos_set_ios,
+	.parse_dt		= dw_mci_exynos_parse_dt,
+	.execute_tuning		= dw_mci_exynos_execute_tuning,
+	.set_data_timeout		= dw_mci_exynos_set_data_timeout,
+	.get_drto_clks		= dw_mci_exynos_get_drto_clks,
+};
+
 static const struct of_device_id dw_mci_exynos_match[] = {
 	{ .compatible = "samsung,exynos4412-dw-mshc",
 			.data = &exynos_drv_data, },
@@ -555,6 +633,8 @@ static const struct of_device_id dw_mci_exynos_match[] = {
 			.data = &exynos_drv_data, },
 	{ .compatible = "samsung,exynos7-dw-mshc-smu",
 			.data = &exynos_drv_data, },
+	{ .compatible = "axis,artpec8-dw-mshc",
+			.data = &artpec_drv_data, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);

drivers/mmc/host/dw_mmc-hi3798cv200.c

@@ -23,12 +23,6 @@ struct hi3798cv200_priv {
 	struct clk *drive_clk;
 };
 
-static unsigned long dw_mci_hi3798cv200_caps[] = {
-	MMC_CAP_CMD23,
-	MMC_CAP_CMD23,
-	MMC_CAP_CMD23
-};
-
 static void dw_mci_hi3798cv200_set_ios(struct dw_mci *host, struct mmc_ios *ios)
 {
 	struct hi3798cv200_priv *priv = host->priv;
@@ -166,8 +160,7 @@ static int dw_mci_hi3798cv200_init(struct dw_mci *host)
 }
 
 static const struct dw_mci_drv_data hi3798cv200_data = {
-	.caps = dw_mci_hi3798cv200_caps,
-	.num_caps = ARRAY_SIZE(dw_mci_hi3798cv200_caps),
+	.common_caps = MMC_CAP_CMD23,
 	.init = dw_mci_hi3798cv200_init,
 	.set_ios = dw_mci_hi3798cv200_set_ios,
 	.execute_tuning = dw_mci_hi3798cv200_execute_tuning,

drivers/mmc/host/dw_mmc-rockchip.c

@@ -300,21 +300,12 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
 	return 0;
 }
 
-/* Common capabilities of RK3288 SoC */
-static unsigned long dw_mci_rk3288_dwmmc_caps[4] = {
-	MMC_CAP_CMD23,
-	MMC_CAP_CMD23,
-	MMC_CAP_CMD23,
-	MMC_CAP_CMD23,
-};
-
 static const struct dw_mci_drv_data rk2928_drv_data = {
 	.init			= dw_mci_rockchip_init,
 };
 
 static const struct dw_mci_drv_data rk3288_drv_data = {
-	.caps			= dw_mci_rk3288_dwmmc_caps,
-	.num_caps		= ARRAY_SIZE(dw_mci_rk3288_dwmmc_caps),
+	.common_caps		= MMC_CAP_CMD23,
 	.set_ios		= dw_mci_rk3288_set_ios,
 	.execute_tuning		= dw_mci_rk3288_execute_tuning,
 	.parse_dt		= dw_mci_rk3288_parse_dt,

drivers/mmc/host/dw_mmc.c

@@ -335,7 +335,8 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
 	    cmdr == MMC_WRITE_BLOCK ||
 	    cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
 	    cmdr == MMC_SEND_TUNING_BLOCK ||
-	    cmdr == MMC_SEND_TUNING_BLOCK_HS200) {
+	    cmdr == MMC_SEND_TUNING_BLOCK_HS200 ||
+	    cmdr == MMC_GEN_CMD) {
 		stop->opcode = MMC_STOP_TRANSMISSION;
 		stop->arg = 0;
 		stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
@@ -1283,6 +1284,37 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
 	mci_writel(host, CTYPE, (slot->ctype << slot->id));
 }
 
+static void dw_mci_set_data_timeout(struct dw_mci *host,
+				    unsigned int timeout_ns)
+{
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
+	u32 clk_div, tmout;
+	u64 tmp;
+
+	if (drv_data && drv_data->set_data_timeout)
+		return drv_data->set_data_timeout(host, timeout_ns);
+
+	clk_div = (mci_readl(host, CLKDIV) & 0xFF) * 2;
+	if (clk_div == 0)
+		clk_div = 1;
+
+	tmp = DIV_ROUND_UP_ULL((u64)timeout_ns * host->bus_hz, NSEC_PER_SEC);
+	tmp = DIV_ROUND_UP_ULL(tmp, clk_div);
+
+	/* TMOUT[7:0] (RESPONSE_TIMEOUT) */
+	tmout = 0xFF; /* Set maximum */
+
+	/* TMOUT[31:8] (DATA_TIMEOUT) */
+	if (!tmp || tmp > 0xFFFFFF)
+		tmout |= (0xFFFFFF << 8);
+	else
+		tmout |= (tmp & 0xFFFFFF) << 8;
+
+	mci_writel(host, TMOUT, tmout);
+	dev_dbg(host->dev, "timeout_ns: %u => TMOUT[31:8]: %#08x",
+		timeout_ns, tmout >> 8);
+}
+
 static void __dw_mci_start_request(struct dw_mci *host,
 				   struct dw_mci_slot *slot,
 				   struct mmc_command *cmd)
@@ -1303,7 +1335,7 @@ static void __dw_mci_start_request(struct dw_mci *host,
 
 	data = cmd->data;
 	if (data) {
-		mci_writel(host, TMOUT, 0xFFFFFFFF);
+		dw_mci_set_data_timeout(host, data->timeout_ns);
 		mci_writel(host, BYTCNT, data->blksz*data->blocks);
 		mci_writel(host, BLKSIZ, data->blksz);
 	}
@@ -1967,11 +1999,15 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
 
 static void dw_mci_set_drto(struct dw_mci *host)
 {
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
 	unsigned int drto_clks;
 	unsigned int drto_div;
 	unsigned int drto_ms;
 	unsigned long irqflags;
 
+	if (drv_data && drv_data->get_drto_clks)
+		drto_clks = drv_data->get_drto_clks(host);
+	else
 		drto_clks = mci_readl(host, TMOUT) >> 8;
 	drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2;
 	if (drto_div == 0)
@@ -1980,6 +2016,8 @@ static void dw_mci_set_drto(struct dw_mci *host)
 	drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,
 				   host->bus_hz);
 
+	dev_dbg(host->dev, "drto_ms: %u\n", drto_ms);
+
 	/* add a bit spare time */
 	drto_ms += 10;
 
@@ -2724,11 +2762,20 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		if (pending & DW_MCI_DATA_ERROR_FLAGS) {
 			spin_lock(&host->irq_lock);
 
+			if (host->quirks & DW_MMC_QUIRK_EXTENDED_TMOUT)
+				del_timer(&host->dto_timer);
+
 			/* if there is an error report DATA_ERROR */
 			mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
 			host->data_status = pending;
 			smp_wmb(); /* drain writebuffer */
 			set_bit(EVENT_DATA_ERROR, &host->pending_events);
+
+			if (host->quirks & DW_MMC_QUIRK_EXTENDED_TMOUT)
+				/* In case of error, we cannot expect a DTO */
+				set_bit(EVENT_DATA_COMPLETE,
+					&host->pending_events);
+
 			tasklet_schedule(&host->tasklet);
 
 			spin_unlock(&host->irq_lock);
@@ -2828,6 +2875,9 @@ static int dw_mci_init_slot_caps(struct dw_mci_slot *slot)
 	if (host->pdata->pm_caps)
 		mmc->pm_caps = host->pdata->pm_caps;
 
+	if (drv_data)
+		mmc->caps |= drv_data->common_caps;
+
 	if (host->dev->of_node) {
 		ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
 		if (ctrl_id < 0)

drivers/mmc/host/dw_mmc.h

@@ -118,6 +118,7 @@ struct dw_mci_dma_slave {
  * @part_buf: Simple buffer for partial fifo reads/writes.
  * @push_data: Pointer to FIFO push function.
  * @pull_data: Pointer to FIFO pull function.
+ * @quirks: Set of quirks that apply to specific versions of the IP.
  * @vqmmc_enabled: Status of vqmmc, should be true or false.
  * @irq_flags: The flags to be passed to request_irq.
  * @irq: The irq value to be passed to request_irq.
@@ -223,6 +224,7 @@ struct dw_mci {
 	void (*push_data)(struct dw_mci *host, void *buf, int cnt);
 	void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
 
+	u32			quirks;
 	bool			vqmmc_enabled;
 	unsigned long		irq_flags; /* IRQ flags */
 	int			irq;
@@ -274,6 +276,9 @@ struct dw_mci_board {
 	struct dma_pdata *data;
 };
 
+/* Support for longer data read timeout */
+#define DW_MMC_QUIRK_EXTENDED_TMOUT            BIT(0)
+
 #define DW_MMC_240A		0x240a
 #define DW_MMC_280A		0x280a
 
@@ -550,10 +555,14 @@ struct dw_mci_slot {
  * dw_mci driver data - dw-mshc implementation specific driver data.
  * @caps: mmc subsystem specified capabilities of the controller(s).
  * @num_caps: number of capabilities specified by @caps.
+ * @common_caps: mmc subsystem specified capabilities applicable to all of
+ *	the controllers
  * @init: early implementation specific initialization.
  * @set_ios: handle bus specific extensions.
  * @parse_dt: parse implementation specific device tree properties.
  * @execute_tuning: implementation specific tuning procedure.
+ * @set_data_timeout: implementation specific timeout.
+ * @get_drto_clks: implementation specific cycle count for data read timeout.
  *
  * Provide controller implementation specific extensions. The usage of this
  * data structure is fully optional and usage of each member in this structure
@@ -562,6 +571,7 @@ struct dw_mci_slot {
 struct dw_mci_drv_data {
 	unsigned long	*caps;
 	u32		num_caps;
+	u32		common_caps;
 	int		(*init)(struct dw_mci *host);
 	void		(*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
 	int		(*parse_dt)(struct dw_mci *host);
@@ -570,5 +580,8 @@ struct dw_mci_drv_data {
 						struct mmc_ios *ios);
 	int		(*switch_voltage)(struct mmc_host *mmc,
 					  struct mmc_ios *ios);
+	void		(*set_data_timeout)(struct dw_mci *host,
+					  unsigned int timeout_ns);
+	u32		(*get_drto_clks)(struct dw_mci *host);
 };
 #endif /* _DW_MMC_H_ */

drivers/mmc/host/jz4740_mmc.c

@@ -217,11 +217,23 @@ static void jz4740_mmc_release_dma_channels(struct jz4740_mmc_host *host)
 		return;
 
 	dma_release_channel(host->dma_tx);
+	if (host->dma_rx)
 		dma_release_channel(host->dma_rx);
 }
 
 static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
 {
+	struct device *dev = mmc_dev(host->mmc);
+
+	host->dma_tx = dma_request_chan(dev, "tx-rx");
+	if (!IS_ERR(host->dma_tx))
+		return 0;
+
+	if (PTR_ERR(host->dma_tx) != -ENODEV) {
+		dev_err(dev, "Failed to get dma tx-rx channel\n");
+		return PTR_ERR(host->dma_tx);
+	}
+
 	host->dma_tx = dma_request_chan(mmc_dev(host->mmc), "tx");
 	if (IS_ERR(host->dma_tx)) {
 		dev_err(mmc_dev(host->mmc), "Failed to get dma_tx channel\n");
@@ -241,7 +253,10 @@ static int jz4740_mmc_acquire_dma_channels(struct jz4740_mmc_host *host)
 static inline struct dma_chan *jz4740_mmc_get_dma_chan(struct jz4740_mmc_host *host,
 						       struct mmc_data *data)
 {
-	return (data->flags & MMC_DATA_READ) ? host->dma_rx : host->dma_tx;
+	if ((data->flags & MMC_DATA_READ) && host->dma_rx)
+		return host->dma_rx;
+	else
+		return host->dma_tx;
 }
 
 static void jz4740_mmc_dma_unmap(struct jz4740_mmc_host *host,

drivers/mmc/host/meson-mx-sdhc-clkc.c

@@ -12,8 +12,6 @@
 
 #include "meson-mx-sdhc.h"
 
-#define MESON_SDHC_NUM_BUILTIN_CLKS	6
-
 struct meson_mx_sdhc_clkc {
 	struct clk_mux			src_sel;
 	struct clk_divider		div;

drivers/mmc/host/meson-mx-sdhc-mmc.c

@@ -854,6 +854,11 @@ static int meson_mx_sdhc_probe(struct platform_device *pdev)
 		goto err_disable_pclk;
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto err_disable_pclk;
+	}
+
 	ret = devm_request_threaded_irq(dev, irq, meson_mx_sdhc_irq,
 					meson_mx_sdhc_irq_thread, IRQF_ONESHOT,
 					NULL, host);

drivers/mmc/host/meson-mx-sdio.c

@@ -662,6 +662,11 @@ static int meson_mx_mmc_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto error_free_mmc;
+	}
+
 	ret = devm_request_threaded_irq(host->controller_dev, irq,
 					meson_mx_mmc_irq,
 					meson_mx_mmc_irq_thread, IRQF_ONESHOT,

drivers/mmc/host/mmc_spi.c

@@ -547,7 +547,7 @@ mmc_spi_command_send(struct mmc_spi_host *host,
 static void
 mmc_spi_setup_data_message(
 	struct mmc_spi_host	*host,
-	int			multiple,
+	bool			multiple,
 	enum dma_data_direction	direction)
 {
 	struct spi_transfer	*t;
@@ -859,14 +859,14 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
 	struct spi_device	*spi = host->spi;
 	struct device		*dma_dev = host->dma_dev;
 	struct spi_transfer	*t;
-	enum dma_data_direction	direction;
+	enum dma_data_direction	direction = mmc_get_dma_dir(data);
 	struct scatterlist	*sg;
 	unsigned		n_sg;
-	int			multiple = (data->blocks > 1);
+	bool			multiple = (data->blocks > 1);
+	const char		*write_or_read = (direction == DMA_TO_DEVICE) ? "write" : "read";
 	u32			clock_rate;
 	unsigned long		timeout;
 
-	direction = mmc_get_dma_dir(data);
 	mmc_spi_setup_data_message(host, multiple, direction);
 	t = &host->t;
 
@@ -921,9 +921,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
 		while (length) {
 			t->len = min(length, blk_size);
 
-			dev_dbg(&host->spi->dev, "    %s block, %d bytes\n",
-				(direction == DMA_TO_DEVICE) ? "write" : "read",
-				t->len);
+			dev_dbg(&spi->dev, "    %s block, %d bytes\n", write_or_read, t->len);
 
 			if (direction == DMA_TO_DEVICE)
 				status = mmc_spi_writeblock(host, t, timeout);
@@ -948,9 +946,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
 
 		if (status < 0) {
 			data->error = status;
-			dev_dbg(&spi->dev, "%s status %d\n",
-				(direction == DMA_TO_DEVICE) ? "write" : "read",
-				status);
+			dev_dbg(&spi->dev, "%s status %d\n", write_or_read, status);
 			break;
 		}
 	}

drivers/mmc/host/mmci.c

@@ -280,7 +280,7 @@ static struct variant_data variant_stm32_sdmmc = {
 static struct variant_data variant_stm32_sdmmcv2 = {
 	.fifosize		= 16 * 4,
 	.fifohalfsize		= 8 * 4,
-	.f_max			= 208000000,
+	.f_max			= 267000000,
 	.stm32_clkdiv		= true,
 	.cmdreg_cpsm_enable	= MCI_CPSM_STM32_ENABLE,
 	.cmdreg_lrsp_crc	= MCI_CPSM_STM32_LRSP_CRC,
@@ -2435,6 +2435,11 @@ static const struct amba_id mmci_ids[] = {
 		.mask	= 0xf0ffffff,
 		.data	= &variant_stm32_sdmmcv2,
 	},
+	{
+		.id     = 0x20253180,
+		.mask	= 0xf0ffffff,
+		.data	= &variant_stm32_sdmmcv2,
+	},
 	/* Qualcomm variants */
 	{
 		.id     = 0x00051180,

drivers/mmc/host/mmci_stm32_sdmmc.c

@@ -241,11 +241,12 @@ static void mmci_sdmmc_set_clkreg(struct mmci_host *host, unsigned int desired)
 
 	/*
 	 * SDMMC_FBCK is selected when an external Delay Block is needed
-	 * with SDR104.
+	 * with SDR104 or HS200.
 	 */
 	if (host->mmc->ios.timing >= MMC_TIMING_UHS_SDR50) {
 		clk |= MCI_STM32_CLK_BUSSPEED;
-		if (host->mmc->ios.timing == MMC_TIMING_UHS_SDR104) {
+		if (host->mmc->ios.timing == MMC_TIMING_UHS_SDR104 ||
+		    host->mmc->ios.timing == MMC_TIMING_MMC_HS200) {
 			clk &= ~MCI_STM32_CLK_SEL_MSK;
 			clk |= MCI_STM32_CLK_SELFBCK;
 		}

drivers/mmc/host/omap_hsmmc.c

@@ -1499,41 +1499,6 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	omap_hsmmc_set_bus_mode(host);
 }
 
-static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
-{
-	struct omap_hsmmc_host *host = mmc_priv(mmc);
-
-	if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
-		struct device_node *np = mmc_dev(mmc)->of_node;
-
-		/*
-		 * REVISIT: should be moved to sdio core and made more
-		 * general e.g. by expanding the DT bindings of child nodes
-		 * to provide a mechanism to provide this information:
-		 * Documentation/devicetree/bindings/mmc/mmc-card.yaml
-		 */
-
-		np = of_get_compatible_child(np, "ti,wl1251");
-		if (np) {
-			/*
-			 * We have TI wl1251 attached to MMC3. Pass this
-			 * information to the SDIO core because it can't be
-			 * probed by normal methods.
-			 */
-
-			dev_info(host->dev, "found wl1251\n");
-			card->quirks |= MMC_QUIRK_NONSTD_SDIO;
-			card->cccr.wide_bus = 1;
-			card->cis.vendor = 0x104c;
-			card->cis.device = 0x9066;
-			card->cis.blksize = 512;
-			card->cis.max_dtr = 24000000;
-			card->ocr = 0x80;
-			of_node_put(np);
-		}
-	}
-}
-
 static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 {
 	struct omap_hsmmc_host *host = mmc_priv(mmc);
@@ -1660,7 +1625,6 @@ static struct mmc_host_ops omap_hsmmc_ops = {
 	.set_ios = omap_hsmmc_set_ios,
 	.get_cd = mmc_gpio_get_cd,
 	.get_ro = mmc_gpio_get_ro,
-	.init_card = omap_hsmmc_init_card,
 	.enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
 };
 

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -305,6 +305,9 @@ static struct esdhc_soc_data usdhc_imx7ulp_data = {
 			| ESDHC_FLAG_PMQOS | ESDHC_FLAG_HS400
 			| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
 };
+static struct esdhc_soc_data usdhc_imxrt1050_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_HS200 | ESDHC_FLAG_ERR004536,
+};
 
 static struct esdhc_soc_data usdhc_imx8qxp_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
@@ -355,6 +358,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = {
 	{ .compatible = "fsl,imx7ulp-usdhc", .data = &usdhc_imx7ulp_data, },
 	{ .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, },
 	{ .compatible = "fsl,imx8mm-usdhc", .data = &usdhc_imx8mm_data, },
+	{ .compatible = "fsl,imxrt1050-usdhc", .data = &usdhc_imxrt1050_data, },
 	{ .compatible = "nxp,s32g2-usdhc", .data = &usdhc_s32g2_data, },
 	{ /* sentinel */ }
 };

drivers/mmc/host/sdhci-pci-core.c

@@ -1866,6 +1866,7 @@ static const struct pci_device_id pci_ids[] = {
 	SDHCI_PCI_DEVICE(INTEL, JSL_SD,    intel_byt_sd),
 	SDHCI_PCI_DEVICE(INTEL, LKF_EMMC,  intel_glk_emmc),
 	SDHCI_PCI_DEVICE(INTEL, LKF_SD,    intel_byt_sd),
+	SDHCI_PCI_DEVICE(INTEL, ADL_EMMC,  intel_glk_emmc),
 	SDHCI_PCI_DEVICE(O2, 8120,     o2),
 	SDHCI_PCI_DEVICE(O2, 8220,     o2),
 	SDHCI_PCI_DEVICE(O2, 8221,     o2),

drivers/mmc/host/sdhci-pci-gli.c

@@ -12,6 +12,7 @@
 #include <linux/pci.h>
 #include <linux/mmc/mmc.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include "sdhci.h"
 #include "sdhci-pci.h"
 #include "cqhci.h"
@@ -116,6 +117,8 @@
 #define PCI_GLI_9755_PECONF   0x44
 #define   PCI_GLI_9755_LFCLK    GENMASK(14, 12)
 #define   PCI_GLI_9755_DMACLK   BIT(29)
+#define   PCI_GLI_9755_INVERT_CD  BIT(30)
+#define   PCI_GLI_9755_INVERT_WP  BIT(31)
 
 #define PCI_GLI_9755_CFG2          0x48
 #define   PCI_GLI_9755_CFG2_L1DLY    GENMASK(28, 24)
@@ -570,6 +573,14 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
 	gl9755_wt_on(pdev);
 
 	pci_read_config_dword(pdev, PCI_GLI_9755_PECONF, &value);
+	/*
+	 * Apple ARM64 platforms using these chips may have
+	 * inverted CD/WP detection.
+	 */
+	if (of_property_read_bool(pdev->dev.of_node, "cd-inverted"))
+		value |= PCI_GLI_9755_INVERT_CD;
+	if (of_property_read_bool(pdev->dev.of_node, "wp-inverted"))
+		value |= PCI_GLI_9755_INVERT_WP;
 	value &= ~PCI_GLI_9755_LFCLK;
 	value &= ~PCI_GLI_9755_DMACLK;
 	pci_write_config_dword(pdev, PCI_GLI_9755_PECONF, value);
@@ -891,7 +902,28 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
 	return 0;
 }
 
+#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
+
+static u16 sdhci_gli_readw(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + (reg & ~3));
+	u16 word;
+
+	word = (val >> REG_OFFSET_IN_BITS(reg)) & 0xffff;
+	return word;
+}
+
+static u8 sdhci_gli_readb(struct sdhci_host *host, int reg)
+{
+	u32 val = readl(host->ioaddr + (reg & ~3));
+	u8 byte = (val >> REG_OFFSET_IN_BITS(reg)) & 0xff;
+
+	return byte;
+}
+
 static const struct sdhci_ops sdhci_gl9755_ops = {
+	.read_w			= sdhci_gli_readw,
+	.read_b			= sdhci_gli_readb,
 	.set_clock		= sdhci_gl9755_set_clock,
 	.enable_dma		= sdhci_pci_enable_dma,
 	.set_bus_width		= sdhci_set_bus_width,
@@ -911,6 +943,8 @@ const struct sdhci_pci_fixes sdhci_gl9755 = {
 };
 
 static const struct sdhci_ops sdhci_gl9750_ops = {
+	.read_w			= sdhci_gli_readw,
+	.read_b			= sdhci_gli_readb,
 	.read_l                 = sdhci_gl9750_readl,
 	.set_clock		= sdhci_gl9750_set_clock,
 	.enable_dma		= sdhci_pci_enable_dma,

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -12,6 +12,7 @@
 #include <linux/mmc/mmc.h>
 #include <linux/delay.h>
 #include <linux/iopoll.h>
+#include <linux/bitfield.h>
 
 #include "sdhci.h"
 #include "sdhci-pci.h"
@@ -43,12 +44,16 @@
 #define O2_SD_CAP_REG0		0x334
 #define O2_SD_UHS1_CAP_SETTING	0x33C
 #define O2_SD_DELAY_CTRL	0x350
+#define O2_SD_OUTPUT_CLK_SOURCE_SWITCH	0x354
 #define O2_SD_UHS2_L1_CTRL	0x35C
 #define O2_SD_FUNC_REG3		0x3E0
 #define O2_SD_FUNC_REG4		0x3E4
 #define O2_SD_LED_ENABLE	BIT(6)
 #define O2_SD_FREG0_LEDOFF	BIT(13)
+#define O2_SD_SEL_DLL		BIT(16)
 #define O2_SD_FREG4_ENABLE_CLK_SET	BIT(22)
+#define O2_SD_PHASE_MASK	GENMASK(23, 20)
+#define O2_SD_FIX_PHASE		FIELD_PREP(O2_SD_PHASE_MASK, 0x9)
 
 #define O2_SD_VENDOR_SETTING	0x110
 #define O2_SD_VENDOR_SETTING2	0x1C8
@@ -301,9 +306,13 @@ static int sdhci_o2_dll_recovery(struct sdhci_host *host)
 static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct sdhci_pci_chip *chip = slot->chip;
 	int current_bus_width = 0;
 	u32 scratch32 = 0;
 	u16 scratch = 0;
+	u8  scratch_8 = 0;
+	u32 reg_val;
 
 	/*
 	 * This handler only implements the eMMC tuning that is specific to
@@ -322,6 +331,32 @@ static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	scratch |= O2_SD_PWR_FORCE_L0;
 	sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
 
+	/* Stop clk */
+	reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	reg_val &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+
+	/* UnLock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+	scratch_8 &= 0x7f;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+	/* Set pcr 0x354[16] to choose dll clock, and set the default phase */
+	pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &reg_val);
+	reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
+	reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
+	pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
+
+	/* Lock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
+	scratch_8 |= 0x80;
+	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
+
+	/* Start clk */
+	reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	reg_val |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
+
 	/* wait DLL lock, timeout value 5ms */
 	if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
 		scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000))
@@ -533,22 +568,31 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
 	if (clock == 0)
 		return;
 
-	if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
+	/* UnLock WP */
 	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
-
 	scratch &= 0x7f;
 	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 
+	if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
 		pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
 
 		if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
 			o2_pci_set_baseclk(chip, 0x2c280000);
+	} else {
+		pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
 
-		pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
+		if ((scratch_32 & 0xFFFF0000) != 0x25100000)
+			o2_pci_set_baseclk(chip, 0x25100000);
+	}
+
+	pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
+	scratch_32 &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
+	pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
 
+	/* Lock WP */
+	pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
 	scratch |= 0x80;
 	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
-	}
 
 	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
 	sdhci_o2_enable_clk(host, clk);

drivers/mmc/host/sdhci-pci.h

@@ -59,6 +59,7 @@
 #define PCI_DEVICE_ID_INTEL_JSL_SD	0x4df8
 #define PCI_DEVICE_ID_INTEL_LKF_EMMC	0x98c4
 #define PCI_DEVICE_ID_INTEL_LKF_SD	0x98f8
+#define PCI_DEVICE_ID_INTEL_ADL_EMMC	0x54c4
 
 #define PCI_DEVICE_ID_SYSKONNECT_8000	0x8000
 #define PCI_DEVICE_ID_VIA_95D0		0x95d0

drivers/mmc/host/tmio_mmc_core.c

@@ -960,14 +960,8 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 		tmio_mmc_power_off(host);
 		/* For R-Car Gen2+, we need to reset SDHI specific SCC */
-		if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) {
-			host->reset(host);
-
-			if (host->native_hotplug)
-				tmio_mmc_enable_mmc_irqs(host,
-						TMIO_STAT_CARD_REMOVE |
-						TMIO_STAT_CARD_INSERT);
-		}
+		if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
+			tmio_mmc_reset(host);
 
 		host->set_clock(host, 0);
 		break;
@@ -1175,6 +1169,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
 	if (mmc_can_gpio_cd(mmc))
 		_host->ops.get_cd = mmc_gpio_get_cd;
 
+	/* must be set before tmio_mmc_reset() */
 	_host->native_hotplug = !(mmc_can_gpio_cd(mmc) ||
 				  mmc->caps & MMC_CAP_NEEDS_POLL ||
 				  !mmc_card_is_removable(mmc));
@@ -1295,10 +1290,6 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
 	if (host->clk_cache)
 		host->set_clock(host, host->clk_cache);
 
-	if (host->native_hotplug)
-		tmio_mmc_enable_mmc_irqs(host,
-				TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT);
-
 	tmio_mmc_enable_dma(host, true);
 
 	return 0;