cxgb4: print port information after registering each netdev

Print information about each port when its netdev is registered instead
of looping separately over the ports at the end.  The bulk of this patch
is due to indentation change.
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/cxgb4/cxgb4_main.c

@@ -3490,50 +3490,41 @@ static int __devinit init_rss(struct adapter *adap)
 	return 0;
 }
 
-static void __devinit print_port_info(struct adapter *adap)
+static void __devinit print_port_info(const struct net_device *dev)
 {
 	static const char *base[] = {
 		"R XFI", "R XAUI", "T SGMII", "T XFI", "T XAUI", "KX4", "CX4",
 		"KX", "KR", "R SFP+", "KR/KX", "KR/KX/KX4"
 	};
 
-	int i;
 	char buf[80];
+	char *bufp = buf;
 	const char *spd = "";
+	const struct port_info *pi = netdev_priv(dev);
+	const struct adapter *adap = pi->adapter;
 
 	if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_2_5GB)
 		spd = " 2.5 GT/s";
 	else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_5_0GB)
 		spd = " 5 GT/s";
 
-	for_each_port(adap, i) {
-		struct net_device *dev = adap->port[i];
-		const struct port_info *pi = netdev_priv(dev);
-		char *bufp = buf;
-
-		if (!test_bit(i, &adap->registered_device_map))
-			continue;
-
-		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
-			bufp += sprintf(bufp, "100/");
-		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
-			bufp += sprintf(bufp, "1000/");
-		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
-			bufp += sprintf(bufp, "10G/");
-		if (bufp != buf)
-			--bufp;
-		sprintf(bufp, "BASE-%s", base[pi->port_type]);
-
-		netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n",
-			    adap->params.vpd.id, adap->params.rev,
-			    buf, is_offload(adap) ? "R" : "",
-			    adap->params.pci.width, spd,
-			    (adap->flags & USING_MSIX) ? " MSI-X" :
-			    (adap->flags & USING_MSI) ? " MSI" : "");
-		if (adap->name == dev->name)
-			netdev_info(dev, "S/N: %s, E/C: %s\n",
-				    adap->params.vpd.sn, adap->params.vpd.ec);
-	}
+	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
+		bufp += sprintf(bufp, "100/");
+	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
+		bufp += sprintf(bufp, "1000/");
+	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
+		bufp += sprintf(bufp, "10G/");
+	if (bufp != buf)
+		--bufp;
+	sprintf(bufp, "BASE-%s", base[pi->port_type]);
+
+	netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n",
+		    adap->params.vpd.id, adap->params.rev, buf,
+		    is_offload(adap) ? "R" : "", adap->params.pci.width, spd,
+		    (adap->flags & USING_MSIX) ? " MSI-X" :
+		    (adap->flags & USING_MSI) ? " MSI" : "");
+	netdev_info(dev, "S/N: %s, E/C: %s\n",
+		    adap->params.vpd.sn, adap->params.vpd.ec);
 }
 
 static void __devinit enable_pcie_relaxed_ordering(struct pci_dev *dev)
@@ -3753,6 +3744,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 
 			__set_bit(i, &adapter->registered_device_map);
 			adapter->chan_map[pi->tx_chan] = i;
+			print_port_info(adapter->port[i]);
 		}
 	}
 	if (!adapter->registered_device_map) {
@@ -3769,8 +3761,6 @@ static int __devinit init_one(struct pci_dev *pdev,
 	if (is_offload(adapter))
 		attach_ulds(adapter);
 
-	print_port_info(adapter);
-
 sriov:
 #ifdef CONFIG_PCI_IOV
 	if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0)