Commit 11a8e778 authored by Andi Kleen's avatar Andi Kleen Committed by Linus Torvalds

[PATCH] x86_64: Some housekeeping in local APIC code

Remove support for obsolete hardware and cleanup.

- Remove checks for non integrated APICs
- Replace apic_write_around with apic_write.
- Remove apic_read_around
- Remove APIC version reads used by old workarounds
- Remove old workaround for Simics
- Fix indentation
Signed-off-by: default avatarAndi Kleen <ak@suse.de>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 5f1d189f
......@@ -53,20 +53,17 @@ static void apic_pm_activate(void);
void enable_NMI_through_LVT0 (void * dummy)
{
unsigned int v, ver;
unsigned int v;
ver = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(ver);
v = APIC_DM_NMI; /* unmask and set to NMI */
apic_write_around(APIC_LVT0, v);
apic_write(APIC_LVT0, v);
}
int get_maxlvt(void)
{
unsigned int v, ver, maxlvt;
unsigned int v, maxlvt;
v = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(v);
maxlvt = GET_APIC_MAXLVT(v);
return maxlvt;
}
......@@ -84,33 +81,33 @@ void clear_local_APIC(void)
*/
if (maxlvt >= 3) {
v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
}
/*
* Careful: we have to set masks only first to deassert
* any level-triggered sources.
*/
v = apic_read(APIC_LVTT);
apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
v = apic_read(APIC_LVT0);
apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
v = apic_read(APIC_LVT1);
apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
if (maxlvt >= 4) {
v = apic_read(APIC_LVTPC);
apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
}
/*
* Clean APIC state for other OSs:
*/
apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
apic_write(APIC_LVTT, APIC_LVT_MASKED);
apic_write(APIC_LVT0, APIC_LVT_MASKED);
apic_write(APIC_LVT1, APIC_LVT_MASKED);
if (maxlvt >= 3)
apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
apic_write(APIC_LVTERR, APIC_LVT_MASKED);
if (maxlvt >= 4)
apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
v = GET_APIC_VERSION(apic_read(APIC_LVR));
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
......@@ -155,7 +152,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
value |= 0xf;
apic_write_around(APIC_SPIV, value);
apic_write(APIC_SPIV, value);
if (!virt_wire_setup) {
/* For LVT0 make it edge triggered, active high, external and enabled */
......@@ -165,11 +162,11 @@ void disconnect_bsp_APIC(int virt_wire_setup)
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
apic_write_around(APIC_LVT0, value);
apic_write(APIC_LVT0, value);
}
else {
/* Disable LVT0 */
apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
/* For LVT1 make it edge triggered, active high, nmi and enabled */
......@@ -180,7 +177,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
apic_write_around(APIC_LVT1, value);
apic_write(APIC_LVT1, value);
}
}
......@@ -196,7 +193,7 @@ void disable_local_APIC(void)
*/
value = apic_read(APIC_SPIV);
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write_around(APIC_SPIV, value);
apic_write(APIC_SPIV, value);
}
/*
......@@ -273,7 +270,7 @@ void __init sync_Arb_IDs(void)
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
| APIC_DM_INIT);
}
......@@ -284,7 +281,7 @@ extern void __error_in_apic_c (void);
*/
void __init init_bsp_APIC(void)
{
unsigned int value, ver;
unsigned int value;
/*
* Don't do the setup now if we have a SMP BIOS as the
......@@ -294,7 +291,6 @@ void __init init_bsp_APIC(void)
return;
value = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(value);
/*
* Do not trust the local APIC being empty at bootup.
......@@ -309,22 +305,21 @@ void __init init_bsp_APIC(void)
value |= APIC_SPIV_APIC_ENABLED;
value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
apic_write_around(APIC_SPIV, value);
apic_write(APIC_SPIV, value);
/*
* Set up the virtual wire mode.
*/
apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
apic_write(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI;
apic_write_around(APIC_LVT1, value);
apic_write(APIC_LVT1, value);
}
void __cpuinit setup_local_APIC (void)
{
unsigned int value, ver, maxlvt;
unsigned int value, maxlvt;
value = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(value);
if ((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f)
__error_in_apic_c();
......@@ -349,7 +344,7 @@ void __cpuinit setup_local_APIC (void)
*/
value = apic_read(APIC_TASKPRI);
value &= ~APIC_TPRI_MASK;
apic_write_around(APIC_TASKPRI, value);
apic_write(APIC_TASKPRI, value);
/*
* Now that we are all set up, enable the APIC
......@@ -391,7 +386,7 @@ void __cpuinit setup_local_APIC (void)
* Set spurious IRQ vector
*/
value |= SPURIOUS_APIC_VECTOR;
apic_write_around(APIC_SPIV, value);
apic_write(APIC_SPIV, value);
/*
* Set up LVT0, LVT1:
......@@ -411,7 +406,7 @@ void __cpuinit setup_local_APIC (void)
value = APIC_DM_EXTINT | APIC_LVT_MASKED;
apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", smp_processor_id());
}
apic_write_around(APIC_LVT0, value);
apic_write(APIC_LVT0, value);
/*
* only the BP should see the LINT1 NMI signal, obviously.
......@@ -420,14 +415,14 @@ void __cpuinit setup_local_APIC (void)
value = APIC_DM_NMI;
else
value = APIC_DM_NMI | APIC_LVT_MASKED;
apic_write_around(APIC_LVT1, value);
apic_write(APIC_LVT1, value);
{
unsigned oldvalue;
maxlvt = get_maxlvt();
oldvalue = apic_read(APIC_ESR);
value = ERROR_APIC_VECTOR; // enables sending errors
apic_write_around(APIC_LVTERR, value);
apic_write(APIC_LVTERR, value);
/*
* spec says clear errors after enabling vector.
*/
......@@ -672,17 +667,17 @@ static void __setup_APIC_LVTT(unsigned int clocks)
if (cpu_isset(cpu, timer_interrupt_broadcast_ipi_mask))
lvtt_value |= APIC_LVT_MASKED;
apic_write_around(APIC_LVTT, lvtt_value);
apic_write(APIC_LVTT, lvtt_value);
/*
* Divide PICLK by 16
*/
tmp_value = apic_read(APIC_TDCR);
apic_write_around(APIC_TDCR, (tmp_value
apic_write(APIC_TDCR, (tmp_value
& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
| APIC_TDR_DIV_16);
apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
apic_write(APIC_TMICT, clocks/APIC_DIVISOR);
}
static void setup_APIC_timer(unsigned int clocks)
......@@ -691,12 +686,6 @@ static void setup_APIC_timer(unsigned int clocks)
local_irq_save(flags);
/* For some reasons this doesn't work on Simics, so fake it for now */
if (!strstr(boot_cpu_data.x86_model_id, "Screwdriver")) {
__setup_APIC_LVTT(clocks);
return;
}
/* wait for irq slice */
if (vxtime.hpet_address) {
int trigger = hpet_readl(HPET_T0_CMP);
......@@ -800,7 +789,7 @@ void disable_APIC_timer(void)
unsigned long v;
v = apic_read(APIC_LVTT);
apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
}
}
......@@ -813,7 +802,7 @@ void enable_APIC_timer(void)
unsigned long v;
v = apic_read(APIC_LVTT);
apic_write_around(APIC_LVTT, v & ~APIC_LVT_MASKED);
apic_write(APIC_LVTT, v & ~APIC_LVT_MASKED);
}
}
......@@ -1066,7 +1055,7 @@ int __init APIC_init_uniprocessor (void)
connect_bsp_APIC();
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
apic_write_around(APIC_ID, SET_APIC_ID(boot_cpu_id));
apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id));
setup_local_APIC();
......
......@@ -910,7 +910,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
disable_8259A_irq(0);
/* mask LVT0 */
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
/*
* We use logical delivery to get the timer IRQ
......@@ -1635,7 +1635,7 @@ static void enable_lapic_irq (unsigned int irq)
unsigned long v;
v = apic_read(APIC_LVT0);
apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
}
static void disable_lapic_irq (unsigned int irq)
......@@ -1643,7 +1643,7 @@ static void disable_lapic_irq (unsigned int irq)
unsigned long v;
v = apic_read(APIC_LVT0);
apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
}
static void ack_lapic_irq (unsigned int irq)
......@@ -1769,7 +1769,7 @@ static inline void check_timer(void)
* the 8259A which implies the virtual wire has to be
* disabled in the local APIC.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
enable_8259A_irq(0);
......@@ -1835,21 +1835,21 @@ static inline void check_timer(void)
disable_8259A_irq(0);
irq_desc[0].handler = &lapic_irq_type;
apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
if (timer_irq_works()) {
apic_printk(APIC_QUIET, " works.\n");
return;
}
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
apic_printk(APIC_VERBOSE," failed.\n");
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
init_8259A(0);
make_8259A_irq(0);
apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
apic_write(APIC_LVT0, APIC_DM_EXTINT);
unlock_ExtINT_logic();
......
......@@ -80,7 +80,7 @@ static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
h = THERMAL_APIC_VECTOR;
h |= (APIC_DM_FIXED | APIC_LVT_MASKED);
apic_write_around(APIC_LVTTHMR, h);
apic_write(APIC_LVTTHMR, h);
rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h);
......@@ -89,7 +89,7 @@ static void __cpuinit intel_init_thermal(struct cpuinfo_x86 *c)
wrmsr(MSR_IA32_MISC_ENABLE, l | (1 << 3), h);
l = apic_read(APIC_LVTTHMR);
apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
cpu, tm2 ? "TM2" : "TM1");
return;
......
......@@ -666,7 +666,6 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta
for (j = 1; j <= num_starts; j++) {
Dprintk("Sending STARTUP #%d.\n",j);
apic_read_around(APIC_SPIV);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
Dprintk("After apic_write.\n");
......@@ -705,7 +704,6 @@ static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int sta
* Due to the Pentium erratum 3AP.
*/
if (maxlvt > 3) {
apic_read_around(APIC_SPIV);
apic_write(APIC_ESR, 0);
}
accept_status = (apic_read(APIC_ESR) & 0xEF);
......@@ -842,11 +840,8 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid)
/*
* Be paranoid about clearing APIC errors.
*/
if (APIC_INTEGRATED(apic_version[apicid])) {
apic_read_around(APIC_SPIV);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
}
/*
* Status is now clean
......@@ -1024,7 +1019,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
/*
* If we couldn't find a local APIC, then get out of here now!
*/
if (APIC_INTEGRATED(apic_version[boot_cpu_id]) && !cpu_has_apic) {
if (!cpu_has_apic) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_id);
printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
......
......@@ -52,10 +52,6 @@ static __inline__ void apic_wait_icr_idle(void)
while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY );
}
#define FORCE_READ_AROUND_WRITE 0
#define apic_read_around(x)
#define apic_write_around(x,y) apic_write((x),(y))
static inline void ack_APIC_irq(void)
{
/*
......@@ -66,7 +62,7 @@ static inline void ack_APIC_irq(void)
*/
/* Docs say use 0 for future compatibility */
apic_write_around(APIC_EOI, 0);
apic_write(APIC_EOI, 0);
}
extern int get_maxlvt (void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment