ixgbe: Add hardware specific initialization code for 82599 devices

This patch adds the hardware initialization code specific to 82599.  This
is similar to the 82598 hardware initialization code.  It also includes all
changes to the existing hardware init code to support 82599.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ixgbe/ixgbe_82598.c

@@ -1046,9 +1046,9 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
  *
  *  Determines physical layer capabilities of the current configuration.
  **/
-static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
 {
-	s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 
 	switch (hw->device_id) {
 	case IXGBE_DEV_ID_82598:
@@ -1111,8 +1111,11 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 	.clear_hw_cntrs		= &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type		= &ixgbe_get_media_type_82598,
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
+	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
 	.get_mac_addr		= &ixgbe_get_mac_addr_generic,
 	.stop_adapter		= &ixgbe_stop_adapter_generic,
+	.get_bus_info           = &ixgbe_get_bus_info_generic,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
 	.read_analog_reg8	= &ixgbe_read_analog_reg8_82598,
 	.write_analog_reg8	= &ixgbe_write_analog_reg8_82598,
 	.setup_link		= &ixgbe_setup_mac_link_82598,

drivers/net/ixgbe/ixgbe_common.h

@@ -37,12 +37,14 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
 s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num);
 s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
 s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
 s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
 
 s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
 
 s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
 s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
 s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
                                        u16 *data);
@@ -61,6 +63,7 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
                                       u32 addr_count, ixgbe_mc_addr_itr func);
 s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
 s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
 s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num);
 s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packtetbuf_num);
 s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
@@ -75,6 +78,13 @@ s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val);
 
 #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
 
+#ifndef writeq
+#define writeq(val, addr) writel((u32) (val), addr); \
+    writel((u32) (val >> 32), (addr + 4));
+#endif
+
+#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg)))
+
 #define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
 
 #define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\

drivers/net/ixgbe/ixgbe_ethtool.c

@@ -469,7 +469,7 @@ static void ixgbe_get_regs(struct net_device *netdev,
 	regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT);
 	regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL);
 	regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM);
-	regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT);
+	regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0));
 
 	regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS);
 	regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS);

drivers/net/ixgbe/ixgbe_phy.h

@@ -54,14 +54,15 @@
 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS  0x3
 
 /* Bit-shift macros */
-#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT    12
-#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT    8
-#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT    4
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT    24
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT    16
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT    8
 
 /* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
 #define IXGBE_SFF_VENDOR_OUI_TYCO     0x00407600
 #define IXGBE_SFF_VENDOR_OUI_FTL      0x00906500
 #define IXGBE_SFF_VENDOR_OUI_AVAGO    0x00176A00
+#define IXGBE_SFF_VENDOR_OUI_INTEL    0x001B2100
 
 /* I2C SDA and SCL timing parameters for standard mode */
 #define IXGBE_I2C_T_HD_STA  4
@@ -101,5 +102,12 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
 s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
                                         u16 *list_offset,
                                         u16 *data_offset);
-
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+                                u8 dev_addr, u8 *data);
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+                                 u8 dev_addr, u8 data);
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+                                  u8 *eeprom_data);
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+                                   u8 eeprom_data);
 #endif /* _IXGBE_PHY_H_ */