Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...

.mailmap

@@ -127,6 +127,7 @@ Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
+Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>
 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>

Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt

+Binding for ASCII LCD displays on Imagination Technologies boards
+
+Required properties:
+- compatible : should be one of:
+    "img,boston-lcd"
+    "mti,malta-lcd"
+    "mti,sead3-lcd"
+
+Required properties for "img,boston-lcd":
+- reg : memory region locating the device registers
+
+Required properties for "mti,malta-lcd" or "mti,sead3-lcd":
+- regmap: phandle of the system controller containing the LCD registers
+- offset: offset in bytes to the LCD registers within the system controller
+
+The layout of the registers & properties of the display are determined
+from the compatible string, making this binding somewhat trivial.

Documentation/devicetree/bindings/mips/brcm/soc.txt

@@ -2,9 +2,9 @@
 
 Required properties:
 
-- compatible: "brcm,bcm3384", "brcm,bcm33843"
+- compatible: "brcm,bcm3368", "brcm,bcm3384", "brcm,bcm33843"
               "brcm,bcm3384-viper", "brcm,bcm33843-viper"
-              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6362", "brcm,bcm6368",
               "brcm,bcm63168", "brcm,bcm63268",
               "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
               "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"

Documentation/features/perf/kprobes-event/arch-support.txt

@@ -22,7 +22,7 @@
     |        m68k: | TODO |
     |       metag: | TODO |
     |  microblaze: | TODO |
-    |        mips: | TODO |
+    |        mips: |  ok  |
     |     mn10300: | TODO |
     |       nios2: | TODO |
     |    openrisc: | TODO |

MAINTAINERS

@@ -6131,6 +6131,12 @@ M:	Stanislaw Gruszka <stf_xl@wp.pl>
 S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
+IMGTEC ASCII LCD DRIVER
+M:	Paul Burton <paul.burton@imgtec.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
+F:	drivers/auxdisplay/img-ascii-lcd.c
+
 INA209 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org

arch/mips/Kbuild.platforms

@@ -11,6 +11,7 @@ platforms += cavium-octeon
 platforms += cobalt
 platforms += dec
 platforms += emma
+platforms += generic
 platforms += jazz
 platforms += jz4740
 platforms += lantiq
@@ -18,7 +19,6 @@ platforms += lasat
 platforms += loongson32
 platforms += loongson64
 platforms += mti-malta
-platforms += mti-sead3
 platforms += netlogic
 platforms += paravirt
 platforms += pic32

arch/mips/Kconfig

@@ -65,6 +65,7 @@ config MIPS
 	select HANDLE_DOMAIN_IRQ
 	select HAVE_EXIT_THREAD
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_ARCH_HARDENED_USERCOPY
 
 menu "Machine selection"
 
@@ -72,6 +73,57 @@ choice
 	prompt "System type"
 	default SGI_IP22
 
+config MIPS_GENERIC
+	bool "Generic board-agnostic MIPS kernel"
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select CLKSRC_MIPS_GIC
+	select COMMON_CLK
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_IRQ_EI
+	select CSRC_R4K
+	select DMA_PERDEV_COHERENT
+	select HW_HAS_PCI
+	select IRQ_MIPS_CPU
+	select LIBFDT
+	select MIPS_CPU_SCACHE
+	select MIPS_GIC
+	select MIPS_L1_CACHE_SHIFT_7
+	select NO_EXCEPT_FILL
+	select PCI_DRIVERS_GENERIC
+	select PINCTRL
+	select SMP_UP if SMP
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS32_R6
+	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_MIPS64_R2
+	select SYS_HAS_CPU_MIPS64_R6
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MICROMIPS
+	select SYS_SUPPORTS_MIPS_CPS
+	select SYS_SUPPORTS_MIPS16
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_SUPPORTS_RELOCATABLE
+	select SYS_SUPPORTS_SMARTMIPS
+	select USB_EHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_EHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_OHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_DESC if BIG_ENDIAN
+	select USB_UHCI_BIG_ENDIAN_MMIO if BIG_ENDIAN
+	select USE_OF
+	help
+	  Select this to build a kernel which aims to support multiple boards,
+	  generally using a flattened device tree passed from the bootloader
+	  using the boot protocol defined in the UHI (Unified Hosting
+	  Interface) specification.
+
 config MIPS_ALCHEMY
 	bool "Alchemy processor based machines"
 	select ARCH_PHYS_ADDR_T_64BIT
@@ -478,6 +530,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_ZBOOT
 	select SYS_SUPPORTS_RELOCATABLE
 	select USE_OF
+	select LIBFDT
 	select ZONE_DMA32 if 64BIT
 	select BUILTIN_DTB
 	select LIBFDT
@@ -493,42 +546,6 @@ config MACH_PIC32
 	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
 	  microcontrollers.
 
-config MIPS_SEAD3
-	bool "MIPS SEAD3 board"
-	select BOOT_ELF32
-	select BOOT_RAW
-	select BUILTIN_DTB
-	select CEVT_R4K
-	select CSRC_R4K
-	select CLKSRC_MIPS_GIC
-	select COMMON_CLK
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select DMA_NONCOHERENT
-	select IRQ_MIPS_CPU
-	select MIPS_GIC
-	select LIBFDT
-	select MIPS_MSC
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS32_R6
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_SMARTMIPS
-	select SYS_SUPPORTS_MICROMIPS
-	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_RELOCATABLE
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	select USE_OF
-	help
-	  This enables support for the MIPS Technologies SEAD3 evaluation
-	  board.
-
 config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
@@ -988,6 +1005,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/bmips/Kconfig"
+source "arch/mips/generic/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
@@ -1098,6 +1116,10 @@ config DMA_MAYBE_COHERENT
 	select DMA_NONCOHERENT
 	bool
 
+config DMA_PERDEV_COHERENT
+	bool
+	select DMA_MAYBE_COHERENT
+
 config DMA_COHERENT
 	bool
 
@@ -1401,6 +1423,16 @@ config CPU_LOONGSON1B
 	  The Loongson 1B is a 32-bit SoC, which implements the MIPS32
 	  release 2 instruction set.
 
+config CPU_LOONGSON1C
+	bool "Loongson 1C"
+	depends on SYS_HAS_CPU_LOONGSON1C
+	select CPU_LOONGSON1
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select LEDS_GPIO_REGISTER
+	help
+	  The Loongson 1C is a 32-bit SoC, which implements the MIPS32
+	  release 2 instruction set.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1850,6 +1882,9 @@ config SYS_HAS_CPU_LOONGSON2F
 config SYS_HAS_CPU_LOONGSON1B
 	bool
 
+config SYS_HAS_CPU_LOONGSON1C
+	bool
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -2906,7 +2941,7 @@ endchoice
 choice
 	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
 	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
-					 !MIPS_MALTA && !MIPS_SEAD3 && \
+					 !MIPS_MALTA && \
 					 !CAVIUM_OCTEON_SOC
 	default MIPS_CMDLINE_FROM_BOOTLOADER
 
@@ -2960,7 +2995,6 @@ config PCI
 	bool "Support for PCI controller"
 	depends on HW_HAS_PCI
 	select PCI_DOMAINS
-	select NO_GENERIC_PCI_IOPORT_MAP
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -2981,6 +3015,17 @@ config HT_PCI
 config PCI_DOMAINS
 	bool
 
+config PCI_DOMAINS_GENERIC
+	bool
+
+config PCI_DRIVERS_GENERIC
+	select PCI_DOMAINS_GENERIC if PCI_DOMAINS
+	bool
+
+config PCI_DRIVERS_LEGACY
+	def_bool !PCI_DRIVERS_GENERIC
+	select NO_GENERIC_PCI_IOPORT_MAP
+
 source "drivers/pci/Kconfig"
 
 #

arch/mips/Makefile

@@ -262,7 +262,14 @@ KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
 KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
 
 bootvars-y	= VMLINUX_LOAD_ADDRESS=$(load-y) \
-		  VMLINUX_ENTRY_ADDRESS=$(entry-y)
+		  VMLINUX_ENTRY_ADDRESS=$(entry-y) \
+		  PLATFORM=$(platform-y)
+ifdef CONFIG_32BIT
+bootvars-y	+= ADDR_BITS=32
+endif
+ifdef CONFIG_64BIT
+bootvars-y	+= ADDR_BITS=64
+endif
 
 LDFLAGS			+= -m $(ld-emul)
 
@@ -302,6 +309,11 @@ boot-y			+= uImage.gz
 boot-y			+= uImage.lzma
 boot-y			+= uImage.lzo
 endif
+boot-y			+= vmlinux.itb
+boot-y			+= vmlinux.gz.itb
+boot-y			+= vmlinux.bz2.itb
+boot-y			+= vmlinux.lzma.itb
+boot-y			+= vmlinux.lzo.itb
 
 # compressed boot image targets (arch/mips/boot/compressed/)
 bootz-y			:= vmlinuz
@@ -425,4 +437,67 @@ define archhelp
 	echo '  dtbs_install         - Install dtbs to $(INSTALL_DTBS_PATH)'
 	echo
 	echo '  These will be default as appropriate for a configured platform.'
+	echo
+	echo '  If you are targeting a system supported by generic kernels you may'
+	echo '  configure the kernel for a given architecture target like so:'
+	echo
+	echo '  {micro32,32,64}{r1,r2,r6}{el,}_defconfig <BOARDS="list of boards">'
+	echo
+	echo '  Otherwise, the following default configurations are available:'
 endef
+
+generic_config_dir = $(srctree)/arch/$(ARCH)/configs/generic
+generic_defconfigs :=
+
+#
+# If the user generates a generic kernel configuration without specifying a
+# list of boards to include the config fragments for, default to including all
+# available board config fragments.
+#
+ifeq ($(BOARDS),)
+BOARDS = $(patsubst board-%.config,%,$(notdir $(wildcard $(generic_config_dir)/board-*.config)))
+endif
+
+#
+# Generic kernel configurations which merge generic_defconfig with the
+# appropriate config fragments from arch/mips/configs/generic/, resulting in
+# the ability to easily configure the kernel for a given architecture,
+# endianness & set of boards without duplicating the needed configuration in
+# hundreds of defconfig files.
+#
+define gen_generic_defconfigs
+$(foreach bits,$(1),$(foreach rev,$(2),$(foreach endian,$(3),
+target := $(bits)$(rev)$(filter el,$(endian))_defconfig
+generic_defconfigs += $$(target)
+$$(target): $(generic_config_dir)/$(bits)$(rev).config
+$$(target): $(generic_config_dir)/$(endian).config
+)))
+endef
+
+$(eval $(call gen_generic_defconfigs,32 64,r1 r2 r6,eb el))
+$(eval $(call gen_generic_defconfigs,micro32,r2,eb el))
+
+.PHONY: $(generic_defconfigs)
+$(generic_defconfigs):
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
+		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
+		$(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
+	$(Q)$(MAKE) olddefconfig
+
+#
+# Prevent generic merge_config rules attempting to merge single fragments
+#
+$(generic_config_dir)/%.config: ;
+
+#
+# Legacy defconfig compatibility - these targets used to be real defconfigs but
+# now that the boards have been converted to use the generic kernel they are
+# wrappers around the generic rules above.
+#
+.PHONY: sead3_defconfig
+sead3_defconfig:
+	$(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
+
+.PHONY: sead3micro_defconfig
+sead3micro_defconfig:
+	$(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3

arch/mips/alchemy/common/setup.c

@@ -48,17 +48,17 @@ void __init plat_mem_setup(void)
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
 	hw_coherentio = 0;
-	coherentio = 1;
+	coherentio = IO_COHERENCE_ENABLED;
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1000:
 	case ALCHEMY_CPU_AU1500:
 	case ALCHEMY_CPU_AU1100:
-		coherentio = 0;
+		coherentio = IO_COHERENCE_DISABLED;
 		break;
 	case ALCHEMY_CPU_AU1200:
 		/* Au1200 AB USB does not support coherent memory */
 		if (0 == (read_c0_prid() & PRID_REV_MASK))
-			coherentio = 0;
+			coherentio = IO_COHERENCE_DISABLED;
 		break;
 	}
 

arch/mips/bcm47xx/serial.c

 /*
+ * 8250 UART probe driver for the BCM47XX platforms
+ * Author: Aurelien Jarno
+ *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -6,7 +9,6 @@
  * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
  */
 
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
@@ -88,9 +90,4 @@ static int __init uart8250_init(void)
 	}
 	return -EINVAL;
 }
-
-module_init(uart8250_init);
-
-MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the BCM47XX platforms");
+device_initcall(uart8250_init);

arch/mips/bcm63xx/clk.c

@@ -326,6 +326,9 @@ EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
+	if (!clk)
+		return;
+
 	mutex_lock(&clocks_mutex);
 	clk_disable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);

arch/mips/bmips/Kconfig

@@ -21,10 +21,6 @@ config DT_BCM93384WVG_VIPER
 	bool "BCM93384WVG Viper CPU (EXPERIMENTAL)"
 	select BUILTIN_DTB
 
-config DT_BCM96358NB4SER
-	bool "BCM96358NB4SER"
-	select BUILTIN_DTB
-
 config DT_BCM96368MVWG
 	bool "BCM96368MVWG"
 	select BUILTIN_DTB
@@ -65,6 +61,22 @@ config DT_BCM97435SVMB
 	bool "BCM97435SVMB"
 	select BUILTIN_DTB
 
+config DT_COMTREND_VR3032U
+	bool "Comtrend VR-3032u"
+	select BUILTIN_DTB
+
+config DT_NETGEAR_CVG834G
+	bool "NETGEAR CVG834G"
+	select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX4_SERCOMM
+	bool "SFR Neufbox 4 (Sercomm)"
+	select BUILTIN_DTB
+
+config DT_SFR_NEUFBOX6_SERCOMM
+	bool "SFR Neufbox 6 (Sercomm)"
+	select BUILTIN_DTB
+
 endchoice
 
 endif

arch/mips/bmips/setup.c

@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
+#include <linux/libfdt.h>
 #include <linux/smp.h>
 #include <asm/addrspace.h>
 #include <asm/bmips.h>
@@ -98,7 +99,7 @@ static void bcm6328_quirks(void)
 static void bcm6358_quirks(void)
 {
 	/*
-	 * BCM6358 needs special handling for its shared TLB, so
+	 * BCM3368/BCM6358 need special handling for their shared TLB, so
 	 * disable SMP for now
 	 */
 	bmips_smp_enabled = 0;
@@ -110,10 +111,12 @@ static void bcm6368_quirks(void)
 }
 
 static const struct bmips_quirk bmips_quirk_list[] = {
+	{ "brcm,bcm3368",		&bcm6358_quirks			},
 	{ "brcm,bcm3384-viper",		&bcm3384_viper_quirks		},
 	{ "brcm,bcm33843-viper",	&bcm3384_viper_quirks		},
 	{ "brcm,bcm6328",		&bcm6328_quirks			},
 	{ "brcm,bcm6358",		&bcm6358_quirks			},
+	{ "brcm,bcm6362",		&bcm6368_quirks			},
 	{ "brcm,bcm6368",		&bcm6368_quirks			},
 	{ "brcm,bcm63168",		&bcm6368_quirks			},
 	{ "brcm,bcm63268",		&bcm6368_quirks			},
@@ -150,6 +153,8 @@ void __init plat_time_init(void)
 	mips_hpt_frequency = freq;
 }
 
+extern const char __appended_dtb;
+
 void __init plat_mem_setup(void)
 {
 	void *dtb;
@@ -159,6 +164,11 @@ void __init plat_mem_setup(void)
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+	if (!fdt_check_header(&__appended_dtb))
+		dtb = (void *)&__appended_dtb;
+	else
+#endif
 	/* intended to somewhat resemble ARM; see Documentation/arm/Booting */
 	if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
 		dtb = phys_to_virt(fw_arg2);

arch/mips/boot/Makefile

@@ -100,3 +100,69 @@ $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
 $(obj)/uImage: $(obj)/uImage.$(suffix-y)
 	@ln -sf $(notdir $<) $@
 	@echo '  Image $@ is ready'
+
+#
+# Flattened Image Tree (.itb) images
+#
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
+
+ifeq ($(ADDR_BITS),32)
+	itb_addr_cells = 1
+endif
+ifeq ($(ADDR_BITS),64)
+	itb_addr_cells = 2
+endif
+
+quiet_cmd_cpp_its_S = ITS     $@
+      cmd_cpp_its_S = $(CPP) $(cpp_flags) -P -C -o $@ $< \
+		        -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
+			-DVMLINUX_BINARY="\"$(3)\"" \
+			-DVMLINUX_COMPRESSION="\"$(2)\"" \
+			-DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
+			-DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
+			-DADDR_BITS=$(ADDR_BITS) \
+			-DADDR_CELLS=$(itb_addr_cells)
+
+$(obj)/vmlinux.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,none,vmlinux.bin)
+
+$(obj)/vmlinux.gz.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,gzip,vmlinux.bin.gz)
+
+$(obj)/vmlinux.bz2.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,bzip2,vmlinux.bin.bz2)
+
+$(obj)/vmlinux.lzma.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,lzma,vmlinux.bin.lzma)
+
+$(obj)/vmlinux.lzo.its: $(srctree)/arch/mips/$(PLATFORM)/vmlinux.its.S FORCE
+	$(call if_changed_dep,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+quiet_cmd_itb-image = ITB     $@
+      cmd_itb-image = \
+		env PATH="$(objtree)/scripts/dtc:$(PATH)" \
+		$(CONFIG_SHELL) $(MKIMAGE) \
+		-D "-I dts -O dtb -p 500 \
+			--include $(objtree)/arch/mips \
+			--warning no-unit_address_vs_reg" \
+		-f $(2) $@
+
+$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.gz.itb: $(obj)/vmlinux.gz.its $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.bz2.itb: $(obj)/vmlinux.bz2.its $(obj)/vmlinux.bin.bz2 FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzma.itb: $(obj)/vmlinux.lzma.its $(obj)/vmlinux.bin.lzma FORCE
+	$(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.lzo.itb: $(obj)/vmlinux.lzo.its $(obj)/vmlinux.bin.lzo FORCE
+	$(call if_changed,itb-image,$<)

arch/mips/boot/dts/brcm/Makefile

 dtb-$(CONFIG_DT_BCM93384WVG)		+= bcm93384wvg.dtb
 dtb-$(CONFIG_DT_BCM93384WVG_VIPER)	+= bcm93384wvg_viper.dtb
-dtb-$(CONFIG_DT_BCM96358NB4SER)		+= bcm96358nb4ser.dtb
 dtb-$(CONFIG_DT_BCM96368MVWG)		+= bcm96368mvwg.dtb
 dtb-$(CONFIG_DT_BCM9EJTAGPRB)		+= bcm9ejtagprb.dtb
 dtb-$(CONFIG_DT_BCM97125CBMB)		+= bcm97125cbmb.dtb
@@ -11,20 +10,29 @@ dtb-$(CONFIG_DT_BCM97362SVMB)		+= bcm97362svmb.dtb
 dtb-$(CONFIG_DT_BCM97420C)		+= bcm97420c.dtb
 dtb-$(CONFIG_DT_BCM97425SVMB)		+= bcm97425svmb.dtb
 dtb-$(CONFIG_DT_BCM97435SVMB)		+= bcm97435svmb.dtb
+dtb-$(CONFIG_DT_COMTREND_VR3032U)	+= bcm63268-comtrend-vr-3032u.dtb
+dtb-$(CONFIG_DT_NETGEAR_CVG834G)	+= bcm3368-netgear-cvg834g.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX4_SERCOMM)	+= bcm6358-neufbox4-sercomm.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX6_SERCOMM)	+= bcm6362-neufbox6-sercomm.dtb
 
-dtb-$(CONFIG_DT_NONE)			+= \
-						bcm93384wvg.dtb		\
-						bcm93384wvg_viper.dtb	\
-						bcm96358nb4ser.dtb	\
-						bcm96368mvwg.dtb	\
-						bcm9ejtagprb.dtb	\
-						bcm97125cbmb.dtb	\
-						bcm97346dbsmb.dtb	\
-						bcm97358svmb.dtb	\
-						bcm97360svmb.dtb	\
-						bcm97362svmb.dtb	\
-						bcm97420c.dtb		\
-						bcm97425svmb.dtb
+dtb-$(CONFIG_DT_NONE) += \
+	bcm3368-netgear-cvg834g.dtb \
+	bcm6358-neufbox4-sercomm.dtb \
+	bcm6362-neufbox6-sercomm.dtb \
+	bcm63268-comtrend-vr-3032u.dtb \
+	bcm93384wvg.dtb \
+	bcm93384wvg_viper.dtb \
+	bcm96358nb4ser.dtb \
+	bcm96368mvwg.dtb \
+	bcm9ejtagprb.dtb \
+	bcm97125cbmb.dtb \
+	bcm97346dbsmb.dtb \
+	bcm97358svmb.dtb \
+	bcm97360svmb.dtb \
+	bcm97362svmb.dtb \
+	bcm97420c.dtb \
+	bcm97425svmb.dtb \
+	bcm97435svmb.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 

arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts

+/dts-v1/;
+
+/include/ "bcm3368.dtsi"
+
+/ {
+	compatible = "netgear,cvg834g", "brcm,bcm3368";
+	model = "NETGEAR CVG834G";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm3368.dtsi

+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm3368";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <150000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@fff8c000 {
+			compatible = "syscon";
+			reg = <0xfff8c000 0xc>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@fff8c008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@fff8c00c {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0xfff8c00c 0x8>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>;
+		};
+
+		uart0: serial@fff8c100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <2>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@fff8c120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0xfff8c120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+	};
+};

arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts

+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+	compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+	model = "Comtrend VR-3032u";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&leds0 {
+	status = "ok";
+	brcm,serial-leds;
+	brcm,serial-dat-low;
+	brcm,serial-shift-inv;
+
+	led@0 {
+		reg = <0>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <0>;
+		/* GPHY0 Speed 0 */
+	};
+	led@1 {
+		reg = <1>;
+		brcm,hardware-controlled;
+		brcm,link-signal-sources = <1>;
+		/* GPHY0 Speed 1 */
+	};
+	led@2 {
+		reg = <2>;
+		active-low;
+		label = "vr-3032u:red:inet";
+	};
+	led@3 {
+		reg = <3>;
+		active-low;
+		label = "vr-3032u:green:dsl";
+	};
+	led@4 {
+		reg = <4>;
+		active-low;
+		label = "vr-3032u:green:usb";
+	};
+	led@7 {
+		reg = <7>;
+		active-low;
+		label = "vr-3032u:green:wps";
+	};
+	led@8 {
+		reg = <8>;
+		active-low;
+		label = "vr-3032u:green:inet";
+	};
+	led@9 {
+		reg = <9>;
+		brcm,hardware-controlled;
+		/* EPHY0 Activity */
+	};
+	led@10 {
+		reg = <10>;
+		brcm,hardware-controlled;
+		/* EPHY1 Activity */
+	};
+	led@11 {
+		reg = <11>;
+		brcm,hardware-controlled;
+		/* EPHY2 Activity */
+	};
+	led@12 {
+		reg = <12>;
+		brcm,hardware-controlled;
+		/* GPHY0 Activity */
+	};
+	led@13 {
+		reg = <13>;
+		brcm,hardware-controlled;
+		/* EPHY0 Speed */
+	};
+	led@14 {
+		reg = <14>;
+		brcm,hardware-controlled;
+		/* EPHY1 Speed */
+	};
+	led@15 {
+		reg = <15>;
+		brcm,hardware-controlled;
+		/* EPHY2 Speed */
+	};
+	led@20 {
+		reg = <20>;
+		active-low;
+		label = "vr-3032u:green:power";
+		default-state = "on";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm63268.dtsi

+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63268";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x20>,
+			      <0x10000040 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000180 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000180 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <5>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@100001a0 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x100001a0 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <34>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm63268-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm63268-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};

arch/mips/boot/dts/brcm/bcm96358nb4ser.dts → arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts

@@ -12,6 +12,7 @@ memory@0 {
 	};
 
 	chosen {
+		bootargs = "console=ttyS0,115200";
 		stdout-path = &uart0;
 	};
 };

arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts

+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+	compatible = "sfr,nb6-ser", "brcm,bcm6362";
+	model = "SFR NeufBox 6 (Sercomm)";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm6362.dtsi

+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm6362";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mips-hpt-frequency = <200000000>;
+
+		cpu@0 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,bmips4350";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	cpu_intc: interrupt-controller {
+		#address-cells = <0>;
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	ubus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		compatible = "simple-bus";
+		ranges;
+
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
+		periph_intc: interrupt-controller@10000020 {
+			compatible = "brcm,bcm6345-l1-intc";
+			reg = <0x10000020 0x10>,
+			      <0x10000030 0x10>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&cpu_intc>;
+			interrupts = <2>, <3>;
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <3>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@10000120 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000120 0x18>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <4>;
+
+			clocks = <&periph_clk>;
+
+			status = "disabled";
+		};
+
+		leds0: led-controller@10001900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10001900 0x24>;
+
+			status = "disabled";
+		};
+
+		ehci: usb@10002500 {
+			compatible = "brcm,bcm6362-ehci", "generic-ehci";
+			reg = <0x10002500 0x100>;
+			big-endian;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <10>;
+
+			status = "disabled";
+		};
+
+		ohci: usb@10002600 {
+			compatible = "brcm,bcm6362-ohci", "generic-ohci";
+			reg = <0x10002600 0x100>;
+			big-endian;
+			no-big-frame-no;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <9>;
+
+			status = "disabled";
+		};
+	};
+};

arch/mips/boot/dts/brcm/bcm7125.dtsi

@@ -26,7 +26,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@ periph_intc: periph_intc@441400 {
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@ gisb-arb@400000 {
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -183,6 +189,26 @@ bscd: i2c@406380 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 18>;
+		};
+
 		ehci0: usb@488300 {
 			compatible = "brcm,bcm7125-ehci", "generic-ehci";
 			reg = <0x488300 0x100>;

arch/mips/boot/dts/brcm/bcm7346.dtsi

@@ -26,7 +26,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@ periph_intc: periph_intc@411400 {
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@ gisb-arb@400000 {
 						     "jtag_0", "svd_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -96,7 +102,7 @@ upg_irq0_intc: upg_irq0_intc@406780 {
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -210,6 +216,59 @@ bsce: i2c@408980 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <53>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 16>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <27 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -313,6 +372,26 @@ ohci3: usb@490600 {
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -352,5 +431,13 @@ sata_phy1: sata-phy@1 {
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@413500 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x413500 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <85>;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7358.dtsi

@@ -20,7 +20,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@ periph_intc: periph_intc@411400 {
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@ gisb-arb@400000 {
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@ upg_irq0_intc: upg_irq0_intc@406600 {
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,59 @@ bscd: i2c@408980 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406700 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406700 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408240 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408240 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -239,5 +298,25 @@ ohci0: usb@480400 {
 			interrupts = <66>;
 			status = "disabled";
 		};
+
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7360.dtsi

@@ -20,7 +20,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -34,6 +34,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -43,7 +49,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>;
 
@@ -54,7 +60,7 @@ periph_intc: periph_intc@411400 {
 			interrupts = <2>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -75,7 +81,7 @@ gisb-arb@400000 {
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -90,7 +96,7 @@ upg_irq0_intc: upg_irq0_intc@406600 {
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -194,6 +200,51 @@ bscd: i2c@408980 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -240,6 +291,26 @@ ohci0: usb@480400 {
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -279,5 +350,13 @@ sata_phy1: sata-phy@1 {
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7362.dtsi

@@ -26,7 +26,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@411400 {
+		periph_intc: interrupt-controller@411400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x411400 0x30>, <0x411600 0x30>;
 
@@ -60,7 +66,7 @@ periph_intc: periph_intc@411400 {
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -81,7 +87,7 @@ gisb-arb@400000 {
 						     "avd_0", "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406600 {
+		upg_irq0_intc: interrupt-controller@406600 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
@@ -96,7 +102,7 @@ upg_irq0_intc: upg_irq0_intc@406600 {
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+		upg_aon_irq0_intc: interrupt-controller@408b80 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x408b80 0x8>;
 
@@ -190,6 +196,51 @@ bscd: i2c@408980 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406400 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406400 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -236,6 +287,26 @@ ohci0: usb@480400 {
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@411000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x411000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <30>;
+		};
+
+		nand: nand@412800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x412800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -275,5 +346,13 @@ sata_phy1: sata-phy@1 {
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@410000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x410000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <82>;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7420.dtsi

@@ -26,7 +26,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@441400 {
+		periph_intc: interrupt-controller@441400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x441400 0x30>, <0x441600 0x30>;
 
@@ -60,7 +66,7 @@ periph_intc: periph_intc@441400 {
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@401800 {
+		sun_l2_intc: interrupt-controller@401800 {
 			compatible = "brcm,l2-intc";
 			reg = <0x401800 0x30>;
 			interrupt-controller;
@@ -82,7 +88,7 @@ gisb-arb@400000 {
 						     "jtag_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -191,6 +197,34 @@ bsce: i2c@406800 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406880 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406880 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 27>;
+		};
+
 		enet0: ethernet@468000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7425.dtsi

@@ -26,7 +26,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -40,6 +40,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -49,7 +55,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41a400 {
+		periph_intc: interrupt-controller@41a400 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41a400 0x30>, <0x41a600 0x30>;
 
@@ -60,7 +66,7 @@ periph_intc: periph_intc@41a400 {
 			interrupts = <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -83,7 +89,7 @@ gisb-arb@400000 {
 						     "vice_0";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -98,7 +104,7 @@ upg_irq0_intc: upg_irq0_intc@406780 {
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -209,6 +215,59 @@ bsce: i2c@406300 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <49>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -312,6 +371,26 @@ ohci3: usb@490600 {
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41a000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41a000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41b800 {
+			compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand";
+			reg = <0x41b800 0x400>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -351,5 +430,25 @@ sata_phy1: sata-phy@1 {
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@419000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <43>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@419200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x419200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <44>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -38,7 +38,7 @@ aliases {
 		uart0 = &uart0;
 	};
 
-	cpu_intc: cpu_intc {
+	cpu_intc: interrupt-controller {
 		#address-cells = <0>;
 		compatible = "mti,cpu-interrupt-controller";
 
@@ -52,6 +52,12 @@ uart_clk: uart_clk {
 			#clock-cells = <0>;
 			clock-frequency = <81000000>;
 		};
+
+		upg_clk: upg_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
 	};
 
 	rdb {
@@ -61,7 +67,7 @@ rdb {
 		compatible = "simple-bus";
 		ranges = <0 0x10000000 0x01000000>;
 
-		periph_intc: periph_intc@41b500 {
+		periph_intc: interrupt-controller@41b500 {
 			compatible = "brcm,bcm7038-l1-intc";
 			reg = <0x41b500 0x40>, <0x41b600 0x40>,
 				<0x41b700 0x40>, <0x41b800 0x40>;
@@ -73,7 +79,7 @@ periph_intc: periph_intc@41b500 {
 			interrupts = <2>, <3>, <2>, <3>;
 		};
 
-		sun_l2_intc: sun_l2_intc@403000 {
+		sun_l2_intc: interrupt-controller@403000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x403000 0x30>;
 			interrupt-controller;
@@ -98,7 +104,7 @@ gisb-arb@400000 {
 						     "scpu";
 		};
 
-		upg_irq0_intc: upg_irq0_intc@406780 {
+		upg_irq0_intc: interrupt-controller@406780 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
@@ -113,7 +119,7 @@ upg_irq0_intc: upg_irq0_intc@406780 {
 			interrupt-names = "upg_main", "upg_bsc";
 		};
 
-		upg_aon_irq0_intc: upg_aon_irq0_intc@409480 {
+		upg_aon_irq0_intc: interrupt-controller@409480 {
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x409480 0x8>;
 
@@ -224,6 +230,59 @@ bsce: i2c@409180 {
 		      status = "disabled";
 		};
 
+		pwma: pwm@406580 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406580 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		pwmb: pwm@406800 {
+			compatible = "brcm,bcm7038-pwm";
+			reg = <0x406800 0x28>;
+			#pwm-cells = <2>;
+			clocks = <&upg_clk>;
+			status = "disabled";
+		};
+
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <54>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -327,6 +386,26 @@ ohci3: usb@490600 {
 			status = "disabled";
 		};
 
+		hif_l2_intc: interrupt-controller@41b000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x41b000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <24>;
+		};
+
+		nand: nand@41c800 {
+			compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg-names = "nand", "flash-dma";
+			reg = <0x41c800 0x600>, <0x41d000 0x100>;
+			interrupt-parent = <&hif_l2_intc>;
+			interrupts = <24>, <4>;
+			status = "disabled";
+		};
+
 		sata: sata@181000 {
 			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
 			reg-names = "ahci", "top-ctrl";
@@ -366,5 +445,25 @@ sata_phy1: sata-phy@1 {
 				#phy-cells = <0>;
 			};
 		};
+
+		sdhci0: sdhci@41a000 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a000 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <47>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@41a200 {
+			compatible = "brcm,bcm7425-sdhci";
+			reg = <0x41a200 0x100>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <48>;
+			sd-uhs-sdr50;
+			mmc-hs200-1_8v;
+			status = "disabled";
+		};
 	};
 };

arch/mips/boot/dts/brcm/bcm97125cbmb.dts

@@ -45,6 +45,10 @@ &bscd {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 /* FIXME: USB is wonky; disable it for now */
 &ehci0 {
 	status = "disabled";

arch/mips/boot/dts/brcm/bcm97346dbsmb.dts

 /dts-v1/;
 
 /include/ "bcm7346.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
@@ -49,6 +50,14 @@ &bsce {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -85,6 +94,10 @@ &ohci3 {
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -92,3 +105,7 @@ &sata {
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97358svmb.dts

 /dts-v1/;
 
 /include/ "bcm7358.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
@@ -45,6 +46,14 @@ &bscd {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -56,3 +65,7 @@ &ehci0 {
 &ohci0 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97360svmb.dts

@@ -45,6 +45,10 @@ &bscd {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -64,3 +68,7 @@ &sata {
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97362svmb.dts

 /dts-v1/;
 
 /include/ "bcm7362.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
 
 / {
 	compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
@@ -41,6 +42,10 @@ &bscd {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -53,6 +58,10 @@ &ohci0 {
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -60,3 +69,7 @@ &sata {
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97420c.dts

@@ -51,6 +51,14 @@ &bsce {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 /* FIXME: MAC driver comes up but cannot attach to PHY */
 &enet0 {
 	status = "disabled";

arch/mips/boot/dts/brcm/bcm97425svmb.dts

 /dts-v1/;
 
 /include/ "bcm7425.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
@@ -51,6 +52,14 @@ &bsce {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -86,3 +95,15 @@ &ehci3 {
 &ohci3 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97435svmb.dts

 /dts-v1/;
 
 /include/ "bcm7435.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
 
 / {
 	compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
@@ -51,6 +52,14 @@ &bsce {
 	status = "okay";
 };
 
+&pwma {
+	status = "okay";
+};
+
+&pwmb {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -87,6 +96,10 @@ &ohci3 {
 	status = "okay";
 };
 
+&nand {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
@@ -94,3 +107,11 @@ &sata {
 &sata_phy {
 	status = "okay";
 };
+
+&sdhci0 {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+};

arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi

+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+		brcm,nand-oob-sector-size = <27>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};

arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi

+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-on-flash-bbt;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sector-size = <16>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1.rootfs@0 {
+				reg = <0x0 0x10000000>;
+			};
+
+			flash1.kernel@10000000 {
+				reg = <0x10000000 0x400000>;
+			};
+		};
+	};
+};

arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts

@@ -8,55 +8,16 @@
  * published by the Free Software Foundation.
  */
 
-/include/ "octeon_3xxx.dtsi"
+/include/ "dlink_dsr-500n-1000n.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "dlink,dsr-1000n";
 
 	soc@0 {
-		smi0: mdio@1180000001800 {
-			phy8: ethernet-phy@8 {
-				reg = <8>;
-				compatible = "ethernet-phy-ieee802.3-c22";
-			};
-		};
-
-		pip: pip@11800a0000000 {
-			interface@0 {
-				ethernet@0 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@1 {
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-				ethernet@2 {
-					phy-handle = <&phy8>;
-				};
-			};
-		};
-
-		twsi0: i2c@1180000001000 {
-			rtc@68 {
-				compatible = "dallas,ds1337";
-				reg = <0x68>;
-			};
-		};
-
 		uart0: serial@1180000000800 {
 			clock-frequency = <500000000>;
 		};
-
-		usbn: usbn@1180068000000 {
-			refclk-frequency = <12000000>;
-			refclk-type = "crystal";
-		};
 	};
 
 	leds {
@@ -87,8 +48,4 @@ wireless2 {
 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	aliases {
-		pip = &pip;
-	};
 };

arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi

+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+	soc@0 {
+		smi0: mdio@1180000001800 {
+			phy8: ethernet-phy@8 {
+				reg = <8>;
+				compatible = "ethernet-phy-ieee802.3-c22";
+			};
+		};
+
+		pip: pip@11800a0000000 {
+			interface@0 {
+				ethernet@0 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@1 {
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+				ethernet@2 {
+					phy-handle = <&phy8>;
+				};
+			};
+		};
+
+		twsi0: i2c@1180000001000 {
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		usbn: usbn@1180068000000 {
+			refclk-frequency = <12000000>;
+			refclk-type = "crystal";
+		};
+	};
+
+	aliases {
+		pip = &pip;
+	};
+};

arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts

+/*
+ * Device tree source for D-Link DSR-500N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "dlink,dsr-500n";
+	compatible = "dlink,dsr-500n", "cavium,octeon-3860";
+
+	soc@0 {
+		uart0: serial@1180000000800 {
+			clock-frequency = <300000000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wireless {
+			label = "2.4g";
+			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/mips/boot/dts/mti/Makefile

 dtb-$(CONFIG_MIPS_MALTA)	+= malta.dtb
-dtb-$(CONFIG_MIPS_SEAD3)	+= sead3.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3)	+= sead3.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
 

arch/mips/boot/dts/mti/malta.dts

 /dts-v1/;
 
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 /memreserve/ 0x00000000 0x00001000;	/* YAMON exception vectors */
 /memreserve/ 0x00001000 0x000ef000;	/* YAMON */
 /memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
@@ -8,4 +11,100 @@ / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,malta";
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	i8259: interrupt-controller@20 {
+		compatible = "intel,i8259";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	flash@1e000000 {
+		compatible = "intel,dt28f160", "cfi-flash";
+		reg = <0x1e000000 0x400000>;
+		bank-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			yamon@0 {
+				label = "YAMON";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			user-fs@100000 {
+				label = "User FS";
+				reg = <0x100000 0x2e0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x3e0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x1000>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x500>;
+			mask = <0x4d>;
+		};
+	};
+
+	isa {
+		compatible = "isa";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0 0x1000>;
+
+		rtc@70 {
+			compatible = "motorola,mc146818";
+			reg = <1 0x70 0x8>;
+
+			interrupt-parent = <&i8259>;
+			interrupts = <8>;
+		};
+	};
 };

arch/mips/boot/dts/mti/sead3.dts

@@ -4,10 +4,23 @@
 /memreserve/ 0x00001000 0x000ef000;	// ROM data
 /memreserve/ 0x000f0000 0x004cc000;	// reserved
 
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "mti,sead-3";
+	model = "MIPS SEAD-3";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		stdout-path = "uart1:115200";
+	};
+
+	aliases {
+		uart0 = &uart0;
+		uart1 = &uart1;
+	};
 
 	cpus {
 		cpu@0 {
@@ -19,4 +32,229 @@ memory {
 		device_type = "memory";
 		reg = <0x0 0x08000000>;
 	};
+
+	cpu_intc: interrupt-controller {
+		compatible = "mti,cpu-interrupt-controller";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	gic: interrupt-controller@1b1c0000 {
+		compatible = "mti,gic";
+		reg = <0x1b1c0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		/*
+		 * Declare the interrupt-parent even though the mti,gic
+		 * binding doesn't require it, such that the kernel can
+		 * figure out that cpu_intc is the root interrupt
+		 * controller & should be probed first.
+		 */
+		interrupt-parent = <&cpu_intc>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+		};
+	};
+
+	ehci@1b200000 {
+		compatible = "generic-ehci";
+		reg = <0x1b200000 0x1000>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		has-transaction-translator;
+	};
+
+	flash@1c000000 {
+		compatible = "intel,28f128j3", "cfi-flash";
+		reg = <0x1c000000 0x2000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			user-fs@0 {
+				label = "User FS";
+				reg = <0x0 0x1fc0000>;
+			};
+
+			board-config@3e0000 {
+				label = "Board Config";
+				reg = <0x1fc0000 0x40000>;
+			};
+		};
+	};
+
+	fpga_regs: system-controller@1f000000 {
+		compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
+		reg = <0x1f000000 0x200>;
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&fpga_regs>;
+			offset = <0x50>;
+			mask = <0x4d>;
+		};
+
+		poweroff {
+			compatible = "restart-poweroff";
+		};
+	};
+
+	system-controller@1f000200 {
+		compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+		reg = <0x1f000200 0x300>;
+
+		led@10.0 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x1>;
+			label = "pled0";
+		};
+		led@10.1 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x2>;
+			label = "pled1";
+		};
+		led@10.2 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x4>;
+			label = "pled2";
+		};
+		led@10.3 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x8>;
+			label = "pled3";
+		};
+		led@10.4 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x10>;
+			label = "pled4";
+		};
+		led@10.5 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x20>;
+			label = "pled5";
+		};
+		led@10.6 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x40>;
+			label = "pled6";
+		};
+		led@10.7 {
+			compatible = "register-bit-led";
+			offset = <0x10>;
+			mask = <0x80>;
+			label = "pled7";
+		};
+
+		led@18.0 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x1>;
+			label = "fled0";
+		};
+		led@18.1 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x2>;
+			label = "fled1";
+		};
+		led@18.2 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x4>;
+			label = "fled2";
+		};
+		led@18.3 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x8>;
+			label = "fled3";
+		};
+		led@18.4 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x10>;
+			label = "fled4";
+		};
+		led@18.5 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x20>;
+			label = "fled5";
+		};
+		led@18.6 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x40>;
+			label = "fled6";
+		};
+		led@18.7 {
+			compatible = "register-bit-led";
+			offset = <0x18>;
+			mask = <0x80>;
+			label = "fled7";
+		};
+
+		lcd@200 {
+			compatible = "mti,sead3-lcd";
+			offset = <0x200>;
+		};
+	};
+
+	/* UART connected to FTDI & miniUSB socket */
+	uart0: uart@1f000900 {
+		compatible = "ns16550a";
+		reg = <0x1f000900 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <3>; /* GIC 3 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	/* UART connected to RS232 socket */
+	uart1: uart@1f000800 {
+		compatible = "ns16550a";
+		reg = <0x1f000800 0x20>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+
+		clock-frequency = <14745600>;
+
+		interrupts = <2>; /* GIC 2 or CPU 4 */
+
+		no-loopback-test;
+	};
+
+	eth@1f010000 {
+		compatible = "smsc,lan9115";
+		reg = <0x1f010000 0x10000>;
+		reg-io-width = <4>;
+
+		interrupts = <0>; /* GIC 0 or CPU 6 */
+
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+	};
 };

arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c

@@ -33,8 +33,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-
-#include <asm/octeon/cvmx-mdio.h>
 #include <asm/octeon/cvmx-pko.h>
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-board.h>
@@ -243,8 +241,7 @@ int __cvmx_helper_rgmii_enable(int interface)
 	/* enable the ports now */
 	for (port = 0; port < num_ports; port++) {
 		union cvmx_gmxx_prtx_cfg gmx_cfg;
-		cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port
-					  (interface, port));
+
 		gmx_cfg.u64 =
 		    cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface));
 		gmx_cfg.s.en = 1;

arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c

@@ -34,7 +34,6 @@
 
 #include <asm/octeon/cvmx-config.h>
 
-#include <asm/octeon/cvmx-mdio.h>
 #include <asm/octeon/cvmx-helper.h>
 #include <asm/octeon/cvmx-helper-board.h>
 

arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c

@@ -234,8 +234,6 @@ int __cvmx_helper_xaui_enable(int interface)
 	cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64);
 	cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64);
 
-	cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, 0));
-
 	/* (8) Enable packet reception */
 	xauiMiscCtl.s.gmxeno = 0;
 	cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -841,7 +841,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 	int retry_cnt;
 	int retry_loop_cnt;
 	int i;
-	cvmx_helper_link_info_t link_info;
 
 	/* Save values for restore at end */
 	uint64_t prtx_cfg =
@@ -1002,15 +1001,6 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 		       (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)),
 		       frame_max);
 	cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0);
-	/* Set link to down so autonegotiation will set it up again */
-	link_info.u64 = 0;
-	cvmx_helper_link_set(FIX_IPD_OUTPORT, link_info);
-
-	/*
-	 * Bring the link back up as autonegotiation is not done in
-	 * user applications.
-	 */
-	cvmx_helper_link_autoconf(FIX_IPD_OUTPORT);
 
 	CVMX_SYNC;
 	if (num_segs)

arch/mips/cavium-octeon/setup.c

@@ -65,7 +65,8 @@ EXPORT_SYMBOL(octeon_should_swizzle_table);
 extern void pci_console_init(const char *arg);
 #endif
 
-static unsigned long long MAX_MEMORY = 512ull << 20;
+static unsigned long long max_memory = ULLONG_MAX;
+static unsigned long long reserve_low_mem;
 
 DEFINE_SEMAPHORE(octeon_bootbus_sem);
 EXPORT_SYMBOL(octeon_bootbus_sem);
@@ -75,7 +76,6 @@ struct octeon_boot_descriptor *octeon_boot_desc_ptr;
 struct cvmx_bootinfo *octeon_bootinfo;
 EXPORT_SYMBOL(octeon_bootinfo);
 
-static unsigned long long RESERVE_LOW_MEM = 0ull;
 #ifdef CONFIG_KEXEC
 #ifdef CONFIG_SMP
 /*
@@ -125,18 +125,18 @@ static void kexec_bootmem_init(uint64_t mem_size, uint32_t low_reserved_bytes)
 	bootmem_desc->major_version = CVMX_BOOTMEM_DESC_MAJ_VER;
 	bootmem_desc->minor_version = CVMX_BOOTMEM_DESC_MIN_VER;
 
-	addr = (OCTEON_DDR0_BASE + RESERVE_LOW_MEM + low_reserved_bytes);
+	addr = (OCTEON_DDR0_BASE + reserve_low_mem + low_reserved_bytes);
 	bootmem_desc->head_addr = 0;
 
 	if (mem_size <= OCTEON_DDR0_SIZE) {
 		__cvmx_bootmem_phy_free(addr,
-				mem_size - RESERVE_LOW_MEM -
+				mem_size - reserve_low_mem -
 				low_reserved_bytes, 0);
 		return;
 	}
 
 	__cvmx_bootmem_phy_free(addr,
-			OCTEON_DDR0_SIZE - RESERVE_LOW_MEM -
+			OCTEON_DDR0_SIZE - reserve_low_mem -
 			low_reserved_bytes, 0);
 
 	mem_size -= OCTEON_DDR0_SIZE;
@@ -857,15 +857,15 @@ void __init prom_init(void)
 
 	/* Default to 64MB in the simulator to speed things up */
 	if (octeon_is_simulation())
-		MAX_MEMORY = 64ull << 20;
+		max_memory = 64ull << 20;
 
 	arg = strstr(arcs_cmdline, "mem=");
 	if (arg) {
-		MAX_MEMORY = memparse(arg + 4, &p);
-		if (MAX_MEMORY == 0)
-			MAX_MEMORY = 32ull << 30;
+		max_memory = memparse(arg + 4, &p);
+		if (max_memory == 0)
+			max_memory = 32ull << 30;
 		if (*p == '@')
-			RESERVE_LOW_MEM = memparse(p + 1, &p);
+			reserve_low_mem = memparse(p + 1, &p);
 	}
 
 	arcs_cmdline[0] = 0;
@@ -875,11 +875,11 @@ void __init prom_init(void)
 			cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
 		if ((strncmp(arg, "MEM=", 4) == 0) ||
 		    (strncmp(arg, "mem=", 4) == 0)) {
-			MAX_MEMORY = memparse(arg + 4, &p);
-			if (MAX_MEMORY == 0)
-				MAX_MEMORY = 32ull << 30;
+			max_memory = memparse(arg + 4, &p);
+			if (max_memory == 0)
+				max_memory = 32ull << 30;
 			if (*p == '@')
-				RESERVE_LOW_MEM = memparse(p + 1, &p);
+				reserve_low_mem = memparse(p + 1, &p);
 #ifdef CONFIG_KEXEC
 		} else if (strncmp(arg, "crashkernel=", 12) == 0) {
 			crashk_size = memparse(arg+12, &p);
@@ -971,13 +971,13 @@ void __init plat_mem_setup(void)
 	 * to consistently work.
 	 */
 	mem_alloc_size = 4 << 20;
-	if (mem_alloc_size > MAX_MEMORY)
-		mem_alloc_size = MAX_MEMORY;
+	if (mem_alloc_size > max_memory)
+		mem_alloc_size = max_memory;
 
 /* Crashkernel ignores bootmem list. It relies on mem=X@Y option */
 #ifdef CONFIG_CRASH_DUMP
-	add_memory_region(RESERVE_LOW_MEM, MAX_MEMORY, BOOT_MEM_RAM);
-	total += MAX_MEMORY;
+	add_memory_region(reserve_low_mem, max_memory, BOOT_MEM_RAM);
+	total += max_memory;
 #else
 #ifdef CONFIG_KEXEC
 	if (crashk_size > 0) {
@@ -992,7 +992,7 @@ void __init plat_mem_setup(void)
 	 */
 	cvmx_bootmem_lock();
 	while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
-		&& (total < MAX_MEMORY)) {
+		&& (total < max_memory)) {
 		memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
 						__pa_symbol(&_end), -1,
 						0x100000,

arch/mips/configs/generic/32r1.config

+CONFIG_CPU_MIPS32_R1=y
+CONFIG_HIGHMEM=y

arch/mips/configs/generic/32r2.config

+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y

arch/mips/configs/generic/32r6.config

+CONFIG_CPU_MIPS32_R6=y
+CONFIG_HIGHMEM=y

arch/mips/configs/generic/64r1.config

+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y

arch/mips/configs/generic/64r2.config

+CONFIG_CPU_MIPS64_R2=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y

arch/mips/configs/generic/64r6.config

+CONFIG_CPU_MIPS64_R6=y
+CONFIG_64BIT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y

arch/mips/configs/generic/board-sead-3.config

+CONFIG_LEGACY_BOARD_SEAD3=y
+
+CONFIG_AUXDISPLAY=y
+CONFIG_IMG_ASCII_LCD=y
+
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SYSCON=y
+
+CONFIG_MMC=y
+CONFIG_MMC_SPI=y
+
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+CONFIG_SMSC_PHY=y
+
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y

arch/mips/configs/generic/eb.config

+CONFIG_CPU_BIG_ENDIAN=y

arch/mips/configs/generic/el.config

+CONFIG_CPU_LITTLE_ENDIAN=y

arch/mips/configs/generic/micro32r2.config

+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MICROMIPS=y
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_HIGHMEM=y

arch/mips/configs/generic_defconfig

+CONFIG_MIPS_GENERIC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_MIPS_CPS=y
+CONFIG_CPU_HAS_MSA=y
+CONFIG_HIGHMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_MIPS_O32_FP64_SUPPORT=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_TRIM_UNUSED_KSYMS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_SCSI=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_ENCRYPTION=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_OVERLAY_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon"
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set

arch/mips/configs/sead3_defconfig → arch/mips/configs/loongson1c_defconfig

-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_HZ_100=y
+CONFIG_MACH_LOONGSON32=y
+CONFIG_LOONGSON1_LS1C=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EXPERT=y
+CONFIG_PERF_EVENTS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
+CONFIG_SYN_COOKIES=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
 CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_LOONGSON1=y
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
+CONFIG_SCSI=m
 # CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_BLK_DEV_SD=m
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
 # CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_LOONGSON1=y
+# CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
+CONFIG_HID_GENERIC=m
+CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_LOONGSON1=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_ATIME_SUPPORT=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_DYNAMIC_DEBUG=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
 # CONFIG_CRYPTO_HW is not set

arch/mips/configs/malta_defconfig

@@ -230,7 +230,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -318,6 +318,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/configs/malta_kvm_defconfig

@@ -235,7 +235,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/configs/malta_kvm_guest_defconfig

@@ -234,7 +234,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -331,6 +331,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/configs/malta_qemu_32r6_defconfig

@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y

arch/mips/configs/maltaaprp_defconfig

@@ -132,6 +132,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y

arch/mips/configs/maltasmvp_defconfig

@@ -134,6 +134,8 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y

arch/mips/configs/maltasmvp_eva_defconfig

@@ -137,6 +137,8 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y

arch/mips/configs/maltaup_defconfig

@@ -131,6 +131,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y

arch/mips/configs/maltaup_xpa_defconfig

@@ -231,7 +231,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_UBI=m
 CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_FD=m
@@ -326,6 +326,8 @@ CONFIG_LIBERTAS=m
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y

arch/mips/configs/pistachio_defconfig

@@ -29,7 +29,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_CC_STACKPROTECTOR_STRONG=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
@@ -264,7 +263,6 @@ CONFIG_DMADEVICES=y
 CONFIG_IMG_MDC_DMA=y
 CONFIG_STAGING=y
 CONFIG_ASHMEM=y
-# CONFIG_ANDROID_TIMED_OUTPUT is not set
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
 CONFIG_IIO=y

arch/mips/configs/sead3micro_defconfig

-CONFIG_MIPS_SEAD3=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MICROMIPS=y
-CONFIG_HZ_100=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_SPI=y
-CONFIG_SENSORS_ADT7475=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T80=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

arch/mips/generic/Kconfig

+if MIPS_GENERIC
+
+config LEGACY_BOARDS
+	bool
+	help
+	  Select this from your board if the board must use a legacy, non-UHI,
+	  boot protocol. This will cause the kernel to scan through the list of
+	  supported machines calling their detect functions in turn if the
+	  kernel is booted without being provided with an FDT via the UHI
+	  boot protocol.
+
+config LEGACY_BOARD_SEAD3
+	bool "Support MIPS SEAD-3 boards"
+	select LEGACY_BOARDS
+	help
+	  Enable this to include support for booting on MIPS SEAD-3 FPGA-based
+	  development boards, which boot using a legacy boot protocol.
+
+endif

arch/mips/generic/Makefile

+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation;  either version 2 of the  License, or (at your
+# option) any later version.
+#
+
+obj-y += init.o
+obj-y += irq.o
+obj-y += proc.o
+
+obj-$(CONFIG_LEGACY_BOARD_SEAD3)	+= board-sead3.o

arch/mips/generic/Platform

+#
+# Copyright (C) 2016 Imagination Technologies
+# Author: Paul Burton <paul.burton@imgtec.com>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation;  either version 2 of the  License, or (at your
+# option) any later version.
+#
+
+platform-$(CONFIG_MIPS_GENERIC)	+= generic/
+cflags-$(CONFIG_MIPS_GENERIC)	+= -I$(srctree)/arch/mips/include/asm/mach-generic
+load-$(CONFIG_MIPS_GENERIC)	+= 0xffffffff80100000
+all-$(CONFIG_MIPS_GENERIC)	:= vmlinux.gz.itb

arch/mips/generic/board-sead3.c

+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "sead3: " fmt
+
+#include <linux/errno.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+
+#include <asm/fw/fw.h>
+#include <asm/io.h>
+#include <asm/machine.h>
+
+#define SEAD_CONFIG			CKSEG1ADDR(0x1b100110)
+#define SEAD_CONFIG_GIC_PRESENT		BIT(1)
+
+#define MIPS_REVISION			CKSEG1ADDR(0x1fc00010)
+#define MIPS_REVISION_MACHINE		(0xf << 4)
+#define MIPS_REVISION_MACHINE_SEAD3	(0x4 << 4)
+
+static __init bool sead3_detect(void)
+{
+	uint32_t rev;
+
+	rev = __raw_readl((void *)MIPS_REVISION);
+	return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
+}
+
+static __init int append_cmdline(void *fdt)
+{
+	int err, chosen_off;
+
+	/* find or add chosen node */
+	chosen_off = fdt_path_offset(fdt, "/chosen");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_path_offset(fdt, "/chosen@0");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+	if (chosen_off < 0) {
+		pr_err("Unable to find or add DT chosen node: %d\n",
+		       chosen_off);
+		return chosen_off;
+	}
+
+	err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+	if (err) {
+		pr_err("Unable to set bootargs property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init int append_memory(void *fdt)
+{
+	unsigned long phys_memsize, memsize;
+	__be32 mem_array[2];
+	int err, mem_off;
+	char *var;
+
+	/* find memory size from the bootloader environment */
+	var = fw_getenv("memsize");
+	if (var) {
+		err = kstrtoul(var, 0, &phys_memsize);
+		if (err) {
+			pr_err("Failed to read memsize env variable '%s'\n",
+			       var);
+			return -EINVAL;
+		}
+	} else {
+		pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+		phys_memsize = 32 << 20;
+	}
+
+	/* default to using all available RAM */
+	memsize = phys_memsize;
+
+	/* allow the user to override the usable memory */
+	var = strstr(arcs_cmdline, "memsize=");
+	if (var)
+		memsize = memparse(var + strlen("memsize="), NULL);
+
+	/* if the user says there's more RAM than we thought, believe them */
+	phys_memsize = max_t(unsigned long, phys_memsize, memsize);
+
+	/* find or add a memory node */
+	mem_off = fdt_path_offset(fdt, "/memory");
+	if (mem_off == -FDT_ERR_NOTFOUND)
+		mem_off = fdt_add_subnode(fdt, 0, "memory");
+	if (mem_off < 0) {
+		pr_err("Unable to find or add memory DT node: %d\n", mem_off);
+		return mem_off;
+	}
+
+	err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+	if (err) {
+		pr_err("Unable to set memory node device_type: %d\n", err);
+		return err;
+	}
+
+	mem_array[0] = 0;
+	mem_array[1] = cpu_to_be32(phys_memsize);
+	err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
+	if (err) {
+		pr_err("Unable to set memory regs property: %d\n", err);
+		return err;
+	}
+
+	mem_array[0] = 0;
+	mem_array[1] = cpu_to_be32(memsize);
+	err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
+			  mem_array, sizeof(mem_array));
+	if (err) {
+		pr_err("Unable to set linux,usable-memory property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init int remove_gic(void *fdt)
+{
+	const unsigned int cpu_ehci_int = 2;
+	const unsigned int cpu_uart_int = 4;
+	const unsigned int cpu_eth_int = 6;
+	int gic_off, cpu_off, uart_off, eth_off, ehci_off, err;
+	uint32_t cfg, cpu_phandle;
+
+	/* leave the GIC node intact if a GIC is present */
+	cfg = __raw_readl((uint32_t *)SEAD_CONFIG);
+	if (cfg & SEAD_CONFIG_GIC_PRESENT)
+		return 0;
+
+	gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
+	if (gic_off < 0) {
+		pr_err("unable to find DT GIC node: %d\n", gic_off);
+		return gic_off;
+	}
+
+	err = fdt_nop_node(fdt, gic_off);
+	if (err) {
+		pr_err("unable to nop GIC node\n");
+		return err;
+	}
+
+	cpu_off = fdt_node_offset_by_compatible(fdt, -1,
+			"mti,cpu-interrupt-controller");
+	if (cpu_off < 0) {
+		pr_err("unable to find CPU intc node: %d\n", cpu_off);
+		return cpu_off;
+	}
+
+	cpu_phandle = fdt_get_phandle(fdt, cpu_off);
+	if (!cpu_phandle) {
+		pr_err("unable to get CPU intc phandle\n");
+		return -EINVAL;
+	}
+
+	err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
+	if (err) {
+		pr_err("unable to set root interrupt-parent: %d\n", err);
+		return err;
+	}
+
+	uart_off = fdt_node_offset_by_compatible(fdt, -1, "ns16550a");
+	while (uart_off >= 0) {
+		err = fdt_setprop_u32(fdt, uart_off, "interrupts",
+				      cpu_uart_int);
+		if (err) {
+			pr_err("unable to set UART interrupts property: %d\n",
+			       err);
+			return err;
+		}
+
+		uart_off = fdt_node_offset_by_compatible(fdt, uart_off,
+							 "ns16550a");
+	}
+	if (uart_off != -FDT_ERR_NOTFOUND) {
+		pr_err("error searching for UART DT node: %d\n", uart_off);
+		return uart_off;
+	}
+
+	eth_off = fdt_node_offset_by_compatible(fdt, -1, "smsc,lan9115");
+	if (eth_off < 0) {
+		pr_err("unable to find ethernet DT node: %d\n", eth_off);
+		return eth_off;
+	}
+
+	err = fdt_setprop_u32(fdt, eth_off, "interrupts", cpu_eth_int);
+	if (err) {
+		pr_err("unable to set ethernet interrupts property: %d\n", err);
+		return err;
+	}
+
+	ehci_off = fdt_node_offset_by_compatible(fdt, -1, "generic-ehci");
+	if (ehci_off < 0) {
+		pr_err("unable to find EHCI DT node: %d\n", ehci_off);
+		return ehci_off;
+	}
+
+	err = fdt_setprop_u32(fdt, ehci_off, "interrupts", cpu_ehci_int);
+	if (err) {
+		pr_err("unable to set EHCI interrupts property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init int serial_config(void *fdt)
+{
+	const char *yamontty, *mode_var;
+	char mode_var_name[9], path[18], parity;
+	unsigned int uart, baud, stop_bits;
+	bool hw_flow;
+	int chosen_off, err;
+
+	yamontty = fw_getenv("yamontty");
+	if (!yamontty || !strcmp(yamontty, "tty0")) {
+		uart = 0;
+	} else if (!strcmp(yamontty, "tty1")) {
+		uart = 1;
+	} else {
+		pr_warn("yamontty environment variable '%s' invalid\n",
+			yamontty);
+		uart = 0;
+	}
+
+	baud = stop_bits = 0;
+	parity = 0;
+	hw_flow = false;
+
+	snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
+	mode_var = fw_getenv(mode_var_name);
+	if (mode_var) {
+		while (mode_var[0] >= '0' && mode_var[0] <= '9') {
+			baud *= 10;
+			baud += mode_var[0] - '0';
+			mode_var++;
+		}
+		if (mode_var[0] == ',')
+			mode_var++;
+		if (mode_var[0])
+			parity = mode_var[0];
+		if (mode_var[0] == ',')
+			mode_var++;
+		if (mode_var[0])
+			stop_bits = mode_var[0] - '0';
+		if (mode_var[0] == ',')
+			mode_var++;
+		if (!strcmp(mode_var, "hw"))
+			hw_flow = true;
+	}
+
+	if (!baud)
+		baud = 38400;
+
+	if (parity != 'e' && parity != 'n' && parity != 'o')
+		parity = 'n';
+
+	if (stop_bits != 7 && stop_bits != 8)
+		stop_bits = 8;
+
+	WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
+			 uart, baud, parity, stop_bits,
+			 hw_flow ? "r" : "") >= sizeof(path));
+
+	/* find or add chosen node */
+	chosen_off = fdt_path_offset(fdt, "/chosen");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_path_offset(fdt, "/chosen@0");
+	if (chosen_off == -FDT_ERR_NOTFOUND)
+		chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+	if (chosen_off < 0) {
+		pr_err("Unable to find or add DT chosen node: %d\n",
+		       chosen_off);
+		return chosen_off;
+	}
+
+	err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
+	if (err) {
+		pr_err("Unable to set stdout-path property: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static __init const void *sead3_fixup_fdt(const void *fdt,
+					  const void *match_data)
+{
+	static unsigned char fdt_buf[16 << 10] __initdata;
+	int err;
+
+	if (fdt_check_header(fdt))
+		panic("Corrupt DT");
+
+	/* if this isn't SEAD3, something went wrong */
+	BUG_ON(fdt_node_check_compatible(fdt, 0, "mti,sead-3"));
+
+	fw_init_cmdline();
+
+	err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+	if (err)
+		panic("Unable to open FDT: %d", err);
+
+	err = append_cmdline(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = append_memory(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = remove_gic(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = serial_config(fdt_buf);
+	if (err)
+		panic("Unable to patch FDT: %d", err);
+
+	err = fdt_pack(fdt_buf);
+	if (err)
+		panic("Unable to pack FDT: %d\n", err);
+
+	return fdt_buf;
+}
+
+static __init unsigned int sead3_measure_hpt_freq(void)
+{
+	void __iomem *status_reg = (void __iomem *)0xbf000410;
+	unsigned int freq, orig, tick = 0;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	orig = readl(status_reg) & 0x2;		      /* get original sample */
+	/* wait for transition */
+	while ((readl(status_reg) & 0x2) == orig)
+		;
+	orig = orig ^ 0x2;			      /* flip the bit */
+
+	write_c0_count(0);
+
+	/* wait 1 second (the sampling clock transitions every 10ms) */
+	while (tick < 100) {
+		/* wait for transition */
+		while ((readl(status_reg) & 0x2) == orig)
+			;
+		orig = orig ^ 0x2;			      /* flip the bit */
+		tick++;
+	}
+
+	freq = read_c0_count();
+
+	local_irq_restore(flags);
+
+	return freq;
+}
+
+extern char __dtb_sead3_begin[];
+
+MIPS_MACHINE(sead3) = {
+	.fdt = __dtb_sead3_begin,
+	.detect = sead3_detect,
+	.fixup_fdt = sead3_fixup_fdt,
+	.measure_hpt_freq = sead3_measure_hpt_freq,
+};

arch/mips/generic/init.c

+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/fw/fw.h>
+#include <asm/irq_cpu.h>
+#include <asm/machine.h>
+#include <asm/mips-cpc.h>
+#include <asm/prom.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+static __initdata const void *fdt;
+static __initdata const struct mips_machine *mach;
+static __initdata const void *mach_match_data;
+
+void __init prom_init(void)
+{
+	const struct mips_machine *check_mach;
+	const struct of_device_id *match;
+
+	if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+		/*
+		 * We booted using the UHI boot protocol, so we have been
+		 * provided with the appropriate device tree for the board.
+		 * Make use of it & search for any machine struct based upon
+		 * the root compatible string.
+		 */
+		fdt = (void *)fw_arg1;
+
+		for_each_mips_machine(check_mach) {
+			match = mips_machine_is_compatible(check_mach, fdt);
+			if (match) {
+				mach = check_mach;
+				mach_match_data = match->data;
+				break;
+			}
+		}
+	} else if (IS_ENABLED(CONFIG_LEGACY_BOARDS)) {
+		/*
+		 * We weren't booted using the UHI boot protocol, but do
+		 * support some number of boards with legacy boot protocols.
+		 * Attempt to find the right one.
+		 */
+		for_each_mips_machine(check_mach) {
+			if (!check_mach->detect)
+				continue;
+
+			if (!check_mach->detect())
+				continue;
+
+			mach = check_mach;
+		}
+
+		/*
+		 * If we don't recognise the machine then we can't continue, so
+		 * die here.
+		 */
+		BUG_ON(!mach);
+
+		/* Retrieve the machine's FDT */
+		fdt = mach->fdt;
+	}
+
+	BUG_ON(!fdt);
+}
+
+void __init *plat_get_fdt(void)
+{
+	return (void *)fdt;
+}
+
+void __init plat_mem_setup(void)
+{
+	if (mach && mach->fixup_fdt)
+		fdt = mach->fixup_fdt(fdt, mach_match_data);
+
+	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+	__dt_setup_arch((void *)fdt);
+}
+
+void __init device_tree_init(void)
+{
+	int err;
+
+	unflatten_and_copy_device_tree();
+	mips_cpc_probe();
+
+	err = register_cps_smp_ops();
+	if (err)
+		err = register_up_smp_ops();
+}
+
+void __init plat_time_init(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+
+	of_clk_init(NULL);
+
+	if (!cpu_has_counter) {
+		mips_hpt_frequency = 0;
+	} else if (mach && mach->measure_hpt_freq) {
+		mips_hpt_frequency = mach->measure_hpt_freq();
+	} else {
+		np = of_get_cpu_node(0, NULL);
+		if (!np) {
+			pr_err("Failed to get CPU node\n");
+			return;
+		}
+
+		clk = of_clk_get(np, 0);
+		if (IS_ERR(clk)) {
+			pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+			return;
+		}
+
+		mips_hpt_frequency = clk_get_rate(clk);
+		clk_put(clk);
+
+		switch (boot_cpu_type()) {
+		case CPU_20KC:
+		case CPU_25KF:
+			/* The counter runs at the CPU clock rate */
+			break;
+		default:
+			/* The counter runs at half the CPU clock rate */
+			mips_hpt_frequency /= 2;
+			break;
+		}
+	}
+
+	clocksource_probe();
+}
+
+void __init arch_init_irq(void)
+{
+	struct device_node *intc_node;
+
+	intc_node = of_find_compatible_node(NULL, NULL,
+					    "mti,cpu-interrupt-controller");
+	if (!cpu_has_veic && !intc_node)
+		mips_cpu_irq_init();
+
+	irqchip_init();
+}
+
+static int __init publish_devices(void)
+{
+	if (!of_have_populated_dt())
+		panic("Device-tree not present");
+
+	if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
+		panic("Failed to populate DT");
+
+	return 0;
+}
+arch_initcall(publish_devices);
+
+void __init prom_free_prom_memory(void)
+{
+}

arch/mips/generic/irq.c

+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+
+int get_c0_fdc_int(void)
+{
+	int mips_cpu_fdc_irq;
+
+	if (cpu_has_veic)
+		panic("Unimplemented!");
+	else if (gic_present)
+		mips_cpu_fdc_irq = gic_get_c0_fdc_int();
+	else if (cp0_fdc_irq >= 0)
+		mips_cpu_fdc_irq = MIPS_CPU_IRQ_BASE + cp0_fdc_irq;
+	else
+		mips_cpu_fdc_irq = -1;
+
+	return mips_cpu_fdc_irq;
+}
+
+int get_c0_perfcount_int(void)
+{
+	int mips_cpu_perf_irq;
+
+	if (cpu_has_veic)
+		panic("Unimplemented!");
+	else if (gic_present)
+		mips_cpu_perf_irq = gic_get_c0_perfcount_int();
+	else if (cp0_perfcount_irq >= 0)
+		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+	else
+		mips_cpu_perf_irq = -1;
+
+	return mips_cpu_perf_irq;
+}
+
+unsigned int get_c0_compare_int(void)
+{
+	int mips_cpu_timer_irq;
+
+	if (cpu_has_veic)
+		panic("Unimplemented!");
+	else if (gic_present)
+		mips_cpu_timer_irq = gic_get_c0_compare_int();
+	else
+		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+
+	return mips_cpu_timer_irq;
+}

arch/mips/generic/proc.c

+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of.h>
+
+#include <asm/bootinfo.h>
+
+const char *get_system_type(void)
+{
+	const char *str;
+	int err;
+
+	err = of_property_read_string(of_root, "model", &str);
+	if (!err)
+		return str;
+
+	err = of_property_read_string_index(of_root, "compatible", 0, &str);
+	if (!err)
+		return str;
+
+	return "Unknown";
+}

arch/mips/generic/vmlinux.its.S

+/dts-v1/;
+
+/ {
+	description = KERNEL_NAME;
+	#address-cells = <ADDR_CELLS>;
+
+	images {
+		kernel@0 {
+			description = KERNEL_NAME;
+			data = /incbin/(VMLINUX_BINARY);
+			type = "kernel";
+			arch = "mips";
+			os = "linux";
+			compression = VMLINUX_COMPRESSION;
+			load = /bits/ ADDR_BITS <VMLINUX_LOAD_ADDRESS>;
+			entry = /bits/ ADDR_BITS <VMLINUX_ENTRY_ADDRESS>;
+			hash@0 {
+				algo = "sha1";
+			};
+		};
+	};
+
+	configurations {
+		default = "conf@default";
+
+		conf@default {
+			description = "Generic Linux kernel";
+			kernel = "kernel@0";
+		};
+	};
+};

arch/mips/include/asm/addrspace.h

@@ -126,8 +126,7 @@
 #define PHYS_TO_XKSEG_UNCACHED(p)	PHYS_TO_XKPHYS(K_CALG_UNCACHED, (p))
 #define PHYS_TO_XKSEG_CACHED(p)		PHYS_TO_XKPHYS(K_CALG_COH_SHAREABLE, (p))
 #define XKPHYS_TO_PHYS(p)		((p) & TO_PHYS_MASK)
-#define PHYS_TO_XKPHYS(cm, a)		(_CONST64_(0x8000000000000000) | \
-					 (_CONST64_(cm) << 59) | (a))
+#define PHYS_TO_XKPHYS(cm, a)		(XKPHYS | (_ACAST64_(cm) << 59) | (a))
 
 /*
  * The ultimate limited of the 64-bit MIPS architecture:  2 bits for selecting

arch/mips/include/asm/barrier.h

@@ -10,6 +10,102 @@
 
 #include <asm/addrspace.h>
 
+/*
+ * Sync types defined by the MIPS architecture (document MD00087 table 6.5)
+ * These values are used with the sync instruction to perform memory barriers.
+ * Types of ordering guarantees available through the SYNC instruction:
+ * - Completion Barriers
+ * - Ordering Barriers
+ * As compared to the completion barrier, the ordering barrier is a
+ * lighter-weight operation as it does not require the specified instructions
+ * before the SYNC to be already completed. Instead it only requires that those
+ * specified instructions which are subsequent to the SYNC in the instruction
+ * stream are never re-ordered for processing ahead of the specified
+ * instructions which are before the SYNC in the instruction stream.
+ * This potentially reduces how many cycles the barrier instruction must stall
+ * before it completes.
+ * Implementations that do not use any of the non-zero values of stype to define
+ * different barriers, such as ordering barriers, must make those stype values
+ * act the same as stype zero.
+ */
+
+/*
+ * Completion barriers:
+ * - Every synchronizable specified memory instruction (loads or stores or both)
+ *   that occurs in the instruction stream before the SYNC instruction must be
+ *   already globally performed before any synchronizable specified memory
+ *   instructions that occur after the SYNC are allowed to be performed, with
+ *   respect to any other processor or coherent I/O module.
+ *
+ * - The barrier does not guarantee the order in which instruction fetches are
+ *   performed.
+ *
+ * - A stype value of zero will always be defined such that it performs the most
+ *   complete set of synchronization operations that are defined.This means
+ *   stype zero always does a completion barrier that affects both loads and
+ *   stores preceding the SYNC instruction and both loads and stores that are
+ *   subsequent to the SYNC instruction. Non-zero values of stype may be defined
+ *   by the architecture or specific implementations to perform synchronization
+ *   behaviors that are less complete than that of stype zero. If an
+ *   implementation does not use one of these non-zero values to define a
+ *   different synchronization behavior, then that non-zero value of stype must
+ *   act the same as stype zero completion barrier. This allows software written
+ *   for an implementation with a lighter-weight barrier to work on another
+ *   implementation which only implements the stype zero completion barrier.
+ *
+ * - A completion barrier is required, potentially in conjunction with SSNOP (in
+ *   Release 1 of the Architecture) or EHB (in Release 2 of the Architecture),
+ *   to guarantee that memory reference results are visible across operating
+ *   mode changes. For example, a completion barrier is required on some
+ *   implementations on entry to and exit from Debug Mode to guarantee that
+ *   memory effects are handled correctly.
+ */
+
+/*
+ * stype 0 - A completion barrier that affects preceding loads and stores and
+ * subsequent loads and stores.
+ * Older instructions which must reach the load/store ordering point before the
+ * SYNC instruction completes: Loads, Stores
+ * Younger instructions which must reach the load/store ordering point only
+ * after the SYNC instruction completes: Loads, Stores
+ * Older instructions which must be globally performed when the SYNC instruction
+ * completes: Loads, Stores
+ */
+#define STYPE_SYNC 0x0
+
+/*
+ * Ordering barriers:
+ * - Every synchronizable specified memory instruction (loads or stores or both)
+ *   that occurs in the instruction stream before the SYNC instruction must
+ *   reach a stage in the load/store datapath after which no instruction
+ *   re-ordering is possible before any synchronizable specified memory
+ *   instruction which occurs after the SYNC instruction in the instruction
+ *   stream reaches the same stage in the load/store datapath.
+ *
+ * - If any memory instruction before the SYNC instruction in program order,
+ *   generates a memory request to the external memory and any memory
+ *   instruction after the SYNC instruction in program order also generates a
+ *   memory request to external memory, the memory request belonging to the
+ *   older instruction must be globally performed before the time the memory
+ *   request belonging to the younger instruction is globally performed.
+ *
+ * - The barrier does not guarantee the order in which instruction fetches are
+ *   performed.
+ */
+
+/*
+ * stype 0x10 - An ordering barrier that affects preceding loads and stores and
+ * subsequent loads and stores.
+ * Older instructions which must reach the load/store ordering point before the
+ * SYNC instruction completes: Loads, Stores
+ * Younger instructions which must reach the load/store ordering point only
+ * after the SYNC instruction completes: Loads, Stores
+ * Older instructions which must be globally performed when the SYNC instruction
+ * completes: N/A
+ */
+#define STYPE_SYNC_MB 0x10
+
+
 #ifdef CONFIG_CPU_HAS_SYNC
 #define __sync()				\
 	__asm__ __volatile__(			\

arch/mips/include/asm/cacheflush.h

@@ -28,6 +28,7 @@
  *  - flush_cache_sigtramp() flush signal trampoline
  *  - flush_icache_all() flush the entire instruction cache
  *  - flush_data_cache_page() flushes a page from the data cache
+ *  - __flush_icache_user_range(start, end) flushes range of user instructions
  */
 
  /*
@@ -80,6 +81,10 @@ static inline void flush_icache_page(struct vm_area_struct *vma,
 
 extern void (*flush_icache_range)(unsigned long start, unsigned long end);
 extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*__flush_icache_user_range)(unsigned long start,
+					 unsigned long end);
+extern void (*__local_flush_icache_user_range)(unsigned long start,
+					       unsigned long end);
 
 extern void (*__flush_cache_vmap)(void);
 

arch/mips/include/asm/cpu-type.h

@@ -24,7 +24,8 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_LOONGSON3:
 #endif
 
-#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \
+    defined(CONFIG_SYS_HAS_CPU_LOONGSON1C)
 	case CPU_LOONGSON1:
 #endif
 

arch/mips/include/asm/cpu.h

@@ -240,6 +240,7 @@
 #define PRID_REV_VR4130		0x0080
 #define PRID_REV_34K_V1_0_2	0x0022
 #define PRID_REV_LOONGSON1B	0x0020
+#define PRID_REV_LOONGSON1C	0x0020	/* Same as Loongson-1B */
 #define PRID_REV_LOONGSON2E	0x0002
 #define PRID_REV_LOONGSON2F	0x0003
 #define PRID_REV_LOONGSON3A_R1	0x0005

arch/mips/include/asm/device.h

@@ -11,6 +11,11 @@ struct dma_map_ops;
 struct dev_archdata {
 	/* DMA operations on that device */
 	struct dma_map_ops *dma_ops;
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+	/* Non-zero if DMA is coherent with CPU caches */
+	bool dma_coherent;
+#endif
 };
 
 struct pdev_archdata {

arch/mips/include/asm/dma-coherence.h

@@ -9,14 +9,22 @@
 #ifndef __ASM_DMA_COHERENCE_H
 #define __ASM_DMA_COHERENCE_H
 
-#ifdef CONFIG_DMA_MAYBE_COHERENT
-extern int coherentio;
+enum coherent_io_user_state {
+	IO_COHERENCE_DEFAULT,
+	IO_COHERENCE_ENABLED,
+	IO_COHERENCE_DISABLED,
+};
+
+#if defined(CONFIG_DMA_PERDEV_COHERENT)
+/* Don't provide (hw_)coherentio to avoid misuse */
+#elif defined(CONFIG_DMA_MAYBE_COHERENT)
+extern enum coherent_io_user_state coherentio;
 extern int hw_coherentio;
 #else
 #ifdef CONFIG_DMA_COHERENT
-#define coherentio	1
+#define coherentio	IO_COHERENCE_ENABLED
 #else
-#define coherentio	0
+#define coherentio	IO_COHERENCE_DISABLED
 #endif
 #define hw_coherentio	0
 #endif /* CONFIG_DMA_MAYBE_COHERENT */

arch/mips/include/asm/mach-generic/floppy.h

@@ -115,11 +115,7 @@ static inline unsigned long fd_getfdaddr1(void)
 
 static inline unsigned long fd_dma_mem_alloc(unsigned long size)
 {
-	unsigned long mem;
-
-	mem = __get_dma_pages(GFP_KERNEL, get_order(size));
-
-	return mem;
+	return __get_dma_pages(GFP_KERNEL, get_order(size));
 }
 
 static inline void fd_dma_mem_free(unsigned long addr, unsigned long size)