drm/i915/guc: Combine enable_guc_loading|submission modparams

We currently have two module parameters that control GuC:
"enable_guc_loading" and "enable_guc_submission". Whenever
we need submission=1, we also need loading=1. We also need
loading=1 when we want to want to load and verify the HuC.

Lets combine above module parameters into one "enable_guc"
modparam. New supported bit values are:

 0=disable GuC (no GuC submission, no HuC)
 1=enable GuC submission
 2=enable HuC load

Special value "-1" can be used to let driver decide what
option should be enabled for given platform based on
hardware/firmware availability or preference.

Explicit enabling any of the GuC features makes GuC load
a required step, fallback to non-GuC mode will not be
supported.

v2: Don't use -EIO
v3: define modparam bits (Chris)
v4: rely on implicit cast (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-6-michal.wajdeczko@intel.com

drivers/gpu/drm/i915/i915_drv.h

@@ -3240,8 +3240,9 @@ intel_info(const struct drm_i915_private *dev_priv)
 #define HAS_HUC_UCODE(dev_priv)	(HAS_GUC(dev_priv))
 
 /* Having a GuC is not the same as using a GuC */
-#define USES_GUC(dev_priv)		(i915_modparams.enable_guc_loading)
-#define USES_GUC_SUBMISSION(dev_priv)	(i915_modparams.enable_guc_submission)
+#define USES_GUC(dev_priv)		intel_uc_is_using_guc()
+#define USES_GUC_SUBMISSION(dev_priv)	intel_uc_is_using_guc_submission()
+#define USES_HUC(dev_priv)		intel_uc_is_using_huc()
 
 #define HAS_RESOURCE_STREAMER(dev_priv) ((dev_priv)->info.has_resource_streamer)
 

drivers/gpu/drm/i915/i915_params.c

@@ -147,13 +147,10 @@ i915_param_named_unsafe(edp_vswing, int, 0400,
 	"(0=use value from vbt [default], 1=low power swing(200mV),"
 	"2=default swing(400mV))");
 
-i915_param_named_unsafe(enable_guc_loading, int, 0400,
-	"Enable GuC firmware loading "
-	"(-1=auto, 0=never [default], 1=if available, 2=required)");
-
-i915_param_named_unsafe(enable_guc_submission, int, 0400,
-	"Enable GuC submission "
-	"(-1=auto, 0=never [default], 1=if available, 2=required)");
+i915_param_named_unsafe(enable_guc, int, 0400,
+	"Enable GuC load for GuC submission and/or HuC load. "
+	"Required functionality can be selected using bitmask values. "
+	"(-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load)");
 
 i915_param_named(guc_log_level, int, 0400,
 	"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");

drivers/gpu/drm/i915/i915_params.h

@@ -25,8 +25,12 @@
 #ifndef _I915_PARAMS_H_
 #define _I915_PARAMS_H_
 
+#include <linux/bitops.h>
 #include <linux/cache.h> /* for __read_mostly */
 
+#define ENABLE_GUC_SUBMISSION		BIT(0)
+#define ENABLE_GUC_LOAD_HUC		BIT(1)
+
 #define I915_PARAMS_FOR_EACH(param) \
 	param(char *, vbt_firmware, NULL) \
 	param(int, modeset, -1) \
@@ -41,8 +45,7 @@
 	param(int, disable_power_well, -1) \
 	param(int, enable_ips, 1) \
 	param(int, invert_brightness, 0) \
-	param(int, enable_guc_loading, 0) \
-	param(int, enable_guc_submission, 0) \
+	param(int, enable_guc, 0) \
 	param(int, guc_log_level, -1) \
 	param(char *, guc_firmware_path, NULL) \
 	param(char *, huc_firmware_path, NULL) \

drivers/gpu/drm/i915/intel_uc.c

@@ -47,35 +47,65 @@ static int __intel_uc_reset_hw(struct drm_i915_private *dev_priv)
 	return ret;
 }
 
-void intel_uc_sanitize_options(struct drm_i915_private *dev_priv)
+static int __get_platform_enable_guc(struct drm_i915_private *dev_priv)
 {
-	if (!HAS_GUC(dev_priv)) {
-		if (i915_modparams.enable_guc_loading > 0 ||
-		    i915_modparams.enable_guc_submission > 0)
-			DRM_INFO("Ignoring GuC options, no hardware\n");
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.fw;
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
+	int enable_guc = 0;
 
-		i915_modparams.enable_guc_loading = 0;
-		i915_modparams.enable_guc_submission = 0;
-		return;
-	}
+	/* Default is to enable GuC/HuC if we know their firmwares */
+	if (intel_uc_fw_is_selected(guc_fw))
+		enable_guc |= ENABLE_GUC_SUBMISSION;
+	if (intel_uc_fw_is_selected(huc_fw))
+		enable_guc |= ENABLE_GUC_LOAD_HUC;
 
-	/* A negative value means "use platform default" */
-	if (i915_modparams.enable_guc_loading < 0)
-		i915_modparams.enable_guc_loading = HAS_GUC_UCODE(dev_priv);
+	/* Any platform specific fine-tuning can be done here */
 
-	/* Verify firmware version */
-	if (i915_modparams.enable_guc_loading) {
-		if (!intel_uc_fw_is_selected(&dev_priv->guc.fw))
-			i915_modparams.enable_guc_loading = 0;
-	}
+	return enable_guc;
+}
 
-	/* Can't enable guc submission without guc loaded */
-	if (!i915_modparams.enable_guc_loading)
-		i915_modparams.enable_guc_submission = 0;
+/**
+ * intel_uc_sanitize_options - sanitize uC related modparam options
+ * @dev_priv: device private
+ *
+ * In case of "enable_guc" option this function will attempt to modify
+ * it only if it was initially set to "auto(-1)". Default value for this
+ * modparam varies between platforms and it is hardcoded in driver code.
+ * Any other modparam value is only monitored against availability of the
+ * related hardware or firmware definitions.
+ */
+void intel_uc_sanitize_options(struct drm_i915_private *dev_priv)
+{
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.fw;
+	struct intel_uc_fw *huc_fw = &dev_priv->huc.fw;
 
 	/* A negative value means "use platform default" */
-	if (i915_modparams.enable_guc_submission < 0)
-		i915_modparams.enable_guc_submission = HAS_GUC_SCHED(dev_priv);
+	if (i915_modparams.enable_guc < 0)
+		i915_modparams.enable_guc = __get_platform_enable_guc(dev_priv);
+
+	DRM_DEBUG_DRIVER("enable_guc=%d (submission:%s huc:%s)\n",
+			 i915_modparams.enable_guc,
+			 yesno(intel_uc_is_using_guc_submission()),
+			 yesno(intel_uc_is_using_huc()));
+
+	/* Verify GuC firmware availability */
+	if (intel_uc_is_using_guc() && !intel_uc_fw_is_selected(guc_fw)) {
+		DRM_WARN("Incompatible option detected: enable_guc=%d, %s!\n",
+			 i915_modparams.enable_guc,
+			 !HAS_GUC(dev_priv) ? "no GuC hardware" :
+					      "no GuC firmware");
+	}
+
+	/* Verify HuC firmware availability */
+	if (intel_uc_is_using_huc() && !intel_uc_fw_is_selected(huc_fw)) {
+		DRM_WARN("Incompatible option detected: enable_guc=%d, %s!\n",
+			 i915_modparams.enable_guc,
+			 !HAS_HUC(dev_priv) ? "no HuC hardware" :
+					      "no HuC firmware");
+	}
+
+	/* Make sure that sanitization was done */
+	GEM_BUG_ON(i915_modparams.enable_guc < 0);
 }
 
 void intel_uc_init_early(struct drm_i915_private *dev_priv)
@@ -161,6 +191,11 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 	if (!USES_GUC(dev_priv))
 		return 0;
 
+	if (!HAS_GUC(dev_priv)) {
+		ret = -ENODEV;
+		goto err_out;
+	}
+
 	guc_disable_communication(guc);
 	gen9_reset_guc_interrupts(dev_priv);
 
@@ -235,12 +270,6 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 
 	/*
 	 * We've failed to load the firmware :(
-	 *
-	 * Decide whether to disable GuC submission and fall back to
-	 * execlist mode, and whether to hide the error by returning
-	 * zero or to return -EIO, which the caller will treat as a
-	 * nonfatal error (i.e. it doesn't prevent driver load, but
-	 * marks the GPU as wedged until reset).
 	 */
 err_interrupts:
 	guc_disable_communication(guc);
@@ -252,23 +281,15 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)
 		intel_guc_submission_fini(guc);
 err_guc:
 	i915_ggtt_disable_guc(dev_priv);
+err_out:
+	/*
+	 * Note that there is no fallback as either user explicitly asked for
+	 * the GuC or driver default option was to run with the GuC enabled.
+	 */
+	if (GEM_WARN_ON(ret == -EIO))
+		ret = -EINVAL;
 
-	if (i915_modparams.enable_guc_loading > 1 ||
-	    i915_modparams.enable_guc_submission > 1) {
-		DRM_ERROR("GuC init failed. Firmware loading disabled.\n");
-		ret = -EIO;
-	} else {
-		DRM_NOTE("GuC init failed. Firmware loading disabled.\n");
-		ret = 0;
-	}
-
-	if (USES_GUC_SUBMISSION(dev_priv)) {
-		i915_modparams.enable_guc_submission = 0;
-		DRM_NOTE("Falling back from GuC submission to execlist mode\n");
-	}
-
-	i915_modparams.enable_guc_loading = 0;
-
+	dev_err(dev_priv->drm.dev, "GuC initialization failed %d\n", ret);
 	return ret;
 }
 

drivers/gpu/drm/i915/intel_uc.h

@@ -26,6 +26,7 @@
 
 #include "intel_guc.h"
 #include "intel_huc.h"
+#include "i915_params.h"
 
 void intel_uc_sanitize_options(struct drm_i915_private *dev_priv);
 void intel_uc_init_early(struct drm_i915_private *dev_priv);
@@ -35,4 +36,22 @@ void intel_uc_fini_fw(struct drm_i915_private *dev_priv);
 int intel_uc_init_hw(struct drm_i915_private *dev_priv);
 void intel_uc_fini_hw(struct drm_i915_private *dev_priv);
 
+static inline bool intel_uc_is_using_guc(void)
+{
+	GEM_BUG_ON(i915_modparams.enable_guc < 0);
+	return i915_modparams.enable_guc > 0;
+}
+
+static inline bool intel_uc_is_using_guc_submission(void)
+{
+	GEM_BUG_ON(i915_modparams.enable_guc < 0);
+	return i915_modparams.enable_guc & ENABLE_GUC_SUBMISSION;
+}
+
+static inline bool intel_uc_is_using_huc(void)
+{
+	GEM_BUG_ON(i915_modparams.enable_guc < 0);
+	return i915_modparams.enable_guc & ENABLE_GUC_LOAD_HUC;
+}
+
 #endif