arm64: perf/kvm: Use a common PMU cycle counter define

The PMUv3 and KVM code each have a define for the PMU cycle counter
index. Move KVM's define to a shared location and use it for PMUv3
driver.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-5-280a8d7ff465@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

arch/arm64/kvm/sys_regs.c

@@ -18,6 +18,7 @@
 #include <linux/printk.h>
 #include <linux/uaccess.h>
 
+#include <asm/arm_pmuv3.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/debug-monitors.h>

drivers/perf/arm_pmuv3.c

@@ -451,11 +451,6 @@ static const struct attribute_group armv8_pmuv3_caps_attr_group = {
 	.attrs = armv8_pmuv3_caps_attrs,
 };
 
-/*
- * Perf Events' indices
- */
-#define	ARMV8_IDX_CYCLE_COUNTER	31
-
 /*
  * We unconditionally enable ARMv8.5-PMU long event counter support
  * (64-bit events) where supported. Indicate if this arm_pmu has long
@@ -574,7 +569,7 @@ static u64 armv8pmu_read_counter(struct perf_event *event)
 	int idx = hwc->idx;
 	u64 value;
 
-	if (idx == ARMV8_IDX_CYCLE_COUNTER)
+	if (idx == ARMV8_PMU_CYCLE_IDX)
 		value = read_pmccntr();
 	else
 		value = armv8pmu_read_hw_counter(event);
@@ -607,7 +602,7 @@ static void armv8pmu_write_counter(struct perf_event *event, u64 value)
 
 	value = armv8pmu_bias_long_counter(event, value);
 
-	if (idx == ARMV8_IDX_CYCLE_COUNTER)
+	if (idx == ARMV8_PMU_CYCLE_IDX)
 		write_pmccntr(value);
 	else
 		armv8pmu_write_hw_counter(event, value);
@@ -644,7 +639,7 @@ static void armv8pmu_write_event_type(struct perf_event *event)
 		armv8pmu_write_evtype(idx - 1, hwc->config_base);
 		armv8pmu_write_evtype(idx, chain_evt);
 	} else {
-		if (idx == ARMV8_IDX_CYCLE_COUNTER)
+		if (idx == ARMV8_PMU_CYCLE_IDX)
 			write_pmccfiltr(hwc->config_base);
 		else
 			armv8pmu_write_evtype(idx, hwc->config_base);
@@ -772,7 +767,7 @@ static void armv8pmu_enable_user_access(struct arm_pmu *cpu_pmu)
 	/* Clear any unused counters to avoid leaking their contents */
 	for_each_andnot_bit(i, cpu_pmu->cntr_mask, cpuc->used_mask,
 			    ARMPMU_MAX_HWEVENTS) {
-		if (i == ARMV8_IDX_CYCLE_COUNTER)
+		if (i == ARMV8_PMU_CYCLE_IDX)
 			write_pmccntr(0);
 		else
 			armv8pmu_write_evcntr(i, 0);
@@ -933,8 +928,8 @@ static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
 	/* Always prefer to place a cycle counter into the cycle counter. */
 	if ((evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) &&
 	    !armv8pmu_event_get_threshold(&event->attr)) {
-		if (!test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask))
-			return ARMV8_IDX_CYCLE_COUNTER;
+		if (!test_and_set_bit(ARMV8_PMU_CYCLE_IDX, cpuc->used_mask))
+			return ARMV8_PMU_CYCLE_IDX;
 		else if (armv8pmu_event_is_64bit(event) &&
 			   armv8pmu_event_want_user_access(event) &&
 			   !armv8pmu_has_long_event(cpu_pmu))
@@ -1196,7 +1191,7 @@ static void __armv8pmu_probe_pmu(void *info)
 		   0, FIELD_GET(ARMV8_PMU_PMCR_N, armv8pmu_pmcr_read()));
 
 	/* Add the CPU cycles counter */
-	set_bit(ARMV8_IDX_CYCLE_COUNTER, cpu_pmu->cntr_mask);
+	set_bit(ARMV8_PMU_CYCLE_IDX, cpu_pmu->cntr_mask);
 
 	pmceid[0] = pmceid_raw[0] = read_pmceid0();
 	pmceid[1] = pmceid_raw[1] = read_pmceid1();

include/kvm/arm_pmu.h

@@ -10,7 +10,6 @@
 #include <linux/perf_event.h>
 #include <linux/perf/arm_pmuv3.h>
 
-#define ARMV8_PMU_CYCLE_IDX		(ARMV8_PMU_MAX_COUNTERS - 1)
 
 #if IS_ENABLED(CONFIG_HW_PERF_EVENTS) && IS_ENABLED(CONFIG_KVM)
 struct kvm_pmc {

include/linux/perf/arm_pmuv3.h

@@ -9,6 +9,9 @@
 #define ARMV8_PMU_MAX_GENERAL_COUNTERS	31
 #define ARMV8_PMU_MAX_COUNTERS	32
 
+#define ARMV8_PMU_CYCLE_IDX		31
+
+
 /*
  * Common architectural and microarchitectural event numbers.
  */