mtd: spi-nor: Decouple SPI NOR's device_node from controller device

The problem this patch is trying to address is such, that SPI NOR flash
devices attached to a dedicated SPI NOR controller cannot read their
properties from the associated struct device_node.

A couple of facts first:
1) Each SPI NOR flash has a struct spi_nor associated with it.
2) Each SPI NOR flash has certain device properties associated
   with it, for example the OF property 'm25p,fast-read' is a
   good pick. These properties are used by the SPI NOR core to
   select which opcodes are sent to such SPI NOR flash. These
   properties are coming from spi_nor .dev->of_node .

The problem is, that for SPI NOR controllers, the struct spi_nor .dev
element points to the struct device of the SPI NOR controller, not the
SPI NOR flash. Therefore, the associated dev->of_node also is the
one of the controller and therefore the SPI NOR core code is trying to
parse the SPI NOR controller's properties, not the properties of the
SPI NOR flash.

Note: The m25p80 driver is not affected, because the controller and
      the flash are the same device, so the associated device_node
      of the controller and the flash are the same.

This patch adjusts the SPI NOR core such that the device_node is not
picked from spi_nor .dev directly, but from a new separate spi_nor
.flash_node element. This let's the SPI NOR controller drivers set up
a different spi_nor .flash_node element for each SPI NOR flash.

This patch also fixes the controller drivers to be compatible with
this modification and correctly set the spi_nor .flash_node element.

This patch is inspired by 5844feea
mtd: nand: add common DT init code
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

drivers/mtd/devices/m25p80.c

@@ -200,6 +200,7 @@ static int m25p_probe(struct spi_device *spi)
 	nor->read_reg = m25p80_read_reg;
 
 	nor->dev = &spi->dev;
+	nor->flash_node = spi->dev.of_node;
 	nor->priv = flash;
 
 	spi_set_drvdata(spi, flash);

drivers/mtd/spi-nor/fsl-quadspi.c

@@ -1013,6 +1013,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
 		mtd = &nor->mtd;
 
 		nor->dev = dev;
+		nor->flash_node = np;
 		nor->priv = q;
 
 		/* fill the hooks */

drivers/mtd/spi-nor/nxp-spifi.c

@@ -331,6 +331,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
 	writel(ctrl, spifi->io_base + SPIFI_CTRL);
 
 	spifi->nor.dev   = spifi->dev;
+	spifi->nor.flash_node = np;
 	spifi->nor.priv  = spifi;
 	spifi->nor.read  = nxp_spifi_read;
 	spifi->nor.write = nxp_spifi_write;

drivers/mtd/spi-nor/spi-nor.c

@@ -1005,7 +1005,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
 	const struct flash_info *info = NULL;
 	struct device *dev = nor->dev;
 	struct mtd_info *mtd = &nor->mtd;
-	struct device_node *np = dev->of_node;
+	struct device_node *np = nor->flash_node;
 	int ret;
 	int i;
 

include/linux/mtd/spi-nor.h

@@ -134,6 +134,7 @@ struct mtd_info;
  * @mtd:		point to a mtd_info structure
  * @lock:		the lock for the read/write/erase/lock/unlock operations
  * @dev:		point to a spi device, or a spi nor controller device.
+ * @flash_node:		point to a device node describing this flash instance.
  * @page_size:		the page size of the SPI NOR
  * @addr_width:		number of address bytes
  * @erase_opcode:	the opcode for erasing a sector
@@ -165,6 +166,7 @@ struct spi_nor {
 	struct mtd_info		mtd;
 	struct mutex		lock;
 	struct device		*dev;
+	struct device_node	*flash_node;
 	u32			page_size;
 	u8			addr_width;
 	u8			erase_opcode;