Commit 1157d73d authored by Vincent Stehlé's avatar Vincent Stehlé Committed by Olof Johansson

arm: multi_v7_defconfig: add i.MX options and NFS root

- Add i.MX serial console support. This gives us the boot messages on
  UART on e.g. the i.MX6Q sabre sd platform.
- Add the necessary config options, to allow booting with NFS root on
  an i.MX6 sabre sd.
- Add Freescale LPUART serial console support. This gives us the boot
  messages on UART on e.g. the Vybrid VF610 Tower board.
Signed-off-by: default avatarVincent Stehlé <vincent.stehle@freescale.com>
Cc: Russell King <linux@arm.linux.org.uk>
[olof: squashed three commits down to one]
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent f4b96f5e
...@@ -47,6 +47,8 @@ CONFIG_ARM_APPENDED_DTB=y ...@@ -47,6 +47,8 @@ CONFIG_ARM_APPENDED_DTB=y
CONFIG_NET=y CONFIG_NET=y
CONFIG_UNIX=y CONFIG_UNIX=y
CONFIG_INET=y CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SD=y
...@@ -75,6 +77,10 @@ CONFIG_SERIAL_OMAP=y ...@@ -75,6 +77,10 @@ CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_SERIAL_OMAP_CONSOLE=y
CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_SIRF=y CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y CONFIG_I2C_TEGRA=y
...@@ -147,6 +153,10 @@ CONFIG_PWM=y ...@@ -147,6 +153,10 @@ CONFIG_PWM=y
CONFIG_PWM_VT8500=y CONFIG_PWM_VT8500=y
CONFIG_EXT4_FS=y CONFIG_EXT4_FS=y
CONFIG_TMPFS=y CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_KERNEL=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment