[SCSI] lpfc 8.2.4 : Add parameters to enable and disable heartbeat and hba resets

Add parameters to enable and disable heartbeat and hba resets
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/lpfc/lpfc.h

@@ -471,7 +471,8 @@ struct lpfc_hba {
 	uint64_t cfg_soft_wwnn;
 	uint64_t cfg_soft_wwpn;
 	uint32_t cfg_hba_queue_depth;
-
+	uint32_t cfg_enable_hba_reset;
+	uint32_t cfg_enable_hba_heartbeat;
 
 	lpfc_vpd_t vpd;		/* vital product data */
 

drivers/scsi/lpfc/lpfc_attr.c

@@ -342,6 +342,9 @@ lpfc_selective_reset(struct lpfc_hba *phba)
 	struct completion online_compl;
 	int status = 0;
 
+	if (!phba->cfg_enable_hba_reset)
+		return -EIO;
+
 	status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
 
 	if (status != 0)
@@ -415,6 +418,8 @@ lpfc_board_mode_store(struct class_device *cdev, const char *buf, size_t count)
 	struct completion online_compl;
 	int status=0;
 
+	if (!phba->cfg_enable_hba_reset)
+		return -EACCES;
 	init_completion(&online_compl);
 
 	if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
@@ -979,6 +984,8 @@ lpfc_soft_wwpn_store(struct class_device *cdev, const char *buf, size_t count)
 	unsigned int i, j, cnt=count;
 	u8 wwpn[8];
 
+	if (!phba->cfg_enable_hba_reset)
+		return -EACCES;
 	spin_lock_irq(&phba->hbalock);
 	if (phba->over_temp_state == HBA_OVER_TEMP) {
 		spin_unlock_irq(&phba->hbalock);
@@ -1506,7 +1513,21 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
 */
 LPFC_ATTR_R(use_msi, 0, 0, 1, "Use Message Signaled Interrupts, if possible");
 
+/*
+# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
+#       0  = HBA resets disabled
+#       1  = HBA resets enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver.");
 
+/*
+# lpfc_enable_hba_heartbeat: Enable HBA heartbeat timer..
+#       0  = HBA Heartbeat disabled
+#       1  = HBA Heartbeat enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
 
 struct class_device_attribute *lpfc_hba_attrs[] = {
 	&class_device_attr_info,
@@ -1558,6 +1579,8 @@ struct class_device_attribute *lpfc_hba_attrs[] = {
 	&class_device_attr_lpfc_soft_wwnn,
 	&class_device_attr_lpfc_soft_wwpn,
 	&class_device_attr_lpfc_soft_wwn_enable,
+	&class_device_attr_lpfc_enable_hba_reset,
+	&class_device_attr_lpfc_enable_hba_heartbeat,
 	NULL,
 };
 
@@ -2448,6 +2471,8 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
+	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
+	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
 	phba->cfg_poll = lpfc_poll;
 	phba->cfg_soft_wwnn = 0L;
 	phba->cfg_soft_wwpn = 0L;

drivers/scsi/lpfc/lpfc_init.c

@@ -594,8 +594,8 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
 	}
 	phba->elsbuf_prev_cnt = phba->elsbuf_cnt;
 
-
 	/* If there is no heart beat outstanding, issue a heartbeat command */
+	if (phba->cfg_enable_hba_heartbeat) {
 		if (!phba->hb_outstanding) {
 			pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
 			if (!pmboxq) {
@@ -621,12 +621,12 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
 			return;
 		} else {
 			/*
-		 * If heart beat timeout called with hb_outstanding set we
-		 * need to take the HBA offline.
+			* If heart beat timeout called with hb_outstanding set
+			* we need to take the HBA offline.
 			*/
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0459 Adapter heartbeat failure, taking "
-				"this port offline.\n");
+					"0459 Adapter heartbeat failure, "
+					"taking this port offline.\n");
 
 			spin_lock_irq(&phba->hbalock);
 			psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
@@ -638,6 +638,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
 			phba->link_state = LPFC_HBA_ERROR;
 			lpfc_hba_down_post(phba);
 		}
+	}
 }
 
 /************************************************************************/
@@ -665,6 +666,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 	 * since we cannot communicate with the pci card anyway. */
 	if (pci_channel_offline(phba->pcidev))
 		return;
+	/* If resets are disabled then leave the HBA alone and return */
+	if (!phba->cfg_enable_hba_reset)
+		return;
 
 	if (phba->work_hs & HS_FFER6 ||
 	    phba->work_hs & HS_FFER5) {

drivers/scsi/lpfc/lpfc_sli.c

@@ -2559,6 +2559,11 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 	 * lpfc_offline calls lpfc_sli_hba_down which will clean up
 	 * on oustanding mailbox commands.
 	 */
+	/* If resets are disabled then set error state and return. */
+	if (!phba->cfg_enable_hba_reset) {
+		phba->link_state = LPFC_HBA_ERROR;
+		return;
+	}
 	lpfc_offline_prep(phba);
 	lpfc_offline(phba);
 	lpfc_sli_brdrestart(phba);