ARM: 7161/1: errata: no automatic store buffer drain

This patch implements a workaround for PL310 erratum 769419. On
revisions of the PL310 prior to r3p2, the Store Buffer does not
automatically drain. This can cause normal, non-cacheable writes to be
retained when the memory system is idle, leading to suboptimal I/O
performance for drivers using coherent DMA.

This patch adds an optional wmb() call to the cpu_idle loop. On systems
with an outer cache, this causes an explicit flush of the store buffer.

Cc: stable@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -1352,6 +1352,18 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config PL310_ERRATA_769419
+	bool "PL310 errata: no automatic Store Buffer drain"
+	depends on CACHE_L2X0
+	help
+	  On revisions of the PL310 prior to r3p2, the Store Buffer does
+	  not automatically drain. This can cause normal, non-cacheable
+	  writes to be retained when the memory system is idle, leading
+	  to suboptimal I/O performance for drivers using coherent DMA.
+	  This option adds a write barrier to the cpu_idle loop so that,
+	  on systems with an outer cache, the store buffer is drained
+	  explicitly.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

arch/arm/kernel/process.c

@@ -192,6 +192,9 @@ void cpu_idle(void)
 #endif
 
 			local_irq_disable();
+#ifdef CONFIG_PL310_ERRATA_769419
+			wmb();
+#endif
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();