drm/i915/dp: Remove -1/+1 from t11_t12 for Gen9_LP/CNP case

Now the VBT.seq->t11_t12 value adds 100ms to both Gen9_LP
as well as non Gen9_LP cases so no need to special case
and do -1 during HW readout and +1 during pp_div write
for Gen9_LP/CNP case.
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1498504905-21067-2-git-send-email-manasi.d.navare@intel.comSigned-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drivers/gpu/drm/i915/intel_dp.c

@@ -5203,12 +5203,8 @@ intel_pps_readout_hw_state(struct drm_i915_private *dev_priv,
 		   PANEL_POWER_DOWN_DELAY_SHIFT;
 
 	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
-		u16 tmp = (pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
-			BXT_POWER_CYCLE_DELAY_SHIFT;
-		if (tmp > 0)
-			seq->t11_t12 = (tmp - 1) * 1000;
-		else
-			seq->t11_t12 = 0;
+		seq->t11_t12 = ((pp_ctl & BXT_POWER_CYCLE_DELAY_MASK) >>
+				BXT_POWER_CYCLE_DELAY_SHIFT) * 1000;
 	} else {
 		seq->t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
 		       PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
@@ -5367,7 +5363,7 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
 	if (IS_GEN9_LP(dev_priv) || HAS_PCH_CNP(dev_priv)) {
 		pp_div = I915_READ(regs.pp_ctrl);
 		pp_div &= ~BXT_POWER_CYCLE_DELAY_MASK;
-		pp_div |= (DIV_ROUND_UP((seq->t11_t12 + 1), 1000)
+		pp_div |= (DIV_ROUND_UP(seq->t11_t12, 1000)
 				<< BXT_POWER_CYCLE_DELAY_SHIFT);
 	} else {
 		pp_div = ((100 * div)/2 - 1) << PP_REFERENCE_DIVIDER_SHIFT;