Merge tag 'renesas-dt3-for-v3.14' of...

Merge tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Third Round of Renesas ARM Based SoC DT Updates for v3.14

* r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs
  - Add SSI, QSPI and MSIOF  clocks in device tree

r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards
  - Remove reference DTS
  - Specify external clock frequency in DT
  - Sync non-reference DTS with referene DTS
  - Add clocks to DTS

* r8a7740 (R-Mobile A1) based Armadillo board
  - Add gpio-keys device
  - Add PWM backlight enable GPIO
  - Add PWM backlight power supply

* r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and
  r8a73a4 (SH-Mobile APE6) SoCs
  - Specify PFC interrupts in DT

* tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits)
  ARM: shmobile: r8a7791: Add SSI clocks in device tree
  ARM: shmobile: r8a7790: Add SSI clocks in device tree
  ARM: shmobile: r8a7791: Add QSPI module clock in device tree
  ARM: shmobile: r8a7790: Add QSPI module clock in device tree
  ARM: shmobile: r8a7791: Add MSIOF clocks in device tree
  ARM: shmobile: r8a7790: Add MSIOF clocks in device tree
  ARM: shmobile: Remove Koelsch reference DTS
  ARM: shmobile: Remove Lager reference DTS
  ARM: shmobile: koelsch: Specify external clock frequency in DT
  ARM: shmobile: lager: Specify external clock frequency in DT
  ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS
  ARM: shmobile: Sync Lager DTS with Lager reference DTS
  ARM: shmobile: r8a7791: Add clocks
  ARM: shmobile: r8a7790: Reference clocks
  ARM: shmobile: r8a7790: Add clocks
  ARM: shmobile: armadillo: dts: Add gpio-keys device
  ARM: shmobile: sh73a0: Specify PFC interrupts in DT
  ARM: shmobile: r8a7740: Specify PFC interrupts in DT
  ARM: shmobile: r8a73a4: Specify PFC interrupts in DT
  ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt

+* Renesas CPG DIV6 Clock
+
+The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse
+Generator (CPG). They clock input is divided by a configurable factor from 1
+to 64.
+
+Required Properties:
+
+  - compatible: Must be one of the following
+    - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
+    - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks
+    - "renesas,cpg-div6-clock" for generic DIV6 clocks
+  - reg: Base address and length of the memory resource used by the DIV6 clock
+  - clocks: Reference to the parent clock
+  - #clock-cells: Must be 0
+  - clock-output-names: The name of the clock as a free-form string
+
+
+Example
+-------
+
+	sd2_clk: sd2_clk@e6150078 {
+		compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+		reg = <0 0xe6150078 0 4>;
+		clocks = <&pll1_div2_clk>;
+		#clock-cells = <0>;
+		clock-output-names = "sd2";
+	};

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

+* Renesas CPG Module Stop (MSTP) Clocks
+
+The CPG can gate SoC device clocks. The gates are organized in groups of up to
+32 gates.
+
+This device tree binding describes a single 32 gate clocks group per node.
+Clocks are referenced by user nodes by the MSTP node phandle and the clock
+index in the group, from 0 to 31.
+
+Required Properties:
+
+  - compatible: Must be one of the following
+    - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
+    - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+    - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
+  - reg: Base address and length of the I/O mapped registers used by the MSTP
+    clocks. The first register is the clock control register and is mandatory.
+    The second register is the clock status register and is optional when not
+    implemented in hardware.
+  - clocks: Reference to the parent clocks, one per output clock. The parents
+    must appear in the same order as the output clocks.
+  - #clock-cells: Must be 1
+  - clock-output-names: The name of the clocks as free-form strings
+  - renesas,indices: Indices of the gate clocks into the group (0 to 31)
+
+The clocks, clock-output-names and renesas,indices properties contain one
+entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
+gate clocks must not be declared.
+
+
+Example
+-------
+
+	#include <dt-bindings/clock/r8a7790-clock.h>
+
+	mstp3_clks: mstp3_clks@e615013c {
+		compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+		reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+		clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>,
+			 <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>,
+			 <&mmc0_clk>;
+		#clock-cells = <1>;
+		clock-output-names =
+			"tpu0", "mmcif1", "sdhi3", "sdhi2",
+			 "sdhi1", "sdhi0", "mmcif0";
+		renesas,clock-indices = <
+			R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+			R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0
+			R8A7790_CLK_MMCIF0
+		>;
+	};

Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt

+* Renesas R-Car Gen2 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be one of
+    - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
+    - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+    - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clock
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are "main",
+    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
+
+
+Example
+-------
+
+	cpg_clocks: cpg_clocks@e6150000 {
+		compatible = "renesas,r8a7790-cpg-clocks",
+			     "renesas,rcar-gen2-cpg-clocks";
+		reg = <0 0xe6150000 0 0x1000>;
+		clocks = <&extal_clk>;
+		#clock-cells = <1>;
+		clock-output-names = "main", "pll0, "pll1", "pll3",
+				     "lb", "qspi", "sdh", "sd0", "sd1", "z";
+	};

Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt

+* Freescale IMX25 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+CONFIG bits definition:
+PAD_CTL_HYS			(1 << 8)
+PAD_CTL_PKE			(1 << 7)
+PAD_CTL_PUE			(1 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_ODE_CMOS		(0 << 3)
+PAD_CTL_ODE_OPENDRAIN		(1 << 3)
+PAD_CTL_DSE_NOMINAL		(0 << 1)
+PAD_CTL_DSE_HIGH		(1 << 1)
+PAD_CTL_DSE_MAX			(2 << 1)
+PAD_CTL_SRE_FAST		(1 << 0)
+PAD_CTL_SRE_SLOW		(0 << 0)
+
+Refer to imx25-pinfunc.h in device tree source folder for all available
+imx25 PIN_FUNC_ID.

Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt

@@ -52,12 +52,25 @@ Required properties for pin configuration node:
   CONFIG can be 0 or 1, meaning Pullup disable/enable.
 
 
+The iomux controller has gpio child nodes which are embedded in the iomux
+control registers. They have to be defined as child nodes of the iomux device
+node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges"
+properties for the iomux device node are required.
 
 Example:
 
 iomuxc: iomuxc@10015000 {
 	compatible = "fsl,imx27-iomuxc";
 	reg = <0x10015000 0x600>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	gpio1: gpio@10015000 {
+		...
+	};
+
+	...
 
 	uart {
 		pinctrl_uart1: uart-1 {
@@ -83,6 +96,15 @@ The above example using macros:
 iomuxc: iomuxc@10015000 {
 	compatible = "fsl,imx27-iomuxc";
 	reg = <0x10015000 0x600>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	gpio1: gpio@10015000 {
+		...
+	};
+
+	...
 
 	uart {
 		pinctrl_uart1: uart-1 {

Documentation/devicetree/bindings/pinctrl/qcom,msm8x74-pinctrl.txt

+Qualcomm MSM8x74 TLMM block
+
+Required properties:
+- compatible: "qcom,msm8x74-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+                The first cell is the gpio pin number and the
+                second cell is used for optional parameters.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an abitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+ pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
+
+Non-empty subnodes must specify the 'pins' property.
+Note that not all properties are valid for all pins.
+
+
+Valid values for qcom,pins are:
+  gpio0-gpio145
+    Supports mux, bias and drive-strength
+
+  sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data
+    Supports bias and drive-strength
+
+Valid values for qcom,function are:
+  blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus
+
+  (Note that this is not yet the complete list of functions)
+
+
+
+Example:
+
+	msmgpio: pinctrl@fd510000 {
+		compatible = "qcom,msm8x74-pinctrl";
+		reg = <0xfd510000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 208 0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_default>;
+
+		uart2_default: uart2_default {
+			mux {
+				qcom,pins = "gpio4", "gpio5";
+				qcom,function = "blsp_uart2";
+			};
+
+			tx {
+				qcom,pins = "gpio4";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				qcom,pins = "gpio5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};

Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt

@@ -26,6 +26,11 @@ Optional properties:
   - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden
     otherwise. Should be 3.
 
+  - interrupts-extended: Specify the interrupts associated with external
+    IRQ pins. This property is mandatory when the PFC handles GPIOs and
+    forbidden otherwise. When specified, it must contain one interrupt per
+    external IRQ, sorted by external IRQ number.
+
 The PFC node also acts as a container for pin configuration nodes. Please refer
 to pinctrl-bindings.txt in this directory for the definition of the term "pin
 configuration node" and for the common pinctrl bindings used by client devices.
@@ -103,6 +108,15 @@ Example 1: SH73A0 (SH-Mobile AG5) pin controller node
 		      <0xe605801c 0x1c>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupts-extended =
+			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
 	};
 
 Example 2: A GPIO LED node that references a GPIO

arch/arm/boot/dts/Makefile

@@ -232,7 +232,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
 	r8a7779-marzen.dtb \
 	r8a7779-marzen-reference.dtb \
 	r8a7791-koelsch.dtb \
-	r8a7791-koelsch-reference.dtb \
 	r8a7790-lager.dtb \
 	r8a7790-lager-reference.dtb \
 	sh73a0-kzm9g.dtb \

arch/arm/boot/dts/r8a73a4.dtsi

@@ -288,6 +288,22 @@ pfc: pfc@e6050000 {
 		reg = <0 0xe6050000 0 0x9000>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupts-extended =
+			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
+			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
+			<&irqc0  8 0>, <&irqc0  9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+			<&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+			<&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+			<&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+			<&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+			<&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+			<&irqc1  0 0>, <&irqc1  1 0>, <&irqc1  2 0>, <&irqc1  3 0>,
+			<&irqc1  4 0>, <&irqc1  5 0>, <&irqc1  6 0>, <&irqc1  7 0>,
+			<&irqc1  8 0>, <&irqc1  9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+			<&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+			<&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+			<&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+			<&irqc1 24 0>, <&irqc1 25 0>;
 	};
 
 	sdhi0: sd@ee100000 {

arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts

@@ -63,6 +63,44 @@ vccq_sdhi0: regulator@2 {
 		enable-active-high;
 	};
 
+	reg_5p0v: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5.0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "SW3";
+			gpio-key,wakeup;
+		};
+
+		back-key {
+			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+			linux,code = <158>;
+			label = "SW4";
+		};
+
+		menu-key {
+			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+			linux,code = <139>;
+			label = "SW5";
+		};
+
+		home-key {
+			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+			linux,code = <102>;
+			label = "SW6";
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led1 {
@@ -86,6 +124,8 @@ backlight {
 		default-brightness-level = <9>;
 		pinctrl-0 = <&backlight_pins>;
 		pinctrl-names = "default";
+		power-supply = <&reg_5p0v>;
+		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
 	};
 
 	sound {

arch/arm/boot/dts/r8a7740.dtsi

@@ -155,6 +155,15 @@ pfc: pfc@e6050000 {
 		      <0xe605800c 0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupts-extended =
+			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
 	};
 
 	tpu: pwm@e6600000 {

arch/arm/boot/dts/r8a7790-lager-reference.dts

-/*
- * Device Tree Source for the Lager board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7790.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Lager";
-	compatible = "renesas,lager-reference", "renesas,r8a7790";
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
-	};
-
-	memory@180000000 {
-		device_type = "memory";
-		reg = <1 0x80000000 0 0x80000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data";
-		renesas,function = "scif1";
-	};
-
-	mmc1_pins: mmc1 {
-		renesas,groups = "mmc1_data8", "mmc1_ctrl";
-		renesas,function = "mmc1";
-	};
-};
-
-&mmcif1 {
-	pinctrl-0 = <&mmc1_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};

arch/arm/boot/dts/r8a7790-lager.dts

@@ -10,6 +10,7 @@
 
 /dts-v1/;
 #include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Lager";
@@ -33,4 +34,60 @@ lbsc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fixedregulator3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif0_pins &scif1_pins>;
+	pinctrl-names = "default";
+
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data";
+		renesas,function = "scif0";
+	};
+
+	scif1_pins: serial1 {
+		renesas,groups = "scif1_data";
+		renesas,function = "scif1";
+	};
+
+	mmc1_pins: mmc1 {
+		renesas,groups = "mmc1_data8", "mmc1_ctrl";
+		renesas,function = "mmc1";
+	};
+};
+
+&mmcif1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
 };

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Koelsch";
@@ -29,4 +30,36 @@ lbsc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif0_pins &scif1_pins>;
+	pinctrl-names = "default";
+
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	scif1_pins: serial1 {
+		renesas,groups = "scif1_data_d";
+		renesas,function = "scif1";
+	};
 };

arch/arm/boot/dts/sh73a0.dtsi

@@ -242,6 +242,15 @@ pfc: pfc@e6050000 {
 		      <0xe605801c 0x1c>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupts-extended =
+			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
 	};
 
 	sh_fsi2: sound@ec230000 {

arch/arm/mach-shmobile/Kconfig

@@ -12,6 +12,7 @@ config ARCH_SHMOBILE_MULTI
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
+	select MIGHT_HAVE_PCI
 	select NO_IOPORT
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
@@ -96,6 +97,7 @@ config ARCH_R8A7790
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
@@ -104,6 +106,7 @@ config ARCH_R8A7791
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
@@ -112,6 +115,7 @@ config ARCH_EMEV2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select USE_OF
 	select AUTO_ZRELADDR
 
@@ -239,6 +243,7 @@ config MACH_KOELSCH
 	bool "Koelsch board"
 	depends on ARCH_R8A7791
 	select USE_OF
+	select MICREL_PHY if SH_ETH
 
 config MACH_KZM9G
 	bool "KZM-A9-GT board"

arch/arm/mach-shmobile/board-bockw.c

@@ -25,6 +25,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>

arch/arm/mach-shmobile/clock-r7s72100.c

@@ -181,7 +181,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
-	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
 };
 
 void __init r7s72100_clock_init(void)

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -292,9 +292,13 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
 	CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP931]),
 	CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP930]),
 	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP929]),
 	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP928]),
 	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),

arch/arm/mach-shmobile/clock-r8a7791.c

@@ -122,6 +122,7 @@ static struct clk *main_clks[] = {
 
 /* MSTP */
 enum {
+	MSTP813,
 	MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
 	MSTP719, MSTP718, MSTP715, MSTP714,
 	MSTP522,
@@ -132,6 +133,7 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
 	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
 	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
 	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
@@ -192,6 +194,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
 };
 
 #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -652,6 +652,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
+	CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
 	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -20,13 +20,30 @@
 #define __ASM_R8A7778_H__
 
 #include <linux/sh_eth.h>
-#include <linux/platform_data/camera-rcar.h>
 
 /* HPB-DMA slave IDs */
 enum {
 	HPBDMA_SLAVE_DUMMY,
 	HPBDMA_SLAVE_SDHI0_TX,
 	HPBDMA_SLAVE_SDHI0_RX,
+	HPBDMA_SLAVE_SSI0_TX,
+	HPBDMA_SLAVE_SSI0_RX,
+	HPBDMA_SLAVE_SSI1_TX,
+	HPBDMA_SLAVE_SSI1_RX,
+	HPBDMA_SLAVE_SSI2_TX,
+	HPBDMA_SLAVE_SSI2_RX,
+	HPBDMA_SLAVE_SSI3_TX,
+	HPBDMA_SLAVE_SSI3_RX,
+	HPBDMA_SLAVE_SSI4_TX,
+	HPBDMA_SLAVE_SSI4_RX,
+	HPBDMA_SLAVE_SSI5_TX,
+	HPBDMA_SLAVE_SSI5_RX,
+	HPBDMA_SLAVE_SSI6_TX,
+	HPBDMA_SLAVE_SSI6_RX,
+	HPBDMA_SLAVE_SSI7_TX,
+	HPBDMA_SLAVE_SSI7_RX,
+	HPBDMA_SLAVE_SSI8_TX,
+	HPBDMA_SLAVE_SSI8_RX,
 	HPBDMA_SLAVE_HPBIF0_TX,
 	HPBDMA_SLAVE_HPBIF0_RX,
 	HPBDMA_SLAVE_HPBIF1_TX,
@@ -45,6 +62,8 @@ enum {
 	HPBDMA_SLAVE_HPBIF7_RX,
 	HPBDMA_SLAVE_HPBIF8_TX,
 	HPBDMA_SLAVE_HPBIF8_RX,
+	HPBDMA_SLAVE_USBFUNC_TX,
+	HPBDMA_SLAVE_USBFUNC_RX,
 };
 
 extern void r8a7778_add_standard_devices(void);

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -319,6 +319,29 @@ void __init r8a7778_add_dt_devices(void)
 #define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
 #define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
 
+#define HPBDMA_SSI(_id)				\
+{						\
+	.id	= HPBDMA_SLAVE_SSI## _id ##_TX,	\
+	.addr	= 0xffd91008 + (_id * 0x40),	\
+	.dcr	= HPB_DMAE_DCR_CT |		\
+		  HPB_DMAE_DCR_DIP |		\
+		  HPB_DMAE_DCR_SPDS_32BIT |	\
+		  HPB_DMAE_DCR_DMDL |		\
+		  HPB_DMAE_DCR_DPDS_32BIT,	\
+	.port   = _id + (_id << 8),		\
+	.dma_ch = (28 + _id),			\
+}, {						\
+	.id	= HPBDMA_SLAVE_SSI## _id ##_RX,	\
+	.addr	= 0xffd9100c + (_id * 0x40),	\
+	.dcr	= HPB_DMAE_DCR_CT |		\
+		  HPB_DMAE_DCR_DIP |		\
+		  HPB_DMAE_DCR_SMDL |		\
+		  HPB_DMAE_DCR_SPDS_32BIT |	\
+		  HPB_DMAE_DCR_DPDS_32BIT,	\
+	.port   = _id + (_id << 8),		\
+	.dma_ch = (28 + _id),			\
+}
+
 #define HPBDMA_HPBIF(_id)				\
 {							\
 	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
@@ -371,8 +394,34 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 		.port	= 0x0D0C,
 		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
 		.dma_ch	= 22,
+	}, {
+		.id	= HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
+		.addr	= 0xffe60018,
+		.dcr	= HPB_DMAE_DCR_SPDS_32BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_32BIT,
+		.port	= 0x0000,
+		.dma_ch	= 14,
+	}, {
+		.id	= HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
+		.addr	= 0xffe6001c,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_32BIT |
+			  HPB_DMAE_DCR_DPDS_32BIT,
+		.port	= 0x0101,
+		.dma_ch	= 15,
 	},
 
+	HPBDMA_SSI(0),
+	HPBDMA_SSI(1),
+	HPBDMA_SSI(2),
+	HPBDMA_SSI(3),
+	HPBDMA_SSI(4),
+	HPBDMA_SSI(5),
+	HPBDMA_SSI(6),
+	HPBDMA_SSI(7),
+	HPBDMA_SSI(8),
+
 	HPBDMA_HPBIF(0),
 	HPBDMA_HPBIF(1),
 	HPBDMA_HPBIF(2),
@@ -385,24 +434,44 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 };
 
 static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
+	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX),   /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX),   /* ch. 28 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX),   /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX),   /* ch. 29 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX),   /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX),   /* ch. 30 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX),   /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX),   /* ch. 31 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX),   /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX),   /* ch. 32 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX),   /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX),   /* ch. 33 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX),   /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX),   /* ch. 34 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX),   /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX),   /* ch. 35 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX),   /* ch. 36 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX),   /* ch. 36 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
 };

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -67,6 +67,27 @@ R8A7790_GPIO(5);
 		&r8a7790_gpio##idx##_platform_data,			\
 		sizeof(r8a7790_gpio##idx##_platform_data))
 
+static struct resource i2c_resources[] __initdata = {
+	/* I2C0 */
+	DEFINE_RES_MEM(0xE6508000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(287)),
+	/* I2C1 */
+	DEFINE_RES_MEM(0xE6518000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(288)),
+	/* I2C2 */
+	DEFINE_RES_MEM(0xE6530000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(286)),
+	/* I2C3 */
+	DEFINE_RES_MEM(0xE6540000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(290)),
+
+};
+
+#define r8a7790_register_i2c(idx)		\
+	platform_device_register_simple(	\
+		"i2c-rcar", idx,		\
+		i2c_resources + (2 * idx), 2);	\
+
 void __init r8a7790_pinmux_init(void)
 {
 	r8a7790_register_pfc();
@@ -76,6 +97,10 @@ void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
+	r8a7790_register_i2c(0);
+	r8a7790_register_i2c(1);
+	r8a7790_register_i2c(2);
+	r8a7790_register_i2c(3);
 }
 
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/clk/shmobile.h>
 #include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -44,8 +45,10 @@ u32 __init rcar_gen2_read_mode_pins(void)
 
 void __init rcar_gen2_timer_init(void)
 {
-#ifdef CONFIG_ARM_ARCH_TIMER
+#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
 	u32 mode = rcar_gen2_read_mode_pins();
+#endif
+#ifdef CONFIG_ARM_ARCH_TIMER
 	void __iomem *base;
 	int extal_mhz = 0;
 	u32 freq;
@@ -78,14 +81,28 @@ void __init rcar_gen2_timer_init(void)
 	/* Remap "armgcnt address map" space */
 	base = ioremap(0xe6080000, PAGE_SIZE);
 
-	/* Update registers with correct frequency */
-	iowrite32(freq, base + CNTFID0);
-	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+	/*
+	 * Update the timer if it is either not running, or is not at the
+	 * right frequency. The timer is only configurable in secure mode
+	 * so this avoids an abort if the loader started the timer and
+	 * entered the kernel in non-secure mode.
+	 */
+
+	if ((ioread32(base + CNTCR) & 1) == 0 ||
+	    ioread32(base + CNTFID0) != freq) {
+		/* Update registers with correct frequency */
+		iowrite32(freq, base + CNTFID0);
+		asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+		/* make sure arch timer is started by setting bit 0 of CNTCR */
+		iowrite32(1, base + CNTCR);
+	}
 
-	/* make sure arch timer is started by setting bit 0 of CNTCR */
-	iowrite32(1, base + CNTCR);
 	iounmap(base);
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
+#ifdef CONFIG_COMMON_CLK
+	rcar_gen2_clocks_init(mode);
+#endif
 	clocksource_of_init();
 }

drivers/clk/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_PLAT_SAMSUNG)	+= samsung/
 obj-$(CONFIG_COMMON_CLK_XGENE)  += clk-xgene.o
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
 obj-$(CONFIG_COMMON_CLK_AT91)	+= at91/
+obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= shmobile/
 
 obj-$(CONFIG_X86)		+= x86/
 

drivers/clk/shmobile/Makefile

+obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
+obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-mstp.o
+
+# for emply built-in.o
+obj-n	:= dummy

drivers/clk/shmobile/clk-div6.c

+/*
+ * r8a7790 Common Clock Framework support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define CPG_DIV6_CKSTP		BIT(8)
+#define CPG_DIV6_DIV(d)		((d) & 0x3f)
+#define CPG_DIV6_DIV_MASK	0x3f
+
+/**
+ * struct div6_clock - MSTP gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @reg: IO-remapped register
+ * @div: divisor value (1-64)
+ */
+struct div6_clock {
+	struct clk_hw hw;
+	void __iomem *reg;
+	unsigned int div;
+};
+
+#define to_div6_clock(_hw) container_of(_hw, struct div6_clock, hw)
+
+static int cpg_div6_clock_enable(struct clk_hw *hw)
+{
+	struct div6_clock *clock = to_div6_clock(hw);
+
+	clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg);
+
+	return 0;
+}
+
+static void cpg_div6_clock_disable(struct clk_hw *hw)
+{
+	struct div6_clock *clock = to_div6_clock(hw);
+
+	/* DIV6 clocks require the divisor field to be non-zero when stopping
+	 * the clock.
+	 */
+	clk_writel(CPG_DIV6_CKSTP | CPG_DIV6_DIV(CPG_DIV6_DIV_MASK),
+		   clock->reg);
+}
+
+static int cpg_div6_clock_is_enabled(struct clk_hw *hw)
+{
+	struct div6_clock *clock = to_div6_clock(hw);
+
+	return !(clk_readl(clock->reg) & CPG_DIV6_CKSTP);
+}
+
+static unsigned long cpg_div6_clock_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct div6_clock *clock = to_div6_clock(hw);
+	unsigned int div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
+
+	return parent_rate / div;
+}
+
+static unsigned int cpg_div6_clock_calc_div(unsigned long rate,
+					    unsigned long parent_rate)
+{
+	unsigned int div;
+
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+	return clamp_t(unsigned int, div, 1, 64);
+}
+
+static long cpg_div6_clock_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *parent_rate)
+{
+	unsigned int div = cpg_div6_clock_calc_div(rate, *parent_rate);
+
+	return *parent_rate / div;
+}
+
+static int cpg_div6_clock_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct div6_clock *clock = to_div6_clock(hw);
+	unsigned int div = cpg_div6_clock_calc_div(rate, parent_rate);
+
+	clock->div = div;
+
+	/* Only program the new divisor if the clock isn't stopped. */
+	if (!(clk_readl(clock->reg) & CPG_DIV6_CKSTP))
+		clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg);
+
+	return 0;
+}
+
+static const struct clk_ops cpg_div6_clock_ops = {
+	.enable = cpg_div6_clock_enable,
+	.disable = cpg_div6_clock_disable,
+	.is_enabled = cpg_div6_clock_is_enabled,
+	.recalc_rate = cpg_div6_clock_recalc_rate,
+	.round_rate = cpg_div6_clock_round_rate,
+	.set_rate = cpg_div6_clock_set_rate,
+};
+
+static void __init cpg_div6_clock_init(struct device_node *np)
+{
+	struct clk_init_data init;
+	struct div6_clock *clock;
+	const char *parent_name;
+	const char *name;
+	struct clk *clk;
+	int ret;
+
+	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+	if (!clock) {
+		pr_err("%s: failed to allocate %s DIV6 clock\n",
+		       __func__, np->name);
+		return;
+	}
+
+	/* Remap the clock register and read the divisor. Disabling the
+	 * clock overwrites the divisor, so we need to cache its value for the
+	 * enable operation.
+	 */
+	clock->reg = of_iomap(np, 0);
+	if (clock->reg == NULL) {
+		pr_err("%s: failed to map %s DIV6 clock register\n",
+		       __func__, np->name);
+		goto error;
+	}
+
+	clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1;
+
+	/* Parse the DT properties. */
+	ret = of_property_read_string(np, "clock-output-names", &name);
+	if (ret < 0) {
+		pr_err("%s: failed to get %s DIV6 clock output name\n",
+		       __func__, np->name);
+		goto error;
+	}
+
+	parent_name = of_clk_get_parent_name(np, 0);
+	if (parent_name == NULL) {
+		pr_err("%s: failed to get %s DIV6 clock parent name\n",
+		       __func__, np->name);
+		goto error;
+	}
+
+	/* Register the clock. */
+	init.name = name;
+	init.ops = &cpg_div6_clock_ops;
+	init.flags = CLK_IS_BASIC;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clock->hw.init = &init;
+
+	clk = clk_register(NULL, &clock->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: failed to register %s DIV6 clock (%ld)\n",
+		       __func__, np->name, PTR_ERR(clk));
+		goto error;
+	}
+
+	of_clk_add_provider(np, of_clk_src_simple_get, clk);
+
+	return;
+
+error:
+	if (clock->reg)
+		iounmap(clock->reg);
+	kfree(clock);
+}
+CLK_OF_DECLARE(cpg_div6_clk, "renesas,cpg-div6-clock", cpg_div6_clock_init);

drivers/clk/shmobile/clk-mstp.c

+/*
+ * R-Car MSTP clocks
+ *
+ * Copyright (C) 2013 Ideas On Board SPRL
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+/*
+ * MSTP clocks. We can't use standard gate clocks as we need to poll on the
+ * status register when enabling the clock.
+ */
+
+#define MSTP_MAX_CLOCKS		32
+
+/**
+ * struct mstp_clock_group - MSTP gating clocks group
+ *
+ * @data: clocks in this group
+ * @smstpcr: module stop control register
+ * @mstpsr: module stop status register (optional)
+ * @lock: protects writes to SMSTPCR
+ */
+struct mstp_clock_group {
+	struct clk_onecell_data data;
+	void __iomem *smstpcr;
+	void __iomem *mstpsr;
+	spinlock_t lock;
+};
+
+/**
+ * struct mstp_clock - MSTP gating clock
+ * @hw: handle between common and hardware-specific interfaces
+ * @bit_index: control bit index
+ * @group: MSTP clocks group
+ */
+struct mstp_clock {
+	struct clk_hw hw;
+	u32 bit_index;
+	struct mstp_clock_group *group;
+};
+
+#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw)
+
+static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct mstp_clock_group *group = clock->group;
+	u32 bitmask = BIT(clock->bit_index);
+	unsigned long flags;
+	unsigned int i;
+	u32 value;
+
+	spin_lock_irqsave(&group->lock, flags);
+
+	value = clk_readl(group->smstpcr);
+	if (enable)
+		value &= ~bitmask;
+	else
+		value |= bitmask;
+	clk_writel(value, group->smstpcr);
+
+	spin_unlock_irqrestore(&group->lock, flags);
+
+	if (!enable || !group->mstpsr)
+		return 0;
+
+	for (i = 1000; i > 0; --i) {
+		if (!(clk_readl(group->mstpsr) & bitmask))
+			break;
+		cpu_relax();
+	}
+
+	if (!i) {
+		pr_err("%s: failed to enable %p[%d]\n", __func__,
+		       group->smstpcr, clock->bit_index);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int cpg_mstp_clock_enable(struct clk_hw *hw)
+{
+	return cpg_mstp_clock_endisable(hw, true);
+}
+
+static void cpg_mstp_clock_disable(struct clk_hw *hw)
+{
+	cpg_mstp_clock_endisable(hw, false);
+}
+
+static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
+{
+	struct mstp_clock *clock = to_mstp_clock(hw);
+	struct mstp_clock_group *group = clock->group;
+	u32 value;
+
+	if (group->mstpsr)
+		value = clk_readl(group->mstpsr);
+	else
+		value = clk_readl(group->smstpcr);
+
+	return !!(value & BIT(clock->bit_index));
+}
+
+static const struct clk_ops cpg_mstp_clock_ops = {
+	.enable = cpg_mstp_clock_enable,
+	.disable = cpg_mstp_clock_disable,
+	.is_enabled = cpg_mstp_clock_is_enabled,
+};
+
+static struct clk * __init
+cpg_mstp_clock_register(const char *name, const char *parent_name,
+			unsigned int index, struct mstp_clock_group *group)
+{
+	struct clk_init_data init;
+	struct mstp_clock *clock;
+	struct clk *clk;
+
+	clock = kzalloc(sizeof(*clock), GFP_KERNEL);
+	if (!clock) {
+		pr_err("%s: failed to allocate MSTP clock.\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &cpg_mstp_clock_ops;
+	init.flags = CLK_IS_BASIC;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	clock->bit_index = index;
+	clock->group = group;
+	clock->hw.init = &init;
+
+	clk = clk_register(NULL, &clock->hw);
+
+	if (IS_ERR(clk))
+		kfree(clock);
+
+	return clk;
+}
+
+static void __init cpg_mstp_clocks_init(struct device_node *np)
+{
+	struct mstp_clock_group *group;
+	struct clk **clks;
+	unsigned int i;
+
+	group = kzalloc(sizeof(*group), GFP_KERNEL);
+	clks = kzalloc(MSTP_MAX_CLOCKS * sizeof(*clks), GFP_KERNEL);
+	if (group == NULL || clks == NULL) {
+		kfree(group);
+		kfree(clks);
+		pr_err("%s: failed to allocate group\n", __func__);
+		return;
+	}
+
+	spin_lock_init(&group->lock);
+	group->data.clks = clks;
+
+	group->smstpcr = of_iomap(np, 0);
+	group->mstpsr = of_iomap(np, 1);
+
+	if (group->smstpcr == NULL) {
+		pr_err("%s: failed to remap SMSTPCR\n", __func__);
+		kfree(group);
+		kfree(clks);
+		return;
+	}
+
+	for (i = 0; i < MSTP_MAX_CLOCKS; ++i) {
+		const char *parent_name;
+		const char *name;
+		u32 clkidx;
+		int ret;
+
+		/* Skip clocks with no name. */
+		ret = of_property_read_string_index(np, "clock-output-names",
+						    i, &name);
+		if (ret < 0 || strlen(name) == 0)
+			continue;
+
+		parent_name = of_clk_get_parent_name(np, i);
+		ret = of_property_read_u32_index(np, "renesas,clock-indices", i,
+						 &clkidx);
+		if (parent_name == NULL || ret < 0)
+			break;
+
+		if (clkidx >= MSTP_MAX_CLOCKS) {
+			pr_err("%s: invalid clock %s %s index %u)\n",
+			       __func__, np->name, name, clkidx);
+			continue;
+		}
+
+		clks[clkidx] = cpg_mstp_clock_register(name, parent_name, i,
+						       group);
+		if (!IS_ERR(clks[clkidx])) {
+			group->data.clk_num = max(group->data.clk_num, clkidx);
+			/*
+			 * Register a clkdev to let board code retrieve the
+			 * clock by name and register aliases for non-DT
+			 * devices.
+			 *
+			 * FIXME: Remove this when all devices that require a
+			 * clock will be instantiated from DT.
+			 */
+			clk_register_clkdev(clks[clkidx], name, NULL);
+		} else {
+			pr_err("%s: failed to register %s %s clock (%ld)\n",
+			       __func__, np->name, name, PTR_ERR(clks[clkidx]));
+		}
+	}
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &group->data);
+}
+CLK_OF_DECLARE(cpg_mstp_clks, "renesas,cpg-mstp-clocks", cpg_mstp_clocks_init);

drivers/clk/shmobile/clk-rcar-gen2.c

+/*
+ * rcar_gen2 Core CPG Clocks
+ *
+ * Copyright (C) 2013  Ideas On Board SPRL
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+struct rcar_gen2_cpg {
+	struct clk_onecell_data data;
+	spinlock_t lock;
+	void __iomem *reg;
+};
+
+#define CPG_SDCKCR			0x00000074
+#define CPG_PLL0CR			0x000000d8
+#define CPG_FRQCRC			0x000000e0
+#define CPG_FRQCRC_ZFC_MASK		(0x1f << 8)
+#define CPG_FRQCRC_ZFC_SHIFT		8
+
+/* -----------------------------------------------------------------------------
+ * Z Clock
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.  clk->rate = parent->rate * mult / 32
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+struct cpg_z_clk {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+#define to_z_clk(_hw)	container_of(_hw, struct cpg_z_clk, hw)
+
+static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct cpg_z_clk *zclk = to_z_clk(hw);
+	unsigned int mult;
+	unsigned int val;
+
+	val = (clk_readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK)
+	    >> CPG_FRQCRC_ZFC_SHIFT;
+	mult = 32 - val;
+
+	return div_u64((u64)parent_rate * mult, 32);
+}
+
+static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *parent_rate)
+{
+	unsigned long prate  = *parent_rate;
+	unsigned int mult;
+
+	if (!prate)
+		prate = 1;
+
+	mult = div_u64((u64)rate * 32, prate);
+	mult = clamp(mult, 1U, 32U);
+
+	return *parent_rate / 32 * mult;
+}
+
+static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long parent_rate)
+{
+	struct cpg_z_clk *zclk = to_z_clk(hw);
+	unsigned int mult;
+	u32 val;
+
+	mult = div_u64((u64)rate * 32, parent_rate);
+	mult = clamp(mult, 1U, 32U);
+
+	val = clk_readl(zclk->reg);
+	val &= ~CPG_FRQCRC_ZFC_MASK;
+	val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT;
+	clk_writel(val, zclk->reg);
+
+	return 0;
+}
+
+static const struct clk_ops cpg_z_clk_ops = {
+	.recalc_rate = cpg_z_clk_recalc_rate,
+	.round_rate = cpg_z_clk_round_rate,
+	.set_rate = cpg_z_clk_set_rate,
+};
+
+static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg)
+{
+	static const char *parent_name = "pll0";
+	struct clk_init_data init;
+	struct cpg_z_clk *zclk;
+	struct clk *clk;
+
+	zclk = kzalloc(sizeof(*zclk), GFP_KERNEL);
+	if (!zclk)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = "z";
+	init.ops = &cpg_z_clk_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	zclk->reg = cpg->reg + CPG_FRQCRC;
+	zclk->hw.init = &init;
+
+	clk = clk_register(NULL, &zclk->hw);
+	if (IS_ERR(clk))
+		kfree(zclk);
+
+	return clk;
+}
+
+/* -----------------------------------------------------------------------------
+ * CPG Clock Data
+ */
+
+/*
+ *   MD		EXTAL		PLL0	PLL1	PLL3
+ * 14 13 19	(MHz)		*1	*1
+ *---------------------------------------------------
+ * 0  0  0	15 x 1		x172/2	x208/2	x106
+ * 0  0  1	15 x 1		x172/2	x208/2	x88
+ * 0  1  0	20 x 1		x130/2	x156/2	x80
+ * 0  1  1	20 x 1		x130/2	x156/2	x66
+ * 1  0  0	26 / 2		x200/2	x240/2	x122
+ * 1  0  1	26 / 2		x200/2	x240/2	x102
+ * 1  1  0	30 / 2		x172/2	x208/2	x106
+ * 1  1  1	30 / 2		x172/2	x208/2	x88
+ *
+ * *1 :	Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md)	((((md) & BIT(14)) >> 12) | \
+					 (((md) & BIT(13)) >> 12) | \
+					 (((md) & BIT(19)) >> 19))
+struct cpg_pll_config {
+	unsigned int extal_div;
+	unsigned int pll1_mult;
+	unsigned int pll3_mult;
+};
+
+static const struct cpg_pll_config cpg_pll_configs[8] __initconst = {
+	{ 1, 208, 106 }, { 1, 208,  88 }, { 1, 156,  80 }, { 1, 156,  66 },
+	{ 2, 240, 122 }, { 2, 240, 102 }, { 2, 208, 106 }, { 2, 208,  88 },
+};
+
+/* SDHI divisors */
+static const struct clk_div_table cpg_sdh_div_table[] = {
+	{  0,  2 }, {  1,  3 }, {  2,  4 }, {  3,  6 },
+	{  4,  8 }, {  5, 12 }, {  6, 16 }, {  7, 18 },
+	{  8, 24 }, { 10, 36 }, { 11, 48 }, {  0,  0 },
+};
+
+static const struct clk_div_table cpg_sd01_div_table[] = {
+	{  5, 12 }, {  6, 16 }, {  7, 18 }, {  8, 24 },
+	{ 10, 36 }, { 11, 48 }, { 12, 10 }, {  0,  0 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static u32 cpg_mode __initdata;
+
+static struct clk * __init
+rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg,
+			     const struct cpg_pll_config *config,
+			     const char *name)
+{
+	const struct clk_div_table *table = NULL;
+	const char *parent_name = "main";
+	unsigned int shift;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+
+	if (!strcmp(name, "main")) {
+		parent_name = of_clk_get_parent_name(np, 0);
+		div = config->extal_div;
+	} else if (!strcmp(name, "pll0")) {
+		/* PLL0 is a configurable multiplier clock. Register it as a
+		 * fixed factor clock for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		u32 value = clk_readl(cpg->reg + CPG_PLL0CR);
+		mult = ((value >> 24) & ((1 << 7) - 1)) + 1;
+	} else if (!strcmp(name, "pll1")) {
+		mult = config->pll1_mult / 2;
+	} else if (!strcmp(name, "pll3")) {
+		mult = config->pll3_mult;
+	} else if (!strcmp(name, "lb")) {
+		div = cpg_mode & BIT(18) ? 36 : 24;
+	} else if (!strcmp(name, "qspi")) {
+		div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2)
+		    ? 16 : 20;
+	} else if (!strcmp(name, "sdh")) {
+		table = cpg_sdh_div_table;
+		shift = 8;
+	} else if (!strcmp(name, "sd0")) {
+		table = cpg_sd01_div_table;
+		shift = 4;
+	} else if (!strcmp(name, "sd1")) {
+		table = cpg_sd01_div_table;
+		shift = 0;
+	} else if (!strcmp(name, "z")) {
+		return cpg_z_clk_register(cpg);
+	} else {
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!table)
+		return clk_register_fixed_factor(NULL, name, parent_name, 0,
+						 mult, div);
+	else
+		return clk_register_divider_table(NULL, name, parent_name, 0,
+						 cpg->reg + CPG_SDCKCR, shift,
+						 4, 0, table, &cpg->lock);
+}
+
+static void __init rcar_gen2_cpg_clocks_init(struct device_node *np)
+{
+	const struct cpg_pll_config *config;
+	struct rcar_gen2_cpg *cpg;
+	struct clk **clks;
+	unsigned int i;
+	int num_clks;
+
+	num_clks = of_property_count_strings(np, "clock-output-names");
+	if (num_clks < 0) {
+		pr_err("%s: failed to count clocks\n", __func__);
+		return;
+	}
+
+	cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+	clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL);
+	if (cpg == NULL || clks == NULL) {
+		/* We're leaking memory on purpose, there's no point in cleaning
+		 * up as the system won't boot anyway.
+		 */
+		pr_err("%s: failed to allocate cpg\n", __func__);
+		return;
+	}
+
+	spin_lock_init(&cpg->lock);
+
+	cpg->data.clks = clks;
+	cpg->data.clk_num = num_clks;
+
+	cpg->reg = of_iomap(np, 0);
+	if (WARN_ON(cpg->reg == NULL))
+		return;
+
+	config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+	for (i = 0; i < num_clks; ++i) {
+		const char *name;
+		struct clk *clk;
+
+		of_property_read_string_index(np, "clock-output-names", i,
+					      &name);
+
+		clk = rcar_gen2_cpg_register_clock(np, cpg, config, name);
+		if (IS_ERR(clk))
+			pr_err("%s: failed to register %s %s clock (%ld)\n",
+			       __func__, np->name, name, PTR_ERR(clk));
+		else
+			cpg->data.clks[i] = clk;
+	}
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+CLK_OF_DECLARE(rcar_gen2_cpg_clks, "renesas,rcar-gen2-cpg-clocks",
+	       rcar_gen2_cpg_clocks_init);
+
+void __init rcar_gen2_clocks_init(u32 mode)
+{
+	cpg_mode = mode;
+
+	of_clk_init(NULL);
+}

drivers/clocksource/sh_cmt.c

@@ -634,12 +634,18 @@ static int sh_cmt_clock_event_next(unsigned long delta,
 
 static void sh_cmt_clock_event_suspend(struct clock_event_device *ced)
 {
-	pm_genpd_syscore_poweroff(&ced_to_sh_cmt(ced)->pdev->dev);
+	struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+	pm_genpd_syscore_poweroff(&p->pdev->dev);
+	clk_unprepare(p->clk);
 }
 
 static void sh_cmt_clock_event_resume(struct clock_event_device *ced)
 {
-	pm_genpd_syscore_poweron(&ced_to_sh_cmt(ced)->pdev->dev);
+	struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+	clk_prepare(p->clk);
+	pm_genpd_syscore_poweron(&p->pdev->dev);
 }
 
 static void sh_cmt_register_clockevent(struct sh_cmt_priv *p,
@@ -737,6 +743,10 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 		goto err2;
 	}
 
+	ret = clk_prepare(p->clk);
+	if (ret < 0)
+		goto err3;
+
 	if (res2 && (resource_size(res2) == 4)) {
 		/* assume both CMSTR and CMCSR to be 32-bit */
 		p->read_control = sh_cmt_read32;
@@ -773,19 +783,21 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 			      cfg->clocksource_rating);
 	if (ret) {
 		dev_err(&p->pdev->dev, "registration failed\n");
-		goto err3;
+		goto err4;
 	}
 	p->cs_enabled = false;
 
 	ret = setup_irq(irq, &p->irqaction);
 	if (ret) {
 		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		goto err3;
+		goto err4;
 	}
 
 	platform_set_drvdata(pdev, p);
 
 	return 0;
+err4:
+	clk_unprepare(p->clk);
 err3:
 	clk_put(p->clk);
 err2:

drivers/pinctrl/Kconfig

@@ -116,15 +116,22 @@ config PINCTRL_IMX1_CORE
 
 config PINCTRL_IMX27
 	bool "IMX27 pinctrl driver"
-	depends on OF
 	depends on SOC_IMX27
 	select PINCTRL_IMX1_CORE
 	help
 	  Say Y here to enable the imx27 pinctrl driver
 
+
+config PINCTRL_IMX25
+        bool "IMX25 pinctrl driver"
+        depends on OF
+        depends on SOC_IMX25
+        select PINCTRL_IMX
+        help
+          Say Y here to enable the imx25 pinctrl driver
+
 config PINCTRL_IMX35
 	bool "IMX35 pinctrl driver"
-	depends on OF
 	depends on SOC_IMX35
 	select PINCTRL_IMX
 	help
@@ -132,7 +139,6 @@ config PINCTRL_IMX35
 
 config PINCTRL_IMX50
 	bool "IMX50 pinctrl driver"
-	depends on OF
 	depends on SOC_IMX50
 	select PINCTRL_IMX
 	help
@@ -140,7 +146,6 @@ config PINCTRL_IMX50
 
 config PINCTRL_IMX51
 	bool "IMX51 pinctrl driver"
-	depends on OF
 	depends on SOC_IMX51
 	select PINCTRL_IMX
 	help
@@ -148,7 +153,6 @@ config PINCTRL_IMX51
 
 config PINCTRL_IMX53
 	bool "IMX53 pinctrl driver"
-	depends on OF
 	depends on SOC_IMX53
 	select PINCTRL_IMX
 	help
@@ -156,7 +160,6 @@ config PINCTRL_IMX53
 
 config PINCTRL_IMX6Q
 	bool "IMX6Q/DL pinctrl driver"
-	depends on OF
 	depends on SOC_IMX6Q
 	select PINCTRL_IMX
 	help
@@ -164,7 +167,6 @@ config PINCTRL_IMX6Q
 
 config PINCTRL_IMX6SL
 	bool "IMX6SL pinctrl driver"
-	depends on OF
 	depends on SOC_IMX6SL
 	select PINCTRL_IMX
 	help
@@ -172,7 +174,6 @@ config PINCTRL_IMX6SL
 
 config PINCTRL_VF610
 	bool "Freescale Vybrid VF610 pinctrl driver"
-	depends on OF
 	depends on SOC_VF610
 	select PINCTRL_IMX
 	help
@@ -202,6 +203,17 @@ config PINCTRL_IMX28
 	bool
 	select PINCTRL_MXS
 
+config PINCTRL_MSM
+	bool
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+
+config PINCTRL_MSM8X74
+	bool "Qualcomm 8x74 pin controller driver"
+	depends on OF && OF_IRQ
+	select PINCTRL_MSM
+
 config PINCTRL_NOMADIK
 	bool "Nomadik pin controller driver"
 	depends on ARCH_U8500 || ARCH_NOMADIK

drivers/pinctrl/Makefile

@@ -34,7 +34,10 @@ obj-$(CONFIG_PINCTRL_IMX6SL)	+= pinctrl-imx6sl.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
+obj-$(CONFIG_PINCTRL_IMX25)	+= pinctrl-imx25.o
 obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
+obj-$(CONFIG_PINCTRL_MSM)	+= pinctrl-msm.o
+obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
 obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
 obj-$(CONFIG_PINCTRL_STN8815)	+= pinctrl-nomadik-stn8815.o
 obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o

drivers/pinctrl/pinconf.c

@@ -28,12 +28,6 @@ int pinconf_check_ops(struct pinctrl_dev *pctldev)
 {
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
-	/* We must be able to read out pin status */
-	if (!ops->pin_config_get && !ops->pin_config_group_get) {
-		dev_err(pctldev->dev,
-			"pinconf must be able to read out pin status\n");
-		return -EINVAL;
-	}
 	/* We have to be able to config the pins in SOME way */
 	if (!ops->pin_config_set && !ops->pin_config_group_set) {
 		dev_err(pctldev->dev,
@@ -67,9 +61,9 @@ int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin,
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 
 	if (!ops || !ops->pin_config_get) {
-		dev_err(pctldev->dev, "cannot get pin configuration, missing "
+		dev_dbg(pctldev->dev, "cannot get pin configuration, missing "
 			"pin_config_get() function in driver\n");
-		return -EINVAL;
+		return -ENOTSUPP;
 	}
 
 	return ops->pin_config_get(pctldev, pin, config);
@@ -93,10 +87,10 @@ int pin_config_group_get(const char *dev_name, const char *pin_group,
 	ops = pctldev->desc->confops;
 
 	if (!ops || !ops->pin_config_group_get) {
-		dev_err(pctldev->dev, "cannot get configuration for pin "
+		dev_dbg(pctldev->dev, "cannot get configuration for pin "
 			"group, missing group config get function in "
 			"driver\n");
-		ret = -EINVAL;
+		ret = -ENOTSUPP;
 		goto unlock;
 	}
 
@@ -305,9 +299,6 @@ static int pinconf_pins_show(struct seq_file *s, void *what)
 	const struct pinconf_ops *ops = pctldev->desc->confops;
 	unsigned i, pin;
 
-	if (!ops || !ops->pin_config_get)
-		return 0;
-
 	seq_puts(s, "Pin config settings per pin\n");
 	seq_puts(s, "Format: pin (name): configs\n");
 
@@ -356,9 +347,6 @@ static int pinconf_groups_show(struct seq_file *s, void *what)
 	unsigned ngroups = pctlops->get_groups_count(pctldev);
 	unsigned selector = 0;
 
-	if (!ops || !ops->pin_config_group_get)
-		return 0;
-
 	seq_puts(s, "Pin config settings per pin group\n");
 	seq_puts(s, "Format: group (name): configs\n");
 

drivers/pinctrl/pinctrl-at91.c

@@ -118,7 +118,7 @@ struct at91_pin_group {
 };
 
 /**
- * struct at91_pinctrl_mux_ops - describes an At91 mux ops group
+ * struct at91_pinctrl_mux_ops - describes an AT91 mux ops group
  * on new IP with support for periph C and D the way to mux in
  * periph A and B has changed
  * So provide the right call back
@@ -722,7 +722,8 @@ static int at91_pinconf_get(struct pinctrl_dev *pctldev,
 	unsigned pin;
 	int div;
 
-	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__, __LINE__, pin_id, *config);
+	*config = 0;
+	dev_dbg(info->dev, "%s:%d, pin_id=%d", __func__, __LINE__, pin_id);
 	pio = pin_to_controller(info, pin_to_bank(pin_id));
 	pin = pin_id % MAX_NB_GPIO_PER_BANK;
 
@@ -1396,7 +1397,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 	chained_irq_enter(chip, desc);
 	for (;;) {
 		/* Reading ISR acks pending (edge triggered) GPIO interrupts.
-		 * When there none are pending, we're finished unless we need
+		 * When there are none pending, we're finished unless we need
 		 * to process multiple banks (like ID_PIOCDE on sam9263).
 		 */
 		isr = readl_relaxed(pio + PIO_ISR) & readl_relaxed(pio + PIO_IMR);
@@ -1505,7 +1506,7 @@ static int at91_gpio_of_irq_setup(struct device_node *node,
 		prev = gpio_chips[at91_gpio->pioc_idx - 1];
 
 	/* The top level handler handles one bank of GPIOs, except
-	 * on some SoC it can handles up to three...
+	 * on some SoC it can handle up to three...
 	 * We only set up the handler for the first of the list.
 	 */
 	if (prev && prev->next == at91_gpio)

drivers/pinctrl/pinctrl-baytrail.c

@@ -286,13 +286,19 @@ static void byt_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 	spin_lock_irqsave(&vg->lock, flags);
 
 	for (i = 0; i < vg->chip.ngpio; i++) {
+		const char *label;
 		offs = vg->range->pins[i] * 16;
 		conf0 = readl(vg->reg_base + offs + BYT_CONF0_REG);
 		val = readl(vg->reg_base + offs + BYT_VAL_REG);
 
+		label = gpiochip_is_requested(chip, i);
+		if (!label)
+			label = "Unrequested";
+
 		seq_printf(s,
-			   " gpio-%-3d %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s\n",
+			   " gpio-%-3d (%-20.20s) %s %s %s pad-%-3d offset:0x%03x mux:%d %s%s%s\n",
 			   i,
+			   label,
 			   val & BYT_INPUT_EN ? "  " : "in",
 			   val & BYT_OUTPUT_EN ? "   " : "out",
 			   val & BYT_LEVEL ? "hi" : "lo",
@@ -366,11 +372,33 @@ static void byt_irq_mask(struct irq_data *d)
 {
 }
 
+static unsigned int byt_irq_startup(struct irq_data *d)
+{
+	struct byt_gpio *vg = irq_data_get_irq_chip_data(d);
+
+	if (gpio_lock_as_irq(&vg->chip, irqd_to_hwirq(d)))
+		dev_err(vg->chip.dev,
+			"unable to lock HW IRQ %lu for IRQ\n",
+			irqd_to_hwirq(d));
+	byt_irq_unmask(d);
+	return 0;
+}
+
+static void byt_irq_shutdown(struct irq_data *d)
+{
+	struct byt_gpio *vg = irq_data_get_irq_chip_data(d);
+
+	byt_irq_mask(d);
+	gpio_unlock_as_irq(&vg->chip, irqd_to_hwirq(d));
+}
+
 static struct irq_chip byt_irqchip = {
 	.name = "BYT-GPIO",
 	.irq_mask = byt_irq_mask,
 	.irq_unmask = byt_irq_unmask,
 	.irq_set_type = byt_irq_type,
+	.irq_startup = byt_irq_startup,
+	.irq_shutdown = byt_irq_shutdown,
 };
 
 static void byt_gpio_irq_init_hw(struct byt_gpio *vg)

drivers/pinctrl/pinctrl-imx1-core.c

@@ -638,6 +638,13 @@ int imx1_pinctrl_core_probe(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
+	ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+	if (ret) {
+		pinctrl_unregister(ipctl->pctl);
+		dev_err(&pdev->dev, "Failed to populate subdevices\n");
+		return ret;
+	}
+
 	dev_info(&pdev->dev, "initialized IMX pinctrl driver\n");
 
 	return 0;

drivers/pinctrl/pinctrl-msm.h

+/*
+ * Copyright (c) 2013, Sony Mobile Communications AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PINCTRL_MSM_H__
+#define __PINCTRL_MSM_H__
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/machine.h>
+
+/**
+ * struct msm_function - a pinmux function
+ * @name:    Name of the pinmux function.
+ * @groups:  List of pingroups for this function.
+ * @ngroups: Number of entries in @groups.
+ */
+struct msm_function {
+	const char *name;
+	const char * const *groups;
+	unsigned ngroups;
+};
+
+/**
+ * struct msm_pingroup - Qualcomm pingroup definition
+ * @name:                 Name of the pingroup.
+ * @pins:	          A list of pins assigned to this pingroup.
+ * @npins:	          Number of entries in @pins.
+ * @funcs:                A list of pinmux functions that can be selected for
+ *                        this group. The index of the selected function is used
+ *                        for programming the function selector.
+ *                        Entries should be indices into the groups list of the
+ *                        struct msm_pinctrl_soc_data.
+ * @ctl_reg:              Offset of the register holding control bits for this group.
+ * @io_reg:               Offset of the register holding input/output bits for this group.
+ * @intr_cfg_reg:         Offset of the register holding interrupt configuration bits.
+ * @intr_status_reg:      Offset of the register holding the status bits for this group.
+ * @intr_target_reg:      Offset of the register specifying routing of the interrupts
+ *                        from this group.
+ * @mux_bit:              Offset in @ctl_reg for the pinmux function selection.
+ * @pull_bit:             Offset in @ctl_reg for the bias configuration.
+ * @drv_bit:              Offset in @ctl_reg for the drive strength configuration.
+ * @oe_bit:               Offset in @ctl_reg for controlling output enable.
+ * @in_bit:               Offset in @io_reg for the input bit value.
+ * @out_bit:              Offset in @io_reg for the output bit value.
+ * @intr_enable_bit:      Offset in @intr_cfg_reg for enabling the interrupt for this group.
+ * @intr_status_bit:      Offset in @intr_status_reg for reading and acking the interrupt
+ *                        status.
+ * @intr_target_bit:      Offset in @intr_target_reg for configuring the interrupt routing.
+ * @intr_raw_status_bit:  Offset in @intr_cfg_reg for the raw status bit.
+ * @intr_polarity_bit:    Offset in @intr_cfg_reg for specifying polarity of the interrupt.
+ * @intr_detection_bit:   Offset in @intr_cfg_reg for specifying interrupt type.
+ * @intr_detection_width: Number of bits used for specifying interrupt type,
+ *                        Should be 2 for SoCs that can detect both edges in hardware,
+ *                        otherwise 1.
+ */
+struct msm_pingroup {
+	const char *name;
+	const unsigned *pins;
+	unsigned npins;
+
+	unsigned funcs[8];
+
+	s16 ctl_reg;
+	s16 io_reg;
+	s16 intr_cfg_reg;
+	s16 intr_status_reg;
+	s16 intr_target_reg;
+
+	unsigned mux_bit:5;
+
+	unsigned pull_bit:5;
+	unsigned drv_bit:5;
+
+	unsigned oe_bit:5;
+	unsigned in_bit:5;
+	unsigned out_bit:5;
+
+	unsigned intr_enable_bit:5;
+	unsigned intr_status_bit:5;
+
+	unsigned intr_target_bit:5;
+	unsigned intr_raw_status_bit:5;
+	unsigned intr_polarity_bit:5;
+	unsigned intr_detection_bit:5;
+	unsigned intr_detection_width:5;
+};
+
+/**
+ * struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration
+ * @pins:       An array describing all pins the pin controller affects.
+ * @npins:      The number of entries in @pins.
+ * @functions:  An array describing all mux functions the SoC supports.
+ * @nfunctions: The number of entries in @functions.
+ * @groups:     An array describing all pin groups the pin SoC supports.
+ * @ngroups:    The numbmer of entries in @groups.
+ * @ngpio:      The number of pingroups the driver should expose as GPIOs.
+ */
+struct msm_pinctrl_soc_data {
+	const struct pinctrl_pin_desc *pins;
+	unsigned npins;
+	const struct msm_function *functions;
+	unsigned nfunctions;
+	const struct msm_pingroup *groups;
+	unsigned ngroups;
+	unsigned ngpios;
+};
+
+int msm_pinctrl_probe(struct platform_device *pdev,
+		      const struct msm_pinctrl_soc_data *soc_data);
+int msm_pinctrl_remove(struct platform_device *pdev);
+
+#endif

drivers/pinctrl/pinctrl-nomadik.c

@@ -1060,14 +1060,14 @@ static void nmk_gpio_dbg_show_one(struct seq_file *s,
 		   (mode < 0) ? "unknown" : modes[mode],
 		   pull ? "pull" : "none");
 
-	if (label && !is_out) {
-		int		irq = gpio_to_irq(gpio);
+	if (!is_out) {
+		int irq = gpio_to_irq(gpio);
 		struct irq_desc	*desc = irq_to_desc(irq);
 
 		/* This races with request_irq(), set_irq_type(),
 		 * and set_irq_wake() ... but those are "rare".
 		 */
-		if (irq >= 0 && desc->action) {
+		if (irq > 0 && desc && desc->action) {
 			char *trigger;
 			u32 bitmask = nmk_gpio_get_bitmask(gpio);
 

drivers/pinctrl/sh-pfc/core.h

@@ -37,7 +37,9 @@ struct sh_pfc {
 	spinlock_t lock;
 
 	unsigned int num_windows;
-	struct sh_pfc_window *window;
+	struct sh_pfc_window *windows;
+	unsigned int num_irqs;
+	unsigned int *irqs;
 
 	struct sh_pfc_pin_range *ranges;
 	unsigned int nr_ranges;

drivers/pinctrl/sh-pfc/gpio.c

@@ -204,18 +204,24 @@ static void gpio_pin_set(struct gpio_chip *gc, unsigned offset, int value)
 static int gpio_pin_to_irq(struct gpio_chip *gc, unsigned offset)
 {
 	struct sh_pfc *pfc = gpio_to_pfc(gc);
-	int i, k;
+	unsigned int i, k;
 
 	for (i = 0; i < pfc->info->gpio_irq_size; i++) {
-		unsigned short *gpios = pfc->info->gpio_irq[i].gpios;
+		short *gpios = pfc->info->gpio_irq[i].gpios;
 
-		for (k = 0; gpios[k]; k++) {
+		for (k = 0; gpios[k] >= 0; k++) {
 			if (gpios[k] == offset)
-				return pfc->info->gpio_irq[i].irq;
+				goto found;
 		}
 	}
 
 	return -ENOSYS;
+
+found:
+	if (pfc->num_irqs)
+		return pfc->irqs[i];
+	else
+		return pfc->info->gpio_irq[i].irq;
 }
 
 static int gpio_pin_setup(struct sh_pfc_chip *chip)
@@ -347,7 +353,7 @@ int sh_pfc_register_gpiochip(struct sh_pfc *pfc)
 	 * GPIOs.
 	 */
 	for (i = 0; i < pfc->num_windows; ++i) {
-		struct sh_pfc_window *window = &pfc->window[i];
+		struct sh_pfc_window *window = &pfc->windows[i];
 
 		if (pfc->info->data_regs[0].reg >= window->phys &&
 		    pfc->info->data_regs[0].reg < window->phys + window->size)
@@ -357,8 +363,14 @@ int sh_pfc_register_gpiochip(struct sh_pfc *pfc)
 	if (i == pfc->num_windows)
 		return 0;
 
+	/* If we have IRQ resources make sure their number is correct. */
+	if (pfc->num_irqs && pfc->num_irqs != pfc->info->gpio_irq_size) {
+		dev_err(pfc->dev, "invalid number of IRQ resources\n");
+		return -EINVAL;
+	}
+
 	/* Register the real GPIOs chip. */
-	chip = sh_pfc_add_gpiochip(pfc, gpio_pin_setup, &pfc->window[i]);
+	chip = sh_pfc_add_gpiochip(pfc, gpio_pin_setup, &pfc->windows[i]);
 	if (IS_ERR(chip))
 		return PTR_ERR(chip);
 

drivers/pinctrl/sh-pfc/pfc-r8a73a4.c

@@ -2061,17 +2061,6 @@ static const struct sh_pfc_function pinmux_functions[] = {
 	SH_PFC_FUNCTION(sdhi2),
 };
 
-#undef PORTCR
-#define PORTCR(nr, reg)							\
-	{								\
-		PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-			_PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT),	\
-				PORT##nr##_FN0, PORT##nr##_FN1,		\
-				PORT##nr##_FN2, PORT##nr##_FN3,		\
-				PORT##nr##_FN4, PORT##nr##_FN5,		\
-				PORT##nr##_FN6, PORT##nr##_FN7 }	\
-	}
-
 static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000),
 	PORTCR(1, 0xe6050001),
@@ -2691,7 +2680,7 @@ static unsigned int r8a73a4_pinmux_get_bias(struct sh_pfc *pfc,
 {
 	void __iomem *addr;
 
-	addr = pfc->window->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
+	addr = pfc->windows->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
 
 	switch (ioread8(addr) & PORTCR_PULMD_MASK) {
 	case PORTCR_PULMD_UP:
@@ -2710,7 +2699,7 @@ static void r8a73a4_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin,
 	void __iomem *addr;
 	u32 value;
 
-	addr = pfc->window->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
+	addr = pfc->windows->virt + r8a73a4_portcr_offsets[pin >> 5] + pin;
 	value = ioread8(addr) & ~PORTCR_PULMD_MASK;
 
 	switch (bias) {

drivers/pinctrl/sh-pfc/sh_pfc.h

@@ -94,11 +94,11 @@ struct pinmux_data_reg {
 
 struct pinmux_irq {
 	int irq;
-	unsigned short *gpios;
+	short *gpios;
 };
 
 #define PINMUX_IRQ(irq_nr, ids...)			   \
-	{ .irq = irq_nr, .gpios = (unsigned short []) { ids, 0 } }	\
+	{ .irq = irq_nr, .gpios = (short []) { ids, -1 } }
 
 struct pinmux_range {
 	u16 begin;
@@ -304,8 +304,7 @@ struct sh_pfc_soc_info {
 #define PORTCR(nr, reg)							\
 	{								\
 		PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-			_PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-			      PORT##nr##_IN_PU, PORT##nr##_OUT),	\
+			_PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT),	\
 				PORT##nr##_FN0, PORT##nr##_FN1,		\
 				PORT##nr##_FN2, PORT##nr##_FN3,		\
 				PORT##nr##_FN4, PORT##nr##_FN5,		\